Inflammatory and vascular biomarkers in post-COVID-19 syndrome: A systematic review and meta-analysis of over 20 biomarkers.

Severe acute respiratory syndrome coronavirus 2 may inflict a post-viral condition known as post-COVID-19 syndrome (PCS) or long-COVID. Studies measuring levels of inflammatory and vascular biomarkers in blood, serum, or plasma of COVID-19 survivors with PCS versus non-PCS controls have produced mixed findings. Our review sought to meta-analyse those studies. A systematic literature search was performed across five databases until 25 June 2022, with an updated search on 1 November 2022. Data analyses were performed with Review Manager and R Studio statistical software. Twenty-four biomarkers from 23 studies were meta-analysed. Higher levels of C-reactive protein (Standardized mean difference (SMD) = 0.20; 95% CI: 0.02-0.39), D-dimer (SMD = 0.27; 95% CI: 0.09-0.46), lactate dehydrogenase (SMD = 0.30; 95% CI: 0.05-0.54), and leukocytes (SMD = 0.34; 95% CI: 0.02-0.66) were found in COVID-19 survivors with PCS than in those without PCS. After sensitivity analyses, lymphocytes (SMD = 0.30; 95% CI: 0.12-0.48) and interleukin-6 (SMD = 0.30; 95% CI: 0.12-0.49) were also significantly higher in PCS than non-PCS cases. No significant differences were noted in the remaining biomarkers investigated (e.g., ferritin, platelets, troponin, and fibrinogen). Subgroup analyses suggested the biomarker changes were mainly driven by PCS cases diagnosed via manifestation of organ abnormalities rather than symptomatic persistence, as well as PCS cases with duration of <6 than ≥6 months. In conclusion, our review pinpointed certain inflammatory and vascular biomarkers associated with PCS, which may shed light on potential new approaches to understanding, diagnosing, and treating PCS.

Repositioning of anti-infective compounds against monkeypox virus core cysteine proteinase: a molecular dynamics study.

Monkeypox virus (MPXV) core cysteine proteinase (CCP) is one of the major drug targets used to examine the inhibitory action of chemical moieties. In this study, an in silico technique was applied to screen 1395 anti-infective compounds to find out the potential molecules against the MPXV-CCP. The top five hits were selected after screening and processed for exhaustive docking based on the docked score of ≤ -9.5 kcal/mol. Later, the top three hits based on the exhaustive-docking score and interaction profile were selected to perform MD simulations. The overall RMSD suggested that two compounds, SC75741 and ammonium glycyrrhizinate, showed a highly stable complex with a standard deviation of 0.18 and 0.23 nm, respectively. Later, the MM/GBSA binding free energies of complexes showed significant binding strength with ΔGTOTAL from -21.59 to -15 kcal/mol. This report reported the potential inhibitory activity of SC75741 and ammonium glycyrrhizinate against MPXV-CCP by competitively inhibiting the binding of the native substrate.

Exploring the impact of the extent of the partially edentulous area on the accuracy of two intraoral scanners.

STATEMENT OF PROBLEM: The accuracy of intraoral scans, particularly in edentulous areas, remains a concern despite the increasing use of digital technology, especially intraoral scanners. PURPOSE: The purpose of this in vitro study was to assess the impact of the extent of an edentulous area on the accuracy (trueness and precision) of intraoral scans from 2 intraoral scanners. MATERIAL AND METHODS: A KaVo dentoform with epoxy resin teeth was used to generate 9 groups with different numbers of teeth removed. A laboratory scanner served as the reference dataset, and 2 intraoral scanners (TRIOS 3 and Primescan AC) were evaluated. A single operator performed all scans following standardized protocols and calibration. Trueness and precision were assessed by using root mean square (RMS) values. Analysis of variance was used to compare trueness and precision values obtained from the 2 scanners and different partially edentulous conditions (α=.05). RESULTS: A significant difference was found in the trueness of intraoral scans of the 2 scanners and under different partially edentulous extensions. Primescan AC exhibited significantly lower trueness than TRIOS 3 (P<.001). For the individual edentulous conditions, Primescan had a significantly higher RMS mean than TRIOS 3 for G0, G3, G4, G6, G7, and G8 (P<.001) and a significantly lower RMS mean than TRIOS 3 for G1 and G4 (P<.001), while no significant difference in RMS mean was found between the 2 scanners for G2 (P=.999). For precision, no significant difference was found between the 2 scanners or different edentulous conditions [(F 8, 90)=1.82, P=.085]. CONCLUSIONS: The accuracy of intraoral scans was influenced by the length of edentulous areas and the scanner used. Primescan AC demonstrated lower trueness than TRIOS 3 for most partially edentulous conditions, while the scanners were similar in precision. These findings highlight the need for careful scanner selection in specific clinical situations, as scanning accuracy may vary depending on the scanner and edentulous condition.

