Highly Conductive Covalent-Organic Framework Films.

Chemically inert organic networks exhibiting electrical conductivity comparable to metals can advance organic electronics, catalysis, and energy storage systems. Covalent-organic frameworks (COFs) have emerged as promising materials for those applications due to their high crystallinity, porosity, and tunable functionality. However, their low conductivity has limited their practical utilization. In this study, copper-coordinated-fluorinated-phthalocyanine and 2,3,6,7-tetrahydroxy-9,10-anthraquinone-based COF (CuPc-AQ-COF) films with ultrahigh conductivity are developed. The COF films exhibit an electrical conductivity of 1.53 × 103 S m-1 and a Hall mobility of 6.02 × 102 cm2 V-1 s-1 at 298 K, reaching the level of metals. The films are constructed by linking phthalocyanines and anthraquinones through vapor-assisted synthesis. The high conductivity properties of the films are attributed to the molecular design of the CuPc-AQ-COFs and the generation of high-quality crystals via the vapor-assisted method. Density functional theory analysis reveals that an efficient donor-acceptor system between the copper-coordinated phthalocyanines and anthraquinones significantly promotes charge transfer. Overall, the CuPc-AQ-COF films set new records of COF conductivity and mobility and represent a significant step forward in the development of COFs for electronic, catalytic, and electrochemical applications.

Highly Conductive Imidazolate Covalent Organic Frameworks with Ether Chains as Solid Electrolytes for Lithium Metal Batteries.

Poly(ethylene oxide) (PEO)-based electrolytes are often used for Li+ conduction as they can dissociate the Li salts efficiently. However, high entanglement of the chains and lack of pathways for rapid ion diffusion limit their applications in advanced batteries. Recent developments in ionic covalent organic frameworks (iCOFs) showed that their highly ordered structures provide efficient pathways for Li+ transport, solving the limitations of traditional PEO-based electrolytes. Here, we present imidazolate COFs, PI-TMEFB-COFs, having methoxyethoxy chains, synthesized by Debus-Radziszewski multicomponent reactions and their ionized form, Li+@PI-TMEFB-COFs, showing a high Li+ conductivity of 8.81 mS cm-1 and a transference number of 0.974. The mechanism for such excellent electrochemical properties is that methoxyethoxy chains dissociate LiClO4, making free Li+, then those Li+ are transported through the imidazolate COFs' pores. The synthesized Li+@PI-TMEFB-COFs formed a stable interface with Li metal. Thus, employing Li+@PI-TMEFB-COFs as the solid electrolyte to assemble LiFePO4 batteries showed an initial discharge capacity of 119.2 mAh g-1 at 0.5 C, and 82.0 % capacity and 99.9 % Coulombic efficiency were maintained after 400 cycles. These results show that iCOFs with ether chains synthesized via multicomponent reactions can create a new chapter for making solid electrolytes for advanced rechargeable batteries.

Anthraquinone-Based Silicate Covalent Organic Frameworks as Solid Electrolyte Interphase for High-Performance Lithium-Metal Batteries.

Lithium (Li)-metal batteries (LMBs) possess the highest theoretical energy density among current battery designs and thus have enormous potential for use in energy storage. However, the development of LMBs has been severely hindered by safety concerns arising from dendrite growth and unstable interphases on the Li anode. Covalent organic frameworks (COFs) incorporating either redox-active or anionic moieties on their backbones have high Li-ion (Li+) conductivities and mechanical/chemical stabilities, so are promising for solid electrolyte interphases (SEIs) in LMBs. Here, we synthesized anthraquinone-based silicate COFs (AQ-Si-COFs) that contained both redox-active and anionic sites via condensation of tetrahydroxyanthraquinone with silicon dioxide. The nine Li+-mediated charge/discharge processes enabled the AQ-Si-COF to demonstrate an ionic conductivity of 9.8 mS cm-1 at room temperature and a single-ion-conductive transference number of 0.92. Computational studies also supported the nine Li+ mechanism. We used AQ-Si-COF as the solid electrolyte interphase on the Li anode. The LMB cells with a LiCoO2 cathode attained a maximum reversible capacity of 188 mAh g-1 at 0.25 C during high-voltage operation. Moreover, this LMB cell demonstrated suppressed dendrite growth and stable cyclability, with its capacity decreasing by less than 3% up to 100 cycles. These findings demonstrate the effectiveness of our redox-active and anionic COFs and their practical utility as SEI in LMB.

