Crystal structure of the catalytic domain of a bacterial cellulase belonging to family 5.

BACKGROUND: Cellulases are glycosyl hydrolases--enzymes that hydrolyze glycosidic bonds. They have been widely studied using biochemical and microbiological techniques and have attracted industrial interest because of their potential in biomass conversion and in the paper and textile industries. Glycosyl hydrolases have lately been assigned to specific families on the basis of similarities in their amino acid sequences. The cellulase endoglucanase A produced by Clostridium cellulolyticum (CelCCA) belongs to family 5. RESULTS: We have determined the crystal structure of the catalytic domain of CelCCA at a resolution of 2.4 A and refined it to 1.6 A. The structure was solved by the multiple isomorphous replacement method. The overall structural fold, (alpha/beta)8, belongs to the TIM barrel motif superfamily. The catalytic centre is located at the C-terminal ends of the beta strands; the aromatic residues, forming the substrate-binding site, are arranged along a long cleft on the surface of the globular enzyme. CONCLUSIONS: Strictly conserved residues within family 5 are described with respect to their catalytic function. The proton donor, Glu170, and the nucleophile, Glu307, are localized on beta strands IV and VII, respectively, and are separated by 5.5 A, as expected for enzymes which retain the configuration of the substrate's anomeric carbon. Structure determination of the catalytic domain of CelCCA allows a comparison with related enzymes belonging to glycosyl hydrolase families 2, 10 and 17, which also display an (alpha/beta)8 fold.

Thermodynamic study of the formation of adenine nucleotide-manganese complexes. I. "pH stat" titration method results.

The thermodynamics associated with the Mn2- -ATP, Mn-ADP- and Mn-AMP complex formation reactions determined from K potentiometric measurements at I = 0.2 are reported for the temperature range 1--45 degrees C. The K values increase with the length of the phosphate chain and with temperature. The limits and the best conditions for use of the "pH stat" titration method are discussed. Comparison with the results obtained by potentiometric and calorimetric methods in the case of Mg-nucleotide complexes is made.

Thermodynamic study of the formation of adenine nucleotide-manganese complexes. II. Calorimetric results.

Enthalpic variations in the formation of adenine nucleotide-manganese complexes, as measured by microcalorimetry, are reported. All the results are obtained in the temperature range 6--30 degrees C at I =0.2 and pH values 7.00 or 7.50. All the reactions are endothermic and the deltaH values increase with the length of the phosphate chain and with temperature. The deltaH values are compared with those previously obtained for adenine nucleotide-manganesium complexes. The comparison between calorimetric and potentiometric deltaH values is made. The divergence observed between these results at low temperature leads us to assume the formation of nucleotide aggregates induced by the presence of manganese ions. This hypothesis is confirmed by differential ultraviolet spectra.

Amino acid sequence and molecular modelling of a thermostable two (4Fe-4S) ferredoxin from the archaebacterium Methanococcus thermolithotrophicus.

The amino acid sequence of a two (4Fe-4S) ferredoxin from the methanogenic bacterium Methanococcus thermolithotrophicus (FdMt) has been determined. This thermostable protein comprises 60 amino acid residues (Mr 6541) and two (4Fe-4S) clusters chelated to the protein through the eight cysteines. FdMt contains a relatively high number of lysines [5], threonines [4] and valines [10]. The three-dimensional molecular model generated from the Peptococcus aerogenes X-ray structure keeps the characteristic overall ferredoxin folding thanks to complementary substitutions of residues of the hydrophobic core. The major structural features of the model are the different environments of both clusters, and the patch of three lysines at one end of the molecule. The possible role of several structural factors in the thermostability of the protein is discussed.

Crystal structure of a cohesin module from Clostridium cellulolyticum: implications for dockerin recognition.

In the assembly of the Clostridium cellulolyticum cellulosome, the multiple cohesin modules of the scaffolding protein CipC serve as receptors for cellulolytic enzymes which bear a dockerin module. The X-ray structure of a type I C. cellulolyticum cohesin module (Cc-cohesin) has been solved using molecular replacement, and refined at 2.0 A resolution. Despite a rather low sequence identity of 32 %, this module has a fold close to those of the two Clostridium thermocellum cohesin (Ct-cohesin) modules whose 3D structures have been determined previously. Cc-cohesin forms a dimer in the crystal, as do the two Ct-cohesins. We show here that the dimer exists in solution and that addition of dockerin-containing proteins dissociates the dimer. This suggests that the dimerization interface and the cohesin/dockerin interface may overlap. The nature of the overall surface and of the dimer interface of Cc-cohesin differ notably from those of the Ct-cohesin modules, being much less polar, and this may explain the species specificity observed in the cohesin/dockerin interaction of C. cellulolyticum and C. thermocellum. We have produced a topology model of a C. cellulolyticum dockerin and of a Cc-cohesin/dockerin complex using homology modeling and available biochemical data. Our model suggests that a special residue pair, already identified in dockerin sequences, is located at the center of the cohesin surface putatively interacting with the dockerin.

