Reduction in Offset Is Associated With Worse Functional Outcomes Following Total Hip Arthroplasty.

BACKGROUND: Conflicting reports exist about the effect of offset variation on functional outcomes following total hip arthroplasty. Reproducing native hip offset is thought to optimize function by restoring biomechanics and appropriately tensioning the hip abductor muscles. The aim of this study is to assess the effect of failing to restore global hip offset in comparison to the native contralateral hip. METHODS: A retrospective analysis of a prospective patient cohort was performed on patients undergoing an elective primary total hip arthroplasty. A total of 414 patients who had a minimum of 12 months of follow-up were included. Postoperative plain radiographs were analyzed for offset and compared to the contralateral native hip. Western Ontario and McMaster Universities Arthritis Index (WOMAC) and Veterans RAND 12 (VR-12) scores were assessed preoperatively and at 12 months postoperatively. RESULTS: Regression analyses indicated that a reduction in offset of >20 mm resulted in worse WOMAC pain (P = .005) and motion (P = .015) scores compared to those with maintained offset. WOMAC function (P = .063), global (P = .025), and VR-12 scores were not affected (physical P = .656; mental P = .815). Reduction in offset up to 20 mm and increased offset were not significantly associated with patient-reported outcome measures (P-values ranged from .102 to .995). CONCLUSION: This study demonstrated an association between reduction in offset by >20 mm and worse WOMAC pain and motion scores following total hip arthroplasty. Surgeons should avoid decreases in offset >20 mm in order to optimize functional outcomes.

Atypical femur fractures associated with bisphosphonate therapy: post-operative outcomes.

PURPOSE: Bisphosphonates are commonly used medication for the treatment of osteoporosis, and a well-established complication of this medication is bisphosphonate-associated atypical femur fractures (BAAFFs). The aim of this study was to assess the post-operative functional and radiographic outcomes of surgically treated BAAFFs. METHODS: An analysis of patients treated at a university-affiliated institution was performed. Patients who had undergone surgical fixation for a subtrochanteric or shaft of femur fracture which had been classified as atypical and treated with bisphosphonate therapy at the time of fracture were included. The outcome measures assessed included post-operative complications, length of stay, discharge destination, post-operative function, independence in activities of daily living (ADLs) and fracture union. RESULTS: Twenty patients were included in this study with a mean age of 75.2 years. The cohort was predominantly female. The average duration of bisphosphonate therapy was 7.35 years. Nine patients had contralateral bisphosphonate-related stress reactions at the time of their initial fracture and underwent prophylactic surgical intervention. The majority of patients received cephalomedullary nail fixation (95%) with more than half (65.0%) of the cohort experiencing one or more post-operative complications. The median length of stay was 6.5 days and 50% of the cohort required inpatient rehabilitation. At final review, independent mobilisation was recorded in only 10.0% of patients, and 70% of patients were dependent with their ADLs at their latest follow-up. Average follow-up was 8 months, and only six cases demonstrated union at the six-month review, with delayed union between 9 and 12 months being common. CONCLUSION: Patients with BAAFFs experience high rates of complications, record poor post-operative functional outcomes, and demonstrate a delayed time to union. Nearly half of our cohort had radiographic evidence of bilateral pathology.

Radiolucent line assessment in cemented stemmed total knee (RISK) arthroplasty: validation of a modernized classification system.

