Dual quantum spin Hall insulator by density-tuned correlations in TaIrTe4.

The convergence of topology and correlations represents a highly coveted realm in the pursuit of new quantum states of matter1. Introducing electron correlations to a quantum spin Hall (QSH) insulator can lead to the emergence of a fractional topological insulator and other exotic time-reversal-symmetric topological order2-8, not possible in quantum Hall and Chern insulator systems. Here we report a new dual QSH insulator within the intrinsic monolayer crystal of TaIrTe4, arising from the interplay of its single-particle topology and density-tuned electron correlations. At charge neutrality, monolayer TaIrTe4 demonstrates the QSH insulator, manifesting enhanced nonlocal transport and quantized helical edge conductance. After introducing electrons from charge neutrality, TaIrTe4 shows metallic behaviour in only a small range of charge densities but quickly goes into a new insulating state, entirely unexpected on the basis of the single-particle band structure of TaIrTe4. This insulating state could arise from a strong electronic instability near the van Hove singularities, probably leading to a charge density wave (CDW). Remarkably, within this correlated insulating gap, we observe a resurgence of the QSH state. The observation of helical edge conduction in a CDW gap could bridge spin physics and charge orders. The discovery of a dual QSH insulator introduces a new method for creating topological flat minibands through CDW superlattices, which offer a promising platform for exploring time-reversal-symmetric fractional phases and electromagnetism2-4,9,10.

Layer Hall effect in a 2D topological axion antiferromagnet.

Whereas ferromagnets have been known and used for millennia, antiferromagnets were only discovered in the 1930s1. At large scale, because of the absence of global magnetization, antiferromagnets may seem to behave like any non-magnetic material. At the microscopic level, however, the opposite alignment of spins forms a rich internal structure. In topological antiferromagnets, this internal structure leads to the possibility that the property known as the Berry phase can acquire distinct spatial textures2,3. Here we study this possibility in an antiferromagnetic axion insulator-even-layered, two-dimensional MnBi2Te4-in which spatial degrees of freedom correspond to different layers. We observe a type of Hall effect-the layer Hall effect-in which electrons from the top and bottom layers spontaneously deflect in opposite directions. Specifically, under zero electric field, even-layered MnBi2Te4 shows no anomalous Hall effect. However, applying an electric field leads to the emergence of a large, layer-polarized anomalous Hall effect of about 0.5e2/h (where e is the electron charge and h is Planck's constant). This layer Hall effect uncovers an unusual layer-locked Berry curvature, which serves to characterize the axion insulator state. Moreover, we find that the layer-locked Berry curvature can be manipulated by the axion field formed from the dot product of the electric and magnetic field vectors. Our results offer new pathways to detect and manipulate the internal spatial structure of fully compensated topological antiferromagnets4-9. The layer-locked Berry curvature represents a first step towards spatial engineering of the Berry phase through effects such as layer-specific moiré potential.

Axion optical induction of antiferromagnetic order.

Using circularly polarized light to control quantum matter is a highly intriguing topic in physics, chemistry and biology. Previous studies have demonstrated helicity-dependent optical control of chirality and magnetization, with important implications in asymmetric synthesis in chemistry; homochirality in biomolecules; and ferromagnetic spintronics. We report the surprising observation of helicity-dependent optical control of fully compensated antiferromagnetic order in two-dimensional even-layered MnBi2Te4, a topological axion insulator with neither chirality nor magnetization. To understand this control, we study an antiferromagnetic circular dichroism, which appears only in reflection but is absent in transmission. We show that the optical control and circular dichroism both arise from the optical axion electrodynamics. Our axion induction provides the possibility to optically control a family of [Formula: see text]-symmetric antiferromagnets ([Formula: see text], inversion; [Formula: see text], time-reversal) such as Cr2O3, even-layered CrI3 and possibly the pseudo-gap state in cuprates. In MnBi2Te4, this further opens the door for optical writing of a dissipationless circuit formed by topological edge states.