Color stability of CAD-CAM hybrid ceramic materials following immersion in artificial saliva and wine.

PURPOSE: To examine the color stability of 3D-printed and milled, interim, and definitive, restorative materials after immersion in artificial saliva and wine for 1, 3, and 6 months. MATERIAL AND METHODS: The study used a 2 × 5 factorial design with 10 subgroups, including 2 immersion liquids (artificial saliva and wine) and 5 manufacturing technology and restorative material combinations (n = 10). Color measurements were taken using a contact-type digital spectrophotometer (CM-2600d Spectrophotometer; Konica Minolta Healthcare Americas Inc) before immersion and at 1 month (T1), 3 months (T3), and 6 months (T6) after immersion. The CIE2000 system was used to calculate quantitative measurements of color differences in ΔE00, and comparisons were made to the acceptability threshold (AT) and perceptibility threshold (PT). Repeated measures of ANOVA (α = 0.05) were used to compare differences in color changes between manufacturing technology/restorative material-immersion liquid combinations at T1, T3, and T6. RESULTS: To compare the effect of immersion liquid and time on the manufacturing technology/restorative material groups, the ΔE00 values were compared to the PT of 0.8 and the AT of 1.8. Wine caused significant color changes in ΔE00 values beyond the PT and AT values in all groups at all time intervals, except for the AT value of milled definitive crowns (hybrid nano-ceramic material). Wine immersion caused significant ΔE00 for all manufacturing technology/restorative material groups at all time intervals (1 month, 3 months, and 6 months) when compared to artificial saliva immersion (all p < 0.001). CONCLUSION: Upon exposure to artificial saliva, 80%-100% of samples from all groups remained within the acceptable and perceptible color change thresholds. The wine had significant chromogenic effects on all tested restorative materials, however, the milled definitive crowns (hybrid nano-ceramic material) showed the greatest color stability. For patients with heavy wine consumption, 3D-printed definitive crowns (hybrid ceramic-filled material) may show discoloration exceeding acceptable and perceptible color change limits.

Color stability of precolored and extrinsically colored monolithic multilayered polychromatic zirconia: Effects of surface finishing and aging.

PURPOSE: To explore the impact of zirconia types, coloring methods, and surface finishing on the color stability of monolithic multilayered polychromatic zirconia after artificial aging, including thermocycling and simulated toothbrushing. MATERIALS AND METHODS: Eighty square-shaped zirconia samples were divided into 2 types (M3Y-TZP and M6Y-PSZ), further categorized based on coloring methods (precolored and extrinsically colored) and surface finishing techniques (mechanical polishing or glazing). The color stability was assessed using the CIEDE2000 formula. Artificial aging was simulated via thermocycling and toothbrushing. All samples were analyzed with a spectrophotometer to determine the post-aging color changes (ΔE00). The ΔE00 were interpreted and classified using the 50:50% perceptibility threshold (PT) and the 50:50% acceptability threshold (AT). Comparisons between groups for ΔE00 differences were performed using three-way ANOVA, with pairwise comparisons facilitated by Fisher's protected least significant difference test, α = 0.05. RESULTS: The study results indicated significant impacts of zirconia type, coloring method, and surface finishing on color stability. The M6Y groups experienced significantly greater color changes (6.61 ± 1.63) compared to the M3Y groups (3.40 ± 2.24), p < 0.0001. For both types of zirconia, extrinsically colored samples exhibited significantly higher ΔE00 when mechanically polished (p = 0.004). However, surface finishing had no significant effect on ΔE00 in precolored samples of either zirconia material (p = 1.000). The evaluation and categorization of ΔE00 variations indicated that nearly all color changes in the M6Y groups, regardless of being precolored, extrinsically colored, polished, or glazed, were deemed extremely unacceptable (Grade 1). In contrast, the M3Y groups showed more acceptable results, with the majority of color changes classified as moderately unacceptable (Grade 3). CONCLUSIONS: The color stability of multilayered polychromatic zirconia is influenced by the type of material, extrinsic coloring, and the chosen surface treatment post-artificial aging. The translucent 6Y-PSZ exhibited lower color stability, especially with only mechanical polishing. For the fabrication of M3Y-TZP and 6Y-PSZ monolithic multilayered polychromatic zirconia restorations, extrinsic coloring should be paired with glazing to maintain color stability. Conversely, in the absence of extrinsic coloring, both glazing and mechanical polishing are effective in preserving color stability.

