Cleft Lip and Palate Midfacial Hypoplasia: Criteria to Choose the Treatment.

ABSTRACT: A series of skeletal and dentoalveolar/occlusal criteria were proposed for choosing the treatment modality for the management of midface hypoplasia in cleft lip/palate patients, focusing on functional improvement, aesthetics, and minimizing the risk of recurrence and secondary alterations. For which, 42 patients with nonsyndromic cleft lip/palate, all with previous primary lip/palate surgeries and without previous osteotomies, were analyzed. Orthognathic surgery (OS) (n = 24) and maxillary distraction osteogenesis (n = 18) with anterior segmental osteotomies (segmental distraction osteogenesis [SD]), alveolar transport disc (TD), and midface total distraction osteogenesis (TDO) by modified Le Fort III osteotomy was done.The average of maxillary advancement for OS was 5.58 ±â€Š0.83 mm, for SD 9.4 ±â€Š0.89 mm, for TD 8.00 ±â€Š1.00 mm, and for TDO was 8.13 ±â€Š1.55 mm.In the presence of infraorbital and/or zygomatic hypoplasia, TDO was performed using skeletal anchorage, with the requirement of occlusal stability in dental cast in occlusion. In short maxillary arch without dental cast feasibility in occlusion, hypodontia/agenesis or absence of premaxilla, TD and SD was performed. There was only 1 mm of recurrence in 1 patient of each group. Changes in speech were detected in 2 patients in the OS group (8.3%). Orthognathic surgery can be indicated for advancements ≤7 mm not requiring orbito-zygomatic advancement, whereas distraction osteogenesis can be indicated for advances >8 mm with or without the need for orbito-zygomatic advancement, in addition with other dentoalveolar factors and velopharyngeal function.

Mandibular Angle Contouring Using Porous Polyethylene Stock or PEEK-based Patient Specific Implants. A Critical Analysis.

ABSTRACT: Contour augmentation and mandibular angle modification surgery is becoming increasingly. The aim of this research is to compare technique and outcomes in augmentations done with standard implants or PEEK-based patient specific implants (PSI) in mandibular angle. Data from surgical planning, operative and post-operative of 6 months follow-up were revised for 21 patients who were submitted to facial surgery using a stock implant obtained from companies currently on the market or 3D implants created with CAD/CAM technology using PEEK 3D printing. Surgical time, intra-operative and post-operative complications were compared, analyzing the advantages and disadvantage of each technique. Statistical analyses using t-test and chi-squared were performed considering P value< 0.05 for statistical differences. Twelve patients were operated on with stock implants and nine patients with PSI. The surgical time was 15 minutes less for the 3D implant surgeries (P = 0.021) and intraoperatively only the stock implants needed modifications with wear and adaptation methods; post-operative infections were observed in both groups with no significant differences (P > 0.05). The 3D implants had greater levels of facial symmetry than the stock implants, although they did not present significant differences.Considering the limitations of this study, mandibular angle implants with a PEEK-based 3D CAD/CAM are efficient, stable and have a low complication rate; the CAD/CAM strategy is useful in facial surgery and can be integrated as a standard for surgical planning in facial makeover surgery.

Three-Dimensional Planning and Surgical Technique for Modified Le Fort I and Le Fort III Osteotomy in Non-Syndromic Patients.

Total midface deficiency, to include the orbits, nose, zygomas, and maxilla, can occur in both syndromic and non-syndromic individuals. The treatment with combination of Le Fort III and I osteotomy could be used and it is few reported in the literature. The aim of the study is to present how technology can make the procedure for the correction of hypoplasia of the middle third more predictable and safer. The 2 clinical cases were managed under submental intubation and using VSP that generated 3D printing of oclusal splints and cutting guides. Modified oblique Le Fort III osteotomy (MOLFIIIO) and Le Fort I osteotomy were used due to patients present large sagittal discrepancy between maxilla and mandible (18 and 17 mm). The patients presented good outcomes without complications. In this study, the authors demonstrate that non-syndromic patient could be managed safety with MOLFIII and Le Fort I osteotomies for the correction of midfacial deformities using virtual surgical planning (VSP) associated with 3D printing technique and piezoelectric surgery.

Alveolar Cleft Reconstruction Using Morphogenetic Protein (rhBMP-2): A Systematic Review and Meta-Analysis.