Massive Dirac fermions in a ferromagnetic kagome metal.

The kagome lattice is a two-dimensional network of corner-sharing triangles that is known to host exotic quantum magnetic states. Theoretical work has predicted that kagome lattices may also host Dirac electronic states that could lead to topological and Chern insulating phases, but these states have so far not been detected in experiments. Here we study the d-electron kagome metal Fe3Sn2, which is designed to support bulk massive Dirac fermions in the presence of ferromagnetic order. We observe a temperature-independent intrinsic anomalous Hall conductivity that persists above room temperature, which is suggestive of prominent Berry curvature from the time-reversal-symmetry-breaking electronic bands of the kagome plane. Using angle-resolved photoemission spectroscopy, we observe a pair of quasi-two-dimensional Dirac cones near the Fermi level with a mass gap of 30 millielectronvolts, which correspond to massive Dirac fermions that generate Berry-curvature-induced Hall conductivity. We show that this behaviour is a consequence of the underlying symmetry properties of the bilayer kagome lattice in the ferromagnetic state and the atomic spin-orbit coupling. This work provides evidence for a ferromagnetic kagome metal and an example of emergent topological electronic properties in a correlated electron system. Our results provide insight into the recent discoveries of exotic electronic behaviour in kagome-lattice antiferromagnets and may enable lattice-model realizations of fractional topological quantum states.

A Data Set Comparison Method Using Noise Statistics Applied to VUV Spectrum Match Determinations.

It has been demonstrated that a pair of spectra exhibiting a coefficient of determination (R2) as low as 0.976 can originate from the same chemical species in one example, while a different pair of spectra exhibiting an R2 up to 0.9997 can originate from different chemical species. The R2 between spectra overlays depends on the signal-to-noise ratio, while the residual between any two spectra should look like noise only when the two spectra originate from the same chemical species. Numerical characteristics of the residual between two high-resolution spectra are invaluable toward the definitive elimination of many plausible matches of reference spectra to the sample spectra of analytes eluted from two-dimensional gas chromatography. Additionally, numerical characteristics beyond R2 facilitate a logical ranking of all plausible matches, making positive identification of a single-component analyte possible provided a reference spectrum exists for all plausible matches. Specifically, the experimental background noise is shown to follow a Gaussian distribution at all wavelengths, and a method is described to normalize the data such that the numerically adjusted noise distributions are independent of wavelength. The differences between matching spectra are further shown to exhibit numerical characteristics consistent with the background noise's Gaussian distribution, common to all wavelengths. Seven criteria are described for judging the similarity between spectra: R2 between the two spectra, R2 of a Q-Q plot with one axis being ideal Gaussian quantiles and the other axis being the distribution of the numerically adjusted residual quantiles, the maximum count of consecutive (by wavelength) signs in the residual, and the first four moments of the residuals. One exemplar application of the methodology is a definitive match of n-undecane, n-dodecane, and n-tridecane sample spectra to their corresponding reference spectrum, which is among the most challenging set of species within the volatility range of jet fuel to differentiate by spectral methods. While this example is a significant stress test of the approach, the utility of the methodology generally is in the subtle math and transparent criteria that unambiguously identify mismatches because the distributions of residuals between mismatching spectra are very clearly not Gaussian and have a high consecutive sign count, even in cases where the R2 between the compared spectra is ambiguous.

Dirac fermions and flat bands in the ideal kagome metal FeSn.

A kagome lattice of 3d transition metal ions is a versatile platform for correlated topological phases hosting symmetry-protected electronic excitations and magnetic ground states. However, the paradigmatic states of the idealized two-dimensional kagome lattice-Dirac fermions and flat bands-have not been simultaneously observed. Here, we use angle-resolved photoemission spectroscopy and de Haas-van Alphen quantum oscillations to reveal coexisting surface and bulk Dirac fermions as well as flat bands in the antiferromagnetic kagome metal FeSn, which has spatially decoupled kagome planes. Our band structure calculations and matrix element simulations demonstrate that the bulk Dirac bands arise from in-plane localized Fe-3d orbitals, and evidence that the coexisting Dirac surface state realizes a rare example of fully spin-polarized two-dimensional Dirac fermions due to spin-layer locking in FeSn. The prospect to harness these prototypical excitations in a kagome lattice is a frontier of great promise at the confluence of topology, magnetism and strongly correlated physics.

