Moving towards IoT Based Digital Communication: An Efficient Utilization of Power Spectrum Density for Smart Cities.

The future of the Internet of Things (IoT) is interlinked with digital communication in smart cities. The digital signal power spectrum of smart IoT devices is greatly needed to provide communication support. The line codes play a significant role in data bit transmission in digital communication. The existing line-coding techniques are designed for traditional computing network technology and power spectrum density to translate data bits into a signal using various line code waveforms. The existing line-code techniques have multiple kinds of issues, such as the utilization of bandwidth, connection synchronization (CS), the direct current (DC) component, and power spectrum density (PSD). These highlighted issues are not adequate in IoT devices in smart cities due to their small size. However, there is a need to design an effective line-code method to deal with these issues in digital IoT-based communication for smart technologies, which enables smart services for smart cities. In this paper, the Shadow Encoding Scheme (SES) is proposed to transmit data bits efficiently by using a physical waveform in the smart cities' ecosystem. SES provides a reliable transmission over the physical medium without using extra bandwidth and with ideal PSD. In it, the shadow copy of the repeating bitstream is forwarded, rather than repeating the actual stream again and again. The PSD is calculated with the help of mathematical equations to validate SES. MATLAB simulator is used to simulate SES and compared with other well-known digital line-code techniques. The bit error rate is also compared between SES and the chirp spread spectrum (CSS) for the specific data frames. The coordinates of the PSD graph are also shown in tabular form, which shows a vivid picture of the working conditions of various line codes.

Partitioned Stator Switched Flux Machine: Novel Winding Configurations.

Torque density is one of the major limiting factors in machine design. In this paper, we propose the hybrid excited partitioned stator switched flux machine3 (HE-PSSFM3). In HE-PSSFM3, armature winding is positioned on the outer stator whereas the permanent magnet (PM) and field winding are placed at the inner stator, while the rotor is free from excitation sources and armature winding. Moreover, concentrated field winding is replaced by toroidal winding. The power splitting ratio between two stators/rotor pole combinations is analytically optimized and are validated through genetic algorithm (GA) in order to enhance average torque and flux regulation capability. The electromagnetic characteristics of the improved and initial design are evaluated and compared with existing designs, i.e., HE-PSSFM1 and HE-PSSFM2. The proposed HE-PSSFM3 has achieved high average torque, i.e., 2.0015 Nm, at same armature and field current densities of 5 A/mm2. The results show that the average torques of the proposed design are 35% and 15% greater than HE-PSSFM1 and HE-PSSFM2, respectively. Furthermore, the analysis of various parameters such as flux linkage, flux regulation, electromagnetic performances, cogging torque, back EMF, electromagnetic torque, and torque ripples are investigated using two dimensional (2D) finite element analysis (FEA). Moreover, the simulation results of the proposed design are validated through GA and analytical modeling.

DSP-Assisted Nonlinear Impairments Tolerant 100 Gbps Optical Backhaul Network for Long-Haul Transmission.

High capacity long haul communication and cost-effective solutions for low loss transmission are the major advantages of optical fibers, which makes them a promising solution to be used for backhaul network transportation. A distortion-tolerant 100 Gbps framework that consists of long haul and high capacity transport based wavelength division multiplexed (WDM) system is investigated in this paper, with an analysis on different design parameters to mitigate the amplified spontaneous emission (ASE) noise and nonlinear effects due to the fiber transmission. The performance degradation in the presence of non-linear effects is evaluated and a digital signal processing (DSP) assisted receiver is proposed in order to achieve bit error rate (BER) of 1.56 × 10-6 and quality factor (Q-factor) of 5, using 25 and 50 GHz channel spacing with 90 µm2 effective area of the optical fiber. Analytical calculations of the proposed WDM system are presented and the simulation results verify the effectiveness of the proposed approach in order to mitigate non-linear effects for up to 300 km length of optical fiber transmission.

Wireless E-Nose Sensors to Detect Volatile Organic Gases through Multivariate Analysis.

Gas sensors are critical components when adhering to health safety and environmental policies in various manufacturing industries, such as the petroleum and oil industry; scent and makeup production; food and beverage manufacturing; chemical engineering; pollution monitoring. In recent times, gas sensors have been introduced to medical diagnostics, bioprocesses, and plant disease diagnosis processes. There could be an adverse impact on human health due to the mixture of various gases (e.g., acetone (A), ethanol (E), propane (P)) that vent out from industrial areas. Therefore, it is important to accurately detect and differentiate such gases. Towards this goal, this paper presents a novel electronic nose (e-nose) detection method to classify various explosive gases. To detect explosive gases, metal oxide semiconductor (MOS) sensors are used as reliable tools to detect such volatile gases. The data received from MOS sensors are processed through a multivariate analysis technique to classify different categories of gases. Multivariate analysis was done using three variants-differential, relative, and fractional analyses-in principal components analysis (PCA). The MOS sensors also have three different designs: loading design, notch design, and Bi design. The proposed MOS sensor-based e-nose accurately detects and classifies three different gases, which indicates the reliability and practicality of the developed system. The developed system enables discrimination of these gases from the mixture. Based on the results from the proposed system, authorities can take preventive measures to deal with these gases to avoid their potential adverse impacts on employee health.