OBJECTIVE: This study aimed to review the existing evidence regarding reconstruction of the alveolar cleft using recombinant human bone morphogenetic protein-2 (rhBMP-2) in terms of bone volume and bone height. DESIGN: Systematic review and meta-analysis. PATIENTS­PARTICIPANTS: A systematic search was done. Randomized and nonrandomized clinical trials, where rhBMP-2 was used in the reconstruction of human alveolar cleft were included. INTERVENTIONS: Reconstruction of alveolar cleft with rhBMP-2. MAIN OUTCOME MEASURES: Average bone volume formation and average bone height formation in the alveolar cleft. Mean difference was calculated and pooled by meta-analysis. RESULTS: Of 709 identified articles, 5 studies met the inclusion criteria. The average bone volume formation was higher in the rhBMP-2 group than in the control group (61.11% vs 59.12%). The average bone height formation was higher in the control group compared to the rhBMP-2 group (75.4% vs 61.5%). The risk of bias in the selected articles was high. The meta-analysis showed that rhBMP-2 treatment may benefit bone formation compared to iliac crest graft (low certainty evidence; mean difference: -208.76; 95% confidence interval: -253.59 to -163.93; -I2 = 0%). CONCLUSIONS: The results obtained in primary articles are promising but have a high risk of bias and have low quality of evidence; therefore, it is necessary to conduct controlled clinical trials with a greater number of patients to recommend the use of rhBMP-2 in the treatment of the alveolar cleft. PROSPERO registration number: CRD42018077741.

Temporomandibular Joint Ankylosis: Algorithm of Treatment.

: Temporomandibular joint ankylosis, according to age of onset, causes severe functional and morphological disorders, as well as stunted craniofacial growth and development.The primary goal of treatment is to resolve the functional and morphological disorders. METHOD: Pre- and posttreatment clinical and cephalometric registries were conducted in 15 patients with temporomandibular joint ankylosis over a 10-year period (2002-2012). All the patients underwent complete removal of the ankylotic block, gap arthroplasty, and ipsilateral coronoidectomy. Distraction osteogenesis was performed on 12 patients. RESULTS: Fifteen patients, 8 female and 7 male, ranging from 3 to 30 years of age, were included in this study. The posttreatment follow-up period ranged from 3 to 13 years.The mean preoperative maximum mouth opening was 3 ± 1.7 mm, and the mean postoperative maximum mouth opening was 36 ± 6.5 mm. The labial inclination with respect to the true horizontal decreased considerably (6.2° ± 2.3° preoperative to 1° ± 1.6° postoperative). A correction of the mandibular deviation was measured at the symphysis with respect to the facial midline (8° ± 2° preoperative to 2° postoperative). Finally, the height ratio of both mandibular rami (the healthy side and the affected side) decreased considerably (1.27 ± 0.05 preoperative to 1.07 ± 0.06 postoperative).Reankylosis only occurred in 2 patients, who were then successfully treated by means of gap arthroplasty. CONCLUSIONS: The therapeutic algorithm proposed in the present work provides favorable functional and morphological results. Early and aggressive functional physiotherapy is essential to minimize the risk of reankylosis.

Early Treatment of Unilateral Condylar Hyperplasia in Adolescents: Preliminary Results.

Facial asymmetry associated with unilateral condylar hyperplasia (UCH) is a rare disease. The aim of this study was to evaluate the clinical conditions of progressive facial asymmetry in young subjects treated with high condylectomy. A retrospective study was performed including nine subjects diagnosed with UCH type 1B and progressive facial asymmetry around 12 years old with an upper canine progressing towards dental occlusion. After an analysis and a decision of treatment, orthodontics began one to two weeks prior to the condylectomy (with a mean vertical reduction of 4.83 ± 0.44 mm). Facial and dental asymmetry, dental occlusion, TMJ status and an open/closing mouth were analyzed before surgery and in the final stage of treatment, almost 3 years after surgery. Statistical analyses were performed using the Shapiro-Wilk test and a Student's t-test considering a p value of <0.05. Comparing T1 (before surgery) and T2 (once orthodontic treatment was finalized), the operated condyle showed a similar height to that observed in stage 1 with a 0.12 mm difference in height (p = 0.8), whereas the non-operated condyle showed greater height increase with an average of 3.88 mm of vertical growth (p = 0.0001). This indicated that the non-operated condyle remained steady and that the operative condyle did not register significant growth. In terms of facial asymmetry in the preoperative stage, a chin deviation of 7.55 mm (±2.57 mm) was observed; in the final stage, there was a significant reduction in the chin deviation with an average of 1.55 mm (±1.26 mm) (p = 0.0001). Given the small number of patients in the sample, we can conclude that high condylectomy (approx. 5 mm), if performed early, especially in the mixed-dentition stage before full canine eruption, is beneficial for the early resolution of asymmetry and thus the avoidance of future orthognathic surgery. However, further follow-up until the end of facial growth is required.

Comparison of rhBMP-2 in Combination with Different Biomaterials for Regeneration in Rat Calvaria Critical-Size Defects.