Growth in chikungunya virus-related research in ASEAN and South Asian countries from 1967 to 2022 following disease emergence: a bibliometric and graphical analysis.

BACKGROUND: ASEAN (Association of Southeast Asian Nations) is composed of ten Southeast Asian countries bound by socio-cultural ties that promote regional peace and stability. South Asia, located in the southern subregion of Asia, includes nine countries sharing similarities in geographical and ethno-cultural factors. Chikungunya is one of the most significant problems in Southeast and South Asian countries. Much of the current chikungunya epidemic in Southeast Asia is caused by the emergence of a virus strain that originated in Africa and spread to Southeast Asia. Meanwhile, in South Asia, three confirmed lineages are in circulation. Given the positive correlation between research activity and the improvement of the clinical framework of biomedical research, this article aimed to examine the growth of chikungunya virus-related research in ASEAN and South Asian countries. METHODS: The Scopus database was used for this bibliometric analysis. The retrieved publications were subjected to a number of analyses, including those for the most prolific countries, journals, authors, institutions, and articles. Co-occurrence mapping of terms and keywords was used to determine the current state, emerging topics, and future prospects of chikungunya virus-related research. Bibliometrix and VOSviewer were used to analyze the data and visualize the collaboration network mapping. RESULTS: The Scopus search engine identified 1280 chikungunya-related documents published by ASEAN and South Asian countries between 1967 and 2022. According to our findings, India was the most productive country in South Asia, and Thailand was the most productive country in Southeast Asia. In the early stages of the study, researchers investigated the vectors and outbreaks of the chikungunya virus. In recent years, the development of antivirus agents has emerged as a prominent topic. CONCLUSIONS: Our study is the first to present the growth of chikungunya virus-related research in ASEAN and South Asian countries from 1967 to 2022. In this study, the evaluation of the comprehensive profile of research on chikungunya can serve as a guide for future studies. In addition, a bibliometric analysis may serve as a resource for healthcare policymakers.

Color reproduction trueness of 3D-printed full-color dental casts with scans derived from an intraoral scanner.

PURPOSE: To investigate the effects of shade tab color variations (tooth-colored vs. gingiva-colored) and surface treatment (application of mineral oil) on the trueness of color reproduction from dental shade tabs to 3D-printed full-color dental casts, using digital scans obtained from an intraoral scanner. MATERIALS AND METHODS: Pristine tooth-colored (with 16 shade tabs) and gingiva-colored (with five shade tabs) shade guides were digitally scanned using an intraoral scanner, and subsequently, 3D-printed replicas were created using a full-color material jetting 3D printer. Three color measurements using a contact type digital spectrophotometer were recorded, including actual shade tabs (R0), dried 3D-printed study samples (RP1 ), and study samples with mineral oil application (RP2 ), in this study to calculate color differences between the actual shade tabs and 3D-printed ones. The CIEDE2000 formula was used to calculate the color differences (color reproduction trueness) between reference shade tabs and 3D-printed full-color study samples-without and with mineral oil, ∆E00 (RP1 ), and ∆E00 (RP2 ). ∆E00 (RP1 ) and ∆E00 (RP2 ) were compared with a 50:50% accessibility threshold (AT) and a 50:50% perceptibility threshold (PT). A grading system, based on the relative ranges of AT and PT, was employed. The percentage of samples falling into each color-matching category was then recorded. The data collected were subjected to statistical analysis, utilizing a mixed model ANOVA to evaluate the effects of shade tab color and mineral oil application on color differences, α = 0.05. RESULTS: The application of mineral oil significantly affected the ∆E00 [F(1, 378) = 19.1, p = < 0.0001]. However, this effect was only significant for the gingiva-colored study samples; the mineral oil application significantly decreased color difference, showing ∆E00 (RP1 ) of 8.71 ± 3.78 and ∆E00 (RP2 ) of 6.55 ± 2.14 (p < 0.0001). For the tooth-colored groups, the mineral oil application did not yield any color difference, showing ∆E00 (RP1 ) of 7.05 ± 2.35 and ∆E00 (RP2 ) of 6.94 ± 2.35 (p = 0.497). In the absence of mineral oil, gingiva-colored samples revealed a significantly larger ∆E00 (RP1 ) of 8.71 ± 3.78 compared to tooth-colored samples at 7.05 ± 2.35 (p = 0.017). Conversely, mineral oil application rendered comparable ∆E00 (RP2 ) values between gingiva-colored (6.55 ± 2.14) and tooth-colored (6.94 ± 2.35) samples (p = 0.558). All 3D-printed full-color samples showed Grade 1 (extremely unacceptable mismatch) and Grade 2 (clearly unacceptable mismatch), regardless of the shades or the presence of mineral oil. CONCLUSIONS: Utilizing an intraoral scanner to gather digital color data, along with an MJ 3D printer, offers the potential for producing 3D-printed full-color dental casts for prosthesis characterization in the dental laboratory. While mineral oil improves the color reproduction trueness of gingiva-colored objects, all 3D-printed full-color samples exhibited unacceptable mismatches when compared to their target objects. This underscores the need for future improvement in the digital color data acquisition process and color optimization protocols in 3D printing processes.