Influence of iron doping on tetravalent nickel content in catalytic oxygen evolving films.

Iron doping of nickel oxide films results in enhanced activity for promoting the oxygen evolution reaction (OER). Whereas this enhanced activity has been ascribed to a unique iron site within the nickel oxide matrix, we show here that Fe doping influences the Ni valency. The percent of Fe3+ doping promotes the formation of formal Ni4+, which in turn directly correlates with an enhanced activity of the catalyst in promoting OER. The role of Fe3+ is consistent with its behavior as a superior Lewis acid.

Low-Temperature Growth of Carbon Nanotubes Catalyzed by Sodium-Based Ingredients.

Synthesis of low-dimensional carbon nanomaterials such as carbon nanotubes (CNTs) is a key driver for achieving advances in energy storage, computing, and multifunctional composites, among other applications. Here, we report high-yield thermal chemical vapor deposition (CVD) synthesis of CNTs catalyzed by reagent-grade common sodium-containing compounds, including NaCl, NaHCO3 , Na2 CO3 , and NaOH, found in table salt, baking soda, and detergents, respectively. Coupled with an oxidative dehydrogenation reaction to crack acetylene at reduced temperatures, Na-based nanoparticles have been observed to catalyze CNT growth at temperatures below 400 °C. Ex situ and in situ transmission electron microscopy (TEM) reveal unique CNT morphologies and growth characteristics, including a vaporizing Na catalyst phenomenon that we leverage to create CNTs without residual catalyst particles for applications that require metal-free CNTs. Na is shown to synthesize CNTs on numerous substrates, and as the first alkali group metal catalyst demonstrated for CNT growth, holds great promise for expanding the understanding of nanocarbon synthesis.

Large Photothermal Effect in Sub-40 nm h-BN Nanostructures Patterned Via High-Resolution Ion Beam.

The controlled nanoscale patterning of 2D materials is a promising approach for engineering the optoelectronic, thermal, and mechanical properties of these materials to achieve novel functionalities and devices. Herein, high-resolution patterning of hexagonal boron nitride (h-BN) is demonstrated via both helium and neon ion beams and an optimal dosage range for both ions that serve as a baseline for insulating 2D materials is identified. Through this nanofabrication approach, a grating with a 35 nm pitch, individual structure sizes down to 20 nm, and additional nanostructures created by patterning crystal step edges are demonstrated. Raman spectroscopy is used to study the defects induced by the ion beam patterning and is correlated to scanning probe microscopy. Photothermal and scanning near-field optical microscopy measure the resulting near-field absorption and scattering of the nanostructures. These measurements reveal a large photothermal expansion of nanostructured h-BN that is dependent on the height to width aspect ratio of the nanostructures. This effect is attributed to the large anisotropy of the thermal expansion coefficients of h-BN and the nanostructuring implemented. The photothermal expansion should be present in other van der Waals materials with large anisotropy and can lead to applications such as nanomechanical switches driven by light.

Development of high throughput, high precision synthesis platforms and characterization methodologies for toxicological studies of nanocellulose.

