Capillary electrophoresis method to determine siRNA complexation with cationic liposomes.

Small interfering RNA (siRNA) inducing gene silencing has great potential to treat many human diseases. To ensure effective siRNA delivery, it must be complexed with an appropriate vector, generally nanoparticles. The nanoparticulate complex requires an optimal physiochemical characterization and the complexation efficiency has to be precisely determined. The methods usually used to measure complexation in gel electrophoresis and RiboGreen® fluorescence-based assay. However, those approaches are not automated and present some drawbacks such as the low throughput and the use of carcinogenic reagents. The aim of this study is to develop a new simple and fast method to accurately quantify the complexation efficiency. In this study, capillary electrophoresis (CE) was used to determine the siRNA complexation with cationic liposomes. The short-end injection mode applied enabled siRNA detection in less than 5 min. Moreover, the CE technique offers many advantages compared with the other classical methods. It is automated, does not require sample preparation and expensive reagents. Moreover, no mutagenic risk is associated with the CE approach since no carcinogenic product is used. Finally, this methodology can also be extended for the characterization of other types of nanoparticles encapsulating siRNA, such as cationic polymeric nanoparticles.

Study of intact virus-like particles of human papillomavirus by capillary electrophoresis.

Virus-like particles of human papillomavirus (HPV-VLP), resulting from the self-assembly of the capsid proteins (L1 or L1 and L2), have been widely used to study HPV as they are similar to the native virion. Moreover, two prophylactic vaccines, Gardasil(®) and Cervarix(®), are based on HPV-VLP L1. Analytical techniques currently used to characterize HPV-VLP, such as SDS-PAGE, Western blot, ELISA, are time-consuming and semiquantitative. In this study, CE was evaluated for the analysis of intact HPV16-VLP. The usefulness of capillary inner wall coating as well as various BGEs, pH, and detergent additives were investigated. Reproducible HPV-VLP analysis in CE was achieved using poly(ethylene oxide)-coated capillary and a BGE containing high salt concentration and low SDS concentration. The developed method enables HPV-VLP detection in less than 10 min (migration times RSD: 1.6%). The identity of HPV-VLP peak was confirmed by comparison with a sample obtained from a wild-type baculovirus and with VLP-based vaccine, Gardasil(®) , after adjuvant dissolution. Finally, we applied the developed methodology to VLP-based vaccines, demonstrating that CE could be successfully used for vaccine quality control.

Bone Marrow-Derived Mesenchymal Stromal Cell Therapy in Severe COVID-19: Preliminary Results of a Phase I/II Clinical Trial.

Background: Treatment of acute respiratory distress syndrome (ARDS) associated with COronaVIrus Disease-2019 (COVID-19) currently relies on dexamethasone and supportive mechanical ventilation, and remains associated with high mortality. Given their ability to limit inflammation, induce immune cells into a regulatory phenotype and stimulate tissue repair, mesenchymal stromal cells (MSCs) represent a promising therapy for severe and critical COVID-19 disease, which is associated with an uncontrolled immune-mediated inflammatory response. Methods: In this phase I-II trial, we aimed to evaluate the safety and efficacy of 3 intravenous infusions of bone marrow (BM)-derived MSCs at 3-day intervals in patients with severe COVID-19. All patients also received dexamethasone and standard supportive therapy. Between June 2020 and September 2021, 8 intensive care unit patients requiring supplemental oxygen (high-flow nasal oxygen in 7 patients, invasive mechanical ventilation in 1 patient) were treated with BM-MSCs. We retrospectively compared the outcomes of these MSC-treated patients with those of 24 matched control patients. Groups were compared by paired statistical tests. Results: MSC infusions were well tolerated, and no adverse effect related to MSC infusions were reported (one patient had an ischemic stroke related to aortic endocarditis). Overall, 3 patients required invasive mechanical ventilation, including one who required extracorporeal membrane oxygenation, but all patients ultimately had a favorable outcome. Survival was significantly higher in the MSC group, both at 28 and 60 days (100% vs 79.2%, p = 0.025 and 100% vs 70.8%, p = 0.0082, respectively), while no significant difference was observed in the need for mechanical ventilation nor in the number of invasive ventilation-free days, high flow nasal oxygenation-free days, oxygen support-free days and ICU-free days. MSC-treated patients also had a significantly lower day-7 D-dimer value compared to control patients (median 821.0 µg/L [IQR 362.0-1305.0] vs 3553 µg/L [IQR 1155.0-6433.5], p = 0.0085). Conclusions: BM-MSC therapy is safe and shows very promising efficacy in severe COVID-19, with a higher survival in our MSC cohort compared to matched control patients. These observations need to be confirmed in a randomized controlled trial designed to demonstrate the efficacy of BM-MSCs in COVID-19 ARDS. Clinical Trial Registration: (www.ClinicalTrials.gov), identifier NCT04445454.

