The Changing Phases of Bromopentafluorobenzene.

As part of a much larger study on non-covalent interactions in binary adducts, we have explored the solid-state structures of bromopentafluorobenzene (C6F5Br) using differential scanning calorimetry (DSC), variable-temperature powder X-ray diffraction (VT-PXRD), and single-crystal X-ray diffraction (SXD). DSC data initially indicated a single solid-state phase below the freezing point, but revealed additional weak transitions upon heating. The crystal structures of three solid-state phases have been solved. The SXD data showed that phases I and IV are centrosymmetric, whilst phase II is polar. However, the structure of phase III remains elusive due to the changing phase behaviour of C6F5Br that is determined as much as by kinetics as thermodynamics. The results underline the need for multiple analytical techniques to study non-covalent interactions and offer valuable data for refining computational models in crystal structure prediction and machine learning. A comparison with the iodinated counterpart is also made.

Ring-fused dimethoxybenzimidazole-benzimidazolequinone (DMBBQ): tunable halogenation and quinone formation using NaX/Oxone.

Ring-fused benzimidazolequinones are well-known anti-tumour agents, but dimeric ring-fused adducts are new. The alicyclic [1,2-a] ring-fused dimethoxybenzimidazole-benzimidazolequinone (DMBBQ) intermediate allows late-stage functionalization of bis-p-benzimidazolequinones. DMBBQs are chlorinated and brominated at the p-dimethoxybenzene site using nontoxic sodium halide and Oxone in HFIP/water. X-ray crystallography is used to rationalize site preference in terms of the discontinuity in conjugation in the DMBBQ system. Quinone formation occurs by increasing in situ halogen generation and water. Conversely, radical trifluoromethylation occurs at the quinone of the DMBBQ.

Influence of Solvent in Crystal Engineering: A Significant Change to the Order-Disorder Transition in Ferrocene.

We present the structure of a novel solvate adduct formed by dissolving ferrocene, FeCp2, in hexafluorobenzene, C6F6. This adduct demonstrates the remarkably strong interactions between the five-membered aromatic rings of FeCp2 and the six-membered aromatic ring of C6F6. These molecular interactions are sufficiently strong and anisotropic to change the temperature of the order-disorder transition of the ferrocene molecule from below ca. 164 K to RT. No solvate adduct could be formed between benzene and FeCp2. These observations will be of particular relevance to the crystal engineering community, whose goal is the design of solids with bespoke properties.

A new family of urea-based low molecular-weight organogelators for environmental remediation: the influence of structure.

Gelation processes grant access to a wealth of soft materials with tailorable properties, in applications as diverse as environmental remediation, biomedicine and electronics. Several classes of self-assembling gelators have been studied and employ non-covalent bonds to direct assembly, but recently attention has come to focus on how the overall shape of the gelator molecule impacts its gelation. Here we study a new sub-family of low molecular weight organogelators and explore how steric rearrangement influences their gelation. The gels produced are characterised with X-ray diffraction and small-angle neutron scattering (SANS) to probe their ex situ and in situ gelation mechanisms. The best examples were then tested for environmental remediation applications, gelling petrol and oils in the presence of water and salts.

Copper-doped CdSe/ZnS quantum dots: controllable photoactivated copper(I) cation storage and release vectors for catalysis.

The first photoactivated doped quantum dot vector for metal-ion release has been developed. A facile method for doping copper(I) cations within ZnS quantum dot shells was achieved through the use of metal-dithiocarbamates, with Cu(+) ions elucidated by X-ray photoelectron spectroscopy. Photoexcitation of the quantum dots has been shown to release Cu(+) ions, which was employed as an effective catalyst for the Huisgen [3+2] cycloaddition reaction. The relationship between the extent of doping, catalytic activity, and the fluorescence quenching was also explored.

Porous sulfur polymers for effective aqueous-phase organic contaminant removal.

Sulfur polymers produced through 'inverse vulcanization' exhibit various attributes, such as photocatalytic activity and a high capacity to adsorb heavy metals. Nevertheless, there is a lack of research investigating the use of sulfur polymers as materials for the removal of organic contaminants. In this work, porous sulfur polymers (PSPs) were synthesized from elemental sulfur and 1,3-diisopropenylbenzene, with porosity introduced via salt templating. The result is a material that can strongly adsorb and chemically neutralize a model organic contaminant (caffeine). PSPs show adsorption up to 5 times higher than a leading adsorption material (activated carbon). Furthermore, either the adsorption or degradation processes can govern the removal efficiency depending on the synthesis parameters of PSPs. This is the first-ever report demonstrating sulfur polymers as effective materials for removing emerging contaminants from water. The versatile synthesis of sulfur polymers offers variation, which means that there is much more to explore in this exciting research area.

