Patient satisfaction with laser-sintered removable partial dentures: A crossover pilot clinical trial.

STATEMENT OF PROBLEM: Clinical data regarding newly introduced laser-sintered removable partial dentures (RPDs) are needed before this technique can be recommended. Currently, only a few clinical reports have been published, with no clinical studies. PURPOSE: This clinical trial compared short-term satisfaction in patients wearing RPDs fabricated with conventional or computer-aided design and computer-aided manufacturing (CAD-CAM) laser-sintering technology. MATERIAL AND METHODS: Twelve participants with partial edentulism were enrolled in this pilot crossover double-blinded clinical trial. Participants were randomly assigned to wear cast or CAD-CAM laser-sintered RPDs for alternate periods of 30 days. The outcome of interest was patient satisfaction as measured using the McGill Denture Satisfaction Instrument. Assessments was conducted at 1, 2, and 4 weeks. The participant's preference in regard to the type of prosthesis was assessed at the final evaluation. The linear mixed effects regression models for repeated measures were used to analyze the data, using the intention-to-treat principle. To assess the robustness of potential, incomplete adherence, sensitivity analyses were conducted. RESULTS: Statistically significant differences were found in patients' satisfaction between the 2 methods of RPD fabrication. Participants were significantly more satisfied with laser-sintered prostheses than cast prostheses in regard to general satisfaction, ability to speak, ability to clean, comfort, ability to masticate, masticatory efficiency, and oral condition (P<.05). At the end of the study, 5 participants preferred the laser-sintered, 1 preferred the cast RPD, and 3 had no preference. CONCLUSIONS: The use of CAD-CAM laser-sintering technology in the fabrication of removable partial dentures may lead to better outcomes in terms of patient satisfaction in the short term. The conclusion from this pilot study requires confirmation by a larger randomized controlled trial. CLINICAL TRIAL: ClinicalTrials.gov. A study about patient satisfaction with laser-sintered removable partial dentures; NCT02769715.

Identification of oral bacteria on titanium implant surfaces by 16S rDNA sequencing.

OBJECTIVE: To characterize the profile of microbial communities colonizing titanium implants with different surface treatments after exposure to the oral environment at the genus or higher taxonomic level. MATERIAL AND METHODS: Sixteen titanium disks, machined or sandblasted large-grit and acid-etched (SLA), were mounted on removable intraoral splints worn by four patients. After 24 h of intraoral exposure, biofilm samples were collected from disks and supra/subgingival teeth areas. The 16S rDNA genes from each sample were amplified, sequenced with the Miseq Illumina instrument and analyzed. RESULTS: A total of 29 genera and seven more inclusive taxa, representing the phyla Firmicutes, Proteobacteria, Fusobacteria, Bacteroidetes, Actinobacteria and candidate division TM7 were identified in both titanium surfaces and teeth. No differences were found in relation to the operational taxonomic units (OTUs) and microbial diversity, assessed by Chao 1 and Shannon indices, when comparing SLA and machined titanium surfaces. CONCLUSIONS: Machined and SLA surfaces are colonized by similar numbers of prokaryotic OTUs after 24 h of exposure to the oral environment. Higher complexity of the titanium surface topography in the initial phase of biofilm maturation does not seem to significantly influence the colonizing microbiota.

Profile of bacteria colonizing the exposed bone of patients with anti-osteoclastic drug-related osteonecrosis of the jaws.

Microbial etiology for anti-osteoclastic drug-related osteonecrosis of the jaw (ARONJ) was suggested. This study investigates any link between bacteria colonizing ARONJ sites and other oral cavity sites. Microbiota samples of 10 ARONJ patients were collected from the exposed bone, adjacent teeth, contralateral teeth, and tongue. DNA checkerboard hybridization was used for microbiota analysis with 43 genomic DNA probes prepared from human oral bacterial (38) and candida (5) species, using Socransky's bacterial complexes as a guide. The frequency and the mean proportion of each bacterial species were used. Eikenella corrodens, Streptococcus constellatus, and Fusobacterium nucleatum were dominant in the ARONJ sites and detected in most teeth samples. Staphylococcus aureus was also dominant in the ARONJ sites and tongue. Significant correlations were found between the mean proportions of bacterial species colonizing adjacent teeth, contralateral teeth, and tongue (p < 0.001, R(2) > 0.69). No significant correlation (p > 0.05, R(2) < 0.025) was found between bacteria colonizing ARONJ sites and other evaluated sites. Within the study limitations, it was concluded that the primary sources of microorganisms colonizing ARONJ sites could be other sites such as teeth and tongue. The microbial profile of the necrotic bone is predominantly colonized with bacteria from Socransky's green and orange complexes, as well as with species associated with bone infections.

