Diversity-oriented synthesis of polymer membranes with ion solvation cages.

Microporous polymers feature shape-persistent free volume elements (FVEs), which are permeated by small molecules and ions when used as membranes for chemical separations, water purification, fuel cells and batteries1-3. Identifying FVEs that have analyte specificity remains a challenge, owing to difficulties in generating polymers with sufficient diversity to enable screening of their properties. Here we describe a diversity-oriented synthetic strategy for microporous polymer membranes to identify candidates featuring FVEs that serve as solvation cages for lithium ions (Li+). This strategy includes diversification of bis(catechol) monomers by Mannich reactions to introduce Li+-coordinating functionality within FVEs, topology-enforcing polymerizations for networking FVEs into different pore architectures, and several on-polymer reactions for diversifying pore geometries and dielectric properties. The most promising candidate membranes featuring ion solvation cages exhibited both higher ionic conductivity and higher cation transference number than control membranes, in which FVEs were aspecific, indicating that conventional bounds for membrane permeability and selectivity for ion transport can be overcome4. These advantages are associated with enhanced Li+ partitioning from the electrolyte when cages are present, higher diffusion barriers for anions within pores, and network-enforced restrictions on Li+ coordination number compared to the bulk electrolyte, which reduces the effective mass of the working ion. Such membranes show promise as anode-stabilizing interlayers in high-voltage lithium metal batteries.

Controlling Charge Percolation in Solutions of Metal Redox Active Polymers: Implications of Microscopic Polyelectrolyte Dynamics on Macroscopic Energy Storage.

Soluble redox-active polymers (RAPs) enable size-exclusion nonaqueous redox flow batteries (NaRFBs) which promise high energy density. Pendants along the RAPs not only store charge but also engage in electron transfer to varying extents based on their designs. Here, we explore these phenomena in Metal-containing Redox Active Polymers (M-RAPs, M = Ru, Fe, Co). We assess by using cyclic voltammetry and chronoamperometry with ultramicroelectrodes the current response to electrolyte concentration spanning 3 orders of magnitude. Currents scaled as Ru-RAP > Fe-RAP ≫ Co-RAP, consistent with electron self-exchange trends in the small molecule analogues of the MII/III redox pair. Varying the ionic strength of the electrolyte also revealed nonmonotonic behavior, evidencing the impact of polyelectrolytic dynamics on M-RAP redox response. We developed a model to account for the behavior by combining kinetic Monte Carlo and Brownian dynamics near a boundary representing an electrode. While 1D pendant-to-pendant charge transfer along the chain is not a strong function of electrolyte concentration, the microstructure of the RAP at different electrolyte concentrations is decisively impacted, yielding qualitative trends to those observed experimentally. M-RAP size-exclusion NaRFBs using a poly viologen as negolyte varied in average potential with ∼1.54 V for Ru-RAP, ∼1.37 V for Fe-RAP, and ∼0.52 V for Co-RAP. Comparison of batteries at their optimal and suboptimal solution conditions as gauged from analytical experiments showed clear correlations in performance. This work provides a blueprint for understanding the factors underpinning charge transfer in solutions of RAPs for batteries and beyond.

Safety Evaluation of a Prototypical Diazirine-Based Covalent Crosslinker and Molecular Adhesive.

bis-Diazirine reagents are increasingly being used as polymer crosslinkers, adhesives, and photopatterning agents in the materials sciences literature, but little effort has been made thus far to document their chemical safety profile. Here, we describe the results of a detailed toxicity assessment of a representative bis-diazirine. Safety was evaluated by a series of in vitro assays, which found the product to be non-mutagenic in bacterial tester strains TA98 and TA100, non-corrosive and non-irritating to skin, and requiring no classification for eye irritation or serious damage. While in vitro tests do not capture the integrated whole animal system, and thus cannot completely rule out the possibility of adverse responses, the results of this study suggest a desirable safety profile for bis-diazirine reagents and provide a solid foundation upon which to add in vivo assessment of safety risk and dose-response studies.

A Cleavable Crosslinking Strategy for Commodity Polymer Functionalization and Generation of Reprocessable Thermosets.

