RESUMO
C3-symmetry is a type of star-shaped molecule consisting of a central core and three symmetrically attached chains. These molecules are used in drug discovery due to their unique three-fold rotational symmetry, which allows for specific binding interactions and improved molecular recognition. In this text, we provide an overview of synthetic approaches with C3-symmetry as a pharmaceutical tool: progress, challenges, and opportunities. C3-symmetric ligands offer both challenges and opportunities in drug design. Their unique symmetry can enhance binding interactions, but careful consideration of rigidity, synthetic complexity, and target compatibility is crucial. Further research and advancements in synthetic methods and modeling tools will likely drive their exploration in drug discovery, leading to the discovery of potent C3-symmetric ligands.
Assuntos
Desenho de Fármacos , Descoberta de Drogas , LigantesRESUMO
Natural soil minerals often contain numerous impurities, resulting in comparatively lower catalytic activity. Tropical soils are viewed as poor from soil organic matter, cations, and anions, which are considered the main impurities in the soil that are restricted to utilizing natural minerals as a catalyst. In this regard, the dissolved iron and hematite crystals that presented naturally in tropical soil were evaluated to activate oxidants and degrade pyrene. The optimum results obtained in this study were 73 %, and the rate constant was 0.0553 h-1 under experimental conditions [pyrene] = 300 mg/50 g, pH = 7, T = 55 °C, airflow = 260 mL/min, [Persulfate (PS)] = 1.0 g/L, and humic acid (HA) ( % w/w) = 0.5 %. The soil characterization analysis after the remediation process showed an increase in moieties and cracks of the soil aggregate, and a decline in the iron and aluminium contents. The scavengers test revealed that both SO4â¢- and O2â¢- were responsible for the pyrene degradation, while HO⢠had a minor role in the degradation process. In addition, the monitoring of by-products, degradation pathways, and toxicity assessment were also investigated. This system is considered an efficient, green method, and could provide a step forward to develop low-cost soil remediation for full-scale implementation.
Assuntos
Ferro , Poluentes do Solo , Ferro/química , Solo/química , Poluentes do Solo/química , Minerais/química , Pirenos , Oxidantes , OxirreduçãoRESUMO
Hole-transporting materials (HTMs) are crucial for obtaining the stability and high efficiency of perovskite solar cells (PSCs). However, the current state-of-the-art n-i-p PSCs relied on the use of 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-OMeTAD) exhibit inferior intrinsic and ambient stability due to the p-dopant and hydrophilic Li-TFSI additive. In this study, a new spiro-type HTM with a critical quasi-planar core (Z-W-03) is developed to improve both the thermal and ambient stability of PSCs. The results suggest that the planar carbazole structure effectively passivates the trap states compared to the triphenylamine with a propeller-like conformation in spiro-OMeTAD. This passivation effect leads to the shallower trap states when the quasi-planar HTMs interact with the Pb-dimer. Consequently, the device using Z-W-03 achieves a higher Voc of 1.178 V compared to the spiro-OMeTAD's 1.155 V, resulting in an enhanced efficiency of 24.02%. In addition, the double-column π-π stacking of Z-W-03 results in high hole mobility (~10-4 cm2 V-1 s-1) even without p-dopant. Moreover, when the surface interface is modified, the undoped Z-W-03 device can achieve an efficiency of nearly 23%. Compared to the PSCs using spiro-OMeTAD, those with Z-W-03 exhibit enhanced stability under N2 and ambient conditions.
RESUMO
Herein, we report an interesting finding about the new application of oxytetracycline (OTC), as a fluorescent probe for the detection of calcium ion (Ca2+), which proved that it can offer an expeditious, highly sensitive, and selective detection method for Ca2+. Upon the addition of Ca2+, the fluorescence of OTC could be significantly enhanced with rapid response and high sensitivity, and achieved a good limit of detection as low as 125 nM in aqueous solution. The complex formed via Ca2+ coordinating to the hydroxyl group of OTC contributes to the fluorescence enhancement, which has been proved by several characterization methods including UV-vis analysis, binding constant determination, and fluorescence titration. The method avoided complexity for EDTA measurement of Ca2+ in running water as proposed previously. Taking advantage of good availability, stability and operability, the OTC was further successfully applied to the detection of Ca2+ in a real environment. Graphical Abstract.