Marginal fit and microbial leakage along the implant-abutment interface of fixed partial prostheses: An in vitro analysis using Checkerboard DNA-DNA hybridization.

STATEMENT OF PROBLEM: Bidirectional leakage through the implant-abutment interface still constitutes a major concern in implant-supported restorations. PURPOSE: The purpose of this in vitro study was to evaluate the marginal fit, before and after loading simulation, of 3-unit fixed partial prostheses supported by external hexagon or Morse cone implants and to identify and quantify up to 43 microbial species penetrating through the implant-abutment interface after loading. MATERIAL AND METHODS: Forty-eight dental implants with external hexagon (EH; n=24) or Morse cone (MC; n=24) connections were investigated. Experimental specimens were made from 2 implants restored with a 3-unit fixed partial prosthesis and divided into 2 groups (n=12) according to platform connection EH or MC. Vertical misfit at the implant-abutment interface was measured before and after loading (150 Ncm during 500,000 cycles at 1.8 Hz). checkerboard DNA-DNA hybridization was used to identify and quantify up to 38 bacterial and 5 Candida species colonizing the internal parts of the implants after loading. Generalized estimating equations were used for statistical analysis (α=.05). RESULTS: The mean values (mm, ±SD) of vertical misfit for EH were 0.0131 ±0.002 before loading and 0.0138 ±0.002 after loading and for MC were 0.0132 ±0.003 before loading and 0.0137 ±0.001 after loading. Twenty-one bacterial species, including periodontal pathogens and C. albicans, were found colonizing the inner surfaces of EH implants after loading. None of the target species were detected in the internal parts of MC implants. CONCLUSIONS: EH implants showed higher microbial counts than MC implants, in which microbial colonization was not found after loading. Detected species included nonpathogens and microorganisms related to periodontal/periimplant diseases. Further studies are needed to evaluate the effect of loading simulation on the marginal misfit of 3-unit fixed partial prostheses supported by EH or MC implants, because no significant differences could be found either before or after loading.

Bacterial leakage along the implant-abutment interface: culture and DNA Checkerboard hybridization analyses.

OBJECTIVE: Bacterial species have been found harboring the internal surface of dental implants as consequence of their failed connections. The aim of the present study was to compare the detection frequency of bacterial leakage from human saliva through the implant-abutment interface, under non-loading conditions, using either DNA Checkerboard or culture method. MATERIALS AND METHODS: Thirty dental implants with hexagonal platforms were connected to pre-machined abutments according to the manufacturers' specifications. The assemblies were individually incubated in human saliva under anaerobic conditions for 7 days at 37°C. Afterward, contents from the inner parts of the implants were collected and evaluated with either DNA Checkerboard (s = 15) or culture (n = 15). Subsequently, identification and quantitation of bacterial species from saliva and implants were carried out for the group evaluated with the DNA Checkerboard method. RESULTS: Both DNA Checkerboard and culture showed positive signals of bacterial leakage in 6 of the 15 evaluated samples. Capnocytophaga gingivalis and Streptococcus mutans were the most frequently detected species harboring the internal surface of the implants followed by Veillonella parvula. CONCLUSION: Occurrence of bacterial leakage along the implant-abutment interface is comparably detected with both DNA Checkerboard hybridization and conventional culture methods.

Wear of matrix overdenture attachments after one to eight years of clinical use.