Covalently crosslinked polymeric materials, known as thermosets, possess enhanced mechanical strength and thermal stability relative to the corresponding uncrosslinked thermoplastics. However, the presence of covalent inter-chain crosslinks that makes thermosets so attractive is precisely what makes them so difficult to reprocess and recycle. Here, we demonstrate the introduction of chemically cleavable groups into a bis-diazirine crosslinker. Application of this cleavable crosslinker reagent to commercial low-functionality polyolefins (or to a small-molecule model) results in the rapid, efficient introduction of molecular crosslinks that can be uncoupled by specific chemical inputs. These proof-of-concept findings provide one potential strategy for circularization of the thermoplastic/thermoset plastics economy, and may allow crosslinked polyolefins to be manufactured, used, reprocessed, and re-used without losing value. As an added benefit, the method allows the ready introduction of functionality into non-functionalized commodity polymers.

Diazirine-Functionalized Polyurethane Crosslinkers for Isocyanate-Free Curing of Polyol-Based Coatings.

Polyurethane coatings have strong material properties due to the hydrogen bonding inherent to the urethane groups. However, installing this urethane moiety usually requires curing through difficult-to-handle isocyanates. In this work, we show the development of a polyurethane-based crosslinker that can be used to formulate a one-component polyurethane coating with material properties similar to those of isocyanate-based polyurethane coatings. To achieve this, we used diazirine functionalities that generate carbenes upon heating, which react with alcohol functionalities in a polyol to generate a crosslinked network with a high storage modulus.

Molecular Engineering of Polyoxovanadate-Alkoxide Clusters and Microporous Polymer Membranes to Prevent Crossover in Redox-Flow Batteries.

The ongoing development of redox-active charge carriers for nonaqueous redox-flow batteries has led to energy-dense storage concepts and chemistries with high cell voltages. However, rarely are these candidates for flowable energy storage evaluated in tandem with cell separators compatible with organic solvent, limiting progress in the identification of suitable charge carrier-separator pairings. This is important, as the efficiency of a redox-flow battery is dictated by extent of active species crossover through a separator, dividing the two cells, and the contribution of the separator to cell resistance. Here, we report the size-dependent crossover behavior of a series of redox-active vanadium(III) acetoacetonate, and two polyoxovanadate-alkoxide clusters, [V6O7(OR)12] (R = CH3, C5H11) through separators derived from polymers of intrinsic microporosity (PIMs). We find that highly efficacious active-material blocking requires both increasing the size of the vanadium species and restricting pore swelling of the PIMs in nonaqueous electrolyte. Notably, increasing the size of the vanadium species does not significantly affect its redox reversibility, and reducing swelling decreases the conductivity of the separator by only 50%. By pairing polyoxometalate clusters with PIM membranes in nonaqueous redox-flow batteries, more efficient systems may well be within reach.

Brighter Red Fluorescent Proteins by Rational Design of Triple-Decker Motif.

Red fluorescent proteins (RFPs) are used extensively in chemical biology research as fluorophores for live cell imaging, as partners in FRET pairs, and as signal transducers in biosensors. For all of these applications, brighter RFP variants are desired. Here, we used rational design to increase the quantum yield of monomeric RFPs in order to improve their brightness. We postulated that we could increase quantum yield by restricting the conformational degrees of freedom of the RFP chromophore. To test our hypothesis, we introduced aromatic residues above the chromophore of mRojoA, a dim RFP containing a π-stacked Tyr residue directly beneath the chromophore, in order to reduce chromophore conformational flexibility via improved packing and steric complementarity. The best mutant identified displayed an absolute quantum yield increase of 0.07, representing an over 3-fold improvement relative to mRojoA. Remarkably, this variant was isolated following the screening of only 48 mutants, a library size that is several orders of magnitude smaller than those previously used to achieve equivalent gains in quantum yield in other RFPs. The crystal structure of the highest quantum yield mutant showed that the chromophore is sandwiched between two Tyr residues in a triple-decker motif of aromatic rings. Presence of this motif increases chromophore rigidity, as evidenced by the significantly reduced temperature factors compared to dim RFPs. Overall, the approach presented here paves the way for the rapid development of fluorescent proteins with higher quantum yield and overall brightness.