Assuntos
Cálcio/análise , Fluorescência , Corantes Fluorescentes/química , Oxitetraciclina/química , Íons/análise , Espectrometria de FluorescênciaRESUMO
The development of an analytical method for selective and sensitive detection of chlortetracycline (CTC), an often overused broad spectrum antibiotic, is important and challenging in environmental and health monitoring. This paper reports a zinc based metal-organic framework of pyromellitic acid (Zn-BTEC), which has been found to greatly enhance the aggregation-induced emission (AIE) of chlortetracycline. The unique emission response of CTC on Zn-BTEC has been extensively examined and applied for the sensitive detection of CTC on the basis of fluorescence intensity of AIE, and a limit of detection (LOD) was estimated to be 28 nM. A rational mechanism has been proposed based on the porous structure of Zn-BTEC, and the CTC molecules would defuse into the rigid MOF structure and assemble or aggregate, leading to fluorescence enhancement of CTC. Interestingly, the Zn-BTEC materials could discriminate CTC from other TC antibiotics with high selectivity. We have further demonstrated that the Zn-BTEC materials are successfully applied for the sensitive and selective determination of CTC in real samples of fish and urine.
Assuntos
Antibacterianos/análise , Clortetraciclina/análise , Peixes/metabolismo , Fluorescência , Estruturas Metalorgânicas/química , Adulto , Animais , Antibacterianos/química , Clortetraciclina/química , Humanos , Limite de Detecção , Masculino , UrináliseRESUMO
A series of scarce N-alkyl-2,5-unsubstituted/monosubstituted fulleropyrrolidines were synthesized in moderate to excellent yields by the simple one-step thermal reaction of [60]fullerene with primary/secondary amines in the presence of paraformaldehyde without the addition of valuable metal salts. Intriguingly, the reaction with primary amines unexpectedly afforded N-alkyl-2,5-unsubstituted fulleropyrrolidines instead of the anticipated 2,5-monosubstituted fulleropyrrolidines. A plausible reaction pathway is proposed to elucidate the above-mentioned reaction process based on the experimental results.
RESUMO
A series of scarce tetrahydropyridinofullerenes were synthesized by the metal-free-mediated reaction of [60]fullerene with cheap and easily available α-methyl-substituted arylmethanamines and aldehydes in the presence of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) and 4-dimethylaminopyridine (DMAP) in moderate to good yields comparable to the previously reported data for most monoadducts. The in situ generation of azadienes played a crucial role in the successful synthesis of tetrahydropyridinofullerenes. A plausible reaction mechanism was proposed to elucidate the reaction process.
RESUMO
A series of scarce fulleropyrrolidin-2-ols were synthesized by the facile one-step reaction of [60] fullerene with inexpensive and readily accessible amines and 2,2-disubstituted acetaldehydes without the addition of valuable metal salts in moderate yields, comparable to those for most monoadducts reported previously. This strategy exhibits a broad substrate scope and excellent functional group tolerance. A plausible reaction pathway for the formation of fulleropyrrolidin-2-ols is proposed to elucidate the above reaction process.
RESUMO
The reaction of [60]fullerene with aromatic aldehydes and triethylamine/diethylamine in the absence or presence of manganese(iii) acetate under air conditions afforded a series of N-ethyl-2-arylvinyl-5-methyl fulleropyrrolidines in moderate to good yields, which would be difficult to synthesize by reported protocols. The in situ generation of arylvinyl aldehydes by the aldol reaction of aromatic aldehydes with acetaldehyde from an unusual C-N bond cleavage of triethylamine/diethylamine played a crucial role in the successful preparation of the corresponding fulleropyrrolidines. Depending on the reaction conditions, both cis and trans isomers of fulleropyrrolidines could be selectively synthesized. Cis isomers as major products could be obtained by reacting with triethylamine at 160 °C without the addition of manganese(iii) acetate, while trans isomers as major products, with rare exceptions, could be observed via the reaction with diethylamine at 120 °C under the assistance of manganese(iii) acetate. Moreover, the in situ generated arylvinyl aldehydes displayed higher reactivity towards diethylamine as compared with aryl aldehydes, leading to the formation of arylvinyl-substituted fulleropyrrolidines. A plausible formation mechanism for fulleropyrrolidines was provided based on the experimental observations.