BACKGROUND: This study aims to implement and assess the inter- and intra-reliability of a modernized radiolucency assessment system; the Radiolucency In cemented Stemmed Knee (RISK) arthroplasty classification. Furthermore, we assessed the distribution of regions affected by radiolucency in patients undergoing stemmed cemented total knee arthroplasty. METHODS: Stemmed total knee arthroplasty cases over 7-year period at a single institution were retrospectively identified and reviewed. The RISK classification system identifies five zones in the femur and five zones in the tibia in both the anteroposterior (AP) and lateral planes. Post-operative and follow-up radiographs were scored for radiolucency by four blinded reviewers at two distinct time points four weeks apart. Reliability was assessed using the kappa statistic. A heat map was generated to demonstrate the reported regions of radiolucency. RESULTS: 29 cases (63 radiographs) of stemmed total knee arthroplasty were examined radiographically using the RISK classification system. Intra-reliability (0.83) and Inter-reliability (0.80) scores were both consistent with a strong level of agreement using the kappa scoring system. Radiolucency was more commonly associated with the tibial component (76.6%) compared to the femoral component (23.3%), and the tibial anterior-posterior (AP) region 1 (medial plateau) was the most affected (14.9%). CONCLUSION: The RISK classification system is a reliable assessment tool for evaluating radiolucency around stemmed total knee arthroplasty using defined zones on both AP and lateral radiographs. Zones of radiolucency identified in this study may be relevant to implant survival and corresponded well with zones of fixation, which may help inform future research.

Smaller Gap Formation With Suture Anchor Fixation Than Traditional Transpatellar Sutures in Patella and Quadriceps Tendon Rupture: A Systematic Review.

PURPOSE: The purpose of this study is to compare the biomechanical properties between traditional transosseous tunnel and suture anchor technique repair for extensor mechanism ruptures and assess for differences in the mechanism of failure of both techniques. METHODS: A multi-database search (PubMed, EMBASE, and Medline) was performed according to PRISMA guidelines on November 14, 2021. All articles comparing biomechanical properties of transpatellar and suture anchor technique for extensor mechanism ruptures were included. Abstracts, reviews, case reports, studies without biomechanical analysis, conference proceedings, and non-English language studies were excluded. Outcomes pursued included gap formation, load to failure, and mechanism of failure. Relevant data from studies meeting inclusion criteria were extracted and analyzed. Study methodology was assessed using the Methodological Index for Non-Randomized Studies score. RESULTS: A total of 212 knees were biomechanically assessed, including 98 patella and 114 quadricep tendon ruptures. Five patellar tendon studies were included, and all of them reported significantly smaller gap formation in suture anchor group. Gap formation for suture anchors ranged from .9 mm to 4.1 mm, while that of transpatellar group ranged from 2.9 mm to 10.3 mm. One study reported a significantly higher load to failure in the suture anchor group, while the remaining four studies reported no significant difference. Load to failure for suture anchor ranged from 259 N to 779 N, while that of the transpatellar group ranged from 287 N to 763 N. The most common mechanism of failure was anchor pullout in suture anchor and knot failure in the transpatellar group. Five quadriceps tendon studies were included, and three studies reported statistically significant smaller gap formation in the suture anchor group. Gap formation for suture anchor ranged from 1.5 mm to 5.0 mm, while that of transpatellar group ranged from 3.1 mm to 33.3 mm. Two studies reported a significantly higher load to failure in the suture anchor group, while one study reported a higher load to failure in the transpatellar repair group. Load to failure for suture anchor ranged from 286 N to 740 N, while that of transpatellar group ranged from 251 N to 691 N. The most common mechanism of failure was suture failure in the suture anchor and knot failure in the transpatellar group. CONCLUSION: Suture anchor fixation displays a better biomechanical profile than traditional transpatellar techniques in terms of smaller gap formations in the repair of both patella and quadriceps tendon injuries. Anchor pullout in suture anchor fixation was present mainly with the use of titanium anchors. CLINICAL RELEVANCE: These findings above may result in better retention of tendon approximation in patella and quadriceps tendon fixation postoperatively, which may result in earlier recovery. Further randomized controlled clinical trials to compare these techniques are required.

Low grade of radiographic osteoarthritis predicts unsatisfactory response of the contralateral knee replacement in two-stage bilateral total knee arthroplasty.

