Continuous-wave operation in directly patterned perovskite distributed feedback light source at room temperature.

We report a directly patterned perovskite distributed feedback (DFB) resonator and show narrow amplified spontaneous emission (ASE) at pump powers as low as 0.1 W/cm2 under continuous-wave (CW) optical pumping conditions at room temperature. Compared to the pristine thin film photoluminescence spectrum, a 16-fold reduction in emission linewidth in the MAPbI3 DFB cavity was observed. The direct nanostructuring of perovskites was achieved by thermal nanoimprint lithography. Our findings pave the way toward realizing CW pumped perovskite lasers at room temperature and energy-efficient perovskite light sources.

Nanoimprinted perovskite metasurface for enhanced photoluminescence.

Recently, solution-processed hybrid halide perovskite has emerged as promising materials for advanced optoelectronic devices such as photovoltaics, photodetectors, light emitting diodes and lasers. In the mean time, all-dielectric metasurfaces with high-index materials have attracted attention due to their low-loss and high-efficient optical resonances. Because of its tunable by composition band gap in the visible frequencies, organolead halide perovskite could serve as a powerful platform for realizing high-index, low-loss metasurfaces. However, direct patterning of perovskite by lithography-based technique is not feasible due to material instability under moisture. Here we report novel organolead halide perovskite metasurfaces created by the cost-effective thermal nanoimprint technology. The nanoimprinted perovskite metasurface showed improved surface morphology and enhanced optical absorption properties. Significantly enhanced optical emission with an eight-fold enhancement in photoluminescence (PL) intensity was observed under room temperature. Temperature-dependent PL of perovskite nanograting metasurface was also investigated. Based on our results, we believe that thermal nanoimprint is a simple and cost-effective technique to fabricate perovskite-based metasurfaces, which could have broad impact on optoelectronic and photonic applications.

Nanoimprinted Perovskite Nanograting Photodetector with Improved Efficiency.

Recently, organolead halide-based perovskites have emerged as promising materials for optoelectronic applications, particularly for photovoltaics, photodetectors, and lasing, with low cost and high performance. Meanwhile, nanoscale photodetectors have attracted tremendous attention toward realizing miniaturized optoelectronic systems, as they offer high sensitivity, ultrafast response, and the capability to detect beyond the diffraction limit. Here we report high-performance nanoscale-patterned perovskite photodetectors implemented by nanoimprint lithography (NIL). The spin-coated lead methylammonium triiodide perovskite shows improved crystallinity and optical properties after NIL. The nanoimprinted metal-semiconductor-metal photodetectors demonstrate significantly improved performance compared to the nonimprinted conventional thin-film devices. The effects of NIL pattern geometries on the optoelectronic characteristics were studied, and the nanograting pattern based photodetectors demonstrated the best performance, showing approximately 35 times improvement on responsivity and 7 times improvement on on/off ratio compared with the nonimprinted devices. The high performance of NIL-nanograting photodetectors likely results from high crystallinity and favored nanostructure morphology, which contribute to higher mobility, longer diffusion length, and better photon absorption. Our results have demonstrated that the NIL is a cost-effective method to fabricate high-performance perovskite nanoscale optoelectronic devices, which may be suitable for manufacturing of high-density perovskite nanophotodetector arrays and to provide integration with state-of-the-art electronic circuits.