Regeneration of critical bone defects requires the use of biomaterials. The incorporation of osteoinductive agents, such as bone morphogenetic proteins (BMPs), improves bone formation. This study aimed to compare the efficacy of rhBMP-2 in combination with different materials for bone regeneration in critical-sized rat calvarial defects. This was an experimental animal study using 30 rats. In each rat, two 5-mm critical-size defects were made in the calvaria (60 bone defects in total) using a trephine. All rats were randomized to one of the six groups: control (C), autograft + rhBMP-2 (A), absorbable collagen sponge + rhBMP-2 (ACS), ß-tricalcium phosphate + rhBMP-2 (B-TCP), bovine xenograft + rhBMP-2 (B), and hydroxyapatite + rhBMP-2 (HA). The outcome was assessed after 4 and 8 weeks using histological description and the histological bone healing scale. Statistical analysis was performed using the Kruskal-Wallis and Mann-Whitney U tests, with a p-value set at 0.05. The average bone healing scores per group were as follows: C group, 12.5; A group, 26.5; ACS group, 18.8; B-TCP group, 26.2; HA group, 20.9; and B group, 20.9. The C group showed a significant difference between weeks 4 and 8 (p = 0.032). Among the 4-week groups, the C group showed a significant difference compared to A (p = 0.001), ACS (p = 0.017), and B-TCP (p = 0.005) groups. The 8-week experimental group did not show any significant differences between the groups. The 5-mm critical size defect in rat calvaria requires the use of bone biomaterials to heal at 4 and 8 weeks. rhBMP-2, as applied in this study, showed no difference in new bone formation when combined with bovine, B-TCP, or HA biomaterials.

Histological Analysis of Bone Repair in Mandibular Body Osteotomy Using Internal Fixation System in Three Different Gaps without Bone Graft in an Animal Model.

The aim was to analyze histologically the bone repair in a mandibular osteotomy model with different gaps between the segments. Nine male rabbits who underwent osteotomies on the mandibular body were fixed with a 1.5 system plate and no bone graft; group 1 (2 mm gap between segments), group 2 (5 mm gap between segments), and group 3 (8 mm gap between segments) were included. After 8 weeks they were euthanized and the sample was processed for histological analysis. Group 1 showed advanced bone repair with cartilaginous tissue and cancellous bone, showing osteoblasts and type III collagenous fibers. In group 2, a more delayed ossification was observed, with an extensive area of peripheral ossifying cartilage and chondrocytes in greater number at the center of the defect; group 3 showed no evidence of ossification with fibrous tissue, a very low level of chondrocytes, and some bone sequestrate. We can conclude that, in this animal model, 2 or 5 mm gap in the osteotomy could be repaired as bone when fixation is used. The size of the gap is an important factor for the use of bone grafts considering endochondral ossification. This model can be used for graft analysis and related technologies.

Anatomical Conditions in Simultaneous Orthognathic Surgery and Structural Rhinoplasty. A Clinical Series / Condiciones Anatómicas en Cirugía Ortognática y Rinoplastia Estructural Simultanea. Una Seria Clínica

SUMMARY: Orthognathic surgery and rhinoplasty show synergy in terms of function and aesthetic results. The aim of this research is to analyze variables related to simultaneous orthognathic surgery and rhinoplasty and to discuss the surgical sequence. Male and female subjects between 18 and 45 years old were included in this research. Diagnosis related to nasal morphology (nasal tip bifid, rotate, square and others as well as the alae morphology and columella), facial deformity (sagittal and vertical deformity), type of surgery (rhinoplasty techniques and orthognathic techniques) and complications were included. The minimum follow-up was 12 months; Chi- Square and t test were used to define correlations, considering a value of p<0.05 for statistical significance. Class III facial deformity was observed in 40 % of subjects and class II facial deformity was present in 43 %. For the nasal deformities, the tip and nasal bridge were most prevalent; primary nasal deformity was observed in the 83 % of subjects and was significant more than secondary nasal deformity (p=0.042). Bimaxillary surgery was performed in 31 cases (88 %). In 10 cases a change of the original plan for rhinoplasty due to previous maxillary surgery was realized, mainly in class III facial deformity, with no statistical differences. Revision rhinoplasty was realized in 5 cases (14 %) and was not related to surgical variables; revision for orthognathic surgery was not necessary in this series. Rhinoplasty and orthognathic surgery simultaneously show low complications and predictable results. We can conclude that maxillary mandibular osteotomies and rhinoplasty could be performed safely. However, larger studies are necessary to understand the best choice and variables involved in simultaneous procedures and soft tissue response.

