RESUMO
Digital tomosynthesis (DTS) technology has attracted much attention in the field of nondestructive testing of printed circuit boards (PCB) due to its high resolution and suitability to thin slab objects. However, the traditional DTS iterative algorithm is computationally demanding, and its real-time processing of high-resolution and large volume reconstruction is infeasible. To address this issue, we in this study propose a multiple multi-resolution algorithm, including two multi-resolution strategies: volume domain multi-resolution and projection domain multi-resolution. The first multi-resolution scheme employs a LeNet-based classification network to divide the roughly reconstructed low-resolution volume into two sub-volumes namely, (1) the region of interest (ROI) with welding layers that necessitates high-resolution reconstruction, and (2) the remaining volume with unimportant information which can be reconstructed in low-resolution. When X-rays in adjacent projection angles pass through many identical voxels, information redundancy is prevalent between the adjacent image projections. Therefore, the second multi-resolution scheme divides the projections into non-overlapping subsets, using only one subset for each iteration. The proposed algorithm is evaluated using both the simulated and real image data. The results demonstrate that the proposed algorithm is approximately 6.5 times faster than the full-resolution DTS iterative reconstruction algorithm without compromising image reconstruction quality.
Assuntos
Algoritmos , Processamento de Imagem Assistida por Computador , Processamento de Imagem Assistida por Computador/métodos , Imagens de Fantasmas , Tomografia Computadorizada por Raios X/métodosRESUMO
BACKGROUND: Cushing's disease (CD) is rare in pediatric patients. It is characterized by elevated plasma adrenocorticotropic hormone (ACTH) from pituitary adenomas, with damage to multiple systems and development. In recent years, genetic studies have shed light on the etiology and several mutations have been identified in patients with CD. CASE PRESENTATION: A girl presented at the age of 10 years and 9 months with facial plethora, hirsutism and acne. Her vision and eye movements were impaired. A quick weight gain and slow growth were also observed. Physical examination revealed central obesity, moon face, buffalo hump, supra-clavicular fat pads and bruising. Her plasma ACTH level ranged between 118 and 151 pg/ml, and sella enhanced MRI showed a giant pituitary tumor of 51.8 × 29.3 × 14.0 mm. Transsphenoidal pituitary debulk adenomectomy was performed and immunohistochemical staining confirmed an ACTH-secreting adenoma. Genetic analysis identified a novel germline GPR101 (p.G169R) and a somatic USP8 (p. S719del) mutation. They were hypothesized to impact tumor growth and function, respectively. CONCLUSIONS: We reported a rare case of pediatric giant pituitary ACTH adenoma and pointed out that unusual concurrent mutations might contribute to its early onset and large volume.
Assuntos
Adenoma Hipofisário Secretor de ACT , Adenoma , Hipersecreção Hipofisária de ACTH , Neoplasias Hipofisárias , Adenoma Hipofisário Secretor de ACT/diagnóstico , Adenoma Hipofisário Secretor de ACT/genética , Adenoma Hipofisário Secretor de ACT/cirurgia , Adenoma/diagnóstico , Adenoma/genética , Adenoma/cirurgia , Hormônio Adrenocorticotrópico , Endopeptidases/genética , Complexos Endossomais de Distribuição Requeridos para Transporte/genética , Feminino , Células Germinativas/patologia , Humanos , Mutação , Hipersecreção Hipofisária de ACTH/diagnóstico , Neoplasias Hipofisárias/genética , Neoplasias Hipofisárias/cirurgia , Receptores Acoplados a Proteínas G , Ubiquitina Tiolesterase/genéticaRESUMO
OBJECTIVE: To reduce secondary artifactes generated by the current interpolation-based metal artifact reduction (MAR) methods, this study proposes and tests a new Poisson fusion sinogram based metal artifact reduction (FS-MAR) method. METHODS: The proposed FS-MAR method consists of (1) generating the prior image, (2) forward projecting this prior image and applying the Poisson blending technique to seamlessly replace the metal-affected sinogram of the original projection in the metal projection region (MPR) by the prior image projection to get the corrected metal-free sinogram, and (3) performing the filtered back projection (FBP) on the corrected sinogram and filling the metal image back to the metal-free corrected image to get the final artifact reduced image. Simulated images are calculated by taking clinical metal-free CT images as phantoms and inserting metals during the simulated projection process to get the corresponding metal-affected images by the FBP. After the simulated images are processed by the proposed MAR method, two metrics structural similarity index (SSIM) and peak signal-to-noise ratio (PSNR) are used to evaluate image quality. Finally, visual evaluation is also performed using several real clinical metal-affected images obtained from the Revision Radiology group. RESULTS: In two testing samples, using FS-MAR method yields the highest SSIM and PSNR of 0.8912 and 30.6693, respectively. Visual evaluation results on both simulated and clinical images also show that using FS-MAR method generates less image artifacts than using the interpolation-based algorithm. CONCLUSIONS: This study demonstrated that with the same prior image, applying the proposed Poisson FS-MAR method can achieve the higher image quality than using the interpolation-based algorithm.