PURPOSE: It is difficult to counsel patients with bilateral osteoarthritis who are unsatisfied with their first knee replacement as to whether they are likely to have a better outcome after the contralateral knee is replaced. The purpose of this study was to determine whether predictive factors can be found to prognosticate outcome of the second-side knee replacement when a patient has an unsatisfactory response to the first, with the hypothesis that predictors, such as prosthetic factors and radiographic level of osteoarthritis, may be able to predict a satisfactory response to the contralateral knee replacement. MATERIALS AND METHODS: An analysis of staged bilateral knee replacements performed at a tertiary arthroplasty centre from 2012 to 2018 was undertaken. A total of 550 knee replacements in 275 patients were included in this study. The primary variable measured was the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score. Satisfactory response to surgery was defined as a WOMAC score improved by 17 points or more, and 56 or greater. Patients who did not achieve a satisfactory response with their first knee replacement were further analysed for predictive factors (age, sex, pre-operative score, mental score, socioeconomic status, type of prosthesis, use of navigation, patella resurfacing and radiographic osteoarthritis) of an unsatisfactory response for their contralateral knee replacement. RESULTS: Overall, 44 (16%) patients failed to achieve a satisfactory response from both their first and contralateral knee replacements. The factor most predictive of an unsatisfactory response to their first knee replacement was pre-operative mental health score. However, in patients who did not achieve a satisfactory response with their first knee replacement, radiographic osteoarthritis, as measured by the Kellgren-Lawrence (KL) score was the main predictor of satisfactory response for their contralateral knee replacement. Only patients with KL grade 4 osteoarthritis were likely to have a satisfactory response with their contralateral knee replacements (KL4 versus KL3, Odds ratio 3.57 (CI 1.26-10.03) p = 0.016*). Patients with KL grade 3 osteoarthritis were unlikely to have a satisfactory response, and in this series, no patient with KL grade 2 osteoarthritis had a satisfactory response. CONCLUSION: In a patient who has an unsatisfactory response to their first knee replacement, the best predictor of achieving a satisfactory response to his/her contralateral knee replacement is the level of radiographic osteoarthritis in that knee. LEVEL OF EVIDENCE: IV: Retrospective Cohort study.

Cemented Polished Tapered Stems Have Lower Revision Rates Than Commonly Used Cementless Implant up to 17 Years of Follow-Up: An Analysis of 201,889 Total Hip Replacements From the Australian Orthopedic Association National Joint Replacement Registry.

BACKGROUND: Data assessing femoral stems may be influenced by grouping together matt and polished stems, despite their differing reported survivorship. The aim of this study is to assess the difference in revision rates between commonly used cemented and cementless stems when polished tapered stems are assessed independently of matt stems. METHODS: Australian Orthopaedic Association National Joint Replacement Registry data from 1999 to 2019 were used to assess difference in revision rates between the 5 most commonly implanted femoral cemented and cementless stems for osteoarthritis. Cemented matt femoral stems, stems using line-to-line cementing techniques and procedures using non-cross-linked polyethylene, large head (>32 mm) metal-on-metal bearing surfaces or exchangeable necks were excluded. Cumulative percent revision was used to help compare survivorship between stems. RESULTS: There were 201,889 total hip replacements meeting the inclusion criteria, of which 50.0% were cemented and 50.0% cementless. Cemented stems had a lower rate of revision at all time points compared to cementless stems. This was most significant during the first 2 weeks (hazard ratio 0.48, 95% confidence interval 0.40-0.58, P < .001) compared to 2 weeks postoperatively and onwards (hazard ratio 0.85, 95% confidence interval 0.81-0.90, P < .001). A subanalysis of head size, bearing type, and surgeon volume further supported the use of a cemented stem. CONCLUSION: Commonly used cemented polished tapered stems have a lower revision rate when compared to commonly used cementless prostheses, and are recommended in all age groups for both low-volume and high-volume surgeons especially when head size 32 mm or smaller is used.

Patterns and Predictors of Outpatient Antibiotic Dispensation Following Total Hip and Knee Arthroplasty.