Performance of the caries diagnosis feature of intraoral scanners and near-infrared imaging technology-A narrative review.

PURPOSE: To describe and discuss the benefits and drawbacks of various dental caries diagnostic techniques, including the use of intraoral scanners for caries diagnosis based on near-infrared imaging (NIR) technology. MATERIAL AND METHODS: A MEDLINE search from 1980-2023 focused on dental caries diagnostic techniques, emphasizing intraoral scanners using NIR technology. Alternative caries detection methods were also evaluated for their advantages and limitations, enabling a comparison with NIR. The review included traditional caries tools, the latest detection methods, and NIR's role in intraoral scanners, drawing from case reports and both in vivo and in vitro studies. Keywords like "caries detection," "intraoral scanners," and "Near Infrared Imaging (NIRI)" guided the search. After screening titles and abstracts for relevance, full texts with valuable insights were thoroughly analyzed. The data was grouped into three: traditional diagnostics, advanced digital methods, and intraoral scanner-based detection. RESULTS: This comprehensive narrative review described and discussed the current state of dental caries diagnostic methods, given the insufficient number of clinical investigations suitable for a systematic review. Traditional caries diagnosis techniques have shown variable accuracy dependent on a dentist's experience and the potential over-removal of healthy tooth structures. Intraoral scanners have emerged as a novel caries detection method, because of their integration of NIR technology. Various studies have confirmed the efficacy of NIR in detecting interproximal caries and in the early diagnosis of non-cavitated caries. Specifically, intraoral scanners have demonstrated promising results, proving comparable to established diagnostic methods like bitewing radiography. Nevertheless, while the integration of NIR into intraoral scanners seems promising, the technology still faces challenges, notably its accuracy in detecting secondary and subgingival cavities. However, with anticipated integrations of AI, NIR in intraoral scanners could revolutionize early caries detection. CONCLUSIONS: Intraoral scanners with NIR technology offer non-destructive imaging, real-time lesion visuals, and enhanced patient communication. Although comparable to bitewing radiography in some studies, a universally accepted diagnostic tool is lacking. Future research should compare them with existing methods, focusing on clinical outcomes, cost-effectiveness, and patient acceptance.

Tensile bond strength of auto-polymerizing and heat-polymerizing denture reliners on the conventional and CAD-CAM denture base materials.

PURPOSE: The study aimed to compare the tensile bond strength (TBS) of auto-polymerizing and heat-polymerizing denture reliners on the conventional (compression-molding and injection-molding) and computer-aided design and computer-aided manufacturing (milled and 3D-printed) denture base materials. MATERIALS AND METHODS: Eighty standard dogbone-shaped specimens were fabricated from four materials: compression-molding, injection-molding, milled, and 3D-printed denture base materials. A 3-mm cutoff was removed from each specimen at the midsection, and all specimens were reattached with either auto-polymerizing (n = 10) or heat-polymerizing (n = 10) reliner. The TBS was measured on the universal testing machine. A scanning electron microscope (SEM) was used to examine the fractured surfaces at cross sections to determine the dominant failure mode in each group. Two-way ANOVA was used to examine the effects of denture base material and reliner on the TBS (α = 0.05). Weibull survival analysis was also used to determine the survival probability curves. RESULTS: Heat-polymerizing reliner led to a higher TBS than the auto-polymerizing reliner, except in the compression-molding (p = 0.573) groups. Compression-molding denture base material connected with a heat-polymerizing reliner showed the highest TBS (29.8 ± 6.9 MPa), whereas 3D-printed denture base material connected with an auto-polymerizing reliner showed the lowest TBS (7.2 ± 0.9 MPa). The survival probability based on the Weibull model demonstrated that the compression-molding denture base material connected with either auto-polymerizing or heat-polymerizing reliners had the longest survival time to failure, whereas 3D-printed denture base material relined with auto-polymerizing reline material showed the shortest survival time to failure. Under the SEM, the compression-molding groups demonstrated that the failure modes were mixed but predominantly cohesive. The injection-molding and milled groups showed predominantly adhesive failures at the denture base-reline material interfaces. The dominant mode of failure in the 3D-printed groups was cohesive failures within the bonding adhesive. CONCLUSIONS: Although the heat-polymerizing reliner led to a higher TBS than the auto-polymerizing reliner in most denture base materials, the compression-molding denture base material can achieve high TBS with both reliners. When the auto-polymerizing reliner is used with 3D-printed denture base material, clinicians should be aware of lower TBS value and possible cohesive failures, and the detachment of the reliner from the denture base.