MSC Manufacturing for Academic Clinical Trials: From a Clinical-Grade to a Full GMP-Compliant Process.

Following European regulation 1394/2007, mesenchymal stromal cell (MSCs) have become an advanced therapy medicinal product (ATMP) that must be produced following the good manufacturing practice (GMP) standards. We describe the upgrade of our existing clinical-grade MSC manufacturing process to obtain GMP certification. Staff organization, premises/equipment qualification and monitoring, raw materials management, starting materials, technical manufacturing processes, quality controls, and the release, thawing and infusion were substantially reorganized. Numerous studies have been carried out to validate cultures and demonstrate the short-term stability of fresh or thawed products, as well their stability during long-term storage. Detailed results of media simulation tests, validation runs and early MSC batches are presented. We also report the validation of a new variant of the process aiming to prepare fresh MSCs for the treatment of specific lesions of Crohn's disease by local injection. In conclusion, we have successfully ensured the adaptation of our clinical-grade MSC production process to the GMP requirements. The GMP manufacturing of MSC products is feasible in the academic setting for a limited number of batches with a significant cost increase, but moving to large-scale production necessary for phase III trials would require the involvement of industrial partners.

Quantitation and biospecific identification of virus-like particles of human papillomavirus by capillary electrophoresis.

Capillary electrophoresis (CE) for HPV-VLP quantitation is a very interesting alternative technique compared to those currently used in viral analysis, such as SDS-PAGE, Western blot or protein assay that are destructive and semi-quantitative or non specific. In this study, the quantitative performance of the CE method was evaluated. A main issue in virus quantitation is the absence of reference material. Therefore, the concentration of a HPV16-VLP sample produced in the laboratory was determined using ELISA with Gardasil®, after adjuvant dissolution, as reference material and conformational H16.V5 antibody. HPV16-VLP concentration was found to influence particles electrophoretic mobility until a plateau was reached for concentrations ≤ 50µgml-1. As zeta potential is directly proportional to the electrophoretic mobility, it was measured at different HPV-VLP concentrations and the results were in complete accordance with the measured electrophoretic mobilities. The concentration dependence of the electrophoretic mobility could be explained by an overlap of the electrical double layers of adjacent particles. The HPV16-VLP peak identity was demonstrated unequivocally by the study of HPV16-VLP/H16.V5 antibody complex formation using affinity CE. Finally, the CE method was successfully validated following the ICH Q2R1 guidelines. To overcome the sample heterogeneity issue, a well-designed sample preparation was used. Considering sample complexity, validation results were satisfactory with maximum repeatability and intermediate precision RSD of 12.2% and a maximum relative bias of 1.4%.

Determination of inhibitory potency of argatroban toward thrombin by electrophoretically mediated microanalysis.

Developing an EMMA method for enzymatic assay remains a challenge, particularly using UV detection. Indeed, it is necessary to optimize the separation conditions while allowing the enzymatic reaction to occur within the capillary respecting kinetic constraints and achieving enough sensitivity. In this work, such EMMA methodology was set up to evaluate the inhibitory potency of drugs toward thrombin, a serine protease implicated in the coagulation cascade. To achieve our goal, the separation buffer, the injection sequence, the internal standard and the chromogenic substrate were investigated. The newly developed system was then assessed determining the kinetic Km constant for the selected substrate and compared with the results obtained with a continuous spectrophotometer cell assay. Secondly, the Ki inhibitory constant of the thrombin inhibitor argatroban was determined and found in agreement with the published value.