Bacterial translocation and microgap formation at a novel conical indexed implant abutment system for single crowns.

OBJECTIVES: A conometric concept was recently introduced in which conical implant abutments hold the matching crown copings by friction alone, eliminating the need for cement or screws. The aim of this in vitro study was to assess the presence of microgap formation and bacterial leakage at the Acuris conometric restorative interface of three different implant abutment systems. MATERIAL AND METHODS: A total of 75 Acuris samples of three implant-abutment systems (Ankylos, Astra Tech EV, Xive) were subjected to microbiological (n = 60) and scanning electron microscopic (SEM) investigation (n = 15). Bacterial migration into and out of the conical coupling system were analyzed in an anaerobic workstation for 48, 96, 144, and 192 h. Bacterial DNA quantification using qrt-PCR was performed at each time point. The precision of the conometric coupling and internal fit of cemented CAD/CAM crowns on corresponding Acuris TiN copings were determined by means of SEM. RESULTS: qrt-PCR results failed to demonstrate microbial leakage from or into the Acuris system. SEM analysis revealed minute punctate microgaps at the apical aspect of the conometric junction (2.04 to 2.64 µm), while mean cement gaps of 12 to 145 µm were observed at the crown-coping interface. CONCLUSIONS: The prosthetic morse taper connection of all systems examined does not allow bacterial passage. Marginal integrity and internal luting gap between the ceramic crown and the coping remained within the clinically acceptable limits. CLINICAL RELEVANCE: Conometrically seated single crowns provide sufficient sealing efficiency, relocating potential misfits from the crown-abutment interface to the crown-coping interface.

Effects of a Novel Cold Atmospheric Plasma Treatment of Titanium on the Proliferation and Adhesion Behavior of Fibroblasts.

Cold plasma treatment increases the hydrophilicity of the surfaces of implants and may enhance their integration with the surrounding tissues. The implaPrep prototype device from Relyon Plasma generates cold atmospheric plasma via dielectric barrier discharge (DBD). In this study, titanium surfaces were treated with the implaPrep device for 20 s and assessed as a cell culture surface for fibroblasts. One day after seeding, significantly more cells were counted on the surfaces treated with cold plasma than on the untreated control titanium surface. Additionally, the viability assay revealed significantly higher viability on the treated surfaces. Morphological observation of the cells showed certain differences between the treated and untreated titanium surfaces. While conventional plasma devices require compressed gas, such as oxygen or argon, the implaPrep device uses atmospheric air as the gas source. It is, therefore, compact in size and simple to handle, and may provide a safe and convenient tool for treating the surfaces of dental implants, which may further improve the implantation outcome.

Influence of the Casting Concentration on the Mechanical and Optical Properties of FA/CaCl2-Derived Silk Fibroin Membranes.

In this study, we describe the manufacturing and characterization of silk fibroin membranes derived from the silkworm Bombyx mori. To date, the dissolution process used in this study has only been researched to a limited extent, although it entails various potential advantages, such as reduced expenses and the absence of toxic chemicals in comparison to other conventional techniques. Therefore, the aim of this study was to determine the influence of different fibroin concentrations on the process output and resulting membrane properties. Casted membranes were thus characterized with regard to their mechanical, structural and optical assets via tensile testing, SEM, light microscopy and spectrophotometry. Cytotoxicity was evaluated using BrdU, XTT, and LDH assays, followed by live-dead staining. The formic acid (FA) dissolution method was proven to be suitable for the manufacturing of transparent and mechanically stable membranes. The fibroin concentration affects both thickness and transparency of the membranes. The membranes did not exhibit any signs of cytotoxicity. When compared to other current scientific and technical benchmarks, the manufactured membranes displayed promising potential for various biomedical applications. Further research is nevertheless necessary to improve reproducible manufacturing, including a more uniform thickness, less impurity and physiological pH within the membranes.

Pharmacokinetics of tranexamic acid in neonates and infants undergoing cardiac surgery.

