RESUMO
Nanoscale structures that could mimic the selective transport and extraordinarily fast flow possible in biological cellular channels would have a wide range of potential applications. Here we show that liquid flow through a membrane composed of an array of aligned carbon nanotubes is four to five orders of magnitude faster than would be predicted from conventional fluid-flow theory. This high fluid velocity results from an almost frictionless interface at the carbon-nanotube wall.
Assuntos
Materiais Biomiméticos/metabolismo , Microfluídica/métodos , Nanotubos de Carbono/química , Aquaporinas/metabolismo , Materiais Biomiméticos/química , Biomimética , Fricção , Ligação de Hidrogênio , Cinética , ViscosidadeRESUMO
Widespread use of carbon nanotubes is predicted for future and concerns have been raised about their potential health effects. The present study determined the pulmonary response of mice to multi-wall carbon nanotubes (MWCNTs). The MWCNT suspension in sterile phosphate-buffered saline (PBS) was introduced into mice lungs by oropharyngeal aspiration. Female C57Bl mice were treated with either 20 or 40 microg of MWCNTs in 40 microl PBS and control groups received equal volume of PBS. From each group, half of the mice were euthanized at day 1 and the remaining half at day 7 post treatment. Bronchoalveolar lavage (BAL) fluids, serum, and lung tissue samples were analyzed for inflammatory and oxidative stress markers. The results showed significant cellular influx by a single exposure to MWCNTs. Yields of total cells and the number of polymorphonuclear leukocytes in BAL cells were significantly elevated in MWCNT-treated mice post-treatment days 1 and 7. Analysis of cell-free BAL fluids showed significantly increased levels of total proteins, lactate dehydrogenase, tumor necrosis factor-alpha, interleukin-1beta, mucin, and surfactant protein-D (SP-D) in MWCNT-treated mice at day 1 post treatment. However, these biomarkers returned to basal levels by day 7 post exposure except mucin and SP-D. An increase in the urinary level of 8-hydroxy-2'-deoxyguanosine in mice treated with MWCNT suggested systemic oxidative stress. Western analysis of lung tissue showed decreased levels of extracellular superoxide dismutase (SOD) protein in MWCNT-treated mice but copper/zinc and manganese SOD remained unchanged. It is concluded that a single treatment of MWCNT is capable of inducing cytotoxic and inflammatory response in the lungs of mice.
Assuntos
Pulmão/efeitos dos fármacos , Nanotubos de Carbono/toxicidade , 8-Hidroxi-2'-Desoxiguanosina , Animais , Western Blotting , Líquido da Lavagem Broncoalveolar/citologia , Contagem de Células , Desoxiguanosina/análogos & derivados , Desoxiguanosina/urina , Feminino , Exposição por Inalação , Interleucina-1beta/metabolismo , L-Lactato Desidrogenase/metabolismo , Pulmão/metabolismo , Camundongos , Camundongos Endogâmicos C57BL , Mucinas/metabolismo , Proteína A Associada a Surfactante Pulmonar/metabolismo , Proteína D Associada a Surfactante Pulmonar/metabolismo , Superóxido Dismutase/sangue , Fator de Necrose Tumoral alfa/metabolismo , Ácido Úrico/sangueRESUMO
Ozone (O3) is a well-investigated gaseous air pollutant known to produce acute and chronic toxicity in the respiratory system. Whether prior exposure to nanoparticles influences the toxicity of O3 has not been well investigated. To determine if there are toxicological interactions between particulate and gas exposures, we examined acute pulmonary effects of a 3-h ozone exposure (0.5 ppm) in female C57Bl mice that had been preexposed to a single dose of 20 microg multiwall carbon nanotubes (CNT) by pharyngeal aspiration 12 h earlier. A total of four groups were compared: (1) PBS/air-control, (2) PBS/O3, (3) CNT/air, and (4) CNT/O3. Analyses of the bronchoalveolar lavage fluid (BALF) and lung tissue samples collected at 5 and 24 h post O3 exposure were performed for various markers of cytotoxicity and inflammation using standard enzyme-linked immunosorbent assay (ELISA) and immunoblot procedures. The