La cirugía ortognática y la rinoplastia muestran sinergia en términos de resultados funcionales y estéticos. EL objetivo de esta investigación es analizar variables relacionadas con la cirugía ortognática y rinoplastia ejecutada de forma simultanea. Fueron incluidos hombres y mujeres entre 18 y 45 años de edad. EL diagnóstico fue en base a la morfología nasal (punta bífida, rotada, cuadrada u otras así como alteraciones del ala nasal y columela), deformidad facial (deformidad sagital y vertical), tipo de cirugía (técnica de rinoplastia y cirugía ortognática) y complicaciones asociadas. El seguimiento mínimo fue de 12 meses; se utilizo las prueba t test y chi cuadrado para definir relaciones estadísticas considerando un valor de p< 0,05 para obtener diferencias significativas. La deformidad clase III fue observada en el 40 % de los sujetos y la deformidad facial de clase II se presento en el 43 %. Para la deformidad nasal, las alteraciones de a punta nasal y nasal fueron mas prevalentes; la deformidad nasal primaria se presentó en el 83 % de los sujetos y fue significativamente mayor que la deformidad nasal secundaria (p=0,042). La cirugía bimaxilar se realizó en 31 casos (88 %); en 10 casos se realizó el cambio del plan quirúrgico inicial de la rinoplastia debido a cambios generados en la cirugía maxilar previa, mayormente en deformidad facial de clase III, sin presentar diferencias significativas. La rinoplastia de revisión fue realizada en 5 casos (14 %) y no fue relacionada con ninguna variable de tipo quirúrgica; la revisión de cirugía ortognática no fue realizada en ningún caso de esta serie. La rinoplastia y la cirugía ortognática simultanea mostraron bajas complicaciones y resultados predecibles. Se puede concluir que la osteotomía maxilo mandibular y la rinoplastia son seguras; sin embargo, estudios de mayor volumen son necesarios para entender la mejor opción y variables relacionadas con procedimientos simultáneos y la respuesta de tejidos blandos faciales.

Late correction of orbital deformities using customized 3D implant / Corrección tardía de deformidades de órbita usando implantes personalizados 3D

SUMMARY: Late orbital reconstruction is a complex and challenge for surgeons. The aim of this article is to present complex orbital reconstruction using patient specific implant (PSI) strategy and polyetheretherketone (PEEK). A literature review and a cases series of sequelae after complex orbital trauma are presented; cases with great middle third deformities showing defect in the maxilla, nasal area, body of the zygoma and zygomatic arch were included; in both cases the sequelae was for more than 10 years. Virtual planning and PEEK implants were manufacture using a puzzle (two or three parts) by 3D print or injection. Patients were treated and their surgeries carried out without complications, using a minimal surgical approach. No infections were observed, and after 12 months follow-up they were stable showing normal function. PSI based-PEEK for orbital reconstruction are safe, efficient, effective and to obtain orbital morphology with low complications.

RESUMEN: La reconstrucción tardía de la órbita es un desafío complejo para cirujanos. El objetivo de este artículo fue presentar la reconstrucción orbitaria compleja utilizando implante paciente específico (PSI) y polietereterketona (PEEK). Son presentados una revisión de literatura y una serie de casos con secuelas posteriores a un trauma orbitario complejo; además, son presentados casos con gran deformidad del tercio medio del rostro mostrando defectos en maxila, área nasal, cuerpo del hueso cigomático y arco cigomático; ambos casos de secuela fueron por más de 10 años. Planificación virtual e implantes en PEEK fueron creados usando una estrategia de puzzle (dos o tres partes) por inyección o impresión 3D. Los pacientes fueron tratados y sus cirugías realizadas sin complicaciones usando accesos quirúrgicos reducidos. No se observaron infecciones y después de 12 meses de seguimiento permanecieron estables mostrando función normal. Los PSI para reconstrucción orbitaria son seguros, eficientes, efectivos y recuperan morfología de órbita con bajas complicaciones.

Indications of Free Grafts in Mandibular Reconstruction, after Removing Benign Tumors: Treatment Algorithm.

BACKGROUND: Mandibular reconstruction has been the subject of much debate and research in the fields of maxillofacial surgery and head and neck surgery. MATERIALS AND METHODS: A retrospective observational study was undertaken with 14 patients diagnosed with benign tumorous pathologies and who underwent immediate mandibular resection and reconstruction at the Hospital del Salvador Maxillofacial Surgery Unit and Dr. Rodrigo Fariña's private clinic between the years 2002 and 2012. We propose a treatment algorithm, which is previous teeth extractions in area that will be removed. RESULTS: Fourteen patients underwent surgery, and a total of 40 dental implants were installed in 6 men and 8 women, the mean age of 33.5 (age range, 14-58 y). Reconstruction with iliac crest bone graft, and rehabilitation following this protocol (average of reconstruction was 8.7 cm), was successful with no complications at all in 12 patients. One patient had a minor complication, and the graft was partially reabsorbed because of communication of the graft with the oral cavity. This complication did not impede rehabilitation with dental implants. Another patient suffered the total loss of the graft due to infection because of dehiscence of oral mucosa and great communication with the mouth. Another iliac crest free graft reconstruction was undertaken 6 months later. CONCLUSIONS: The scientific evidence suggests that mandibular reconstruction using free grafts following the removal of benign tumors is a biologically sustainable alternative. The critical factor to improve the prognosis of free grafts reconstruction in benign tumors is to have good quality soft tissue and avoid communication with the oral cavity. For this, it is vital to do dental extractions before removing the tumor.