Assuntos
Algoritmos , Artefatos , Processamento de Imagem Assistida por Computador , Metais , Imagens de Fantasmas , Tomografia Computadorizada por Raios XRESUMO
Objective.Cone beam computed tomography (CBCT) has been wildly used in clinical treatment of dental diseases. However, patients often have metallic implants in mouth, which will lead to severe metal artifacts in the reconstructed images. To reduce metal artifacts in dental CBCT images, which have a larger amount of data and a limited field of view compared to computed tomography images, a new dental CBCT metal artifact reduction method based on a projection correction and a convolutional neural network (CNN) based image post-processing model is proposed in this paper. Approach.The proposed method consists of three stages: (1) volume reconstruction and metal segmentation in the image domain, using the forward projection to get the metal masks in the projection domain; (2) linear interpolation in the projection domain and reconstruction to build a linear interpolation (LI) corrected volume; (3) take the LI corrected volume as prior and perform the prior based beam hardening correction in the projection domain, and (4) combine the constructed projection corrected volume and LI-volume slice-by-slice in the image domain by two concatenated U-Net based models (CNN1 and CNN2). Simulated and clinical dental CBCT cases are used to evaluate the proposed method. The normalized root means square difference (NRMSD) and the structural similarity index (SSIM) are used for the quantitative evaluation of the method.Main results.The proposed method outperforms the frequency domain fusion method (FS-MAR) and a state-of-art CNN based method on the simulated dataset and yields the best NRMSD and SSIM of 4.0196 and 0.9924, respectively. Visual results on both simulated and clinical images also illustrate that the proposed method can effectively reduce metal artifacts.Significance. This study demonstrated that the proposed dual-domain processing framework is suitable for metal artifact reduction in dental CBCT images.
Assuntos
Artefatos , Tomografia Computadorizada de Feixe Cônico Espiral , Humanos , Algoritmos , Tomografia Computadorizada por Raios X/métodos , Tomografia Computadorizada de Feixe Cônico , Processamento de Imagem Assistida por Computador/métodos , Imagens de FantasmasRESUMO
OBJECTIVE: To evaluate the disinfection efficacy of MTAD on Enterococcus faecalis biofilm and smear layer colonization in apical isthums of the root canal system. METHODS: Fifteen extracted human maxillary first premolars with isthmus anatomic structure which confirmed by stereo-microscope were contaminated with E. faecalis in vitro and randomly divided into 5 groups: the first group was not treated serving as a baseline control, the second group was treated by normal saline (NS) serving as negative control, the third group was treated by MTAD , the forth group by 5.25% NaOCl, and the fifth group by 5.25% NaOCl + EDTA. All roots in the latter four groups were instrumented by Protaper rotary files and irrigated with respective irrigant, then the roots were split longitudinally and a scanning electron microscope was used to evaluate the antibacterial activity and smear layer cleaning ability of irrigants on isthmus. RESULTS: In the first group, E. faecalis colonized on the isthmus surface and aggregated together to form biofilm-like microorganism community, some bacteria also colonized in the dentinal tubules. When treated with NS, both smear layer and bacteria remained (median of smear layer score was 5). MTAD can remove partial smear layer, and have limited antibacterial activity, some bacteria embedded in smear layer (the median was 3) and were destroyed; In 5.25% NaOCl treatmentgroup, the smear layer was not removed (median of smear layer score was also 5), but all bacteria on the surface were extinguished. The combined use of 5.25% NaOCl and EDTA produced a cleaner isthmus surface and had marked antimicrobial effect, with the median of smear layer score being only 1. CONCLUSION: MTAD may permeate into the isthmus area of apical root canal system, but only performed a partial effect of disinfection and limited antibacterial activity. Sodium hypochlorite cooperated with EDTA can remove infection effectively in the isthmus area.
Assuntos
Ácido Cítrico/farmacologia , Doxiciclina/farmacologia , Periodontite Periapical/microbiologia , Tecido Periapical/ultraestrutura , Polissorbatos/farmacologia , Irrigantes do Canal Radicular/farmacologia , Biofilmes/efeitos dos fármacos , Enterococcus faecalis/efeitos dos fármacos , Infecções por Bactérias Gram-Positivas/microbiologia , Humanos , Técnicas In Vitro , Tecido Periapical/microbiologia , Hipoclorito de Sódio/farmacologiaRESUMO
In this paper, a low-cost PC-based, high-quality and interactive 3D stereoscopic medical visualization system is presented, which can be clinically used for diagnosis and surgical planning. The algorithms of direct volume rendering have been improved for realization with the programmable graphics hardware under PC environment. Local illumination, classification and non-polygonal iso-surface rendering are also incorporated into the system in appropriate consideration of both high-quality rendering and real-time interaction. The medical visualization system has been applied to the neurosurgical and orthopedic planning and the effectiveness has been clinically proved.