The trueness of scans using one intraoral scanner in different partially edentulous conditions.

PURPOSE: To investigate the trueness of intraoral scanning in 8 commonly seen partially edentulous conditions. MATERIALS AND METHODS: A maxillary dentoform was modified into the 8 commonly seen partially edentulous conditions. Each modification was scanned with a laboratory desktop scanner. Each modification was then scanned 10 times (n = 10) with an intraoral scanner. All scans were exported as STL files and then imported into a surface matching software using the best-fit alignment method. The dimensional differences between the study STL files from the intraoral scanner were compared to the corresponding reference STL files. The measurements were calculated as the root mean square (RMS) and defined as the trueness of the intraoral scans. In addition to the RMS values, qualitative assessments were completed on the color maps. The color maps produced by the surface matching software were used to visualize the areas of deviation between scans from the intraoral scanner and their corresponding reference files. One-way analysis of variance (ANOVA), followed by pair-wise comparisons using Fisher's Protected Least Significant Difference were utilized to compare the differences between the groups in RMS values (α = 0.05). RESULTS: Partially edentulous condition significantly affected the trueness of the intraoral scans. Group 8 (Class IV) had significantly lower RMS (0.1878 ± 0.0455 mm) than all other groups (p < 0.001). Group 2 (Class II) and Group 7 (Class III modification I) are not significantly different from each other (Group 2: 0.5758 ± 0.0300 mm; Group 7: 0.5602 ± 0.0231 mm, p = 0.571), while they both had significantly higher RMS than all other groups (p < 0.001). The remaining groups showed the RMS values were within the range of 0.3001 ± 0.0891 mm (Group 6 - Class III with Long Edentulous Span) and 0.4541 ± 0.1039 mm (Group 1 - Class I). CONCLUSION: Different partially edentulous conditions affected the trueness of the scans generated from the selected intraoral scanner. Class IV edentulous condition had the highest intraoral scan trueness. It is unknown if RMS values are clinically significant, and the validity of using intraoral scans directly for PRDP fabrication will need further studies.

Highlights on the Development, Related Patents, and Prospects of Lenacapavir: The First-in-Class HIV-1 Capsid Inhibitor for the Treatment of Multi-Drug-Resistant HIV-1 Infection.

The multidrug-resistant (MDR) human immunodeficiency virus 1 (HIV-1) infection is an unmet medical need. HIV-1 capsid plays an important role at different stages of the HIV-1 replication cycle and is an attractive drug target for developing therapies against MDR HIV-1 infection. Lenacapavir (LEN) is the first-in-class HIV-1 capsid inhibitor approved by the USFDA, EMA, and Health Canada for treating MDR HIV-1 infection. This article highlights the development, pharmaceutical aspects, clinical studies, patent literature, and future directions on LEN-based therapies. The literature for this review was collected from PubMed, authentic websites (USFDA, EMA, Health Canada, Gilead, and NIH), and the free patent database (Espacenet, USPTO, and Patent scope). LEN has been developed by Gilead and is marketed as Sunlenca (tablet and subcutaneous injection). The long-acting and patient-compliant LEN demonstrated a low level of drug-related mutations, is active against MDR HIV-1 infection, and does not reveal cross-resistance to other anti-HIV drugs. LEN is also an excellent drug for patients having difficult or limited access to healthcare facilities. The literature has established additive/synergistic effects of combining LEN with rilpivirine, cabotegravir, islatravir, bictegravir, and tenofovir. HIV-1 infection may be accompanied by opportunistic infections such as tuberculosis (TB). The associated diseases make HIV treatment complex and warrant drug interaction studies (drug-drug, drug-food, and drug-disease interaction). Many inventions on different aspects of LEN have been claimed in patent literature. However, there is a great scope for developing more inventions related to the drug combination of LEN with anti-HIV/anti-TB drugs in a single dosage form, new formulations, and methods of treating HIV and TB co-infection. Additional research may provide more LEN-based treatments with favorable pharmacokinetic parameters for MDR HIV-1 infections and associated opportunistic infections such as TB.