STATEMENT OF PROBLEM: Matrices of unsplinted attachment systems are generally reported to be the weak component of implant overdentures, often requiring frequent maintenance. Clinical wear results in reduced retention of the prosthesis, requiring activation or renewal of the matrix to restore the initial level of retention. PURPOSE: The purpose of this retrospective study was to measure the wear of the matrix of a ball attachment after various periods of clinical wear. MATERIAL AND METHODS: Seventy specimens of 3 groups of matrices of ball attachments that had been in use for mean periods of 12.3 months (1Y group, n=26), 39.0 months (3Y group, n=28) and 95.6 months (8Y group, n=16) were retrieved from 35 patients (2 specimens per patient) and measured on a coordinate measuring machine equipped with a touch trigger probe. Ten unused matrices were used as controls (CTRL group). The external and internal matrix diameters and deviations from circularity were measured. For the various time periods, the decreases in matrix thickness were calculated and compared with controls. Kruskal-Wallis 1-way ANOVA by ranks, followed by the Mann-Whitney post hoc tests, were conducted to test for differences in median values among groups (α =.05). RESULTS: For the internal upper diameter of the matrices tested, the Kruskal-Wallis and Mann-Whitney tests revealed significant differences for the 3 groups compared to the controls. For group 1Y, a significant difference (P<.001) of the internal upper diameter was found compared to the CTRL group. Compared to the controls, the nonparametric analyses for groups 3Y and 8Y showed significant differences for the internal upper diameter (P<.001) and deviations from circularity (P<.001). For groups 1Y, 3Y and 8Y, matrix thickness losses were 07, 47 and 70 µm, respectively. CONCLUSIONS: Within the limitations of this study, it was observed that one year of clinical wear had limited effect on the ball attachment matrices. Three to 8 years of clinical use resulted in a significant decrease of matrix thickness, especially at the tip of the retentive lamellae.

Shear bond strength between different materials bonded with two resin cements.

BACKGROUND: The aim of this study was to compare the shear bond strength between Ni-Cr alloy specimens bonded to air-abraded Ni-Cr, bur-abraded Ni-Cr, etched ceramic and etched enamel substrates using the resin cements RelyX ARC or Enforce. MATERIALS AND METHODS: Ni-Cr specimens were made and sandblasted with Al(2)O(3) airborne-particles. Disc-shaped patterns were made for each of the four experimental substrates: Ni-Cr treated with Al(2)O(3) airborne-particles, Ni-Cr treated with diamond bur abrasion, etched enamel and etched ceramic. RESULTS: Significant differences in shear bond strength were found between the different materials and luting agents evaluated. The Ni-Cr alloy cylinders bonded to Ni-Cr surfaces sandblasted with 50 µm Al(2)O(3) particles and bonded with Enforce achieved the highest bond strength when compared with other substrates (28.9 MPa, p < 0.05). Bur-abraded metal discs had lowest values, regardless the cement used (2.9 and 6.9 MPa for RelyX and Enforce, respectively). Etched enamel and etched ceramic had similar shear bond strengths within cement groups and performed better when RelyX was used. CONCLUSIONS: Bonding Ni-Cr to Ni-Cr and ceramic may result in similar and higher bond strength when compared to Ni-Cr/enamel bonding. For metal/metal bonding, higher shear bond strength was achieved with resin cement Enforce, and for metal/ceramic and metal/enamel bonding, RelyX had higher results.

Clinical wear of overdenture ball attachments after 1, 3 and 8 years.

OBJECTIVES: Implant-supported overdentures have become the treatment of choice in restoring complete edentulism, but the types of attachment to assure durable retention are a subject of debate. Ball attachments were reported as a simple treatment, but wear of components was responsible for a decrease in retention. The aim of this retrospective study was to measure the wear of the ball abutment or patrix after three different periods of clinical wear. MATERIAL AND METHODS: Sixty-nine specimens of three groups of patrix that were in use for a mean of 12.3 months (group A), 39 months (group B) and 95.6 months (group C) were retrieved from 35 patients and measured on a coordinate measuring machine equipped with a touch trigger probe. Ten unused ball abutments were added as a control (group D). The patrix diameters and any deviation from circularity in different axes were measured. RESULTS: The diameters of groups A, B and C were significantly different from that of group D (control). No statistically significant differences were found between diameter and circularity variations between groups B and C. The maximal amount of diameter reduction was limited to approximately 30 µm, and 90% of diameter loss at the equator due to wear was reached in group B. CONCLUSION: One, 3 and 8 years of clinical wear reduced significantly the diameters of the ball abutments tested, and the maximal amount of wear was reached after 3 years of clinical use.