Influencia de rhBMP-2 en la reparación ósea de defectos críticos con diferentes biomateriales / Influence of rhBMP-2 on bone repair of critical size defects with different biomaterials

La regeneración de defectos óseos críticos requiere la utilización de biomateriales óseos. Así, se han utilizados agentes osteogénicos como la proteína morfogenética (rhBMP-2). El objetivo fue describir la formación ósea de defectos óseos críticos en calota de ratas utilizando rhBMP-2 con distintos biomateriales. Se realizaron dos defectos óseos críticos de 5 mm en 15 calotas de ratas machos adultas divididos en grupo control (sin tratamiento) (C); autoinjerto + rhBMP-2 (A); fosfato tricálcico + rhBMP-2 (BTCP); xenoinjerto de bovino + rhBMP-2 (B) y hidroxihapatita + rhBMP-2 (HA). A las ocho semanas post tratamiento, se realizó la eutanasia y posterior análisis histológico de los defectos. El grupo C no presentó formación de tejido óseo en el defecto. En el resto de los grupos, se formó abundante tejido óseo en los márgenes, por lo tanto, el defecto presentó menor tamaño. El grupo HA presentó formación ósea trabecular con amplios espacios medulares y abundante tejido adiposo. El grupo B-TCP también presentó formación ósea trabecular y la mayoría de las muestras presentaron puente óseo en el defecto. El grupo B presentó partículas de material injertado rodeado por trabéculas óseas y tejido conectivo. En el grupo A, todas las muestras presentaban puente óseo formado por bloques de autoinjerto rodeado por tejido conectivo y óseo. Es posible concluir que los defectos óseos de 5 mm en calota de rata son defectos críticos que requieren utilizar biomateriales para la reparación del defecto. El grupo B-TCP presentó características histológicas más próximas a la regeneración ósea lograda con el Grupo A.

The regeneration of bone critical size defects requires the use of bone biomaterials. Therefore, an osteogenic agent such as bone morphogenetic protein (rhBMP-2) has been used. The objective was to describe the bone formation of bone critical size defects in the rat calvaria using rhBMP-2 with different biomaterials. Two critical bone defects of 5 mm were made in 15 calvaria of adult male rats divided into a control group (without treatment) (C); autograft + rhBMP-2 (A); tricalcium phosphate + rhBMP-2 (B-TCP); bovine xenograft + rhBMP-2 (B) and hydroxyhapatite + rhBMP-2 (HA). At eight weeks post treatment, euthanasia and subsequent histological analysis of the defects were performed. Group C did not show bone tissue formation in the defect. In the rest of the groups, abundant bone tissue formed in the margins, therefore, the defect was smaller. The HA group presented trabecular bone formation with large medullary spaces and abundant adipose tissue. The B-TCP group also presented trabecular bone formation and most of the samples formed a bone bridge across the defect. Group B presented grafted material particles surrounded by bone trabeculae and connective tissue. In group A, all samples presented a bone bridge formed by autograft blocks surrounded by connective and bone tissue. It is possible to conclude that 5 mm bone defects in rat calvaria are critical size defects that require the use of biomaterials for defect repair. The B-TCP group presented histological characteristics similar to the bone regeneration achieved with Group A.

Characterization of bone substitute beta946; -TCP block for maxillofacial reconstruction / Caracterización del bloque beta946; -TCP de sustitución ósea para la reconstrucción maxilofacial

SUMMARY: The aim of this study was to characterize a commercial beta tricalcium phosphate (β-TCP) block allograft for use in maxillofacial reconstruction, evaluating its homogeneity, porosity and mineralization. Two commercial 5 x 5 x10 mm chronOS Vivify β-TCP blocks were used, which were evaluated by a STEM SU-3500 variable pressure scanning electron microscope (SEM-STEM) (Hitachi, Japan). For the semi-quantitative microanalysis of elements, the QUANTAX 100 energy dispersive x-ray spectrometer detector (EDX) (Bruker, Germany) was used. The homogeneity of the structural morphology, macropore and micropore size and component homogeneity were evaluated. The microscopic analysis showed micropores of 164.92 mm (± 35.032 mm) in diameter in the outer area and micropores in the inner area of 54.44 mm (± 17.676 mm). The formation of porosities and irregularities present in the block was heterogeneous between the outer and inner surfaces. The mineral content of the blocks presented homogeneity with the presence of carbon (2.02 %), oxygen (44.33 %), phosphate (16.62 %) and calcium (37.87 %). The β-TCP block can be used in bone reconstruction but the presence of reduced macropore and micropore sizes could limit efficiency in the substitution and bone regeneration phase.