results showed a pronounced cellular response and increase in various cytotoxicity/inflammatory markers in the lungs of CNT-exposed mice. Ozone by itself produced minimal effects, but in CNT-exposed animals there was a significant increase in total brochoalveolar lavage (BAL) cells and polymorphonuclear leukocytes. Additionally, protein, lactate dehydrogenase (LDH), tumor necrosis factor (TNF)-alpha, interleukin (IL)-1beta, and mucin levels in BALF at 5 and 24 h were higher in CNT-exposed animals than in corresponding air-exposed controls or animals exposed to O3 alone. A comparable increase over the controls was also observed in the CNT/O3 group, but neither an additive nor a synergistic interaction was observed in mice that received sequential exposure to CNT and ozone. In fact, some CNT-induced cytotoxic/inflammatory responses were attenuated in mice following exposure to both CNT and low levels of ozone. These results are contrary to enhanced responses that were anticipated and may represent the development of "cross-tolerance" reported by others for some sequentially administered pollutants.
Assuntos
Poluentes Atmosféricos/toxicidade , Pulmão/efeitos dos fármacos , Nanotubos de Carbono/toxicidade , Oxidantes Fotoquímicos/toxicidade , Ozônio/toxicidade , Pneumonia/induzido quimicamente , Doença Aguda , Administração por Inalação , Animais , Biomarcadores/análise , Líquido da Lavagem Broncoalveolar/química , Líquido da Lavagem Broncoalveolar/citologia , Contagem de Células , Interações Medicamentosas , Quimioterapia Combinada , Feminino , Exposição por Inalação , Interleucina-1beta/análise , L-Lactato Desidrogenase/análise , Pulmão/metabolismo , Pulmão/patologia , Camundongos , Camundongos Endogâmicos C57BL , Mucinas/análise , Neutrófilos/efeitos dos fármacos , Neutrófilos/patologia , Estresse Oxidativo , Pneumonia/metabolismo , Pneumonia/patologia , Proteínas/análise , Superóxido Dismutase/metabolismo , Fator de Necrose Tumoral alfa/análiseRESUMO
Acrylic bone cement, based on polymethylmethacrylate (PMMA), is a proven polymer having important applications in medicine and dentistry, but this polymer continues to have less than ideal resistance to mechanical fatigue and impact. A variety of materials have been added to bone cement to augment its mechanical strength, but none of these augmentative materials has proven successful. Carbon nanotubes, a new hollow multiwalled tubular material 10-40 nm in diameter, 10-100 microm long, and 50-100 times the strength of steel at 1/6 the weight, have emerged as a viable augmentation candidate because of their large surface area to volume ratio. The objective of this study was to determine if the addition of multiwall carbon nanotubes to bone cement can alter its static or dynamic mechanical properties. Bar-shaped specimens made from six different (0-10% by weight) concentrations of multiwall carbon nanotubes were tested to failure in quasi-static 3-point bending and in 4-point bending fatigue (5 Hz). Analyses of variance and the 3-Parameter Weibull model were used to analyze the material performance data. The 2 wt % MWNT concentration enhanced flexural strength by 12.8% (p=0.003) and produced a 13.1% enhancement in yield stress (p=0.002). Bending modulus increased slightly with the smaller (<5 wt % MWNT) concentrations, but increased 24.1% (p<0.001) in response to the 10 wt % loading. While the 2 wt % loading produced slightly improved quasi-static test results, it was associated with clearly superior fatigue performance (3.3x increase in the Weibull mean fatigue life). Weibull minimum fatigue life (No), Weibull modulus (alpha), and characteristic fatigue life (beta) for bone cement augmented with carbon nanotubes were enhanced versus that observed in the control group. These data unambiguously showed that the bone cement-MWNT polymer system has an enhanced fatigue life compared to "control" bone cement (no added nanotubes). It is concluded that specific multiwall carbon nanotube loadings can favorably improve the mechanical performance of bone cement.