A 3-year longitudinal prospective study assessing microbial profile and clinical outcomes of single-unit cement-retained implant restorations: Zirconia versus titanium abutments.

PURPOSE: The aim of this study was to assess the microbiological and clinical outcomes of implant-supported restorations on zirconia or titanium abutments after 3 years in function. MATERIALS AND METHODS: Twenty two-part dental implants were placed in 20 healthy individuals in need of single-tooth replacement. Ceramic-based reconstructions were cemented in either zirconia or titanium abutments. Clinical, radiographic, and microbiological outcomes were examined at implant loading and then yearly up to 3 years post-loading. RESULTS: Cumulative survival/success implant rates were 95% after 3 years. Mean total marginal bone loss was 0.76 ± 0.21 mm for zirconia and 0.99 ± 0.41 mm for titanium, with no significant differences (P > .05). Overall, titanium and zirconia abutments presented similar values of probing depth, gingival recession, and bleeding on probing over time (P < .05). Microbial profile of implants restored with titanium or zirconia is quite similar to that found in the remaining teeth. CONCLUSIONS: Zirconia and titanium presented different microbial profile and genome counts. Clinical findings for both zirconia and titanium abutments were similar and consistent with a healthy condition, reflecting a high survival rate and low bone loss. Microbiota did not impact the clinical outcomes after 3 years of function.

Influence of repeated screw tightening on bacterial leakage along the implant-abutment interface.

OBJECTIVES: Bacterial penetration along the implant-abutment interface as a consequence of abutment screw loosening has been reported in a number of recent studies. The aim of this in vitro study was to investigate the influence of repeated tightening of the abutment screw on leakage of Streptococcus mutans along the interface between implants and pre-machined abutments. MATERIALS AND METHODS: Twenty pre-machined abutments with a plastic sleeve were used. The abutment screws were tightened to 32 N cm in group 1 (n=10 - control) and to 32 N cm, loosened and re-tightened with the same torque twice in group 2 (n=10). The assemblies were completely immersed in 5 ml of Tryptic Soy Broth medium inoculated with S. mutans and incubated for 14 days. After this period, contamination of the implant internal threaded chamber was evaluated using the DNA Checkerboard method. RESULTS: Microorganisms were found on the internal surfaces of both groups evaluated. However, bacterial counts in group 2 were significantly higher than that in the control group (P<0.05). CONCLUSION: These results suggest that bacterial leakage between implants and abutments occurs even under unloaded conditions and at a higher intensity when the abutment screw is tightened and loosened repeatedly.

Effect of recombinant human bone morphogenetic protein-2 on bone formation in the acute distraction osteogenesis of rat mandibles.

BACKGROUND: Distraction osteogenesis (DO) is a method of producing new bone directly from the osteotomy site by gradual traction of the divided bone fragments. AIM: The purpose of the present study was to evaluate histomorphometrically whether acute DO would constitute a viable alternative to the conventional continuous distraction treatment and also to verify the capacity of a recombinant human BMP (rhBMP-2) associated with monoolein gel to stimulate bone formation in the acute distraction process. MATERIALS AND METHODS: Forty-eight Wistar rats were assigned to three groups: Group 1, treated at a conventional continuous distraction rate (0.5 mm/day), Group 2, treated with acute distraction of 2.5 mm at the time of the surgical procedure, and Group 3, subjected to acute distraction associated with rhBMP-2. The animals from each experimental group were killed at the end of the second or fourth post-operative weeks and the volume fraction of newly formed bone trabeculae was estimated in histological images by a differential point-counting method. RESULTS: The results showed that after 2 and 4 weeks, bone volumes in the rhBMP-2 group were significantly higher than in the other groups (P<0.05), but no significant difference was observed in the volume fraction of newly formed bone between the continuous and acute DO groups. CONCLUSION: In conclusion, the study indicates that rhBMP-2 can enhance the bone formation at acute DO, which may potentially reduce the treatment period and complications related to the distraction procedure.