X-Ray Visible Protein Scaffolds by Bulk Iodination.

Protein-based biomaterial use is expanding within medicine, together with the demand to visualize their placement and behavior in vivo. However, current medical imaging techniques struggle to differentiate between protein-based implants and surrounding tissue. Here a fast, simple, and translational solution for tracking transplanted protein-based scaffolds is presented using X-ray CT-facilitating long-term, non-invasive, and high-resolution imaging. X-ray visible scaffolds are engineered by selectively iodinating tyrosine residues under mild conditions using readily available reagents. To illustrate translatability, a clinically approved hernia repair mesh (based on decellularized porcine dermis) is labeled, preserving morphological and mechanical properties. In a mouse model of mesh implantation, implants retain marked X-ray contrast up to 3 months, together with an unchanged degradation rate and inflammatory response. The technique's compatibility is demonstrated with a range of therapeutically relevant protein formats including bovine, porcine, and jellyfish collagen, as well as silk sutures, enabling a wide range of surgical and regenerative medicine uses. This solution tackles the challenge of visualizing implanted protein-based biomaterials, which conventional imaging methods fail to differentiate from endogenous tissue. This will address previously unanswered questions regarding the accuracy of implantation, degradation rate, migration, and structural integrity, thereby accelerating optimization and safe translation of therapeutic biomaterials.

Improved tumour delivery of iron oxide nanoparticles for magnetic hyperthermia therapy of melanoma via ultrasound guidance and 111In SPECT quantification.

Magnetic field hyperthermia relies on the intra-tumoural delivery of magnetic nanoparticles by interstitial injection, followed by their heating on exposure to a remotely-applied alternating magnetic field (AMF). This offers a potential sole or adjuvant route to treating drug-resistant tumours for which no alternatives are currently available. However, two challenges in nanoparticle delivery currently hinder the effective clinical translation of this technology: obtaining enough magnetic material within the tumour to enable sufficient heating; and doing this accurately to limit or avoid damage to surrounding healthy tissue. A further complication is the lack of established methods to non-invasively quantify nanoparticle biodistribution, which is necessary to evaluate the performance of improved delivery strategies. Here we employ 111In radiolabelling and single-photon emission computed tomography (SPECT) to non-invasively quantify distribution of a clinical grade iron-oxide-based nanoparticle in a mouse model of melanoma. We show that compared to manual injection, ultrasound guided delivery together with syringe-pump-controlled infusion improves both the nanoparticle concentration within the tumour, and the accuracy of delivery - reducing off-target peri-tumoural delivery. Following AMF heating, injected melanomas shrank significantly compared to non-injected controls, validating therapeutic efficacy. Systemic off-target delivery was quantified and extrapolated to predict off-target energy absorbance within safe limits for the main sites of background accumulation. With many nanoparticle-based therapies currently in development for cancer, this image-guided delivery strategy has wide potential impact beyond the field of magnetic hyperthermia. Future use in representative patient cohorts would also be enabled by the high clinical availability of both SPECT and ultrasound imaging.

Single-crystal quality data from polycrystalline samples: finding the needle in the haystack.

Multi-grain crystallography, traditionally performed at synchrotron sources in association with high-pressure studies, has new relevance with respect to laboratory single-crystal X-ray diffraction, in which crystals can be grown rapidly in situ, and a preliminary dataset analysed and solved in a matter of minutes. Subsequently, a full-sphere of IUCr-quality data can then be collected in a few hours. To demonstrate the applicability of laboratory multi-grain crystallography with Cu Kα X-rays, co-crystals of hexafluorobenzene and pyrrole were grown rapidly by cooling a 1:1 liquid mixture in an X-ray capillary on the diffractometer. The software is able to identify a single unit cell from as few as 10% of the diffraction spots from a small number of diffraction frames. Once a unit cell is identified, a full crystal structure solution is rapidly obtained by collecting a small amount of data to a resolution of ca 1 Å. The co-crystal obtained from the 1:1 mixture showed that hexafluorobenzene and pyrrole crystallize in a 3:4 ratio, in contrast to the columnar 1:1 adduct structures typified by hexafluorobenzene and benzene. The generality of our multi-grain approach for samples that are liquid at room temperature (and form a polycrystalline solid mass on cooling) is further demonstrated by investigating and solving the 1:1 co-crystal formed between hexafluorobenzene and pyridine.