AIM: Tranexamic acid (TXA) continues to be one of the antifibrinolytics of choice during paediatric cardiac surgery. However, in infants less than 1 year of age, the optimal dosing based on pharmacokinetic (PK) considerations is still under discussion. METHODS: Forty-three children less than 1 year of age were enrolled, of whom 37 required the use of cardiopulmonary bypass (CPB) and six were operated on without CPB. Administration of 50 mg kg-1 TXA intravenously at the induction of anaesthesia was followed by 50 mg kg-1 into the CPB prime in the CPB group. Plasma concentrations of TXA were analysed by gas chromatography-mass spectrometry. PK data were investigated using nonlinear mixed-effect models. RESULTS: A two-compartment model was fitted, with the main covariates being allometrically scaled bodyweight, CPB, postmenstrual age (PMA). Intercompartmental clearance (Q), peripheral volume (V2), systemic clearance, (CL) and the central volume (V1) were calculated. Typical values of the PK parameter estimates were as follows: CL = 3.78 [95 % confidence interval (CI) 2.52, 5.05] l h-1 ; central volume of distribution = 13.6 (CI 11.7, 15.5) l; Q = 16.3 (CI 13.5, 19.2) l h-1 ; V2 = 18.0 (CI 16.1, 19.9) l. Independently of age, 10 mg kg-1 TXA as a bolus, a subsequent infusion of 10 mg kg-1 h-1 , then a 4 mg kg-1 bolus into the prime and a reduced infusion of 4 mg kg-1 h-1 after the start of CPB are required to maintain TXA concentrations continuously above 20 µg ml-1 , the threshold value for an effective inhibition of fibrinolysis and far lower than the usual peak concentrations (the '10-10-4-4 rule'). CONCLUSIONS: The introduction of a modified dosing regimen using a starting bolus followed by an infusion and a CPB prime bolus would prohibit the potential risk of seizures caused by high peak concentrations and also maintain therapeutic plasma concentration above 20 µg ml-1 .

Outcomes and influencing factors of dental implants in fibula, iliac crest, and scapula free flaps: a retrospective case-control study.

PURPOSE: Reconstruction with vascularized bone grafts after ablative surgery and subsequent dental rehabilitation with implants is often challenging; however, it helps improve the patient's quality of life. This retrospective case-control study aimed to determine the implant survival/success rates in different vascularized bone grafts and potential risk factors. METHODS: Only patients who received implants in free vascularized bone grafts between 2012 and 2020 were included. The free flap donor sites were the fibula, iliac crest, and scapula. The prosthetic restoration had to be completed, and the observation period had to be over one year after implantation. Implant success was defined according to the Health Scale for Dental Implants criteria. RESULTS: Sixty-two patients with 227 implants were included. The implant survival rate was 86.3% after an average of 48.7 months. The causes of implant loss were peri-implantitis (n = 24), insufficient osseointegration (n = 1), removal due to tumor recurrence (n = 1), and osteoradionecrosis (n = 5). Of all implants, 52.4% were classified as successful, 19.8% as compromised, and 27.8% as failed. Removal of osteosynthesis material prior to or concurrent with implant placement resulted in significantly better implant success than material not removed (p = 0.035). Localization of the graft in the mandibular region was associated with a significantly better implant survival (p = 0.034) and success (p = 0.002), also a higher Karnofsky Performance Status Scale score with better implant survival (p = 0.014). CONCLUSION: Implants placed in vascularized grafts showed acceptable survival rates despite the potential risk factors often present in these patient groups. However, peri-implantitis remains a challenge.

The role of herpes simplex virus infection in the etiology of head and neck cancer-a Mendelian randomization study.

Introduction: Head and neck cancer (HNC) is a complex disease, and multiple risk factors can lead to its progression. Observational studies indicated that herpes simplex virus (HSV) may be correlated with the risk of HNC. However, the causal effects and direction between them were still unclear. Methods: This study utilized a Mendelian randomization (MR) approach for causality assessment between HSV infection and Head and neck cancer based on the latest public health data and Genome-Wide Association Study (GWAS) data. The causal effects were estimated using IVW, weighted median, and MR-Egger. A reverse MR analysis was subsequently performed. Cochrans Q test, MR-Egger intercept test, leave one out analysis, and the funnel plot were all used in sensitivity analyses. Results: Genetically predicted higher level of HSV-1 IgG was causally related to HNC (OR=1.0019, 95%CI=1.0003-1.0036, p=0.0186, IVW) and oral and oropharyngeal cancer (OR=1.0018, 95%CI=1.0004-1.0033, p=0.0105, IVW). The reverse MR analysis did not demonstrate a reverse causal relationship between HSV and HNC. However, HSV-2 infection was not causally related to HNC data and oropharyngeal cancer data. Sensitivity analysis was performed and revealed no heterogeneity and horizontal pleiotropy. Conclusion: Collectively, a significant association was noted between HSV infection and increased risk of HNC, providing valuable insights into the etiology of this malignancy. Further in-depth study is needed to validate these findings and elucidate the underpinning mechanisms.

PIK3CA Hotspot Mutations in Saliva as a Diagnostic Marker in Oral Squamous Cell Carcinoma Patients.