Cellulose is one of the most abundant natural polymers, is readily available, biodegradable, and inexpensive. Recently, interest is growing around nanoscale cellulose due to the sustainability of these materials, the novel properties, and the overall low environmental impact. The rapid expansion of nanocellulose uses in various applications makes the study of the toxicological properties of these materials of great importance to public health regulators. However, most of the current toxicological studies are highly conflicting, inconclusive, and contradictory. The major reasons for these discrepancies are the lack of standardized methods to produce industry-relevant reference nanocellulose and relevant characterization that will expand beyond the traditional cellulose characterization for applications. In order to address these issues, industry-relevant synthesis platforms were developed to produce nanocellulose of controlled properties that can be used as reference materials in toxicological studies. Herein, two types of nanocellulose were synthesized, cellulose nanofibrils (CNF) and cellulose nanocrystals (CNC) using the friction grinding platform and an acid hydrolysis approach respectively. The nanocellulose structures were characterized extensively regarding their physicochemical properties, including testing for endotoxins and bacteria contamination.

Cu2IrO3: A New Magnetically Frustrated Honeycomb Iridate.

We present the first copper iridium binary metal oxide with the chemical formula Cu2IrO3. The material is synthesized from the parent compound Na2IrO3 by a topotactic reaction where sodium is exchanged with copper under mild conditions. Cu2IrO3 has the same monoclinic space group (C2/c) as Na2IrO3 with a layered honeycomb structure. The parent compound Na2IrO3 is proposed to be relevant to the Kitaev spin liquid on the basis of having Ir4+ with an effective spin of 1/2 on a honeycomb lattice. Remarkably, whereas Na2IrO3 shows a long-range magnetic order at 15 K and fails to become a true spin liquid, Cu2IrO3 remains disordered until 2.7 K, at which point a short-range order develops. Rietveld analysis shows less distortions in the honeycomb structure of Cu2IrO3 with bond angles closer to 120° compared to Na2IrO3. Thus, the weak short-range magnetism combined with the nearly ideal honeycomb structure places Cu2IrO3 closer to a Kitaev spin liquid than its predecessors.

Effect of nanoscale flows on the surface structure of nanoporous catalysts.

The surface structure and composition of a multi-component catalyst are critical factors in determining its catalytic performance. The surface composition can depend on the local pressure of the reacting species, leading to the possibility that the flow through a nanoporous catalyst can affect its structure and reactivity. Here, we explore this possibility for oxidation reactions on nanoporous gold, an AgAu bimetallic catalyst. We use microscopy and digital reconstruction to obtain the morphology of a two-dimensional slice of a nanoporous gold sample. Using lattice Boltzmann fluid dynamics simulations along with thermodynamic models based on first-principles total-energy calculations, we show that some sections of this sample have low local O2 partial pressures when exposed to reaction conditions, which leads to a pure Au surface in these regions, instead of the active bimetallic AgAu phase. We also explore the effect of temperature on the surface structure and find that moderate temperatures (≈300-450 K) should result in the highest intrinsic catalytic performance, in apparent agreement with experimental results.

A comparison of network sampling designs for a hidden population of drug users: Random walk vs. respondent-driven sampling.

Both random walk and respondent-driven sampling (RDS) exploit social networks and may reduce biases introduced by earlier methods for sampling from hidden populations. Although RDS has become much more widely used by social researchers than random walk (RW), there has been little discussion of the tradeoffs in choosing RDS over RW. This paper compares experiences of implementing RW and RDS to recruit drug users to a network-based study in Houston, Texas. Both recruitment methods were implemented over comparable periods of time, with the same population, by the same research staff. RDS methods recruited more participants with less strain on staff. However, participants recruited through RW were more forthcoming than RDS participants in helping to recruit members of their social networks. Findings indicate that, dependent upon study goals, researchers' choice of design may influence participant recruitment, participant commitment, and impact on staff, factors that may in turn affect overall study success.

Reasons People Give for Using (or Not Using) Condoms.

Study participants (N = 348) were asked about 46 reasons that have been suggested for why people use or do not use condoms. Participants were asked which of these reasons motivated them when they were deciding whether to use condoms in 503 sexual relationships. Participants were classified into one of three roles based on their HIV status and the status of each sexual partner: HIV+ people with HIV- partners; HIV- people with HIV+ partners; and HIV- people with HIV- partners. Motivations were looked at in the context of each of these roles. Of the 46 reasons, only 15 were selected by at least 1/3 of the participants, and only seven were selected by at least half. Frequently reported reasons primarily concern protecting self and partner from STDs including HIV. Less frequently reported reasons involved social norms, effects of condoms on sex, and concern for the relationship. These findings have implications for clinical interventions.