RESUMEN: El objetivo de este estudio fue caracterizar un aloinjerto de bloqueo de fosfato tricálcico (β-TCP) comercial para su uso en la reconstrucción maxilofacial, evaluando su homogeneidad, porosidad y mineralización. Se utilizaron dos bloques comerciales de 5 x 5 x 10 mm de vivify β-TCP de chronOS, que se evaluaron mediante un microscopio electrónico de barrido de presión variable STEM SU-3500 (SEM-STEM) (Hitachi, Japón). Para el microanálisis de elementos semicuantitativo, se utilizó el detector de espectrómetro de rayos X de dispersión de energía QUANTAX 100 (EDX) (Bruker, Alemania). Se evaluó la homogeneidad de la morfología estructural, el tamaño del macroporo y microporo y la homogeneidad de los componentes. El análisis microscópico mostró microporos de 164,92 mm (± 35,032 mm) de diámetro en el área externa y microporos en el área interna de 54,44 mm (± 17,676 mm). La formación de porosidades e irregularidades presentes en el bloque fue heterogénea entre las superficies externas e internas. El contenido mineral de los bloques presentó homogeneidad con la presencia de carbono (2,02 %), oxígeno (44,33 %), fosfato (16,62 %) y calcio (37,87 %). El bloque β-TCP se puede utilizar en la reconstrucción ósea, pero la presencia de macroporos y tamaños de microporos reducidos podría limitar la eficacia en la fase de sustitución y regeneración ósea.

Odontodisplasia Regional y Agenesia de Premolares. Reporte de un Caso / Regional Odontodysplasia and Premolar Agenesis. Case Report

RESUMEN: La odontodisplasia regional (OR) es una alteración en el desarrollo, no hereditario y que afecta tanto la dentición temporal como la dentición definitiva. Involucra a los tejidos mesodérmicos y ectodérmicos de los dientes lo que es condescendiente con hallazgos clínicos, radiográficos e histológicos. Su etiología aun es desconocida y se presenta mayoritariamente en mujeres. Clínicamente puede afectar al maxilar, a la mandíbula o ambas arcadas pero generalmente solo se ve comprometida una ellas, principalmente el más afectado es el hueso maxilar. Radiográficamente se observa una pobre diferencia entre los tejidos del esmalte y la dentina, siendo tejidos menos radiopacos que su contraparte sana generando un aspecto descrito como "diente fantasma". Histológicamente se observan zonas hipocalcificadas del esmalte con un orden de prismas irregulares mientras que la dentina se observa con un número reducido de túbulos dentinarios y de consistencia más fibrosa en su zona coronal. El tratamiento de la OR es controversial ya que su incidencia es baja y la literatura al respecto no es clara. El objetivo de este manuscrito, fue reportar un caso de OR y revisar la literatura relacionada. Presentamos un caso de OR en una paciente de 12 años que presenta ausencia de los dientes 2.4, 2.5 y 2.6; restos radiculares y agenesia de los dientes 3.5 y 4.5. Se describirán sus aspectos clínicos, radiográficos e histológicos. Se realizó una búsqueda sistemática en las siguientes bases de datos: Clínical key, Science Direct, PubMed y SciELO.

ABSTRACT: Regional odontodysplasia (RO) is a variation in the development; it is not hereditary and it affects both deciduous and permanent dentition. It involves the mesodermal and ectodermal tissues of dental pieces, and coincides with clinical, radiographic and histological findings. Its etiology is still unknown and it reportedly occurs mostly in women. Clinically it can affect the maxilla, mandible or both arches but generally only one is compromised, mainly the maxilla which is affected the most. Radiographically there is limited difference between enamel and dentin tissue, which is less radiopaque than their healthy counterpart, generating an aspect described as "phantom tooth". Histologically hypocalcified areas of the enamel are observed with an irregular order of prisms while the dentine is observed with a reduced number of dentinal tubules and more fibrous consistency in the coronal area. RO treatment is controversial since its incidence is low and the literature on these events is not clear. The aim of this manuscript was to report a case of RO and review related literature. We present a case of RO in a 12-year-old patient who presents absence of parts 2.4.2.5 and 2.6; radicular remains and agenesis of parts 3.5 and 4.5. Its clinical, radiographic and histological aspects are described. A systematic search was carried out in the following databases: Clinical key, Science Direct, PubMed and SciELO.

Three-dimensional analysis of nasolabial soft tissues while smiling using stereophotogrammetry (3dMDTM) / Análisis tridimensional de los tejidos blandos nasolabiales en sonrisa utilizando estereofotogrametría (3dMDTM)

SUMMARY: The nasolabial region is the central esthetic unit of the face and is considered one of the most important determinants of the facial esthetic. The facial morphometry of soft tissues is a very important tool in facial surgery. Advances have been made recently in the capture and analysis of 3D images, which offer great development potential in the diagnosis and treatment of facial deformities. The aim of this study was to characterize the nasolabial region of patient candidates for orthognathic surgery using 3D facial captures. A study was conducted to characterize the width of the nasal base and the nasolabial angle in adult patients through 3D photographs. 30 subjects were included, taking two 3D photos each, one in a resting position and the other smiling. The three-dimensional capture was done with the 3dMDface System. The measurements were taken with the 3dMD Vultus software. The length of the alar base was an average of 34.3 ± 2.6 mm at rest, and 39.1 ± 2.9 mm smiling. The mean of the nasolabial angle was 104.6 ± 9.6° at rest and 105.4 ± 14.3º smiling. Additionally, the distance of the alar base smiling compared to its distance at rest increased an average of 4.83 mm, whereas the nasolabial angle smiling increased an average of 0.8º compared to at rest. In this study, the nasolabial angle did not present any significant changes so that its assessments in the case of facial modifications can be standard; the width of the nasal base is significantly modified with the smile and thus a more intense study of any type of modification in this area is required.