Assuntos
Materiais Biocompatíveis/química , Cimentos Ósseos/química , Nanotubos de Carbono/química , Polimetil Metacrilato/química , Força Compressiva , Análise de Falha de Equipamento , Teste de Materiais , Nanotubos de Carbono/ultraestrutura , Maleabilidade , Estresse Mecânico , Propriedades de Superfície , Resistência à TraçãoAssuntos
Saúde da Criança , Avaliação Educacional , Saúde da Família , Disparidades nos Níveis de Saúde , Nível de Saúde , Adulto , Negro ou Afro-Americano , Criança , Saúde da Criança/estatística & dados numéricos , Pré-Escolar , Intervenção Educacional Precoce , Escolaridade , Saúde da Família/educação , Saúde da Família/estatística & dados numéricos , Hispânico ou Latino , Humanos , Estados Unidos , População BrancaRESUMO
A new approach to the modification of carbon nanotubes with biomolecules for the development of nanoscale biosensors is presented. Alkaline phosphatase was immobilized on the surface of multi-wall carbon nanotubes utilizing a layer-by-layer methodology. Carbon nanotubes were incubated with streptavidin, resulting in the formation of a protein layer on the surface of the nanotubes. Biotinylated alkaline phosphatase was then allowed to bind to streptavidin, anchoring the sensing protein onto the surface. Electrochemical biosensors were constructed by using carbon nanotubes compacted into pellets. 1-Naphthyl phosphate, which is hydrolyzed by alkaline phosphatase to the electroactive 1-naphthol, was used as a substrate. Electrodes constructed in this manner were observed to generate an electrochemical signal that was a function of substrate concentration.
Assuntos
Técnicas Biossensoriais/métodos , Enzimas Imobilizadas/química , Nanotecnologia/métodos , Nanotubos de Carbono/química , Proteínas/química , Adsorção , Fosfatase Alcalina/química , Técnicas Biossensoriais/instrumentação , Carbono/química , Relação Dose-Resposta a Droga , Eletroquímica , Eletrodos , Cinética , Microscopia Eletrônica de Transmissão , Naftóis/química , Estreptavidina/químicaRESUMO
Well-aligned nitrogen-doped multiwall carbon nanotube arrays have been successfully grown over large areas on quartz and silicon wafers by floating-catalyst chemical vapor deposition at low temperatures (600 degrees C). These nitrogen-including nanotubes, derived from pyridine-ferrocene mixtures, have smaller outer diameters but larger inner diameters compared with carbon nanotubes grown from a xylene-ferrocene mixture under similar conditions. The N-doped nanotubes exhibit bamboo-like structures in the core. Elemental analysis and electron energy loss spectroscopy analysis show that the as-prepared nanotubes contain as much as 2.62 wt.% N, with most of the N concentrated in the inner few shells of the nanotube. Such large-scale arrays of well-aligned N-doped nanotubes on silicon wafers have a current density as high as 23.8 mA/cm2 at an applied electric field of 17 V/micron, which can be further improved by patterning the tubes and coating the silicon substrate with a conductive thin metal film for the fabrication of flat panel displays.