Solution structure of the module X2 1 of unknown function of the cellulosomal scaffolding protein CipC of Clostridium cellulolyticum.

Multidimensional, homo- and heteronuclear magnetic resonance spectroscopy combined with dynamical annealing has been used to determine the structure of a 94 residue module (X2 1) of the scaffolding protein CipC from the anaerobic bacterium Clostridium cellulolyticum. An experimental data set comprising 1647 nuclear Overhauser effect-derived restraints, 105 hydrogen bond restraints and 66 phi torsion angle restraints was used to calculate 20 converging final solutions. The calculated structures have an average rmsd about the mean structure of 0.55(+/-0.11) A for backbone atoms and 1.40(+/-0.11) A for all heavy atoms when fitted over the secondary structural elements. The X2 1 module has an immunoglobulin-like fold with two beta-sheets packed against each other. One sheet contains three strands, the second contains four strands. An additional strand is intercalated between the beta-sandwich, as well as two turns of a 3(.10) helix. X2 1 has a surprising conformational stability and may act as a conformational linker and solubility enhancer within the scaffolding protein. The fold of X2 1 is very similar to that of telokin, titin Ig domain, hemolin D2 domain, twitchin immunoglobulin domain and the first four domains of the IgSF portion of transmembrane cell adhesion molecule. As a consequence, the X2 1 module is the first prokaryotic member assigned to the I set of the immunoglobulin superfamily even though no sequence similarity with any member of this superfamily could be detected.

Crystallization and preliminary X-ray analysis of the catalytic domain of endoglucanase from Clostridium cellulolyticum.

The catalytic domain of an endoglucanase belonging to family A (CelCCA) from an anaerobic bacterium (Clostridium cellulolyticum) has been crystallized in a form suitable for X-ray diffraction analysis. The crystals have been grown in the presence of polyethylene glycol 4000 using the vapour diffusion technique. The crystals, which diffract to 2.0 A resolution, belong to the orthorhombic space group P2(1)2(1)2(1) and have the following cell constants: a = 52.4 A, b = 76.2 A and c = 113.5 A.

Cloning and sequencing of the locus encoding the large and small subunit genes of the periplasmic [NiFe]hydrogenase from Desulfovibrio fructosovorans.

The genetic locus encoding the periplasmic [NiFe]hydrogenase (Hyd) from Desulfovibrio fructosovorans was cloned and sequenced. The genes of this two-subunit enzyme have an operon organization in which the 0.94-kb gene encoding the small subunit precedes the 1.69-kb gene encoding the large subunit. A Shine-Dalgarno sequence is centered at -9 bp from the ATG of both subunits. The possible presence of another open reading frame downstream from the large-subunit-encoding gene is considered. The N-terminal sequence of the large 61-kDa subunit deduced from the nucleotide sequence is in perfect agreement with the results of the amino acid (aa) sequence determined by Edman degradation. A 50-aa leader peptide precedes the small 28-kDa subunit. The aa sequence of the enzyme shows nearly 65% homology with the [NiFe]Hyd aa sequence of Desulfovibrio gigas. Comparisons with a large range of Hyds from various bacterial species indicate the presence of highly conserved Cys residues, the implications of which are discussed from the point of view of nickel atom and cluster accommodation.

Cloning and expression of two cellulase genes of Clostridium cellulolyticum in Escherichia coli.

Two cellulase genes isolated from Clostridium cellulolyticum strain ATCC3519 were cloned in Escherichia coli using plasmid pACYC184. Plasmids pB52 and pB43 were isolated from the transformants producing carboxymethylcellulase (CMCase) and the two cloned CMCase-coding genes were found to be included in two EcoRI fragments of 5.7 kb and 2.6 kb, respectively. These two genes showed no homology. The CMCase-coding genes were found to be contained in a 1.8-kb KpnI-HindIII fragment and a 2.05-kb HindIII-PvuII fragment of the DNA donor strain. Expression of these genes in E. coli was found not to depend on their orientation in the cloning vector. Hybridization experiments between these two fragments and Clostridium thermocellum NCIB10682 DNA fragments carrying genes celA, celB, celC and celD were carried out and some homologies were detected.