RESUMO
This paper reported a dual-mode probe for D-penicillamine on the basis of pH-mediated gold nanoparticles aggregation and fluorescence resonance energy transfer (FRET) from carbon dots. D-penicillamine is a zwitterionic compound and has different forms depending on specific pH ranges. The thiol group of D-penicillamine has high affinity towards the surface of gold nanoparticles and can replace other surface ligands. When pH values were close to its isoelectrical point (pH(I)), the D-penicillamine capped gold nanoparticles aggregated through hydrogen bonding or electrostatic interactions, resulting in the releasing of carbon dots from gold nanoparticles. The dual-mode probe consisted of fluorescent carbon dots and gold nanoparticles, and the fluorescence of carbon dots was quenched by the attached gold nanoparticles due to the FRET. Then, the fluorescence can be recovered in presence of D-penicillamine due to the gold nanoparticles aggregation in specific pH range. Under the optimum conditions, the probe has linear response for D-penicillamine in the 0.25-1.5 µM concentration range with a detection limit of 0.085 µM. This method provides a potential application in sensitive detection of D-penicillamine.
Assuntos
Antibacterianos/análise , Carbono/química , Corantes Fluorescentes/química , Ouro/química , Nanopartículas Metálicas/química , Penicilamina/análise , Antibacterianos/química , Transferência Ressonante de Energia de Fluorescência , Concentração de Íons de Hidrogênio , Limite de Detecção , Modelos Moleculares , Conformação Molecular , Penicilamina/química , Pontos Quânticos/químicaRESUMO
In this study, we have developed a facile method for preparation of highly fluorescent Au nanoclusters (AuNCs) using 11-mercaptoundecanoic acid (MUA) as both the reducing and stabilizing agent. The as-prepared MUA functionalized AuNCs (MUA-AuNCs) have good water solubility, excellent photostability, and strong fluorescence emission at 610 nm with a quantum yield of 7.28% in water. The fluorescence of MUA-AuNCs was first quenched by copper ions through electron transfer, subsequently caused obvious restoration by competitive effect after adding penicillamine, making it a potential fluorescent sensor for penicillamine with a detection limit of 0.08 µM. Furthermore, the newly designed fluorescence "on-off-on" assay was explored for the measurement of penicillamine in complex real water and urine samples with satisfactory results.
Assuntos
Antirreumáticos/análise , Ácidos Graxos/química , Corantes Fluorescentes/química , Ouro/química , Nanopartículas Metálicas/química , Penicilamina/análise , Compostos de Sulfidrila/química , Poluentes Químicos da Água/análise , Antídotos/análise , Antídotos/farmacocinética , Antirreumáticos/urina , Cobre/química , Excipientes/química , Humanos , Lagos/análise , Limite de Detecção , Nanopartículas Metálicas/ultraestrutura , Penicilamina/urina , Substâncias Redutoras/química , Espectrometria de Fluorescência/métodos , Poluentes Químicos da Água/urinaRESUMO
The contribution of volatile organic acids to chloride depletion still remains unclear under ambient conditions in the coast and inland. In this work, the heterogeneous reaction of HCOOH on the NaCl surface at a series of relative humidities (RHs) was investigated using diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The formate was found to be formed on NaCl surface under dry and wet conditions, accompanied by the corresponding chloride depletion. The adsorbed HCOOH and the formation of formate on NaCl surface decreased with increasing RH below 30% RH. The adsorbed HCOOH decreased, while the formation of formate increased with enhanced RH at 45-70% RH. The variation in the formation of formate with RH suggests that chloride depletion may undergo similar changes. Additionally, the mechanism and kinetics for uptake of HCOOH on NaCl surface at various RHs were discussed and analyzed. Our results highlight the role of heterogeneous chemistry of volatile organic acid in the chloride depletion of NaCl in the coast and inland.