Assuntos
Cristalização/métodos , Nanotecnologia/métodos , Nanotubos de Carbono/química , Nitrogênio/química , Condutividade Elétrica , Eletroquímica/métodos , Temperatura Alta , Substâncias Macromoleculares , Teste de Materiais/métodos , Conformação Molecular , Nanotubos de Carbono/isolamento & purificação , Quartzo/química , Silício/química , Propriedades de Superfície , TemperaturaRESUMO
Vertically aligned multi-walled carbon nanotube (MWCNT) arrays fabricated by xylene pyrolysis in anodized aluminum oxide (AAO) templates without the use of a catalyst were integrated into a resistive sensor design. Steady state sensitivities as high as 5% and 10% for 100 ppm of NH(3) and NO(2), respectively, at a flow rate of 750 sccm were observed. A thin layer of amorphous carbon (5-50 nm), formed on both sides of the template during xylene pyrolysis, was part of the sensor design. The thickness of the conducting amorphous carbon layers was found to play a crucial role in determining the sensitivity of the resistive sensor. A study was undertaken to elucidate (i) the dependence of sensitivity on the thickness of amorphous carbon layers, (ii) the effect of UV light on gas desorption characteristics and (iii) the dependence of room temperature sensitivity on different NH(3) flow rates. Variations in sensor resistance with exposure to oxidizing and reducing gases are explained on the basis of charge transfer between the analytes and the CNTs which were modeled as p-type semiconductors.
RESUMO
The measurement of Nitric oxide (NO) in real-time has been a major concern due to the involvement of this ubiquitous free radical modulator in several physiological and pathological pathways in tissues. Here we performed a study aiming at evaluating different types of carbon fibers, namely Textron, Amoco, Courtaulds and carbon nanotubes (University of Kentucky) covered with Nafion/o-phenylenediamine (o-PD) for NO measurement in terms of sensitivity, LOD, response time and selectivity against major potential interferents in the brain (ascorbate, nitrite and dopamine). The results indicate that, as compared with the other carbon fibers and nanotubes, Textron carbon fiber microelectrodes coated with two layers of Nafion and o-PD exhibited better characteristics for NO measurement as they are highly selective against ascorbate (>30,000:1), nitrite (>2000:1) and dopamine (>80:1). These coated Textron microelectrodes showed an average sensitivity of 341+/-120pA/microM and a detection limit of 16+/-11nM. The better performance of the Textron fibers is likely related to a stronger adhesion or more uniform coating of the Nafion and o-PD polymers to the fiber surface. In addition, the background current of the Textron carbon fibers is low, contributing to the excellent signal-to-noise for detection of NO.
Assuntos
Técnicas Biossensoriais/instrumentação , Encéfalo/metabolismo , Eletroquímica/instrumentação , Microeletrodos , Nanotecnologia/instrumentação , Nanotubos de Carbono/química , Óxido Nítrico/análise , Animais , Técnicas Biossensoriais/métodos , Desenho de Equipamento , Análise de Falha de Equipamento , Humanos , Nanotecnologia/métodos , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
Membranes composed of an array of aligned carbon nanotubes, functionalized with charged molecular tethers, show voltage gated control of ionic transport through the cores of carbon nanotubes. The functional density of tethered charge molecules is substantially increased by the use of electrochemical grafting of diazonium salts. Functionality can be forced to occur at the CNT tip entrances by fast fluid flow of an inert solvent through the core during electrochemical functionalization. The selectivity between Ru(bi-pyridine)(3)2+ and methyl viologen2+ flux is found to be as high as 23 with -130 mV bias applied to the membrane as the working electrode. Changes in the flux and selectivity support a model where charged tethered molecules at the tips are drawn into the CNT core at positive bias. For molecules grafted along the CNT core, negative bias extends the tethered molecules into the core. Electrostatically actuated tethers induce steric hindrance in the CNT core to mimic voltage gated ion channels in a robust large area platform.