Poly(Ethylene Piperidinium)s for Anion Exchange Membranes.

The lack of anion exchange membranes (AEMs) that possess both high hydroxide conductivity and stable mechanical and chemical properties poses a major challenge to the development of high-performance fuel cells. Improving one side of the balance between conductivity and stability usually means sacrificing the other. Herein, we used facile, high-yield chemical reactions to design and synthesize a piperidinium polymer with a polyethylene backbone for AEM fuel cell applications. To improve the performance, we introduced ionic crosslinking into high-cationic-ratio AEMs to suppress high water uptake and swelling while further improving the hydroxide conductivity. Remarkably, PEP80-20PS achieved a hydroxide conductivity of 354.3 mS cm-1 at 80 °C while remaining mechanically stable. Compared with the base polymer PEP80, the water uptake of PEP80-20PS decreased by 69 % from 813 % to 350 %, and the swelling decreased substantially by 85 % from 350.0 % to 50.2 % at 80 °C. PEP80-20PS also showed excellent alkaline stability, 84.7 % remained after 35 days of treatment with an aqueous KOH solution. The chemical design in this study represents a significant advancement toward the development of simultaneously highly stable and conductive AEMs for fuel cell applications.

Recent Advances in Diversity-Oriented Polymerization Using Cu-Catalyzed Multicomponent Reactions.

Diversification of polymer structures is important for imparting various properties and functions to polymers, so as to realize novel applications of these polymers. In this regard, diversity-oriented polymerization (DOP) is a powerful synthetic strategy for producing diverse and complex polymer structures. Multicomponent polymerization (MCP) is a key method for realizing DOP owing to its combinatorial features and high efficiency. Among the MCP methods, Cu-catalyzed MCP (Cu-MCP) has recently paved the way for DOP by overcoming the synthetic challenges of the previous MCP methods. Here the emergence and progress of Cu-MCP, its current challenges, and future perspectives are discussed.

Ru-Catalyzed, cis-Selective Living Ring-Opening Metathesis Polymerization of Various Monomers, Including a Dendronized Macromonomer, and Implications to Enhanced Shear Stability.

An unsaturated polymer's cis/trans-olefin content has a significant influence on its properties. For polymers obtained by ring-opening metathesis polymerization (ROMP), the cis/trans-olefin content can be tuned by using specific catalysts. However, cis-selective ROMP has suffered from narrow monomer scope and lack of control over the polymerization (giving polymers with broad molecular weight distributions and prohibiting the synthesis of block copolymers). Herein, we report the versatile cis-selective controlled living ROMP of various endo-tricyclo[4.2.2.02,5]deca-3,9-diene and various norbornene derivatives using a fast-initiating dithiolate-chelated Ru catalyst. Polymers with cis-olefin content as high as 99% could be obtained with high molecular weight (up to Mn of 105.1 kDa) and narrow dispersity (<1.4). The living nature of the polymerization was also exploited to prepare block copolymers with high cis-olefin content for the first time. Furthermore, owing to the successful control over the stereochemistry and narrow dispersity, we could compare cis- and trans-rich polynorbornene and found the former to have enhanced resistance to shear degradation.

Mechanochemical Degradation of Denpols: Synthesis and Ultrasound-Induced Chain Scission of Polyphenylene-Based Dendronized Polymers.

New polyphenylene-based dendronized polymers (denpols), exhibiting extended and rigid conformations, were prepared using ring-opening metathesis polymerization (ROMP). Their mechanochemical degradation was explored in ultrasound-induced elongational flow fields. Degradation rate constants were obtained for polyphenylene-based denpols, of varying generation, across a degree of polymerization (DP) range of ∼100-600. In general, it was found that larger side chains led to increased degradation rates and that the rate enhancement was proportional to the natural log of persistence length (Ln( lp)) or the square root of monomer molecular weight ( Mmon0.5). These relationships led to the generation of "master curves" in which the rate constant trends for each polymer series converged, enabling accurate prediction of degradation rate constants for related polymers bearing long alkyl chains or ester-type dendrons. Furthermore, we observed evidence for, and used computational modeling to support, polymer chains undergoing multiple scissions during a single elongation event, leading to faster degradation of daughter fragments that come from parent polymers with large side chains.