Facet-Selective Epitaxy of Compound Semiconductors on Faceted Silicon Nanowires.

Integration of compound semiconductors with silicon (Si) has been a long-standing goal for the semiconductor industry, as direct band gap compound semiconductors offer, for example, attractive photonic properties not possible with Si devices. However, mismatches in lattice constant, thermal expansion coefficient, and polarity between Si and compound semiconductors render growth of epitaxial heterostructures challenging. Nanowires (NWs) are a promising platform for the integration of Si and compound semiconductors since their limited surface area can alleviate such material mismatch issues. Here, we demonstrate facet-selective growth of cadmium sulfide (CdS) on Si NWs. Aberration-corrected transmission electron microscopy analysis shows that crystalline CdS is grown epitaxially on the {111} and {110} surface facets of the Si NWs but that the Si{113} facets remain bare. Further analysis of CdS on Si NWs grown at higher deposition rates to yield a conformal shell reveals a thin oxide layer on the Si{113} facet. This observation and control experiments suggest that facet-selective growth is enabled by the formation of an oxide, which prevents subsequent shell growth on the Si{113} NW facets. Further studies of facet-selective epitaxial growth of CdS shells on micro-to-mesoscale wires, which allows tuning of the lateral width of the compound semiconductor layer without lithographic patterning, and InP shell growth on Si NWs demonstrate the generality of our growth technique. In addition, photoluminescence imaging and spectroscopy show that the epitaxial shells display strong and clean band edge emission, confirming their high photonic quality, and thus suggesting that facet-selective epitaxy on NW substrates represents a promising route to integration of compound semiconductors on Si.

Quantum-Spillover-Enhanced Surface-Plasmonic Absorption at the Interface of Silver and High-Index Dielectrics.

We demonstrate an unexpectedly strong surface-plasmonic absorption at the interface of silver and high-index dielectrics based on electron and photon spectroscopy. The measured bandwidth and intensity of absorption deviate significantly from the classical theory. Our density-functional calculation well predicts the occurrence of this phenomenon. It reveals that due to the low metal-to-dielectric work function at such interfaces, conduction electrons can display a drastic quantum spillover, causing the interfacial electron-hole pair production to dominate the decay of surface plasmons. This finding can be of fundamental importance in understanding and designing quantum nanoplasmonic devices that utilize noble metals and high-index dielectrics.

Mammographic microcalcifications and breast cancer tumorigenesis: a radiologic-pathologic analysis.

BACKGROUND: Microcalcifications (MCs) are tiny deposits of calcium in breast soft tissue. Approximately 30% of early invasive breast cancers have fine, granular MCs detectable on mammography; however, their significance in breast tumorigenesis is controversial. This study had two objectives: (1) to find associations between mammographic MCs and tumor pathology, and (2) to compare the diagnostic value of mammograms and breast biopsies in identifying malignant MCs. METHODS: A retrospective chart review was performed for 937 women treated for breast cancer during 2000-2012 at St. Michael's Hospital. Demographic information (age and menopausal status), tumor pathology (size, histology, grade, nodal status and lymphovascular invasion), hormonal status (ER and PR), HER-2 over-expression and presence of MCs were collected. Chi-square tests were performed for categorical variables and t-tests were performed for continuous variables. All p-values less than 0.05 were considered statistically significant. RESULTS: A total of 937 patient charts were included. About 38.3% of the patients presented with mammographic MCs on routine mammographic screening. Patients were more likely to have MCs if they were HER-2 positive (52.9%; p < 0.001). There was a significant association between MCs and peri-menopausal status with a mean age of 50 (64%; p = 0.012). Patients with invasive ductal carcinomas (40.9%; p = 0.001) were more likely to present with MCs than were patients with other tumor histologies. Patients with a heterogeneous breast density (p = 0.031) and multifocal breast disease (p = 0.044) were more likely to have MCs on mammograms. There was a positive correlation between MCs and tumor grade (p = 0.057), with grade III tumors presenting with the most MCs (41.3%). A total of 52.2% of MCs were missed on mammograms which were visible on pathology (p < 0.001). CONCLUSION: This is the largest study suggesting the appearance of MCs on mammograms is strongly associated with HER-2 over-expression, invasive ductal carcinomas, peri-menopausal status, heterogeneous breast density and multifocal disease.