RESUMEN: La región nasolabial es la unidad estética central de la cara y se considera uno de los determinantes más importantes de la estética facial. La morfometría facial en tejidos bandos, es una herramienta de gran importancia en Cirugía Facial. En el último tiempo, se han realizado avances en captura y análisis de imágenes 3D, las cuales ofrecen un gran potencial de desarrollo en el diagnóstico y tratamiento de las deformidades faciales. El objetivo de éste trabajo fue caracterizar mediante capturas faciales 3D la región nasolabial de pacientes candidatos a cirugía ortognática. Se realizó un estudio para caracterizar a través de fotografías tridimensionales de pacientes adultos el ancho de la base nasal y el ángulo nasolabial. Se incluyeron 30 sujetos, tomando 2 fotografías 3D a cada uno, una en posición de reposo y otra en sonrisa. Se realizó la captura tridimensional con la camara facial 3dMDface System. Las mediciones fueron realizadas con el software 3dMD Vultus. La longitud de base alar en reposo, fue en promedio de 34,3 ± 2,6 mm, y de 39,1 ± 2,9 mm, en sonrisa. Por otra parte, la media del ángulo nasolabial en reposo fue de 104,6 ± 9,6° y en sonrisa, de 105,4 ± 14,3º. Por otro lado, la distancia de la base alar en sonrisa respecto a su distancia en reposo, aumentó un promedio de 4,83 mm, mientras que el ángulo nasolabial en sonrisa, aumentó en promedio 0,8º respecto a la posición de reposo. En esta investigación, el ángulo nasolabial no presentó cambios significativos de forma que su valoración frente a modificaciones faciales puede ser estándar; el ancho de base nasal se modifica significativamente con la sonrisa de forma que su estudio debe ser más agudo frente a cualquier tipo de modificación en esta zona.

PLA/PGA and its co-Polymers in Alveolar Bone Regeneration. A Systematic Review / PLA/PGA y sus Copolímeros en Regeneración Ósea Alveolar. Una Revisión Sistemática

ABSTRACT: The aim of this research was to perform a systematic review to identify the most frequent uses of PLA/ PGA in alveolar bone regeneration and their results. A study was designed to answer the question: What are the most frequent uses of PLA/PLGA and their copolymers in alveolar bone regeneration?. A systematic search was done on MEDLINE, EMBASE and LILACS from April 1993 to December 2017. The search string used on MEDLINE was: (((polylactic acid) OR PLA) OR PLA-based copolymers) OR PLA blends) OR PLA scaffolds)) AND ((("Bone Regeneration"[Mesh]) OR bone regeneration) OR guided bone regeneration). The search was complemented by a manual review of the references from the articles included. Most of the studies selected were weak and, regarding the most frequent uses of PLA/PGA, 13 studies used it as a resorbable membrane, two as an absorbable mesh, one as an absorbable screw and three as filling material. Based on our results, the authors consider that PLA/PGA requires a delicate relation between the mechanical resistance and the degradation process. PLA/PGA does not interrupt bone regeneration; however, the influence in cellular events related to bone regeneration and later osseointegration have not been identified.

RESUMEN: El objetivo de esta revisión fue realizar una revisión sistemática de la literatura para identificar los usos más frecuentes de PLA/PGA en regeneración ósea en área maxilofacial y sus resultados. Se diseñó un estudio para responder a la pregunta: ¿Cuáles son los usos más frecuentes de PLA/PLGA y sus copolímeros en regeneración ósea en el sector maxilofacial?. Los estudios seleccionados fueron en su mayoría débiles y sobre los usos más frecuentes de PLA/PGA, 13 estudios lo utilizaron como membrana reabsorbible, 2 estudios como malla absorbible, un estudio como tornillo absorbible y 3 estudios como material de relleno. En base a nuestros resultados, los autores estiman que PLA/PGA requiere una delicada relación entre la resistencia mecánica que ofrece y la degradación que se produce; PLA/ PGA no interrumpe la regeneración ósea, sin embargo, no se ha identificado la potencialidad o influencia que presenta en los eventos celulares de la regeneración y posterior oseointegración.

Facial asymmetry and condylar hyperplasia: considerations for diagnosis in 27 consecutives patients.