BACKGROUND/AIM: This study aimed at the analogous detection of PIK3CA mutations, common in oral squamous cell carcinoma (OSCC), in matched tumor and saliva samples. PATIENTS AND METHODS: Tissue and saliva samples were obtained from 29 patients diagnosed with primary OSCC. Saliva samples were obtained preoperatively; tissue specimens were acquired during tumor resection. Tumor DNA was extracted from both tissue and saliva samples. All samples were controlled for DNA quantity and quality and genetic matching of sample pairs was confirmed using the iPlex Pro Exome QC Panel. Variant detection was performed using the MassARRAY® System, a mass-spectrometry based detection system. Mutational analysis in tissue tumor DNA was made using the multiplexed ClearSEEK™ PIK3CA v1.0 Panel covering 20 hotspot mutations in PIK3CA. In saliva samples, variants were analyzed using both the ClearSEEK™ and the UltraSEEK® Lung v1.1 Panel, with a higher limit of detection but covering less PIK3CA variants. RESULTS: Overall, a PIK3CA variant was found in seven of the 29 tumor tissue samples (24%) by ClearSEEK™; UltraSEEK® additionally confirmed the variant in four of these seven positive samples. Of the three variants not detected by UltraSEEK®, two were not included in the panel and one was included but not detected. Of the seven variants found in tissue, five could also be detected in the matching saliva samples (71%), either by utilizing ClearSEEK™ or UltraSEEK® Conclusion: The detection of PIK3CA hotspot mutations in OSCC and their simultaneous occurrence in saliva underline the potential benefit of liquid biopsies for non-invasive cancer detection and follow-up care of OSCC patients.

Case Report: Early detection of lung carcinoid in an asymptomatic individual by blood-test initiated PET-CT imaging.

We present the case of a 53-year-old woman who was diagnosed with early-stage lung cancer by targeted cancer screening consisting of an immunological biopsy-based blood test followed by radiological imaging. The PanTum Detect blood test detects the biomarkers Apo10/DNaseX and Transketolase-like 1 (TKTL1) in circulating macrophage-like cells from peripheral blood samples to identify asymptomatic individuals with a high risk for malignancy. The elevated blood test values initiated an 18F-FDG PET/CT visualization for further clarification. In this case, imaging indicated a lung carcinoma in the right upper lobe. A biopsy confirmed the presence of a lung carcinoma, which was removed surgically. Histologic examination revealed a typical I A2 carcinoid, which was completely removed, making further therapy obsolete.

Evaluation of the sense of taste and smell in patients with Neurofibromatosis Type 1.

OBJECTIVE: The objective of this study was to determine if patients with Neurofibromatosis Type 1 (NF1) have an impaired sense of smell or taste. Neurofibromin, the NF1gene protein product is ubiquitous in the body and is especially associated with the development of neurogenetic structures. Lately enlarged olfactory bulbs have been described in patients with NF1. Until now, there is no study to evaluate the sense of smell and taste in patients with NF1. METHOD: This study has been approved by the Hamburg Ethics committee. An evaluation of the sense of smell and taste was undertaken in 26 patients with NF1 using the Burghart Sniffin' Sticks. Three patients were excluded due to a prior infection with the Corona virus. As a control group the same examination was performed in healthy individuals (same sex/ same age as the NF1 patients) by the same examiner. RESULTS: The results show a normal sense of smell in patients with NF1. The morphologic finding of enlarged olfactory bulbs seem to have no functional equivalent. However, 8 out of 23 patients with NF1 had difficulties identifying at least one taste flavor. In total 9.8% of possible taste qualities were misidentified. In the healthy control group, all taste qualities were identified correctly. Considering each taste quality as separate case, a significant difference in the taste function was identified based on Fisher's exact test (p=0.003). CONCLUSION: The current study does not show a correlation between NF1 and an impaired sense of smell. Yet significant reduction in the sense of taste was found in the patients with NF1. Further research will have to be conducted to find the underlying causal pathways. CLINICAL RELEVANCE: NF1 is recently being acknowledged not only for its' macroscopic aesthetic and functional impairments, but also as a neurodevelopmental disorder. Evaluating the neural structures in regard to their function is a first step in understanding more about the disease.

Does placement of one-piece zirconia implants influence crestal bone loss? Retrospective evaluation 1 year after prosthetic loading.