Assuntos
Canais Iônicos/química , Membranas Artificiais , Modelos Químicos , Nanotubos de Carbono/química , Compostos de Diazônio , Eletroquímica , Microscopia Eletrônica de Varredura , Nanotubos de Carbono/ultraestrutura , Paraquat , RubídioRESUMO
Raman spectroscopy has been used to investigate ethane, propane, and SF6 interactions with an aligned multiwalled carbon nanotube (MWNT) membrane. Pressures of 7.5-9.3 atm and temperatures of 293-333 K were examined for propane and SF6, whereas slightly lower temperatures (263-293 K) and pressures (6.7-7.5 atm) were used for ethane. Red-shifting and broadening is seen for the C-C stretching vibrations of the two hydrocarbons, as well as for the A1g symmetric vibration (nu1) of SF6. These spectral features indicate that the interaction between the gas and the nanotube membrane is capable of perturbing molecular vibrations and creating red-shifted features. Control experiments done on polycrystalline graphite and a polystyrene blank indicate that this spectral behavior is unique to gases interacting with the nanotubes in the membrane.
RESUMO
Elliptically polarized light-scattering measurements were performed to investigate the dispersion behavior of multiwalled carbon nanotubes (MWNT). Xylene- and pyridine-derived MWNT powders were dispersed in water and ethanol in separate optic cells and allowed to sit undisturbed over a two-week time period after probe sonication. Continuous light-scattering measurements taken between scattering angles of 10-170 deg and repeated over several days showed that the nanotubes formed fractal-like networks. The pyridine-derived MWNTs showed greater dispersion variation over time, tending to aggregate and clump much faster than the xylene-derived tubes. The water suspensions appeared much more stable than the ethanol suspensions, which transformed into nonfractal morphology after a few hours. We relate the dispersion stability to size and fringe patterns on the outer surface of the nanotubes. Measured values of fractal dimension were distinctly lower than those in previous studies of single-walled carbon nanotubes. Profiles of both diagonal and off-diagonal scattering matrix elements are presented.
RESUMO
Chemical vapor deposition (CVD) is the most promising synthesis route for economically producing large quantities of carbon nanotubes. We have developed a low-cost CVD process for the continuous production of aligned multiwall carbon nanotubes (MWNTs). Here we report the effects of reactor temperature, reaction time, and carbon partial pressure on the yield, purity, and size of the MWNTs produced. A simple method for purifying and healing structural defects in the nanotubes is described. The dispersion of nanotubes in polymer matrices has been investigated as a means of deriving new and advanced engineering materials. These composite materials have been formed into fibers and thin films and their mechanical and electrical properties determined.
RESUMO
A new type of composite material based on carbon nanotubes and an aqueous sol-gel process has been developed. The electrochemical characteristics of these composites were investigated and compared to composites made with an alkoxy silane sol-gel process. The use of carbon nanotubes, as the conductive part of the composite, facilitated fast electron transfer rates. The feasibility of this type of composite for the development of biosensors was demonstrated using l-amino acid oxidase. The stability of the enzyme was increased when it was encapsulated in the aqueous sol-gel, and the sensor retained more that 50% of its response after 1 month of testing.
Assuntos
Técnicas Biossensoriais/métodos , Géis , Nanotubos de Carbono , Eletrodos , Estabilidade Enzimática , Enzimas/metabolismo , Microscopia Eletrônica de Varredura , Transição de Fase , Fenilalanina/análiseRESUMO
An array of aligned carbon nanotubes (CNTs) was incorporated across a polymer film to form a well-ordered nanoporous membrane structure. This membrane structure was confirmed by electron microscopy, anisotropic electrical conductivity, gas flow, and ionic transport studies. The measured nitrogen permeance was consistent with the flux calculated by Knudsen diffusion through nanometer-scale tubes of the observed microstructure. Data on Ru(NH3)6(3+) transport across the membrane in aqueous solution also indicated transport through aligned CNT cores of the observed microstructure. The lengths of the nanotubes within the polymer film were reduced by selective electrochemical oxidation, allowing for tunable pore lengths. Oxidative trimming processes resulted in carboxylate end groups that were readily functionalized at the entrance to each CNT inner core. Membranes with CNT tips that were functionalized with biotin showed a reduction in Ru(NH3)6(3+) flux by a factor of 15 when bound with streptavidin, thereby demonstrating the ability to gate molecular transport through CNT cores for potential applications in chemical separations and sensing.