Metastatic Testicular Mixed Germ Cell Tumor Presenting as Posterior Scrotal Pain in the Emergency Department: A Case Report.

Testicular neoplasms, or testicular cancer, are not typically seen in the emergency department (ED) since their presentation involves a painless hard mass that emerges slowly over time. Uncommon presentation of testicular neoplasm to the ED with acute onset of scrotal pain may present challenges as an incomplete physical examination without supplemental imaging and laboratory workup may overlook the diagnosis of testicular neoplasm. As a result, a delay in proper treatment may occur. Early recognition of testicular neoplasm can decrease morbidity and mortality and improve overall patient survival. Here, we present a case of a 32-year-old male who presented in the ED with an acute onset of testicular pain localized on the posterior right side of the scrotum. Despite the unusual presentation, a complete physical examination, including a complete genitourinary system exam, was performed. During the physical examination, a high index of suspicion for testicular neoplasm was present. Necessary imaging and laboratory workup were ordered. Based on the findings, testicular neoplasm was highly suspected. Thus, surgical intervention was pursued to remove the suspicious mass and pathology revealed a mixed germ cell tumor. Further imaging and laboratory workup showed metastasis into other organ systems, and medical management was chosen to treat the metastatic neoplasm systemically.

Sustained release ocular drug delivery systems for glaucoma therapy.

INTRODUCTION: Glaucoma is a group of progressive optic neuropathies resulting in irreversible blindness. It is associated with an elevation of intraocular pressure (>21 mm Hg) and optic nerve damage. Reduction of the intraocular pressure (IOP) through the administration of ocular hypotensive eye drops is one of the most common therapeutic strategies. Patient adherence to conventional eye drops remains a major obstacle in preventing glaucoma progression. Additional problems emerge from inadequate patient education as well as local and systemic side effects associated with adminstering ocular hypotensive drugs. AREAS COVERED: Sustained-release drug delivery systems for glaucoma treatment are classified into extraocular systems including wearable ocular surface devices or multi-use (immediate-release) eye formulations (such as aqueous solutions, gels; ocular inserts, contact lenses, periocular rings, or punctual plugs) and intraocular drug delivery systems (such as intraocular implants, and microspheres for supraciliary drug delivery). EXPERT OPINION: Sustained release platforms for the delivery of ocular hypotensive drugs (small molecules and biologics) may improve patient adherence and prevent vision loss. Such innovations will only be widely adopted when efficacy and safety has been established through large-scale trials. Sustained release drug delivery can improve glaucoma treatment adherence and reverse/prevent vision deterioration. It is expected that these approaches will improve clinical management and prognosis of glaucoma.

An Insight into the Growing Concerns of Styrene Monomer and Poly(Styrene) Fragment Migration into Food and Drink Simulants from Poly(Styrene) Packaging.

Poly(styrene) (PS) has been heavily utilised in disposable food packaging due to its insulating properties, optical translucency, and long-shelf life. Despite these desirable characteristics, (PS) poses toxicity concerns to human's health through styrene monomer leaching into foodstuffs. Environmental and marine hazards are another growing concerns due to improper and/or absence of recycling strategies and facilities. This preliminary work aims to investigate the effect of temperature, food composition and contact times on the migration of the styrene monomer from poly(styrene) food contact materials into food simulants. Poly(styrene) cups showed a relatively low level of styrene migration with the highest being 0.110 µg/mL, whereas food containers showed a much higher level of styrene leaching with up to 6 µg/mL. This could be due to an increase in the hydrophobicity of the simulants' characteristics from low to high fat content and the increase in the testing temperatures from 5 °C to 70 °C. ANOVA statistical analysis is used to compare the means of three or more groups of data, whereas t-test analysis is used to compare means of two groups. This was carried out on each individual sample to determine the significance of changing the temperature, simulant type, or both on the level of migration observed in the results. All significant values were tested at 95% confidence level p < 0.05, concluding that fat content and high temperatures were found to significantly increase the level of styrene migration. Nile Red staining method was used to demonstrate that particulate poly(styrene), as well as styrene monomer, migrated into tested food simulants from typical containers, which is becoming a cause for concern as evidence of microplastic ingestion increases.