Assuntos
Imageamento Tridimensional , Técnicas de Planejamento , Tomografia Computadorizada por Raios X/métodos , Algoritmos , Procedimentos Neurocirúrgicos , Procedimentos Ortopédicos , Interface Usuário-ComputadorRESUMO
We put forward an image rendering system based on pipeline framework for processing and displaying medical images. Compared to original computer graphics algorithms divided into volume rendering and surface rendering, this framework can effectively comprehend methods of computer graphics and image processing, import some new concepts such as vertex buffer, pixel buffer and texture buffer. We implement Shaded Surface Display, Maximum Intensity Projection, Digitally Reconstructed Radiography, Multi planar Reformation, Curved Planar Reformation and Interactive Virtual Endoscopy in our new developed PACS image system.
Assuntos
Algoritmos , Processamento de Imagem Assistida por Computador/métodos , Imageamento Tridimensional , Sistemas de Informação em Radiologia , Sistemas Computacionais , Sistemas Computadorizados de Registros Médicos , SoftwareRESUMO
INTRODUCTION: The aim of this study was to compare the outcome of a root canal treatment with and without additional ultrasonic activation of the irrigant. METHODS: Single-rooted teeth with radiographic evidence of periapical bone loss were randomly assigned to 2 treatment groups. In both groups syringe irrigation was performed, and in one group the irrigant was also activated by ultrasound. Ten to 19 months after treatment, the teeth were examined by using periapical radiography (PA) and cone-beam computed tomography (CBCT). Area and volume of the periapical lesions were measured, and the outcome was presented in 4 categories: absence, reduction or enlargement of the radiolucency, or uncertain. Lesions were classified as reduced or enlarged when the change in size of the radiolucency was 20% or more. RESULTS: The recall rate was 82%, and 84 teeth were analyzed. CBCT detected significantly more post-treatment lesions than PA (P = .038), but the percentages of absence and reduction of the radiolucency together revealed by CBCT and PA were similar (P = .383). The CBCT results showed that absence of the radiolucency was observed in 16 of 84 teeth (19%) and reduction of the radiolucency in 61 of 84 teeth (72.6%), but there was no significant difference between the results of the 2 groups (P = .470). Absence and reduction of the radiolucency together were observed in the ultrasonic group in 39 of 41 teeth (95.1%) and in the syringe group in 38 of 43 teeth (88.4%). CONCLUSIONS: Root canal treatments with and without additional ultrasonic activation of the irrigant contributed equally to periapical healing.
Assuntos
Irrigantes do Canal Radicular/administração & dosagem , Preparo de Canal Radicular/métodos , Tratamento do Canal Radicular/métodos , Adolescente , Adulto , Idoso , Tomografia Computadorizada de Feixe Cônico/métodos , Cavidade Pulpar/diagnóstico por imagem , Cavidade Pulpar/patologia , Ácido Edético/administração & dosagem , Feminino , Seguimentos , Humanos , Masculino , Pessoa de Meia-Idade , Agulhas , Doenças Periapicais/diagnóstico por imagem , Doenças Periapicais/terapia , Radiografia Interproximal/métodos , Radiografia Dentária Digital/métodos , Materiais Restauradores do Canal Radicular/uso terapêutico , Preparo de Canal Radicular/instrumentação , Hipoclorito de Sódio/administração & dosagem , Seringas , Irrigação Terapêutica/instrumentação , Irrigação Terapêutica/métodos , Resultado do Tratamento , Ultrassom , Cicatrização/fisiologia , Adulto JovemRESUMO
BACKGROUND: Streptococcus (S.) oligofermentans is a newly identified bacteria with a yet to be defined mechanism of sucrose metabolism that results in acid production. This study aimed to investigate the biochemical mechanisms of S. oligoferm-entans glucose metaolism. METHODS: The S. oligofermentans LMG21532, Lactobacillus (L.) fermentum 38 and the S. mutans UA140 were used to characterize sucrose metabolism by measuring lactate dehydrogenase (LDH) activity and lactic acid production. Continuous dynamics and high performance capillary electrophoresis were used to determine LDH activity and lactic acid production, respectively, from bacteria collected at 0, 10 and 30 minutes after cultured in 10% sucrose. RESULTS: These analyses demonstrated that LDH activity of the three bacterial strains examined remained stable but significantly different throughout the sucrose fermentation process. The S. oligofermentans LDH activity ((0.61 ± 0.05) U/mg) was significantly lower than that of L. fermentum ((52.91 ± 8.97) U/mg). In addition, the S. oligofermentans total lactate production ((0.048 ± 0.021) mmol/L) was also significantly lower than that of L. fermentum ((0.958 ± 0.201) mmol/L). Although the S. oligofermentans LDH production was almost double of that produced by S. mutans ((0.32 ± 0.07) U/mg), lactic acid production was approximately one sixth that of S. mutans ((0.296 ± 0.058) mmol/L). Additional tests examining pyruvic acid production (the LDH substrate) demonstrated that lactic acid concentrations correlated with pyruvic acid production. That is, pyruvic acid production by S. oligofermentans was undetectable following sucrose incubation, however, (0.074 ± 0.024) and (0.175 ± 0.098) mmol/L pyruvic acid were produced by S. mutans and L. fermentum, respectively. CONCLUSION: S. oligofermentans is incapable of fermenting carbohydrates to produce enough pyruvic acid, which results in reduced lactic acid production.