Facial asymmetry associated with condylar hyperplasia (CH) has been become the object of study in recent years. The aim of this study is to demonstrate the importance of analyzing the presence of CH in cases of facial asymmetry. Twenty-seven consecutive patients were studied without distinction of age or gender; all the patients consulted for treatment of facial and/or mandibular asymmetry and voluntarily agreed to participate in the study. All the patients underwent facial cone beam tomography and bilateral TMJ as well as a detailed history where they indicated the progression of the disease; in cases of active evolution determined by clinical analysis and imaging, a SPECT analysis was performed to define the isotope uptake. 29.6% of the subjects with scintigram exhibited active CH with a more than 10% difference in uptake between the two condyles; 18.5% presented differences in uptake between 5% and 10%. Active CH was related to the age and gender of the subjects, being more prevalent in women than in men. The aggression level of the uptake was also related to the subject's age. 55% of the subjects presented with some type of orthodontic treatment with no diagnosis of TMJ pathology in the initial consultation. It can be concluded that CH is associated with facial asymmetries and must be studied integrally before assessing treatment options.

Osteosíntesis Bioreabsorbible Bioactivo (Hidroxiapatita/Poly L-lactido) en Osteotomía Le Fort I Segmentada / Bioresorbable Bioactive Osteosynthesys (Hidroxiapatite/Poly L-lactide) in Le Fort I Segmented Osteotomy

RESUMEN: El objetivo de este artículo es presentar un caso clínico con la utilización de un innovador sistema de osteosíntesis basado en la mezcla de hidroxiapatita (HA) y acido poliláctico (PLLA). La paciente fue admitida en el Hospital Abraham González Peña de Lautaro (Chile) debido a una deformidad facial que exigió realizar una cirugía ortognática monomaxilar para avance y aumento transversal del maxilar; se utilizaron placas de tipo L y tornillos de HA/PLLA de 5 mm para la fijación maxilar, realizando la cirugía sin complicaciones; el proceso técnico y alta hospitalaria se ejecutó de forma convencional. Se realizó un análisis de la literatura donde se analiza la versatilidad, la seguridad y la estabilidad de segmentos cuando se utiliza este innovador material y se concluye que este tipo de osteosíntesis es aplicable a cirugía maxilofacial, exigiendo una curva de aprendizaje por parte del cirujano, necesaria para obtener resultados adecuados.

ABSTRACT: The aim of this paper is to show a clinical case, where was used an innovative osteosynthesys system based on the mixture of hidroxiapatite (HA) and polilactic acid (PLLA). The patient was admitted into Abraham González Peña Hospital (Chile), showing a facial deformity to treat with monomaxillary orthognathic surgery for advance and transversal increase of the maxilla.; were used type L plates and 5 mm screws of HA/PLLA for the internal fixation, performing the surgery without complications; the technical process and the ALTA hospital was realized in a conventional strategy. Was realized a literature review showing the versatility, safe and stability of bone segment when used this innovative material and it´s concluded that this osteosynthesis system can be used normally in maxillofacial surgery; a learning curve to learn about this material is needed by surgeons.

Mandible condylar hyperplasia: a review of diagnosis and treatment protocol.

Condylar hyperplasia (CH) is a bone disease characterized by the increased development of one mandibular condyle. It regularly presents as an active growth with facial asymmetry generally without pain. Statistically it affects more women in adolescence, although it does not discriminate by age or gender. Its best-known consequence is asymmetric facial deformity (AFD), which combined with alteration of the dental occlusion with unilateral crossbite or open bite. It is not known when CH begins and how long it lasts; diagnostic examinations are described and are efficient in some research about diagnosis. Protocol treatment is not well studie and depends on the criteria described in this paper. The aim of this research is to provide up-to-date information about the diagnosis of this disease and to analyze the treatment protocol, visualizing the CH and AFD presented.

[Relationship Between Condylar Size and Transverse Facial Asymmetry in Subject with Condylar Hyperplasia]. / Relación Entre el Tamaño Condilar y la Asimetría Facial Transversal en Individuos con Hiperplasia Condilar.

Facial asymmetry is a functional and esthetic pathology that can be related to condylar hyperplasia; the aim of this research was to asses the condylar size in the facial asymmetry. Twelve subjects was studies with cone beam computed tomography; the analysis was realized in the software Pax Zenith, Vatech (Korea 2011), using 90 kV and 120 mA and was realized anterior-posterior measurement, superior and inferior measurement and medial-lateral measurement of condylar head and was realized the relations with condylar position with the medial facial line and the position of facial point between superior central incisior, inferior central incisior and chin. The results show that the chin was displaced 6.5 mm from middle line being a hyperplasic condyle with a 2.7 mm more than no hyperplasic condyle. 1 mm of displacement of low central incisor was associated to 2.2 mm of chin displacement. The hyperplasic condyle presented more size and was posicionated 2 mm more lateral than non-hyperplasic condyle. Is conclude that the hyperplasic condyle present a clear influence in the facial transversal asymmetry and in possible to establish a relation between the size of hyperplasic condyle and the facial asymmetry.