Recurrent priapism in the setting of cannabis use.

Priapism (persistent and painful erection of the penis) is a notable urological emergency, with over 90% of those remaining erect for 24 h losing sexual function. Drug-induced priapism is common in the adult population, with intracavernosal injectables for erectile dysfunction topping the list. A variety of illicit drugs associated with priapism have been described; however, we are not aware of any other case reports showing cannabis alone as the inciting factor. Here, we present a case of a healthy 32-year-old African American man with a history of stuttering (recurrent) priapism secondary to mild cannabis substance use without comorbid substance use, licit or illicit.

In situ formation of low molecular weight organogelators for slick solidification.

We have investigated the in situ formation of Low Molecular Weight Organogelator (LMWO) molecules in oil-on-water slicks through dual reactive precursor injection. This method alleviates the need for any carrier solvent or prior heating, therefore reducing the environmental impact of LMWOs, giving instantaneous gelation, even at low temperatures (-5 °C). We show minimal leaching from our gels into the water layer.

Exploring precision polymers to fine-tune magnetic resonance imaging properties of iron oxide nanoparticles.

The use of bio-polymers as stabilising agents for iron oxide-based negative magnetic resonance imaging (MRI) contrast agents has become popular in recent years, however the wide polydispersity of biologically-derived and commercially available polymers limits the ability to produce truly tuneable and reproducible behaviour, a major challenge in this area. In this work, stable colloids of iron oxide nanoparticles were prepared utilising precision-engineered bio-polymer mimics, poly(2-acrylamido-2-methylpropane sodium sulfonate) (P(AMPS)) polymers, with controlled narrow polydispersity molecular weights, as templating stabilisers. In addition to producing magnetic colloids with excellent MRI contrast capabilities (r2 values reaching 434.2 mM-1 s-1 at 25 °C and 23 MHz, several times higher than similar commercial analogues), variable field relaxometry provided unexpected important insights into the dynamic environment of the hydrated materials, and hence their exceptional MRI behaviour. Thanks to the polymer's templating backbone and flexible conformation in aqueous suspension, nanocomposites appear to behave as "multi-core" clustered species, enhancing interparticle interactions whilst retaining water diffusion, boosting relaxation properties at low frequency. This clustering behaviour, evidenced by small-angle X-ray scattering, and strong relaxometric response, was fine-tuned using the well-defined molecular weight polymer species with precise iron to polymer ratios. By also showing negligible haemolytic activity, these nanocomposites exhibit considerable potential for MRI diagnostics.

pH-Responsive nanocomposite fibres allowing MRI monitoring of drug release.

Magnetic resonance imaging (MRI) is one of the most widely-used non-invasive clinical imaging tools, producing detailed anatomical images whilst avoiding side effects such as trauma or X-ray radiation exposure. In this article, a new approach to non-invasive monitoring of drug release from a delivery vehicle via MRI was developed, using pH-responsive Eudragit L100 and S100 fibres encapsulating superparamagnetic iron oxide nanoparticles (SPIONs) and carmofur (a drug used in the treatment of colon cancer). Fibres were prepared by electrospinning, and found to be smooth and cylindrical with diameters of 645 ± 225 nm for L100 and 454 ± 133 nm for S100. The fibres exhibited pH responsive dissolution behaviour. Around the physiological pH range, clear pH-responsive proton relaxation rate changes due to matrix swelling/dissolution can be observed: r2 values of L100 fibres increase from 29.3 ± 8.3 to 69.8 ± 2.5 mM-1 s-1 over 3 h immersion in a pH 7.4 medium, and from 13.5 ± 2.0 mM-1 s-1 to 42.1 ± 3.0 mM-1 s-1 at pH 6.5. The r2 values of S100 fibres grow from 30.4 ± 4.4 to 64.7 ± 1.0 mM-1 s-1 at pH 7.4, but at pH 6.5, where the S100 fibres are not soluble, r2 remains very low (< 4 mM-1 s-1). These dramatic changes in relaxivity demonstrate that pH-responsive dissolution results in SPION release. In vitro drug release studies showed the formulations gave rapid release of carmofur at physiological pH values (pH 6.5 and 7.4), and acid stability studies revealed that they can protect the SPIONs from digestion in acid environments, giving the fibres potential for oral administration. Exploration of the relationship between relaxivity and carmofur release suggests a linear correlation (R2 > 0.94) between the two. Mathematical equations were developed to predict carmofur release in vitro, with very similar experimental and predicted release profiles obtained. Therefore, the formulations developed herein have the potential to be used for non-invasive monitoring of drug release in vivo, and could ultimately result in dramatic reductions to off-target side effects from interventions such as chemotherapy.