A Review of the Resistance Mechanisms for ß-Lactams, Macrolides and Fluoroquinolones among Streptococcus pneumoniae.

Streptococcus pneumoniae (S. pneumoniae) is a bacterial species often associated with the occurrence of community-acquired pneumonia (CAP). CAP refers to a specific kind of pneumonia that occurs in individuals who acquire the infection outside of a healthcare setting. It represents the leading cause of both death and morbidity on a global scale. Moreover, the declaration of S. pneumoniae as one of the 12 leading pathogens was made by the World Health Organization (WHO) in 2017. Antibiotics like ß-lactams, macrolides, and fluoroquinolones are the primary classes of antimicrobial medicines used for the treatment of S. pneumoniae infections. Nevertheless, the efficacy of these antibiotics is diminishing as a result of the establishment of resistance in S. pneumoniae against these antimicrobial agents. In 2019, the WHO declared that antibiotic resistance was among the top 10 hazards to worldwide health. It is believed that penicillin-binding protein genetic alteration causes ß-lactam antibiotic resistance. Ribosomal target site alterations and active efflux pumps cause macrolide resistance. Numerous factors, including the accumulation of mutations, enhanced efflux mechanisms, and plasmid gene acquisition, cause fluoroquinolone resistance. Furthermore, despite the advancements in pneumococcal vaccinations and artificial intelligence (AI), it is not feasible for individuals to rely on them indefinitely. The ongoing development of AI for combating antimicrobial resistance necessitates more research and development efforts. A few strategies can be performed to curb this resistance issue, including providing educational initiatives and guidelines, conducting surveillance, and establishing new antibiotics targeting another part of the bacteria. Hence, understanding the resistance mechanism of S. pneumoniae may aid researchers in developing a more efficacious antibiotic in future endeavors.

Tools to Alleviate the Drug Resistance in Mycobacterium tuberculosis.

Mycobacterium tuberculosis (Mtb), an acid-fast bacillus that causes Tuberculosis (TB), is a pathogen that caused 1.5 million deaths in 2020. As per WHO estimates, another 4.1 million people are suffering from latent TB, either asymptomatic or not diagnosed, and the frequency of drug resistance is increasing due to intrinsically linked factors from both host and bacterium. For instance, poor access to TB diagnosis and reduced treatment in the era of the COVID-19 pandemic has resulted in more TB deaths and an 18% reduction in newly diagnosed cases of TB. Additionally, the detection of Mtb isolates exhibiting resistance to multiple drugs (MDR, XDR, and TDR) has complicated the scenario in the pathogen's favour. Moreover, the conventional methods to detect drug resistance may miss mutations, making it challenging to decide on the treatment regimen. However, owing to collaborative initiatives, the last two decades have witnessed several advancements in both the detection methods and drug discovery against drug-resistant isolates. The majority of them belong to nucleic acid detection techniques. In this review, we highlight and summarize the molecular mechanism underlying drug resistance in Mtb, the recent advancements in resistance detection methods, and the newer drugs used against drug-resistant TB.

CAD-CAM Hollow Obturator Prosthesis: A Technical Report.

An obturator with a hollow bulb can decrease the overall weight of the prosthesis, stress on the underlying tissues, and patient discomfort. Although many techniques and materials have been proposed in the literature for hollowing the obturator prosthesis, they are often time consuming and technique sensitive. This proposed technique used an open-source software program to hollow a digital design of a solid obturator base from a commercially available software in one single convenient step. The hollowing process allowed precise control of prosthesis thickness at the hollow space area for desirable hermetic seal and prosthesis strength.

The Trueness of Obturator Prosthesis Base Manufactured by Conventional and 3D Printing Techniques.