BACKGROUND: This study aimed to evaluate the month-to-month prevalence of antibiotic dispensation in the 12 months before and after total knee arthroplasty (TKA) and total hip arthroplasty (THA) and to identify factors associated with antibiotic dispensation in the month immediately following the surgical procedure. METHODS: In total, 4,115 THAs and TKAs performed between April 2013 and June 2019 from a state-wide arthroplasty referral center were analyzed. A cross-sectional study used data from an institutional arthroplasty registry, which was linked probabilistically to administrative dispensing data from the Australian Pharmaceutical Benefits Scheme. Multivariable logistic regression was carried out to identify patient and surgical risk factors for oral antibiotic dispensation. RESULTS: Oral antibiotics were dispensed in 18.3% of patients following primary TKA and 12.0% of patients following THA in the 30 days following discharge. During the year after discharge, 66.7% of TKA patients and 58.2% of THA patients were dispensed an antibiotic at some point. Patients with poor preoperative health status were more likely to have antibiotics dispensed in the month following THA or TKA. Older age, undergoing TKA rather than THA, obesity, inflammatory arthritis, and experiencing an in-hospital wound-related or other infectious complications were associated with increased antibiotic dispensation in the 30 days following discharge. CONCLUSION: A high rate of antibiotic dispensation in the 30 days following THA and TKA has been observed. Although resource constraints may limit routine wound review for all patients by a surgeon, a select cohort may benefit from timely specialist review postoperatively. Several risk factors identified in this study may aid in identifying appropriate candidates for such changes to follow-up care.

Tibio-Talar-Calcaneal Nail Fixation for Ankle Fractures: A Systematic Review and Meta-Analysis.

Unstable ankle fractures are traditionally treated with open reduction and internal fixation. An alternative surgical option is primary tibio-talar-calcaneal fusion. Our aims were to determine the indication, complication rates, and functional outcomes, of tibio-talar-calcaneal nailing when used as the primary treatment of ankle fractures. A multidatabase literature search was performed on December 14, 2019 according to PRISMA guidelines. All studies in the English language reporting complications and outcomes involving tibio-talar-calcaneal nailing for primary treatment of ankle fractures were included. Ten studies with 252 ankle fractures were included. Mean age of patients was 75.5 (32-101) years. Mean follow-up duration was 79 weeks (36-104 weeks). Surgical site infection occurred in 11.2% (95% confidence interval [CI] 6.3%-19%) of patients, implant failure occurred in 8.1% (95% CI 5%-12.8%) of patients, and unplanned return to operating room occurred in 10.1% (95% CI 6.1%-16.2%) of patients. There were no cases of wound dehiscence. All-cause mortality rate at the end of follow-up was 26.6% (95% CI 19.7%-34.9%). Average reduction in Olerud-Molander Ankle Score after surgery was 7.9 points (5.0-11.8). Eighty-one point five percent (95% CI: 67.4%-90.4%) of patients were able to return to similar preoperative mobility aid after surgery. Tibio-talar-calcaneal nailing is an alternative procedure for patients who have sustained fractures unsuitable for nonoperative management, but have low functional demands and at increased risks of complications after open reduction and internal fixation. About 81.5% (95% CI 67.4%-90.4%) of patients were able to return to a similar preinjury mobility status after tibio-talar-calcaneal nailing.

Comparable dislocation and revision rates for patients undergoing total hip arthroplasty with subsequent or prior lumbar spinal fusion: a meta-analysis and systematic review.