Surface Interactions and Mechanisms Study on the Removal of Iodide from Water by Use of Natural Zeolite-Based Silver Nanocomposites.

In this work a natural zeolite was modified with silver following two different methods to derive Ag2O and Ag0 nanocomposites. The materials were fully characterized and the results showed that both materials were decorated with nanoparticles of size of 5-25 nm. The natural and modified zeolites were used for the removal of iodide from aqueous solutions of initial concentration of 30-1400 ppm. Natural zeolite showed no affinity for iodide while silver forms were very efficient reaching a capacity of up to 132 mg/g. Post-adsorption characterizations showed that AgI was formed on the surface of the modified zeolites and the amount of iodide removed was higher than expected based on the silver content. A combination of experimental data and characterizations indicate that the excess iodide is most probably related to negatively charged AgI colloids and Ag-I complexes forming in the solution as well as on the surface of the modified zeolites.

Radio-metal cross-linking of alginate hydrogels for non-invasive in vivo imaging.

Alginate hydrogels are cross-linked polymers with high water content, tuneable chemical and material properties, and a range of biomedical applications including drug delivery, tissue engineering, and cell therapy. However, their similarity to soft tissue often renders them undetectable within the body using conventional bio-medical imaging techniques. This leaves much unknown about their behaviour in vivo, posing a challenge to therapy development and validation. To address this, we report a novel, fast, and simple method of incorporating the nuclear imaging radio-metal 111In into the structure of alginate hydrogels by utilising its previously-undescribed capacity as an ionic cross-linking agent. This enabled non-invasive in vivo nuclear imaging of hydrogel delivery and retention across the whole body, over time, and across a range of model therapies including: nasal and oral drug delivery, stem cell transplantation, and cardiac tissue engineering. This information will facilitate the development of novel therapeutic hydrogel formulations, encompassing alginate, across disease categories.

Surface radio-mineralisation mediates chelate-free radiolabelling of iron oxide nanoparticles.

We introduce the concept of surface radio-mineralisation (SRM) to describe the chelate-free radiolabelling of iron-oxide and ferrite nanoparticles. We demonstrate the effectiveness of SRM with both 111In and 89Zr for bare, polymer-matrix multicore, and surface-functionalised magnetite/maghemite nanoparticles; and for bare Y3Fe5O12 nanoparticles. By analogy with geological mineralisation (the hydrothermal deposition of metals as minerals in ore bodies or lodes) we demonstrate that the heat-induced and aqueous SRM process deposits radiometal-oxides onto the nanoparticle or core surfaces, passing through the matrix or coating if present, without changing the size, structure, or magnetic properties of the nanoparticle or core. We show in a mouse model followed over 7 days that the SRM is sufficient to allow quantitative, non-invasive, prolonged, whole-body localisation of injected nanoparticles with nuclear imaging.

Cured by Da Vinci Xi: meticulous dissection of an infected urachal cyst presenting with lower urinary tract symptoms in an adult.

An unusual finding in an adult patient with an infected urachal cyst, was treated surgically using the Da Vinci robot. A 26-year-old woman was admitted to our hospital with complaints of lower abdominal pain and burning sensation with urination. She was diagnosed with lower urinary tract infection, treatment did not help her symptoms and further evaluation of CT revealed complex enhancing mass superior to the urinary bladder. The differentials included inflammatory cause such as an abscess, neoplastic mass, urachal cyst, vitello intestinal fistula and urachal sinus. Da Vinchi robotic diagnostic laparoscopy was performed to obtain an accurate assessment and treatment. After cystoscopy followed by laparoscopic exploration of the abdominal and pelvic cavity further helped to narrow down a diagnosis of remnants of urachus. Pathology of the excised specimen showed inflammation without evidence of malignancy and confirmed Urachal cyst. The patient had an uneventful post-operative course.