Iridium-Catalyzed C-H Borylations: Regioselective Functionalizations of Calix[4]arene Macrocycles.

We report iridium-catalyzed C-H borylations for the regioselective synthesis of distally disubstituted calix[4]arene macrocycles. The atom- and step-economical method led to a broad family of calix[4]arenes in good yields and functional group tolerance. The synthetic utility of the C-H borylation protocol was finally illustrated with several late-stage modifications for the synthesis of elaborate calix[4]arenes frameworks, otherwise challenging to achieve with commonly employed procedures.

Iron-Catalyzed C-H Alkylation/Ring Opening with Vinylbenzofurans Enabled by Triazoles.

We report an unprecedented iron-catalyzed C-H annulation using readily available 2-vinylbenzofurans as the reaction pattern. The redox-neutral strategy, based on cheap, non-toxic, and earth-abundant iron catalysts, exploits triazole assistance to promote a cascade C-H alkylation, benzofuran ring-opening and insertion into a Fe-N bond, to form highly functionalized isoquinolones. Detailed mechanistic studies supported by DFT calculations fully disclosed the manifold of the iron catalysis.

A Combined Solution and Solid-State Study on the Tautomerism of an Azocalix[4]arene Chromoionophore.

Azocalixarenes functionalized with cation binding sites are popular chromoionophores due to the ease of synthesis and the large complexation-induced shifts of their absorption band that originate from an azo-phenol-quinone-hydrazone tautomerism. Despite their extensive use, however, a thorough investigation of the structure of their metal complexes has not been reported. We describe herein the synthesis of a new azocalixarene ligand (2) and the study of its complexation properties with the Ca2+ cation. Through a combination of solution (1H NMR and UV-vis spectroscopies) and solid-state (X-ray diffractometry) techniques, we demonstrate that metal complexation induces a shift of the tautomeric equilibration towards the quinone-hydrazone form, while deprotonation of the complex results in the reversion to the azo-phenol tautomer.

Diametric calix[6]arene gold(I) catalysts for intramolecular cyclopropanations of 1,6-dienynes.

We report a solid-state structural investigation of diametric calix[6]arene-based phosphine gold(I) cavitands which are characterised by two specific, different 1,2,3-alternate conformations in solution and in the solid state. The effect of the specific orientation of phosphines, with respect to macrocycles, was studied in intramolecular cyclopropanation of 1,6-dienynes. The general applicability of these catalysts was disclosed, delivering a family of polycycles with high yields and functional group tolerance.

Characterization and Structural Insights of the Reaction Products by Direct Leaching of the Noble Metals Au, Pd and Cu with N,N'-Dimethyl-piperazine-2,3-dithione/I2 Mixtures.

In the context of new efficient and safe leaching agents for noble metals, this paper describes the capability of the Me2pipdt/I2 mixture (where Me2pipdt = N,N'-dimethyl-piperazine-2,3-dithione) in organic solutions to quantitatively dissolve Au, Pd, and Cu metal powders in mild conditions (room temperature and pressure) and short times (within 1 h in the reported conditions). A focus on the structural insights of the obtained coordination compounds is shown, namely [AuI2(Me2pipdt)]I3 (1), [Pd(Me2pipdt)2]I2 (2a) and [Cu(Me2pipdt)2]I3 (3), where the metals are found, respectively, in 3+, 2+ and 1+ oxidation states, and of [Cu(Me2pipdt)2]BF4 (4) and [Cu(Me2dazdt)2]I3 (5) (Me2dazdt = N,N'-dimethyl-perhydrodizepine-2,3-dithione) compared with 3. Au(III) and Pd(II) (d8 configuration) form square-planar complexes, whereas Cu(I) (d10) forms tetrahedral complexes. Density functional theory calculations performed on the cationic species of 1-5 help to highlight the nature of the bonding in the different complexes. Finally, the valorization of the noble metals-rich leachates is assessed. Specifically, gold metal is quantitatively recovered from the solution besides the ligands, showing the potential of these systems to promote metal recycling processes.