PURPOSE: To compare the intaglio surface trueness of obturator prosthesis bases manufactured by traditional compression molding, injection molding, and 3D printing techniques. MATERIALS AND METHODS: A complete edentulous master cast with Aramany Class I maxillary defect was selected for this in vitro study. Four study groups (n = 10/group) were included in this study, Group A: Compression Molding, Group B: Injection Molding, and Group C: Cara Print 3D DLP Printer, and Group D: Carbon 3D DLS Printer. All obturator prostheses' intaglio surfaces were scanned with a laboratory scanner (E4; 3Shape Inc, New Providence, NJ) and the dimensional differences between study samples and their corresponding casts were calculated as the root mean square (measured in mm, absolute value) using a surface matching software (Geomagic design X; 3D Systems, Rock Hill, SC). One-way Analysis of variance (ANOVA) and Fisher's least significant difference (LSD) test were used to compare groups differences in RMS (α = 0.05). RESULTS: There was a significant effect of manufacturing technique on the RMS values for the 4 conditions [F(3,36) = 5.743, p = 0.003]. Injection Molding (0.070 mm) and Compression Molding groups (0.076 mm) had a lower interquartile range, and the Cara Print 3D-Printer group (0.427 mm) and Carbon 3D-Printer (0.149 mm) groups had a higher interquartile range. The Injection Molding group showed the best and uniform surface matching with the most area in green in the color maps. The Injection Molding group (0.139 ± 0.049 mm) had significantly lower RMS than all other groups (p < 0.001 for all comparisons). Compression Molding (0.269 ± 0.057 mm), Cara Print 3D-Printer (0.409 ± 0.270 mm), and Carbon 3D-Printer (0.291 ± 0.082 mm) groups were not significantly different from each other (Compression Molding versus Carbon 3D-Printer, p = 0.59; Compression Molding versus Cara Print 3D-Printer, p = 0.25; Cara Print 3D-Printer versus Carbon 3D-Printer, p = 0.40). CONCLUSION: Obturator prosthesis bases manufactured with injection molding technique showed better intaglio surface trueness than ones made by the compression molding technique and 3D printers. Although obturator prosthesis bases manufactured from different 3D printers showed similar trueness, a DLP 3D printer produced less consistent outcome than a DLS 3D printer.

An Overview on Phenotypic and Genotypic Characterisation of Carbapenem-Resistant Enterobacterales.

Improper use of antimicrobials has resulted in the emergence of antimicrobial resistance (AMR), including multi-drug resistance (MDR) among bacteria. Recently, a sudden increase in Carbapenem-resistant Enterobacterales (CRE) has been observed. This presents a substantial challenge in the treatment of CRE-infected individuals. Bacterial plasmids include the genes for carbapenem resistance, which can also spread to other bacteria to make them resistant. The incidence of CRE is rising significantly despite the efforts of health authorities, clinicians, and scientists. Many genotypic and phenotypic techniques are available to identify CRE. However, effective identification requires the integration of two or more methods. Whole genome sequencing (WGS), an advanced molecular approach, helps identify new strains of CRE and screening of the patient population; however, WGS is challenging to apply in clinical settings due to the complexity and high expense involved with this technique. The current review highlights the molecular mechanism of development of Carbapenem resistance, the epidemiology of CRE infections, spread of CRE, treatment options, and the phenotypic/genotypic characterisation of CRE. The potential of microorganisms to acquire resistance against Carbapenems remains high, which can lead to even more susceptible drugs such as colistin and polymyxins. Hence, the current study recommends running the antibiotic stewardship programs at an institutional level to control the use of antibiotics and to reduce the spread of CRE worldwide.

3D-printed Zirconia and Lithium Disilicate in Dentistry and Their Clinical Applications.

The review focuses on the progressive role of 3D-printing in dentistry, particularly emphasizing the use of zirconia-based and lithium disilicate (LS2) -based ceramic materials. Celebrated for their biocompatibility and esthetic resemblance to natural teeth, these materials have shown promising results with high success rates. Digital light processing (DLP) and stereolithography (SLA) have been noted for producing superior 3D-printed ceramic products. Despite facing challenges such as surface defects, mechanical strength limitations, and esthetic inconsistencies, active research is dedicated to refining the quality and esthetics of 3D-printed zirconia-based and LS2-based ceramics. The review acknowledges the need to mitigate the steep costs of this manufacturing form and recognizes the current shortfall in clinician and technician awareness of these advanced techniques. Addressing these issues through focused research on improving surface quality, dimensional accuracy, and mechanical properties of 3D-printed dental prostheses is crucial, as is enhancing the dental community's understanding and acceptance of this innovative technology.

The Quality of AI-Generated Dental Caries Multiple Choice Questions: A Comparative Analysis of ChatGPT and Google Bard Language Models.