BACKGROUND: There is a known correlation between the procedures of lumbar spinal fusion (LSF), total hip arthroplasty (THA) and the complication of hip dislocation and revision occurring in patients. However there is no consensus as to whether the risk of this complication is higher if THA is performed before or after LSF. This meta-analysis aims to determine the influence of surgical sequence of lumbar spinal fusion and total hip arthroplasty on the rates of hip dislocation and revisions. METHODS: A meta-analysis was conducted with a multi-database search (PubMed, OVID, EMBASE, Medline) according to PRISMA guidelines on 27th May 2020. Data from all published literature meeting inclusion criteria were extracted and analyzed with an inverse variance statistical model. FINDINGS: A total of 25,558 subsequent LSF and 43,880 prior LSF THA patients were included in this study. There was no statistically significant difference in all-cause revisions (OR = 0.86, 95%CI: 0.48-1.54, p = 0.61), dislocation (OR = 0.82, 95%CI: 0.25-2.72, p = 0.75) or aseptic loosening (OR = 1.14, 95%CI: 0.94-1.38, p = 0.17) when comparing patients receiving LSF subsequent versus prior to THA. CONCLUSION: Lumbar spinal fusion remains a risk factor for dislocation and revision of total hip arthroplasties regardless of whether it is performed prior to or after THA. Further preoperative assessment and altered surgical technique may be required in patients having THA who have previously undergone or are likely to undergo LSF in the future. EVIDENCE LEVEL: Level II, Meta-analysis of homogeneous studies.

Stainless Steel Femoral Heads Reduce Rate of Revision When Compared to Ion-Implanted Chromium-Cobalt Heads With a Single Cemented Femoral Design: An Analysis of 40,468 Total Hip Replacements From the Australian Orthopedic Association National Joint Replacement Registry.

BACKGROUND: In order to reduce the incidence of total hip joint replacement revision for wear, multiple advanced materials and alloys targeting hip replacement tribology have been introduced. Ion implantation of chromium-cobalt heads is thought to reduce wear due to increased surface hardness and lower friction. These advances in technology result in additional manufacturing costs. However, it is unclear whether these attributes result in a decreased rate of revision for wear and when used with modern highly crosslinked polyethylene (XLPE). The aim of this study is to compare the survivorship of stainless steel and ion-implanted chromium-cobalt femoral heads in order to determine whether ion implantation has a lower risk of revision. METHODS: Data from the Australian Orthopedic Association National Joint Replacement Registry included all stainless steel and low-friction ion-treated (LFIT) femoral heads used in conjunction with a primary Exeter/Trident hip replacement combination and XLPE liners performed for osteoarthritis. Kaplan-Meier estimates of survivorship were used to describe the time to first revision. Hazard ratios (HRs) from Cox proportional hazard models, with adjustment for age and gender, were used to compare revision rates between the 2 groups. RESULTS: There were 40,468 total hip replacements that met the inclusion criteria. Stainless steel heads had a lower revision rate compared to LFIT chromium-cobalt heads (HR 0.87, 95% confidence interval 0.76-1.00, P = .048). The difference in the rate of revision was even greater when 32-mm heads were used (HR 0.72, 95% confidence interval 0.58-0.89, P = .002). There was no difference in revision for loosening between head alloys or when stratified by age. CONCLUSION: Given the increased costs associated with LFIT implants and the lower rate of revision for stainless steel heads, we recommend the use of a stainless steel heads when using an Exeter/Trident hybrid hip with an XLPE liner.

Clinical outcomes and complication profile of total hip arthroplasty after lumbar spine fusion: a meta-analysis and systematic review.

BACKGROUND: Hip and spine pathology can alter the biomechanics of spino-pelvic mobility. Lumbar spine fusions can reduce the mobility of the lumbar spine and therefore result in compensatory femoral motion, contributing towards dislocations of THA. PURPOSE: This meta-analysis aims to determine the effect of pre-existing spine fusions on THA outcomes, and complication profile including hip dislocations, all-cause revisions and all complications. METHODS: A multi-database search was performed according to PRISMA guidelines. All studies that compared patients who underwent THA with and without prior SF were included in the analysis. RESULTS: Ten studies were included in this review, consisting of 28,396 SF THA patients and 1,550,291 non-SF THA patients. There were statistically significant higher rates of hip dislocation (OR 2.20, 95% CI 1.71-2.85, p < 0.001), all-cause revision (OR 3.43, 95% CI 1.96-6.00, p < 0.001) and all complications (OR 2.83, 95% CI 1.28-6.24, p = 0.01) in SF than in non-SF THA patients. When registry data were excluded, these rates were approximately doubled. Subgroup analysis of revisions for dislocations was not statistically significant (OR 5.28, 95% CI 0.76-36.87, p = 0.09). While no meta-analysis was performed on clinical outcomes due to heterogeneous parameter reporting, individual studies reported significantly poorer outcomes in SF patients than in non-SF patients. CONCLUSION: THA patients with SF are at higher risks of hip dislocations, all-cause revisions and all complications, which may adversely affect patient-reported outcomes. Surgeons should be aware of these risks and appropriately plan to account for altered spino-pelvic biomechanics, in order to reduce the risks of hip dislocations and other complications. LEVEL OF EVIDENCE: II (Meta-analysis of non-homogeneous studies). These slides can be retrieved under Electronic Supplementary Material.