Deciphering the Supramolecular Organization of Multiple Guests Inside a Microporous MOF to Understand their Release Profile.

Metal-organic frameworks (MOFs) give the opportunity of confining guest molecules into their pores even by a post-synthetic protocol. PUM168 is a Zn-based MOF characterized by microporous cavities that allows the encapsulation of a significant number of guest molecules. The pores engineered with different binding sites show a remarkable guest affinity towards a series of natural essential oils components, such as eugenol, thymol and carvacrol, relevant for environmental applications. Exploiting single crystal X-ray diffraction, it was possible to step-wisely monitor the rather complex three-components guest exchange process involving dimethylformamide (DMF, the pristine solvent) and binary mixtures of the flavoring agents. A picture of the structural evolution of the DMF-to-guest replacement occurring inside the MOF crystal was reached by a detailed single-crystal-to-single-crystal monitoring. The relation of the supramolecular arrangement in the pores with selective guests release was then investigated as a function of time and temperature by static headspace GC-MS analysis.

Supramolecular Assemblies in Silver Complexes: Phase Transitions and the Role of the Halogen Bond.

Weak interactions (hydrogen bonds, halogen bonds, CH···π and π-π stacking) can play a significant role in the formation of supramolecular assemblies with desired structural features. In this contribution, we report a systematic investigation on how a halogen bond (XB) can modulate the structural arrangement of silver supramolecular complexes. The complexes are composed of X-phenyl(bispyrazolyl)methane (X = Br, I) and I-alkynophenyl(bispyrazolyl)methane ligands functionalized in meta (L3Br, L3I) and para (L4Br, L4I, L4CCI) positions on a phenyl ring with the purpose of providing different directionalities of the X function with respect to the N,N coordination system. The obtained [Ag(L)2]+ moieties show remarkable geometric similarities, and the L4Br, L4I, and L4CCI ligands exhibit the most conserved types of supramolecular arrangement that are sustained by XB. The increased σ-hole in L4CCI with respect to L4I leads to an occurrence of short (and strong) XB interactions with the anions. [Ag(L4I)2]PF6 and [Ag(L4I)2]CF3SO3 are characterized by the presence of three different phases, and the single-crystal evolution from phase-1 (a honeycomb structure with large 1D cavities) to phase-3 (solventless) occurs by a stepwise decrease in the crystallization solvent content, which promotes an increase in XB interactions in the lattice. The present paper aims to provide useful tools for the selection of appropriate components for the use of coordination compounds to build supramolecular systems based on the halogen bond.

Trisulfonamide calix[6]arene-catalysed Michael addition to nitroalkenes.

We describe the application of a novel family of trisulfonamide (TSA) calix[6]arenes in general acid catalysis. Hydrogen-bonding interactions between acidic TSA and methanol boosted the reactivity of the Michael addition of indoles to nitroalkene derivatives. The transformation occurs at a low catalyst loading of 5 mol%, allowing for the synthesis of nitroalkanes with good yields and functional group tolerance.

Stepwise Evolution of Molecular Nanoaggregates Inside the Pores of a Highly Flexible Metal-Organic Framework.

The crystalline sponge method (CSM) is primarily used for structural determination by single-crystal X-ray diffraction of a single analyte encapsulated inside a porous MOF. As the host-guest systems often show severe disorder, reliable crystallographic determination is demanding; thus the dynamics of the guest entering and the formation of nanoconfined molecular aggregates has not been in the spotlight. Now, the concept is investigated of the CSM for monitoring the structural evolution of nanoconfined supramolecular aggregates of eugenol guests with displacement of DMF inside the cavities of the flexible MOF, PUM168. The interpretation of the electron density provides a series of unique detailed snapshots depicting the supramolecular guest aggregation, thus showing the tight interplay between the host flexible skeleton and the molecular guests through the DMF-to-eugenol exchange process.

Visible-Light-Promoted Polycyclizations of Dienynes.