Diversity-Oriented Polymerization: One-Shot Synthesis of Library of Graft and Dendronized Polymers by Cu-Catalyzed Multicomponent Polymerization.

Graft and dendronized polymers have attracted much attention in the polymer community, and there have been significant efforts to develop better synthetic methods. Herein, we report the highly efficient synthesis of graft and dendronized polymers by using Cu-catalyzed multicomponent polymerization (MCP). Based on diversity-oriented synthesis, we prepared a library of various graft and dendronized polymers from combinations of three types of monomers (mono-functionalized alkynes, bis-sulfonyl azides, and diamines/diols) that are bench stable and readily accessible. After reaction optimization, 54 samples of high-molecular-weight graft and dendronized polymers were prepared, the MCP method allowing simultaneous manipulation of the structures of both the main chains and the side chains. Moreover, because of the severe steric hindrance of the side chains, these polymers adopted extended conformations, as shown by the large shape parameter in solution. Also, the extended morphology of the single polymer chains was directly visualized by atomic force microscopy and transmission electron microscopy in the solid state. Most importantly, this diversity-oriented polymerization became possible because of highly step-economical and efficient one-step MCP, paving the way toward the easily tunable synthesis of graft and dendronized polymers.

Multiple Olefin Metathesis Polymerization That Combines All Three Olefin Metathesis Transformations: Ring-Opening, Ring-Closing, and Cross Metathesis.

We demonstrated tandem ring-opening/ring-closing metathesis (RO/RCM) polymerization of monomers containing two cyclopentene moieties and postmodification via insertion polymerization. In this system, well-defined polymers were efficiently formed by tandem cascade RO/RCM reaction pathway. Furthermore, these polymers could be transformed to new A,B-alternating copolymers via a sequential cross metathesis reaction with a diacrylate. Additionally, we demonstrated the concept of multiple olefin metathesis polymerization in which the dicyclopentene and diacrylate monomers underwent all three olefin metathesis transformations (ring-opening, ring-closing, and cross metathesis) in one shot to produce A,B-alternating copolymer.

Charge-Delocalized Triptycene-Based Ionic Porous Organic Polymers as Quasi-Solid-State Electrolytes for Lithium Metal Batteries.

Ideal solid electrolytes for lithium (Li) metal batteries should conduct Li+ rapidly with low activation energy, exhibit a high Li+ transference number, form a stable interface with the Li anode, and be electrochemically stable. However, the lack of solid electrolytes that meet all of these criteria has remained a considerable bottleneck in the advancement of lithium metal batteries. In this study, we present a design strategy combining all of those requirements in a balanced manner to realize quasi-solid-state electrolyte-enabled Li metal batteries (LMBs). We prepared Li+-coordinated triptycene-based ionic porous organic polymers (Li+@iPOPs). The Li+@iPOPs with imidazolates and phenoxides exhibited a high conductivity of 4.38 mS cm-1 at room temperature, a low activation energy of 0.627 eV, a high Li+ transference number of 0.95, a stable electrochemical window of up to 4.4 V, excellent compatibility with Li metal electrodes, and high stability during Li deposition/stripping cycles. The high performance is attributed to charge delocalization in the backbone, mimicking the concept of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), which facilitates the diffusion of coordinated Li+ through the porous space of the triptycene-based iPOPs. In addition, Li metal batteries assembled using Li+@Trp-Im-O-POPs as quasi-solid-state electrolytes and a LiFePO4 cathode showed an initial capacity of 114 mAh g-1 and 86.7% retention up to 200 cycles.

Macrocycle-Based Covalent Organic Frameworks.