Sequence analysis of the Clostridium cellulolyticum endoglucanase-A-encoding gene, celCCA.

The nucleotide sequence of a Clostridium cellulolyticum endo-beta-1,4- glucanase (EGCCA)-encoding gene (celCCA) and its flanking regions, was determined. An open reading frame (ORF) of 1425 bp was found, encoding a protein of 475 amino acids (aa). This ORF began with an ATG start codon and ended with a TAA ochre stop codon. The N-terminal region of the EGCCA protein resembled a typical signal sequence of a Gram-positive bacterial extracellular protein. A putative signal peptidase cleavage site was determined. EGCCA, without a signal peptide, was found to be composed of more than 35% hydrophobic aa and to have an Mr of 50715. Comparison of the encoded sequence with other known cellulase sequences showed the existence of various kinds of aa sequence homologies. First, a strong homology was found between the C-terminal region of EGCCA, containing a reiterated stretch of 24 aa, and the conserved reiterated region previously found to exist in four Clostridium thermocellum endoglucanases and one xylanase from the same organism. This region was suspected of playing a role in organizing the cellulosome complex. Second, an extensive homology was found between EGCCA and the N-terminal region of the large endoglucanase, EGE, from C. thermocellum, which suggests that they may have a common ancestral gene. Third, a region, which extended for 21 aa residues beginning at aa + 127, was found to be homologous with regions of cellulases belonging to Bacilli, Clostridia and Erwinia chrysanthemi.

Sequence analysis of a gene cluster encoding cellulases from Clostridium cellulolyticum.

The sequence of a 5633-bp EcoRI-PvuII DNA fragment from Clostridium cellulolyticum was determined. This fragment contains two complete endo-beta-1,4-glucanase-encoding genes, designated celCCC and celCCG. These two genes are flanked by two other partial open reading frames (ORF1 and celCCE) that probably encode two cellulases or related enzymes. The celCCC and celCCG genes appear to be present in a polycistronic transcriptional unit. Northern blot hybridisations with intragenic probes derived from celCCC and celCCG gave similar patterns. Two transcripts of about 5 and 6 kb were identified. The celCCC and celCCG ORFs extend over 1380 bp and 2175 bp, respectively. They are separated by only 87 nt. A typical signal sequence is present at the N terminus of the deduced polypeptides. The mature CelCCC and CelCCG proteins have M(r)s 47,201 and 76,101, respectively. Comparisons between their amino acid (aa) sequences and other known cellulase sequences revealed that: first, they both contain the repeated 24-aa sequence characteristic of clostridial beta-glycanases, secondly, the N-terminal catalytic domains of CelCCC and CelCCG can be classified into the D and E2 families, respectively, and thirdly, the largest CelCCG contains an additional internal domain which is very similar to that of the Bacillus-type cellulose-binding domain (CBD). The ORF1-C-terminal-encoded sequence also contains the clostridial 24-aa repeat. The CelCCE N-terminus consists of a typical signal sequence followed by a 168-aa domain homologous to the N-terminal repeated domain of Cellulomonas fimi CenC. This domain is connected to an incomplete catalytic domain of family E1 by a Pro-rich junction linker.

Thermodynamic studies of binding proteins: effects of temperature variations on substrate binding and conformation of the leucine-isoleucine-valine binding protein of Escherichia coli.

The behaviour of the Leucine isoleucine Valine binding protein of Escherichia coli as a function of temperature has been examined. Substrate binding measurements showed a temperature dependence of the leucine-isoleucine-valine binding protein leucine complex formation constants. The protein-substrate complex was completely dissociated beyond 70 degrees C. In the range 5-65 degrees C the protein remained active but Van't Hoff's plots indicated changes of the reaction thermodynamic parameters. Large negative delta Cp values (--2.25 kJ mole-1 K-1 between 5 and 40 degrees C and--9.40 above 40 degrees C) indicate important substrate induced modifications of the protein conformation. Scanning calorimetry of the leucine isoleucine valine binding protein before and after addition of leucine was also performed. Two thermal events were recorded when the protein was substratefree and only one, at a higher temperature and more important, when the substrate was added. The results of these two approaches were in agreement in that both methods suggested a binding dependent conformational change of the protein which resulted in a greater stability of its structure.