RESUMO
Biochar, as a cost-efficient adsorbent, is of major interest in the removal of heavy metals from wastewater. Herein, batch experiments were conducted to investigate the performance of biochar derived from rice straw for the removal of Ni(II) as a function of various environmental conditions. The results showed that Ni(II) sorption was strongly dependent on pH but independent of ionic strength and the effects of electrolyte ions could be negligible over the whole pH range. Ionic exchange and inner-sphere surface complexation dominated the sorption of Ni(II). Humic/fulvic acids clearly enhanced the Ni(II) sorption at pH <7.2 but inhibited the sorption at pH >7.2. The sorption reached equilibrium within 10 hours, and the kinetics followed a pseudo-second-order rate model. Any of the Langmuir, Freundlich, or Dubinin-Radushkevich isotherm models could describe the sorption well, but the Langmuir model described it best. The maximum sorption capacity calculated from the Langmuir model was 0.257 m·mol/g. The thermodynamic parameters suggested that Ni(II) sorption was a spontaneous and endothermic process and was enhanced at high temperature. The results of this work indicate that biochar derived from rice straw may be a valuable bio-sorbent for Ni(II) in aqueous solutions, but it still requires further modification.
Assuntos
Carvão Vegetal/química , Níquel/química , Oryza , Adsorção , Concentração de Íons de Hidrogênio , Cinética , Metais Pesados , Concentração Osmolar , Termodinâmica , Água , Poluentes Químicos da ÁguaRESUMO
The metal-free-mediated thermal reaction of [60]fullerene with aromatic aldehydes and inactive primary amines bearing electron-donating groups at the α-position afforded a series of 2-aryl-5-alkyl-fulleropyrrolidines, including the scarce 2-aryl-5-benzyl-fulleropyrrolidines as a mixture of cis and trans isomers. With rare exceptions, the mixture of cis and trans isomers could be easily isolated by column chromatography, with a preference of cis isomers as major products. A plausible mechanism for the formation of fulleropyrrolidines is also proposed.
RESUMO
A series of scarce fulleropyrrolines were synthesized via DMAP-mediated one-step reaction of [60]fullerene with commercially inexpensive aromatic aldehydes and arylmethanamines in the absence or presence of manganese(III) acetate. In the case of aminodiphenylmethane, novel 2,5,5-trisubstituted fulleropyrrolines could be easily obtained without the addition of manganese(III) acetate. As for arylmethanamines without α-substitutions, the addition of manganese(III) acetate was required to suppress the formation of fulleropyrrolidines, in order to generate the desired 2,5-disubstituted fulleropyrrolines. Two tautomers were produced as expected when different aryl groups (Ar1 ≠ Ar2) from aromatic aldehydes and arylmethanamines were employed in the synthesis. A plausible reaction mechanism for the formation of fulleropyrrolines is proposed.
RESUMO
As a promising conjugated polymer, binary carbon nitride has attracted extensive attention as a metal-free and visible-light-responsive photocatalyst in the area of photon-involving purification of water and air. Herein, we report sulfur-doped polymeric carbon nitride microrods that are synthesized through thermal polymerization based on trithiocyanuric acid and melamine (TM) supramolecular aggregates. By tuning the polymerization temperature, a series of sulfur-doped carbon nitride microrods are prepared. The degradation of Rhodamine B (RhB) and the reduction of hexavalent chromium Cr(VI) are selected as probe reactions to evaluate the photocatalytic activities. Results show that increasing pyrolysis temperature leads to a large specific surface area, strong visible-light absorption, and accelerated electron-hole separation. Compared to bulk carbon nitride, the highly porous sulfur-doped carbon nitride microrods fabricated at 650 °C exhibit remarkably higher photocatalytic activity for degradation of RhB and reduction of Cr(VI). This work highlights the importance of self-assembly approach and temperature-control strategy in the synthesis of photoactive materials for environmental remediation.