Knee Arthroplasty Component Malrotation Does Not Affect Function or Quality of Life in the Short to Medium Term.

BACKGROUND: Component rotation in total knee arthroplasty is thought to affect patella tracking, flexion gap, and balancing and hence is hypothesized to affect function, pain, and longevity. Few studies have directly correlated post-operative component rotation to function and quality of life in the short to medium term post-operatively, with findings in the current literature conflicting. METHODS: A retrospective study of prospectively collected data was used to determine the effect of femoral, tibial, and combined component rotation in primary total knee arthroplasty with primary outcomes being function as measured by the Knee Society Score, pain and quality of life as measured by the Short-Form 12 score, and secondary outcome being prosthesis failure. Malrotation was defined using the current literature as being internally rotated from neutral, or externally rotated greater than 5° for the femoral component, internally rotated greater than 6° for the tibial component, or internally rotated from neutral for the 2 components combined. RESULTS: No clinically relevant correlation between function or quality of life and component rotation could be found at 5 years. However, it was noted that those patients with combined component malrotation (femoral rotation added to tibial rotation resulting in overall component internal rotation) improved less in overall pain scores than those that were not malrotated. CONCLUSION: In the mid-term, component malrotation may result in a decreased level of improvement from pain compared to pre-operative results. However, component malrotation does not make a significant difference to function or quality of life. LEVEL OF EVIDENCE: Level III: Therapeutic Study.

Assessment of Shoulder Range of Motion Using a Wireless Inertial Motion Capture Device-A Validation Study.

(1) Background: Measuring joint range of motion has traditionally occurred with a universal goniometer or expensive laboratory based kinematic analysis systems. Technological advances in wearable inertial measurement units (IMU) enables limb motion to be measured with a small portable electronic device. This paper aims to validate an IMU, the 'Biokin', for measuring shoulder range of motion in healthy adults; (2) Methods: Thirty participants completed four shoulder movements (forward flexion, abduction, and internal and external rotation) on each shoulder. Each movement was assessed with a goniometer and the IMU by two testers independently. The extent of agreement between each tester's goniometer and IMU measurements was assessed with intra-class correlation coefficients (ICC) and Bland-Altman 95% limits of agreement (LOA). Secondary analysis compared agreement between tester's goniometer or IMU measurements (inter-rater reliability) using ICC's and LOA; (3) Results: Goniometer and IMU measurements for all movements showed high levels of agreement when taken by the same tester; ICCs > 0.90 and LOAs < ±5 degrees. Inter-rater reliability was lower; ICCs ranged between 0.71 to 0.89 and LOAs were outside a prior defined acceptable LOAs (i.e., > ±5 degrees); (4) Conclusions: The current study provides preliminary evidence of the concurrent validity of the Biokin IMU for assessing shoulder movements, but only when a single tester took measurements. Further testing of the Biokin's psychometric properties is required before it can be confidently used in routine clinical practice and research settings.

Gap Balancing Sacrifices Joint-Line Maintenance to Improve Gap Symmetry: 5-Year Follow-Up of a Randomized Controlled Trial.