Macrocycles with well-defined cavities and the ability to undergo supramolecular interactions are classical materials that have played an essential role in materials science. However, one of the most substantial barriers limiting the utilization of macrocycles is their aggregation, which blocks the active regions. Among many attempted strategies to prevent such aggregation, installing macrocycles into covalent organic frameworks (COFs), which are porous and stable reticular networks, has emerged as an ideal solution. The resulting macrocycle-based COFs (M-COFs) preserve the macrocycles' unique activities, enabling applications in various fields such as single-atom catalysis, adsorption/separation, optoelectronics, phototherapy, and structural design of forming single-layered or mechanically interlocked COFs. The resulting properties are unmatchable by any combination of macrocycles with other substrates, opening a new chapter in advanced materials. This review focuses on the latest progress in the concepts, synthesis, properties, and applications of M-COFs, and presents an in-depth outlook on the challenges and opportunities in this emerging field.

Towards the fastest kinetics and highest uptake of post-functionalized UiO-66 for Hg2+ removal from water.

Recent advances in adsorbents have improved the removal of mercury ions from wastewater. Metal-organic frameworks (MOFs) have been increasingly used as adsorbents due to their high adsorption capacity and ability to adsorb various heavy metal ions. UiO-66 (Zr) MOFs are mainly used because they are highly stable in aqueous solutions. However, most functionalized UiO-66 materials are unable to achieve a high adsorption capacity because of the undesired reactions that occur during post-functionalization. Herein, we report a facile post-functionalization method to synthesize a MOF adsorbent with fully active amide- and thiol-functionalized chelating groups, termed UiO-66-A.T. UiO-66-A.T. was synthesized via a two-step reaction by crosslinking with a monomer containing a disulfide moiety, followed by disulfide cleavage to activate the thiol groups. UiO-66-A.T. removed Hg2+ from water with a maximum adsorption capacity of 691 mg g-1 and a rate constant of 0.28 g mg-1 min-1 at pH 1. In a mixed solution containing 10 different heavy metal ions, UiO-66-A.T. has a Hg2+ selectivity of 99.4%, which is the highest reported to date. These results demonstrate the effectiveness of our design strategy for synthesizing purely defined MOFs to achieve the best Hg2+ removal performance to date among post-functionalized UiO-66-type MOF adsorbents.

Conformation Dynamics of Single Polymer Strands in Solution.

Conformational changes in macromolecules significantly affect their functions and assembly into high-level structures. Despite advances in theoretical and experimental studies, investigations into the intrinsic conformational variations and dynamic motions of single macromolecules remain challenging. Here, liquid-phase transmission electron microscopy enables the real-time tracking of single-chain polymers. Imaging linear polymers, synthetically dendronized with conjugated aromatic groups, in organic solvent confined within graphene liquid cells, directly exhibits chain-resolved conformational dynamics of individual semiflexible polymers. These experimental and theoretical analyses reveal that the dynamic conformational transitions of the single-chain polymer originate from the degree of intrachain interactions. In situ observations also show that such dynamics of the single-chain polymer are significantly affected by environmental factors, including surfaces and interfaces.

Conformation of Tunable Nanocylinders: Up to Sixth-Generation Dendronized Polymers via Graft-Through Approach by ROMP.

Well-defined dendronized polymers (denpols) bearing high-generation dendron are attractive nano-objects as high persistency provides distinct properties, contrast to the random coiled linear polymers However, their syntheses via graft-through approach have been very challenging due to their structural complexity and steric hindrance retarding polymerization. Here, we report the first example of the synthesis of poly(norbornene) (PNB) containing ester dendrons up to the sixth generation (G6) by ring-opening metathesis polymerization. This is the highest generation ever polymerized among dendronized polymers prepared by graft-through approach, producing denpols with molecular weight up to 1960 kg/mol. Combination of size-exclusion chromatography, light scattering, and neutron scattering allowed a thorough structural study of these large denpols in dilute solution. A semiflexible cylinder model was successfully applied to represent both the static and dynamic experimental quantities yielding persistent length (l p), cross-sectional radius (R cs), and contour length (L). The denpol persistency seemed to increase with generation, with l p reaching 27 nm (Kuhn length 54 nm) for PNB-G6, demonstrating a rod-like conformation. Poly(endo-tricycle[4.2.2.0]deca-3,9-diene) (PTD) denpols exhibited larger persistency than the PNB analogues of the same generation presumably due to the higher grafting density of the PTD denpols. As the dendritic side chains introduce shape anisotropy into the denpol backbone, future work will entail a study of these systems in the concentrated solutions and melts.