PURPOSE: To evaluate the impact of immediate and delayed zirconia implant placement on crestal bone loss and the clinical outcomes achieved with this approach 1 year after prosthetic loading. Further objectives were to evaluate the influence of age, sex, smoking, implant dimensions, platelet-rich fibrin application and location of the implants in the jawbone on the crestal bone level. MATERIALS AND METHODS: Clinical and radiographic analysis were performed to evaluate the success rates for both groups. The data were analysed statistically through a linear regression analysis. RESULTS: No significant difference was found between immediate and delayed implant placement concerning the amount of crestal bone loss. Sex, age, bone augmentation, diabetes and prosthetic complications did not have a statistically significant influence; only smoking had a negative and statistically significant influence on crestal bone loss (P < 0.05). CONCLUSIONS: Immediate or delayed placement of one-piece zirconia implants may be a good alternative to the use of titanium implants concerning success and survival.

The causal association between COVID-19 and herpes simplex virus: a Mendelian randomization study.

Introduction: The coronavirus disease 2019 (COVID-19) has emerged as a main global public health challenge. Additionally, herpes simplex virus type-1 (HSV-1) and type 2 (HSV-2) are widespread viruses that can cause orolabial herpes and genital herpes. Several clinical case reports have declared a possible association between the two, however, the causal relationship between them has not been clarified. Methods: This study utilized a Mendelian randomization (MR) approach for causality assessment between COVID-19 infection and HSV infection based on the latest public health data and Genome-Wide Association Study (GWAS) data. Multiple causal estimation methods, such as IVW, weighted median, simple mode, and weighted mode, were employed to validate the causal relation between COVID-19 infection and HSV infection, with COVID-19 infection, COVID-19 hospitalization, and severe COVID-19 as exposures, and HSV1/2 infection as the outcome. A reverse MR analysis was subsequently performed. Results: MR analysis exhibited that COVID-19 infection was relevant to a reduced risk of HSV1 infection (p=7.603239e-152, OR=0.5690, 95%CI=0.5455-0.5935, IVW). Regarding the effect of COVID-19 infection on HSV2, MR analysis suggested that COVID-19 infection was correlated with an augmented risk of HSV2 infection (p=6.46735e-11, OR=1.1137, 95%CI=1.0782-1.1502, IVW). The reverse MR analysis did not demonstrate a reverse causal relationship between HSV and COVID-19. Discussion: Altogether, COVID-19 infection might cause a decreased risk of HSV1 infection and an elevated risk of HSV2 infection.

Correlations between gut microbiota and lichen planus: a two-sample Mendelian randomization study.

Purpose: Several existing studies have revealed that the occurrence of lichen planus (LP) is relevant to the gut microbiota, and the causal relationship between gut microbiota and LP was analyzed using the Mendelian randomization (MR) method. Methods: Through the two-sample MR method, single nucleotide polymorphisms (SNPs) relevant to gut microbiota were selected as instrument variables (IVs) to evaluate the causal association between gut microbiota and the risk of LP. Results: According to the selection criteria of inverse-variance weighted (IVW), six bacterial genera were found to be significantly linked to the initiation of LP; The IVW results suggested that Oxalobacteraceae, Victivallaceae, and Actinobacteria could restrain the initiation of LP, showing protective effects against LP. Desulfovibrio, Veillonella, and Ruminococcus gauvreauii groups were demonstrated to have casual correlations with the onset of LP. Conclusion: The relationship between gut microbiota and LP was not a single positive or inverse relationship. Investigation of the causal relationship of these gut microbiota with LP could further provide evidence for the intestine-skin axis theory. However, the specific mechanism of microorganisms affecting the skin remains to be clarified. In this paper, the protective effects and mechanisms of Oxalobacteraceae, Victivallaceae, and Actinobacteria on LP require further exploration.

A new surgical approach to treatment of bilateral syngnathia in a patient with popliteal pterygium-syndrome.

This case describes the treatment of syngnathia with a popliteal-pterygium syndrome. Although short-term successful surgical treatment has been described in literature, long-term follow up is essential, as the mouth opening limitations can be repetitively reoccurring. This requires new, individual treatment strategies as demonstrated in this case. A young patient is shown, who is successfully undergoing an alloplastic temporomandibular joint replacement to improve mouth opening, increasing the posterior airway space and facilitating the food intake.

Tolerance of Human Fibroblasts to Benfo-Oxythiamine In Vitro.

OBJECTIVES: To explore the potential application of B-OT in the aspiration tract. MATERIALS AND METHODS: We conceived and optimized an in vitro model simulating the mouth-washing process to assess tolerance to B-OT on primary human gingival fibroblasts. Cells derived from 4 unrelated donors were flushed with medium containing drugs of various concentration for one minute twice daily for 3 days. RESULTS: No effect was seen on the cells up to 1000 µM B-OT. In addition, we treated the cells with B-OT permanently in medium, corresponding to a systemic treatment. No effect was seen by 10 µM B-OT and only a slight reduction (approximately 10%) was seen by 100 µM B-OT. CONCLUSIONS: Our results suggest good tolerance of oral cells for B-OT, favoring the further development of this antiviral reagent as a mouth-washing solution and nasal spray.