Bacterial culture and DNA Checkerboard for the detection of internal contamination in dental implants.

PURPOSE: The aim of this in vitro study was to evaluate the bacterial leakage along the implant-abutment interface by the conventional bacterial culture and DNA Checkerboard hybridization method. MATERIALS AND METHODS: Twenty Branemark-compatible implants with a 3.75-mm diameter and external hexagonal platform were randomly placed in two groups of ten implant-abutment assemblies each. One group was used to analyze bacterial counts by DNA Checkerboard hybridization and the other by a conventional bacterial culture. Suspensions of Fusobacterium nucleatum (3 microl) were injected into the grooved internal cylinders of each implant assembly, and the abutment was connected by a 32 Ncm torque. The combined implant-abutments were individually placed in tubes containing the CaSaB culture medium and incubated in a bacteriological constant temperature oven for 14 days. The samples were observed daily as to the presence of turbidity, and after the designated time the microorganisms were collected from the implant interiors and analyzed by the two methods. RESULTS: After 14 days, six implant-abutment assemblies showed turbidity. Both methods indicated reduced microorganism counts in samples from the interior of the implant-abutment assemblies after incubation in the culture medium; however, the number of counts of F. nucleatum was higher by the DNA Checkerboard method when compared to the group analyzed by conventional bacterial cultures (p < 0.05). CONCLUSION: The DNA Checkerboard method was shown to be more sensitive than conventional cultures in the detection of microorganisms.

Patient satisfaction versus retention of implant overdentures with two attachment systems: A randomized trial.

BACKGROUND: Clinical success with mandibular implant overdentures is highly dependent on a reliable attachment system connecting prosthesis and implants. PURPOSE: To compare the levels of retention and patient-based outcomes on implant overdentures retained/supported by cylindrical (LA) and ball (RA) attachment systems overtime and investigate their relationship. MATERIALS AND METHODS: Attachment retention (Newtons), and patient satisfaction with the treatment, prosthesis stability, and ability to chew (VAS, 100 mm) were assessed in a crossover trial for both attachment systems at baseline, 1 week, 3, 6, and 12 months and compared to preintervention values. Patients' preference was also recorded. RESULTS: Mean retention of worn attachments and patient satisfaction with denture retention assessed in the preintervention phase were 3.2 N (SD 4.9) and 23.5 mm (IQR 6.5-65.5), respectively. Overall mean retention along the study was higher for RA than LA (difference of 5.0 N, 95%CI: 2.5-7.6; P = 0.0005), declining significantly overtime (P < 0.0001), more steeply for the cylindrical attachment. Differences in VAS ratings between attachments were nonsignificant in the crossover phase (P > 0.05), but general satisfaction, satisfaction with retention, and comfort were significantly higher when compared with preintervention scores (P < 0.05). Ratings of retention decreased significantly overtime for both systems and earlier for LA than RA. Satisfaction was lower when retention was either too low or too high, although there was large variation in this association. At the end of the study, all participants chose to remain with the attachment system that they had received last. CONCLUSIONS: Attachment selection should be based on patients' individual characteristics and expectations as satisfaction with the attachment retention and denture stability vary largely among patients.

Bone repair in rat mandible by rhBMP-2 associated with two carriers.

This study evaluated the quantity and quality of newly formed bone, stimulated by rhBMP-2 in combination with monoolein or chitosan gel as carriers, in critical bone defects created in 36 Wistar rat mandibles. Two weeks after surgery, the animals were anesthetized with 37.5% urethane submitted to perfusion and the hemi-mandibles removed for histological and histomorphometrical analysis. The results showed that there was a statistical difference between groups of animals receiving or not rhBMP-2 (p<0.05). Newly formed bone was more intense in the occlusal region, followed by the basal and middle regions, respectively. Both carriers, monoolein and chitosan gels were adequate for defect filling and control of protein release.

Oral Biofilm Formation on Different Materials for Dental Implants.