Biphasic saturations of binding proteins can be the result of a competitive inhibition of substrate fixation.

A mathematical model is proposed which explains some biphasic saturations of Binding Proteins by their substrates through an effect of a competitive inhibition. The inhibitor can be the substrate itself especially when the retention phenomenon is occuring. This model has been verified with two periplasmic Binding Proteins of Escherichia coli: the Glutamine Binding Protein and the Leucine-Isoleucine-Valine Binding Protein. A significant connection is found between experimental results and the hypothesis.

The cellulolytic system of Clostridium cellulolyticum.

Recent findings on the cellulolytic system of the mesophilic Clostridium cellulolyticum are reviewed. Six cellulases and the scaffolding protein, which are, at the present time, the known components of the cellulosome have been cloned. The catalytic and structural properties of the cloned enzymes CelA, CelC, CelD and CelF are described. It was shown that the grafting of the cellulases onto the scaffolding protein was performed using the dockerin-cohesin attachment device and was strictly dependent on the integrity of both components of the complex. The amino-acid sequences of dockerin and cohesin domains of C. cellulolyticum were compared to that of C. cellulovorans and C. thermocellum. This sequence analysis shows that domains belonging to the thermophilic or the mesophilic bacteria can be placed into two well defined groups. The genetic organization of the gene cluster of C. cellulolyticum is discussed.

[Growth yield and active biomass in anaerobic biotopes]. / Le rendement de la croissance et la biomasse active dans les biotopes anaérobies.

The molecular growth yield of anaerobic bacteria has been examined in different growth conditions. The influence of kinetics on energy coupling has been discussed.

Microcalorimetric study of the anaerobic growth of Escherichia coli: growth thermograms in a synthetic medium.

A microcalorimetric technique was used for studying the growth of Escherichia coli during anaerobiosis. The growth thermograms obtained are complex and the shape of curves is dependent on the hydrogen lyase activity of the cells. Fermentation balances are given for different culture conditions, and simple growth thermograms are obtained when the hydrogen lyase activity is inhibitied.

Microcalorimetric study of the anaerobic growth of Escherichia coli: measurements of the affinity of whole cells for various energy substrates.

Microcalorimetry has been used to determine the affinity of whole cells of Escherichia coli for glucose, galactose, fructose, and lactose. Anaerobic growth thermograms were analyzed, and the Km and Vmax values for these energy substrates were measured at pH 7.8. Results obtained with this technique using various organisms growing anaerobically on different sugars are compared. This comparison shows that in practically all cases the cellular rate of catabolic activity is a hyperbolic function of the energy substrate concentrations at low sugar concentrations. In some cases this technique also allows determination of kinetics at high sugar concentrations.

Microcalorimetric study of Escherichia coli aerobic growth: theoretical aspects of growth on succinic acid.

Two methods of investigation were used to evaluate the heat quantity associated with anabolic processes (qan) during the aerobic growth of Escherichia coli in a minimal medium containing succinic acid as the sole energy and carbon source. The study of the contribution of biosynthetic reactions from succinic acid and ammonia were investigated by both methods. The two qan values obtained were in excellent agreement and were found to be significant. Thus it was demonstrated that the contribution of anabolism strongly influenced the quantity of heat associated with microbial aerobic growth. The qan calculated as above explained the experimental enthalpy change which was recently reported.

Microcalorimetric study of cellulose degradation by Cellulomonas uda ATCC 21399.

A newly designed batch calorimeter was used to investigate the degradability of some celluloses having varying degrees of crystallinity. The PTC of an aerobic culture of Cellulomonas uda ATCC 21399 obtained revealed a diauxic growth which is attributed to the presence of hemicellulose contaminating Avicel and MN300 cellulose. The microcrystalline celluloses used were not completely utilized, whereas amorphous cellulose was easily metabolized, indicating that under the growth conditions used here, the physical structure of cellulose strongly influenced its microbial degradability. An equivalent growth yield of ca. 0.44 g/g was found with all the substrates used. The heat evolved by metabolism of 1 g cellulose was -5.86 kJ/g, a value similar to that obtained with glucose culture. The growth rate was the only variable parameter. The data obtained showed as expected that the hydrolysis product of cellulose was consumed in the same way as that of glucose and that the only limiting factor to the biodegradability of cellulose was the breakdown of the polymeric substrate. It is concluded that data obtained with glucose metabolism can be used to evaluate the extent of cellulose degradation.