Functional and structural aspects in periodontal furcation treatment: a novel approach.

The outcome in the treatment of furcation defects is often unsatisfactory. The reasons are morphologic and pathologic peculiarities as well as extensive changes in shape caused by resective treatment of periodontal lesions in multi-rooted teeth. Therefore, augmentative strategies are suggested to improve the prognosis. However, the success rate decreases with increasing severity of the disease. In contrast, if the affected roots are not extracted but are extruded after hemi- or trisection, this leads to a coronal displacement of the disease process and a significantly improved situation for hygiene. At the same time, the resection of inflammatory tissue of the periodontal pockets is accompanied by vertical and horizontal bone apposition. The results are predictable and stable in the long term. The burden for the patient is low. ((Quintessence Int 2022;53: 884-891; Originally published (in German) in Quintessenz Zahnmedizin 2020; 71(9): 1024-1032; doi: 10.3290/j.qi.b3418205).

Effect of process parameters on additive-free electrospinning of regenerated silk fibroin nonwovens.

Silk fibroin is a biomaterial with multiple beneficial properties for use in regenerative medicine and tissue engineering. When dissolving and processing the reconstituted silk fibroin solution by electrospinning, the arrangement and size of fibers can be manifold varied and according fiber diameters reduced to the nanometer range. Such nonwovens show high porosity as well as potential biocompatibility. Usually, electrospinning of most biomaterials demands for the application of additives, which enable stable electrospinning by adjusting viscosity, and are intended to evaporate during processing or to be washed out afterwards. However, the use of such additives increases costs and has to be taken into account in terms of biological risks when used for biomedical applications. In this study, we explored the possibilities of additive-free electrospinning of pure fibroin nonwovens and tried to optimize process parameters to enable stable processing. We used natural silk derived from the mulberry silkworm Bombyx mori. After degumming, the silk fibroin was dissolved and the viscosity of the spinning solution was controlled by partial evaporation of the initial solving agent. This way, we were able to completely avoid the use of additives and manufacture nonwovens, which potentially offer higher biocompatibility and reduced immunogenicity. Temperature and relative humidity during electrospinning were systematically varied (25-35 °C, 25-30% RH). In a second step, the nonwovens optionally underwent methanol treatment to initiate beta-sheet formation in order to increase structural integrity and strength. Comprehensive surface analysis on the different nonwovens was performed using scanning electron microscopy and supplemented by additional mechanical testing. Cytotoxicity was evaluated using BrdU-assay, XTT-assay, LDH-assay and live-dead staining. Our findings were, that an increase of temperature and relative humidity led to unequal fiber diameters and defective nonwovens. Resistance to penetration decreased accordingly. The most uniform fiber diameters of 998 ± 63 nm were obtained at 30 °C and 25% relative humidity, also showing the highest value for resistance to penetration (0.20 N). The according pure fibroin nonwoven also showed no signs of cytotoxicity. However, while the biological response showed statistical evidence, the material characteristics showed no statistically significant correlation to changes of the ambient conditions within the investigated ranges. We suggest that further experiments should explore additional ranges for temperature and humidity and further focus on the repeatability of material properties in dependency of suitable process windows.

Production and Characterization of Porous Fibroin Scaffolds for Regenerative Medical Application.

BACKGROUND/AIM: Silk is a natural biomaterial with several superior features for applications in regenerative medicine. In the present study an optimized process for manufacturing porous scaffolds out of the silk protein fibroin was developed. MATERIALS AND METHODS: The silk protein fibroin was dissolved in Ajisawa's reagent and the resulting fibroin solution was used to produce scaffolds by means of freeze-thawing cycling. Porosity, pressure and stab resistance as well as degradation behavior were assessed in order to characterize the physical properties of the resulting scaffolds. RESULTS: The resulting sponge-like fibroin scaffolds were highly porous while the porosity correlated inversely with the concentration of the starting fibroin solution. Increased initial fibroin concentrations of the scaffolds resulted in increased compressive and cannulation resistance. The majority of the fibroin scaffolds were digested by 1 mg/ml protease XIV in 3 weeks, indicating their biodegradability. CONCLUSION: The production of scaffolds made of varying fibroin concentrations by means of freeze-thawing, following dissolution using Ajisawa's reagent, provides a simple and straightforward strategy for adjusting the physical and chemical properties of fibroin scaffolds for various medical applications.