Dental implants and their prosthetic components are prone to bacterial colonization and biofilm formation. The use of materials that provides low microbial adhesion may reduce the prevalence and progression of peri-implant diseases. In view of the oral environment complexity and oral biofilm heterogeneity, microscopy techniques are needed that can enable a biofilm analysis of the surfaces of teeth and dental materials. This article describes a series of protocols implemented for comparing oral biofilm formation on titanium and ceramic materials for prosthetic abutments, as well as the methods involved in oral biofilms analyses at the morphological and cellular levels. The in situ model to evaluate oral biofilm formation on titanium and zirconia materials for dental prosthesis abutments as described in this study provides a satisfactory preservation of the 48 h biofilm, thereby demonstrating methodological adequacy. Multiphoton microscopy allows the analysis of an area representative of the biofilm formed on the test materials. In addition, the use of fluorophores and the processing of the images using multiphoton microscopy allows the analysis of the bacterial viability in a very heterogeneous population of microorganisms. The preparation of biological specimens for electron microscopy promotes the structural preservation of biofilm, images with good resolution, and no artifacts.

Osseointegration of standard and mini dental implants: a histomorphometric comparison.

BACKGROUND: Mini dental implants (MDIs) are becoming increasingly popular for rehabilitation of edentulous patients because of their several advantages. However, there is a lack of evidence on the osseointegration potential of the MDIs. The objective of the study was to histomorphometrically evaluate and compare bone apposition on the surface of MDIs and standard implants in a rabbit model. METHODS: Nine New Zealand white rabbits were used for the study to meet statistical criteria for adequate power. Total 18 3M™ESPE™ MDIs and 18 standard implants (Ankylos® Friadent, Dentsply) were inserted randomly into the tibia of rabbits (four implants per rabbit); animals were sacrificed after a 6-week healing period. The specimens were retrieved en bloc and preserved in 10% formaldehyde solution. Specimens were prepared for embedding in a light cure acrylic resin (Technovit 9100). The most central sagittal histological sections (30-40 µm thick) were obtained using a Leica SP 1600 saw microtome. After staining, the Leica DM2000 microscope was used, the images were captured using Olympus DP72 camera and associated software. Bone implant contact (BIC) was measured using Infinity Analyze software. RESULTS: All implants were osseointegrated. Histologic measures show mineralized bone matrix in intimate contact with the implant surface in both groups. The median BIC was 57.5% (IQR 9.0) in the MDI group and 55.0% (IQR 4.5) in the control group (P > 0.05, Mann-Whitney test). There were no statistical differences in osseointegration at 6 weeks between MDIs and standard implants in rabbit tibias. CONCLUSIONS: Based on these results, it is concluded that osseointegration of MDIs is similar to that of standard implants.

Customized SmartPeg for measurement of resonance frequency of mini dental implants.

BACKGROUND: One-piece narrow diameter implants (NDIs) have been recommended as "Single-tooth replacements in the anterior zones, single posterior, multiple-unit fixed dental prosthesis (FDP), edentulous jaws to be rehabilitated with FDP, and edentulous jaws rehabilitation with overdentures in situations with reduced mesiodistal space or reduced ridge width." (ITI consensus 2013). Since NDIs can be immediately loaded, it is important to be able to carry out stability testing. We developed and validated a customized SmartPeg for this type of implant to measure the Implant Stability Quotient (ISQ). The ISQ of mini dental implants (MDIs) was measured and compared with the stability of standard and in a rabbit model. OBJECTIVE: The aim of the study is to test the feasibility of a customized SmartPeg for resonance frequency measurement of single-piece mini dental implants and to compare primary stability of a standard and the mini dental implant (3M™ESPE™ MDI) in a rabbit model after 6 weeks of healing. METHODS: Eight New Zealand white rabbits were used for the study. The protocol was approved by the McGill University Animal Ethics Review Board. Sixteen 3M™ESPE™ MDI and equal number of standard implants (Ankylos® Friadent, Dentsply) were inserted into the tibia/femur of the rabbits and compared. Each rabbit randomly received two 3M™ESPE™ MDI and two Ankylos® implants in each leg. ISQ values were measured with the help of an Osstell ISQ device using custom-made SmartPegs for the MDIs and implant-specific SmartPegs™ (Osstell) for the Ankylos®. Measurements were obtained both immediately following implant placement surgery and after a 6-week healing period. Each reading was taken thrice and their average compared using Wilcoxon matched pairs signed-rank tests. RESULTS: The median ISQ and interquartile range (IQR) values were 53.3 (8.3) at insertion and 60.5 (5.5) at 6 weeks for the 3M™ESPE™MDI and, respectively, 58.5 (4.75) and 65.5 (9.3) for the Ankylos® implant. These values also indicate that both types of implants achieved primary and secondary stability, and this is supported by histological data. ISQ values of both 3M™ESPE™ MDI and Ankylos® increased significantly from the time of insertion to 6 weeks post-insertion (p < 0.05). CONCLUSIONS: The new custom-made SmartPeg is suitable for measuring the Implant Stability Quotient of 3M™ESPE™MDIs. The primary stability of 3M™ESPE™MDIs is similar to the primary stability attained by standard implants in the rabbit tibia.