BACKGROUND: Gap balancing (GB) has been noted to sacrifice joint-line maintenance to improve gap symmetry. This study aims to determine whether this change affects function or quality of life in the midterm. METHODS: A prospective blinded randomized controlled trial was completed with 103 patients randomized to measured resection (n = 52) or GB (n = 51). Primary outcome measured was femoral component rotation. Secondary outcomes measured were joint-line change, gap symmetry, and function and quality-of-life outcomes. RESULTS: At 5 years, 83 of 103 patients (85%) were assessed. There was no significant difference between groups in terms of functional or quality of life outcomes. A subgroup analysis revealed that there was no significant association between those with asymmetrical flexion and/or extension or medial and/or lateral gaps during knee replacement and subsequent functional outcomes. No significant difference was detected with those with an elevated joint line and postoperative function. CONCLUSION: In the midterm, the resultant change in joint-line and maintained gap symmetry noted with GB does not result in significant change to function or quality of life.

Extension Casting For Both-Bone Forearm Fractures In Children.

Paediatric forearm fractures are commonly treated with closed reduction and cast immobilization. Determining the best way to cast these fractures during the initial presentation may prevent the need for re-manipulation . An analysis of casting technique for all patients under eighteen years of age treated with closed reduction and cast immobilization for both-bone fractures of the forearm at a regional tertiary referral hospital over 7 years was undertaken. One-hundred and eighty-nine consecutive patients with 207 fractures were reviewed. No significant association was found between casting technique and failure rates (p=0.124). However, if manipulation and plaster was performed by a trainee, failure rates were significantly reduced when extension casting was utilized (p=0.029). Closed reduction and cast immobilization with the elbow in an extended position is an effective treatment option for both-bone forearm fractures in a paediatric population and is a safer option when performed by more junior staff-members.

Gap balancing sacrifices joint-line maintenance to improve gap symmetry: a randomized controlled trial comparing gap balancing and measured resection.

A total knee arthroplasty can be completed using two techniques; measured resection or gap balancing. A prospective blinded randomized controlled trial was completed with 103 patients randomized to measured resection (n = 52) or gap balancing (n = 51). Primary outcome measure was femoral component rotation. Secondary outcome measures were joint-line change, gap symmetry and function and quality-of-life outcomes. Gap balancing resulted in a significantly raised joint-line compared to measured resection. Gap symmetry was significantly better using gap balancing. Functional outcomes and quality-of-life were not significantly different at 24 months. Using computer navigation, gap balancing significantly raises the joint-line in order to improve gap symmetry. This does not result in a clinical difference in function or quality of life at 24 months.

Triangular fibrocartilage complex injury: outcomes of operative and non-operative management.

OBJECTIVE: The prevalence TFCC injuries has increased over time. However, there remains a lack of understanding of its natural history. Along with the paucity of evidence on treatment options, there is lack of consensus on how best to manage them. This is a retrospective study with subgroup cohort analysis, examining variables and management options associated with patient-reported disability and pain. METHODS: Patients from a metropolitan health network who have been referred for Magnetic Resonance Imaging (MRI) of the wrist between 2010 and 2019 and identified to have TFCC injury, were followed up to determine patient-reported outcomes. Disability of arm shoulder and hand scores (DASH) and visual assessment pain scale (VAS) were used to measure disability and pain respectively. An 'excellent' DASH and VAS scores were defined as ≤10 and ≤2, respectively. RESULTS: One hundred and twenty-four patients met the inclusion criteria and consented to participate in this study. There were 53 patients with excellent DASH score, 95 excellent VAS score and 51 excellent outcomes at mean follow-up of 75.5 months (Range: 5-402.8 months). Concomitant pathology and surgical management were less likely to have excellent DASH and VAS scores, while traumatic aetiology and smoking were less likely to have excellent VAS score. Age was not predictive of excellent DASH or VAS score. CONCLUSIONS: Surgical management of TFCC injuries were associated with worse outcomes than if they were left alone. Smoking cessation is a patient-modifiable risk factor that may help improve outcomes.