A variety of linear dienynes can deliver complex tetracyclic frameworks in the presence of an IrIII complex and visible light. Product formation involves the generation of four new C-C bonds and six contiguous stereocenters, which decorate two [3.1.0] bicyclic units tethered through their bridging quaternary carbon atoms. The internal alkyne acts as a formal dicarbenoid for the generation of two cyclopropanes in these radical cation cascades. This behavior has not been previously observed for organic reactive intermediates and can be extended to intermolecular reactions and diendiynes.

Heterogenization of a [NiFe] Hydrogenase Mimic through Simple and Efficient Encapsulation into a Mesoporous MOF.

In the quest for new, efficient, and noble-metal-free H2-evolution catalysts, hydrogenase enzymes are a source of inspiration. Here, we describe the development of a new hybrid material based on a structural and functional [NiFe]-hydrogenase model complex (NiFe) incorporated into the Zr-based MOF PCN-777. The bulk NiFe@PCN-777 material was synthesized by simple encapsulation. Characterization by solid-state NMR and IR spectroscopy, SEM-EDX, ICP-OES, and gas adsorption confirmed the inclusion of the guest. FTO-supported thin films of the NiFe@PCN-777 composite were obtained by electrophoretic deposition of the bulk material and characterized by SEM-EDX, ICP-OES, and cyclic voltammetry. The average surface concentration of electroactive NiFe catalyst in the film was found to be ∼9.6 × 10-10 mol cm-2, implying that a surprisingly high fraction (37%) of NiFe units incorporated in the MOF are electroactive. By cyclic voltammetry, we showed that NiFe maintains its electrocatalytic capabilities for H+ reduction inside the MOF cavities, even if under controlled-potential electrolysis conditions the activity of NiFe cannot be discerned from that of free PCN-777 and FTO.

Selective enhancement of organic dye properties through encapsulation in rotaxane orientational isomers.

We report the synthesis and characterisation of [2]rotaxanes based on a stilbazolium dye and a calix[6]arene macrocycle. Since both components are non-symmetric, two orientational isomers are obtained. The two isomers display distinct photophysical and photochemical properties in solution and solid state, superior to the unencapsulated dye.

Phosphine Oxide Porous Organic Polymers Incorporating Cobalt(II) Ions: Synthesis, Characterization, and Investigation of H2 Production.

Suitably functionalized porous matrices represent versatile platforms to support well-dispersed catalytic centers. In the present study, porous organic polymers (POPs) containing phosphine oxide groups were fabricated to bind transition metals and to be investigated for potential electrocatalytic applications. Cross-linking of mono- and di-phosphine monomers with multiple phenyl substituents was subject to the Friedel-Crafts (F-C) reaction and the oxidation process, which generated phosphine oxide porous polymers with pore capacity up to 0.92 cm3/g and a surface area of about 990 m2/g. The formation of the R3P·BH3 borohydride adduct during synthesis allows to extend the library of phosphine-based monomeric entities when using FeCl3. The porous polymers were loaded with 0.8-4.2 w/w % of cobalt(II) and behaved as hydrogen evolution reaction (HER) catalysts with a Faradaic efficiency of up to 95% (5.81 × 10-5 mol H2 per 11.76 C) and a stable current density during repeated controlled potential experiments (CPE), even though with high overpotentials (0.53-0.68 V to reach a current density of 1 mA·cm-2). These studies open the way to the effectiveness of tailored phosphine oxide POPs produced through an inexpensive and ecofriendly iron-based catalyst and for the insertion of transition metals in a porous architecture, enabling electrochemically driven activation of small molecules.

Dimerizing cascades of enallenamides reveal the visible-light-promoted activation of cumulated C-C double bonds.