A Qualitative Study on Patients' Perceptions of Two Types of Attachments for Implant Overdentures.

The aim of this qualitative study was to gain a deeper understanding of patient perceptions of wearing implant-retained overdentures with ball-shaped or cylindrical attachment systems. Twenty-two wearers of implant-supported overdentures participated in this qualitative study based on a randomized crossover clinical trial that aimed to compare a cylindrical attachment and a ball attachment. In phase I of the study, group A experienced ball attachments (n = 11) and group B Locator attachments (n = 11) for 1 year. Afterward, in phase II, the attachments were changed; group A received Locator attachments and group B received ball attachments. One week after the attachment's replacement, semistructured individual interviews were conducted. All interviews were audiotaped and transcribed. The analysis was guided by thematic content analysis. Most of the patients from both groups preferred the attachment they received in phase II, regardless the type. A major theme raised by the participants to justify their preference between the attachment types was prosthesis retention/stability, sometimes considered as a positive and other times as a negative factor. Other themes were also explored: oral function, pain, hygiene, previous experiences, confidence on the dentist's work, and esthetic. Aspects related to the retention/stability of the overdentures are the main concerns associated with the perceptions of most patients treated with implant overdentures regardless of the type of attachment. Adequate retention level should be identified and adjusted on an individual basis and maintained overtime as possible. Therefore, follow-up appointments should be planned for readjustment of the attachment's retention. Overretention should be avoided.

Electrochemical Treatment of Contaminated Titanium Surfaces in Vitro: An Approach for Implant Surface Decontamination.

Bacterial contamination on titanium implants can cause inflammation and eventually implant failure. Currently used methods for decontamination of implants have demonstrated limited success. Metal surfaces can be disinfected electrochemically. However, the effect of electrochemical treatments on biofilm-contaminated titanium is largely unknown. We hypothesized that electrochemical treatments are able to safely remove organic contamination and bacteria from titanium implants without altering their surfaces. This study was designed to assess the electrochemical properties of bacteria-contaminated surfaces in order to develop new treatments to clean titanium. Surface morphology, composition, bacterial load, and electrochemical properties of polished titanium discs were analyzed before and after biofilm contamination and subsequent decontamination with various electrochemical methods. The effect of the combination of the electrochemical with titanium brush cleaning was also evaluated. Results were then analyzed and compared to baseline readings (prior to contamination) using repeated measures ANOVA. Biofilm contamination increased the levels of carbon, nitrogen, and live bacteria on titanium surfaces while reducing their open circuit potential and corrosion resistance. Optimized electrochemical treatments with alternating current (-2.3 mA, + 22.5 µA) and voltages (1.8 V), were bactericidal and able to completely decontaminate saliva-contaminated titanium surfaces within 5 min while preserving surface integrity and histological quality of mammalian tissues. Furthermore, with the aid of mechanical brushing, the optimized electrochemical treatment was able to achieve complete decontamination of biofilm-contaminated Ti surfaces. The electrochemical treatment seems to be promising and well worth investigating for the clinical management of peri-implant infections.