Coaxial multishell nanowires with high-quality electronic interfaces and tunable optical cavities for ultrathin photovoltaics.

Silicon nanowires (NWs) could enable low-cost and efficient photovoltaics, though their performance has been limited by nonideal electrical characteristics and an inability to tune absorption properties. We overcome these limitations through controlled synthesis of a series of polymorphic core/multishell NWs with highly crystalline, hexagonally-faceted shells, and well-defined coaxial (p/n) and p/intrinsic/n (p/i/n) diode junctions. Designed 200-300 nm diameter p/i/n NW diodes exhibit ultralow leakage currents of approximately 1 fA, and open-circuit voltages and fill-factors up to 0.5 V and 73%, respectively, under one-sun illumination. Single-NW wavelength-dependent photocurrent measurements reveal size-tunable optical resonances, external quantum efficiencies greater than unity, and current densities double those for silicon films of comparable thickness. In addition, finite-difference-time-domain simulations for the measured NW structures agree quantitatively with the photocurrent measurements, and demonstrate that the optical resonances are due to Fabry-Perot and whispering-gallery cavity modes supported in the high-quality faceted nanostructures. Synthetically optimized NW devices achieve current densities of 17 mA/cm(2) and power-conversion efficiencies of 6%. Horizontal integration of multiple NWs demonstrates linear scaling of the absolute photocurrent with number of NWs, as well as retention of the high open-circuit voltages and short-circuit current densities measured for single NW devices. Notably, assembly of 2 NW elements into vertical stacks yields short-circuit current densities of 25 mA/cm(2) with a backside reflector, and simulations further show that such stacking represents an attractive approach for further enhancing performance with projected efficiencies of > 15% for 1.2 µm thick 5 NW stacks.

Probing the low-temperature water-gas shift activity of alkali-promoted platinum catalysts stabilized on carbon supports.

We report on the direct promotional effect of sodium on the water-gas shift activity of platinum supported on oxygen-free multiwalled carbon nanotubes. Whereas the Na-free Pt catalysts are shown to be completely inactive, the addition of sodium is found to improve the water-gas shift activity to levels comparable to those obtained with highly active Pt catalysts on metal oxide supports. The structure and morphology of the catalyst surface was followed using aberration-corrected HAADF-STEM, which showed that atomically dispersed platinum species are stabilized by the addition of sodium. In situ atmospheric-pressure X-ray photoelectron spectroscopy (AP-XPS) experiments demonstrated that oxidized platinum Pt-OHx contributions in the Pt 4f signal are higher in the presence of sodium, providing evidence for a previously reported active-site structure of the form Pt-Nax-Oy-(OH)z. Pt remained oxidized in all redox experiments, even when a H2-rich gas mixture was used, but the extent of its oxidation followed the oxidation potential of the gas. These findings offer new insights into the nature of the active platinum-based site for the water-gas shift reaction. A strong inhibitory effect of hydrogen was observed on the reaction kinetics, effectively raising the apparent activation energy from 70 ± 5 kJ/mol (in product-free gas) to 105 ± 7 kJ/mol (in full reformate gas). Increased hydrogen uptake was observed on these materials when both Pt and Na were present on the catalyst, suggesting that hydrogen desorption might limit the water-gas shift reaction rate under such conditions.