The visible-light-promoted activation of conjugated C-C double bonds is well developed, while that of cumulated systems is underexplored. We present the feasibility of this challenging approach. The localization of a triplet on an allenamide arm can be favored over that on a conjugated alkene. Allenamides with an arylacryloyl arm dimerize at room temperature in the presence of visible light and an iridium(iii) photocatalyst. Two orthogonal polycyclizations took place and their outcome is entirely dictated by the substitution of the alkene partner. Both cascades afford complex molecular architectures with high selectivity. Products form through the ordered rearrangement of twelve π electrons, providing a [3.2.0] bicyclic unit tethered to a fused tricycle, whose formation included an aryl C-H functionalization step, using disubstituted alkenes. The outcome was reverted with trisubstituted ones, which gave rise to taxane-like bridged tricycles that had two six-membered lactams flanking a cyclooctane ring, which was established through the creation of four alternate C-C bonds.

Orthogonal Syntheses of 3.2.0 Bicycles from Enallenes Promoted by Visible Light.

Enallenes can be readily converted into two families of 3.2.0 (hetero)bicycles with high diastereoselectivities through the combination of visible light with a suitable Ir(III) complex (1 mol %). Two complementary pathways, namely, a photocycloaddition versus a radical chain, can then take place. Both manifolds grant complete regiocontrol of the allene difunctionalization. This is accompanied by an original 1,3-group shift using sulfonyl allenamides that deliver a congested tetrasubstituted headbridging carbon in the corresponding product.

"Bottled" spiro-doubly aromatic trinuclear [Pd2Ru]+ complexes.

Following an ongoing interest in the study of transition metal complexes with exotic bonding networks, we report herein the synthesis of a family of heterobimetallic triangular clusters involving Ru and Pd atoms. These are the first examples of trinuclear complexes combining these nuclei. Structural and bonding analyses revealed both analogies and unexpected differences for these [Pd2Ru]+ complexes compared to their parent [Pd3]+ peers. Noticeably, participation of the Ru atom in the π-aromaticity of the coordinated benzene ring makes the synthesized compound the second reported example of 'bottled' double aromaticity. This can also be referred to as spiroaromaticity due to the participation of Ru in two aromatic systems at a time. Moreover, the [Pd2Ru]+ kernel exhibits unprecedented orbital overlap of Ru d z 2 AO and two Pd d xy or d x 2-y 2 AOs. The present findings reveal the possibility of synthesizing stable clusters with delocalized metal-metal bonding from the combination of non-adjacent elements of the periodic table which has not been reported previously.

Synthesis of Carbolines via Palladium/Carboxylic Acid Joint Catalysis.

The combination of a Pd(0) complex with benzoic acid converts propargylic tryptamines to the corresponding tetrahydro-ß-carbolines. The method uses unprotected indoles and affords the desired products with ample functional group tolerance. Detailed modeling studies reveal a close synergy between the organic and metal catalysts, which enables sequential alkyne isomerization, indole C-H activation, and eventual C-C reductive elimination to afford the target heterocycles.

Coordination Driven Capture of Nicotine Inside a Mesoporous MOF.

Metal organic frameworks (MOFs) are a wide class of crystalline porous polymers studied in many fields, ranging from catalysis to gas storage. In the past few years, MOFs have been studied for the encapsulation of organic or organometallic molecules and for the development of potential drug carriers. Here, we report on the study of two structurally-related mesoporous Cu-MOFs, namely PCN-6 and PCN-6' (PCN stands for Porous Coordination Network), for nicotine trapping. Nicotine is a well-known alkaloid liquid molecule at room temperature, whose crystalline structure is still unknown. In this work, the loading process was monitored by electron ionization mass spectrometry by using a direct insertion probe (DIP-EI/MS), infrared (IR), and ultraviolet/visible (UV/VIS) analysis. Both nuclear magnetic resonance (NMR) spectroscopy and thermogravimetric (TGA) analysis showed evidence that nicotine trapping reaches remarkable uptakes up to 40 wt %. In the case of PCN-6@nicotine, X-ray structural resolution revealed that the guest uptake is triggered by coordination of the pyridine ring of nicotine to the copper nuclei of the paddle-wheel units composing the framework of PCN-6.