Assuntos
Ácido Láctico/metabolismo , Ácido Pirúvico/metabolismo , Streptococcus/metabolismo , Sacarose/metabolismo , L-Lactato Desidrogenase/metabolismoRESUMO
The CT uroscan consists of three to four time-spaced acquisitions of the same patient. After registration of these acquisitions, the data forms a volume in which each voxel contains a vector of elements corresponding to the information of the CT uroscan acquisitions. In this paper we will present a segmentation tool in order to differentiate the anatomical structures within the vectorial volume. Because of the partial volume effect (PVE), soft segmentation is better suited because it allows regions or classes to overlap. Gaussian mixture model is often used in statistical classifier to realize soft segmentation by getting classes probability distributions. But this model relies only on the intensity distributions, which will lead a misclassification on the boundaries and on inhomogeneous regions with noise. In order to solve this problem, a neighborhood weighted Gaussian mixture model is proposed in this paper. Expectation maximization algorithm is used as optimization method. The experiments demonstrate that the proposed method can get a better classification result and is less affected by the noise.
Assuntos
Algoritmos , Interpretação de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Rim/diagnóstico por imagem , Reconhecimento Automatizado de Padrão/métodos , Técnica de Subtração , Tomografia Computadorizada por Raios X/métodos , Urografia/métodos , Inteligência Artificial , Interpretação Estatística de Dados , Humanos , Aumento da Imagem/métodos , Distribuição Normal , Imagens de Fantasmas , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , Tomografia Computadorizada por Raios X/instrumentaçãoRESUMO
OBJECTIVE: To investigate the buffer capacity of insoluble plaque mass including bacteria and glucans matrix. METHODS: Plaque samples (starved or incubated 1 h with 10% sucrose), Streptococcus mutans (S. mutans) mass, and insoluble/soluble glucans were titrated with 1 mmol/L HCl. Meanwhile, the density of bacteria was counted and related to buffer capacity. RESULTS: The bacteria density had significant effects on acid buffer capacity in dental plaque, but the effect reduced with consuming sugar. S. mutans mass with no sucrose incubating contributed to the buffer capacity of (0.609 +/- 0.202) mmol/L, and S. mutans mass with 2% sucrose had only the buffer capacity of (0.099 +/- 0.047) mmol/L. In the mean time, glucans had no effect on acid buffering (0.028 - 0.032 mmol/L). CONCLUSIONS: The bacteria including S. mutans may be the main contributor to acid buffering in plaque solid.
Assuntos
Placa Dentária/fisiopatologia , Glucanos/metabolismo , Streptococcus mutans/metabolismo , Ácidos , Adolescente , Adulto , Contagem de Colônia Microbiana , Suscetibilidade à Cárie Dentária , Placa Dentária/microbiologia , Feminino , Humanos , Masculino , Adulto JovemRESUMO
OBJECTIVE: To develop a computer assisted CT scanning system for 3D dental cast measurement and to study its reliability. METHODS: 20 dental stone casts were scanned by helical CT and captured a series digital sliced radiographs of them. The program which was developed by Visual C 6.0 language and run under the Windows surroundings rebuilt the 3D graphics and measured the coordinate of the dental cast. These dental casts were scanned and measured to test the reliability of the system, contrasting with manual measurement. RESULTS: There was no significant difference between 3D CT scanning and manual measurement (P > 0.05). CONCLUSION: The system is a valuable computer assisted system for clinical diagnosis and treatment of malocclusion.