Statement of problem: AI technology presents a variety of benefits and challenges for educators. Purpose: To investigate whether ChatGPT and Google Bard (now is named Gemini) are valuable resources for generating multiple-choice questions for educators of dental caries. Material and methods: A book on dental caries was used. Sixteen paragraphs were extracted by an expert consultant based on applicability and potential for developing multiple-choice questions. ChatGPT and Bard language models were used to produce multiple-choice questions based on this input, and 64 questions were generated. Three dental specialists assessed the relevance, accuracy, and complexity of the generated questions. The questions were qualitatively evaluated using cognitive learning objectives and item writing flaws. Paired sample t-tests and two-way analysis of variance (ANOVA) were used to compare the generated multiple-choice questions and answers between ChatGPT and Bard. Results: There were no significant differences between the questions generated by ChatGPT and Bard. Moreover, the analysis of variance found no significant differences in question quality. Bard-generated questions tended to have higher cognitive levels than those of ChatGPT. Format error was predominant in ChatGPT-generated questions. Finally, Bard exhibited more absolute terms than ChatGPT. Conclusions: ChatGPT and Bard could generate questions related to dental caries, mainly at the cognitive level of knowledge and comprehension. Clinical significance: Language models are crucial for generating subject-specific questions used in quizzes, tests, and education. By using these models, educators can save time and focus on lesson preparation and student engagement instead of solely focusing on assessment creation. Additionally, language models are adept at generating numerous questions, making them particularly valuable for large-scale exams. However, educators must carefully review and adapt the questions to ensure they align with their learning goals.

Marginal Fit, Mechanical Properties, and Esthetic Outcomes of CAD/CAM Interim Fixed Dental Prostheses (FDPs): A Systematic Review.

This systematic review aimed to study the outcomes of CAD-CAM (milled and 3D-printed) interim dental prostheses when compared to conventional ones. The focused question of "In natural teeth, what are the outcomes of CAD-CAM interim FDPs compared to the conventionally-manufactured ones regarding marginal fit, mechanical properties, esthetics, and color stability" was formulated. The systematic search was conducted electronically in the PubMed/MEDLINE, CENTRAL, EMBASE, Web of Science, New York Academy of Medicine Grey Literature Report, and Google Scholar databases by using the MeSH keywords and keywords associated with the focused question and limiting articles to those published between 2000 and 2022. A manual search was conducted in selected dental journals. The results were analyzed qualitatively and are presented in table format. Of the included studies, 18 studies were in vitro and 1 was a randomized clinical trial. Of the eight studies analyzing the mechanical properties, five studies favored the milled interim restorations, one study favored both 3D-printed and milled interim restorations, and two studies reported better mechanical properties in conventional interim restorations. Among four studies evaluating the marginal discrepancies, two studies favored the marginal fit in milled interim restorations, one study reported a better marginal fit in both milled and 3D-printed interim restorations, and one study found conventional interim restorations have a better marginal fit and smaller marginal discrepancy when compared to both milled and 3D-printed restorations. Among five studies that evaluated both the mechanical properties and marginal fit, 1 study favored 3D-printed interim restorations and four studies favored milled interim restorations over the conventional ones. Two studies analyzing the esthetics outcomes demonstrated better results with milled interim restorations compared to conventional and 3D-printed interim restorations in terms of their color stabilities. The risk of bias was low for all the studies reviewed. The high level of heterogeneity within the studies excluded meta-analysis. Most of the studies favored the milled interim restorations over the 3D-printed and conventional restorations. The results suggested that milled interim restorations offer a better marginal fit, higher mechanical properties, and better esthetic outcomes in terms of color stabilities.

SARS-CoV-2 infection and multi-organ system damage: A review.

The SARS-CoV-2 infection causes COVID-19, which has affected approximately six hundred million people globally as of August 2022. Organs and cells harboring angiotensin-converting enzyme 2 (ACE2) surface receptors are the primary targets of the virus. However, once it enters the body through the respiratory system, the virus can spread hematogenously to infect other body organs. Therefore, COVID-19 affects many organs, causing severe and long-term complications, even after the disease has ended, thus worsening the quality of life. Although it is known that the respiratory system is most affected by the SARS-CoV-2 infection, many organs/systems are affected in the short and long term. Since the COVID-19 disease simultaneously affects many organs, redesigning diagnostic and therapy policies to fit the damaged organs is strongly recommended. Even though the pathophysiology of many problems the infection causes is unknown, the frequency of COVID-19 cases rises with age and the existence of preexisting symptoms. This study aims to update our knowledge of SARS-CoV-2 infection and multi-organ dysfunction interaction based on clinical and theoretical evidence. For this purpose, the study comprehensively elucidates the most recent studies on the effects of SARS-CoV-2 infection on multiple organs and systems, including respiratory, cardiovascular, gastrointestinal, renal, nervous, endocrine, reproductive, immune, and parts of the integumentary system. Understanding the range of atypical COVID-19 symptoms could improve disease surveillance, limit transmission, and avoid additional multi-organ-system problems.