Assuntos
Cromo/química , Poluentes Ambientais/química , Nitrilas/química , Processos Fotoquímicos , Polímeros/química , Enxofre/química , Catálise , Cromo/análise , Poluentes Ambientais/análise , Modelos Moleculares , Rodaminas/química , Espectroscopia de Infravermelho com Transformada de Fourier , Difração de Raios XRESUMO
Polyethersulfone has been widely used as a promising material in medical applications and waste-treatment membranes since it provides excellent mechanical and thermal properties. Hydrophobicity of polyethersulfone is considered one main disadvantage of using this material because hydrophobic surface causes biofouling effects to the membrane which is always thought to be a serious limitation to the use of polyethersulfone in membrane technology. Chemical modification to the material is a promising solution to this problem. More specifically surface modification is an excellent technique to introduce hydrophilic properties and functional groups to the polyethersulfone membrane surface. This review covers chemical modifications of the polyethersulfone and covers different methods used to enhance the hydrophilicity of polyethersulfone membrane. In particular, the addition of amino functional groups to polyethersulfone is used as a fundamental method either to introduce hydrophilic properties or introduce nanomaterials to the surface of polyethersulfone membrane. This work reviews also previous research reports explored the use of amino functionalized polyethersulfone with different nanomaterials to induce biological activity and reduce fouling effects of the fabricated membrane.
RESUMO
Robust, functional, and flame retardant coatings are attractive in various fields such as building construction, food packaging, electronics encapsulation, and so on. Here, strong, colorful, and fire-retardant micrometer-thick hybrid coatings are reported, which can be constructed via an enhanced layer-by-layer assembly of graphene oxide (GO) nanosheets and layered double hydroxide (LDH) nanoplatelets. The fabricated GO-LDH hybrid coatings show uniform nacre-like layered structures that endow them good mechanic properties with Young's modulus of ≈ 18 GPa and hardness of ≈ 0.68 GPa. In addition, the GO-LDH hybrid coatings exhibit nacre-like iridescence and attractive flame retardancy as well due to their well-defined 2D microstructures. This kind of nacre-inspired GO-LDH hybrid thick coatings will be applied in various fields in future due to their high strength and multifunctionalities.
RESUMO
Click chemistry technique led to novel 1,2,3-triazole-quinine conjugates 8a-g, 10a-o, 11a-h and 13 utilizing benzotriazole-mediated synthetic approach with excellent yields. Some of the synthesized analogs (11a, 11d-h) exhibited antimalarial properties against Plasmodium falciparum strain 3D7 with potency higher than that of quinine (standard reference used) through in vitro standard procedure bio-assay. Statistically significant BMLR-QSAR model describes the bio-properties, validates the observed biological observations and identifies the most important parameters governing bio-activity.
Assuntos
Antimaláricos/síntese química , Antimaláricos/farmacologia , Quinina/química , Triazóis/química , Animais , Antimaláricos/química , Bioensaio , Espectroscopia de Ressonância Magnética Nuclear de Carbono-13 , Desenho de Fármacos , Concentração Inibidora 50 , Plasmodium falciparum/efeitos dos fármacos , Espectroscopia de Prótons por Ressonância Magnética , Relação Quantitativa Estrutura-Atividade , Espectrometria de Massas por Ionização por ElectrosprayRESUMO
E,E-2,5-bis(3,4-dimethoxystyryl)pyrazine (BDSP)has been prepared by aldol condensation between 2,5-dimethypyrazine and 3,4-dimthoxybenzaldehyde and characterized by IR, 1HNMR, 13C NMR and X-ray crystallography.The electronic absorption and emission properties of BDSP were studied in different solvents. BDSP displays a strong solvatochromic effect of the emission spectrum that is reflected by large red shifts of its fluorescence emission maximum on increasing the solvent polarity, indicating a large change in dipole moment of BDSP upon excitation due to photoinduced intramolecular charge transfer (PICT). Excited state intermolecular hydrogen bonding affects the energy of emission spectrum and fluorescence quantum yield of BDSP dye. The dye solutions (1×10(-4) M) in DMSO, DMF, CH3CN and dioxane give laser emission in green region upon excitation by a 337.1 nm nitrogen pulse (λ=337 nm). The tuning range, gain coefficient (α), emission cross section (σe) and half-life energy (E1/2) has been determined. Ground and electronic excited states geometric optimization were performed using density functional theory (DFT) and time-dependent density functional theory (TD-DFT), respectively. A DFT natural bond analysis complemented the ICT. BDSP dye displays fluorescence quenching by colloidal silver nanoparticles(AgNPs). The fluorescence data reveal that radiative and non-radiative energy transfer play a major role in the fluorescence quenching mechanism.