Hunting for valuables from landfills and assessing their market opportunities A case study with Kudjape landfill in Estonia.

Landfill mining is an alternative technology that merges the ideas of material recycling and sustainable waste management. This paper reports a case study to estimate the value of landfilled materials and their respective market opportunities, based on a full-scale landfill mining project in Estonia. During the project, a dump site (Kudjape, Estonia) was excavated with the main objectives of extracting soil-like final cover material with the function of methane degradation. In total, about 57,777 m3 of waste was processed, particularly the uppermost 10-year layer of waste. Manual sorting was performed in four test pits to determine the detailed composition of wastes. 11,610 kg of waste was screened on site, resulting in fine (<40 mm) and coarse (>40 mm) fractions with the share of 54% and 46%, respectively. Some portion of the fine fraction was sieved further to obtain a very fine grained fraction of <10 mm and analyzed for its potential for metals recovery. The average chemical composition of the <10 mm soil-like fraction suggests that it offers opportunities for metal (Cr, Cu, Ni, Pb, and Zn) extraction and recovery. The findings from this study highlight the importance of implementing best available site-specific technologies for on-site separation up to 10 mm grain size, and the importance of developing and implementing innovative extraction methods for materials recovery from soil-like fractions.

Fractionation of Pb and Cu in the fine fraction (<10 mm) of waste excavated from a municipal landfill.

The fractionation of metals in the fine fraction (<10 mm) of excavated waste from an Estonian landfill was carried out to evaluate the metal (Pb and Cu) contents and their potential towards not only mobility but also possibilities of recovery/extraction. The fractionation followed the BCR (Community Bureau of Reference) sequential extraction, and the exchangeable (F1), reducible (F2), oxidizable (F3) and residual fractions were determined. The results showed that Pb was highly associated with the reducible (F2) and oxidizable (F3) fractions, suggesting the potential mobility of this metal mainly when in contact with oxygen, despite the low association with the exchangeable fraction (F1). Cu has also shown the potential for mobility when in contact with oxygen, since high associations with the oxidizable fraction (F3) were observed. On the other hand, the mobility of metals in excavated waste can be seen as beneficial considering the circular economy and recovery of such valuables back into the economy. To conclude, not only the total concentration of metals but also a better understanding of fractionation and in which form metals are bound is very important to bring information on how to manage the fine fraction from excavated waste both in terms of environmental impacts and also recovery of such valuables in the economy.

Knowledge mapping analysis of the global seaweed research using CiteSpace.

Seaweed research has gained substantial momentum in recent years, attracting the attention of researchers, academic institutions, industries, policymakers, and philanthropists to explore its potential applications and benefits. Despite the growing body of literature, there is a paucity of comprehensive scientometric analyses, highlighting the need for an in-depth investigation. In this study, we utilized CiteSpace to examine the global seaweed research landscape through the Web of Science Core Collection database, assessing publication trends, collaboration patterns, network structures, and co-citation analyses across 48,278 original works published since 1975. Our results demonstrate a diverse and active research community, with a multitude of authors and journals contributing to the advancement of seaweed science. Thematic co-citation cluster analysis identified three primary research areas: "Coral reef," "Solar radiation," and "Mycosporine-like amino acid," emphasizing the multidisciplinary nature of seaweed research. The increasing prominence of "Chemical composition" and "Antioxidant" keywords indicates a burgeoning interest in characterizing the nutritional value and health-promoting properties of seaweed. Timeline co-citation analysis unveils that recent research priorities have emerged around the themes of coral reefs, ocean acidification, and antioxidants, underlining the evolving focus and interdisciplinary approach of the field. Moreover, our analysis highlights the potential of seaweed as a functional food product, poised to contribute significantly to addressing global food security and sustainability challenges. This study underscores the importance of bibliometric analysis in elucidating the global seaweed research landscape and emphasizes the need for sustained knowledge exchange and collaboration to drive the field forward. By revealing key findings and emerging trends, our research offers valuable insights for academics and stakeholders, fostering a more profound understanding of seaweed's potential and informing future research endeavors in this promising domain.

Impact of per- and polyfluorinated alkyl substances (PFAS) on the marine environment: Raising awareness, challenges, legislation, and mitigation approaches under the One Health concept.

Per- and polyfluorinated alkyl substances (PFAS) have long been known for their detrimental effects on the ecosystems and living organisms; however the long-term impact on the marine environment is still insufficiently recognized. Based on PFAS persistence and bioaccumulation in the complex marine food network, adverse effects will be exacerbated by global processes such as climate change and synergies with other pollutants, like microplastics. The range of fluorochemicals currently included in the PFAS umbrella has significantly expanded due to the updated OECD definition, raising new concerns about their poorly understood dynamics and negative effects on the ocean wildlife and human health. Mitigation challenges and approaches, including biodegradation and currently studied materials for PFAS environmental removal are proposed here, highlighting the importance of ongoing monitoring and bridging research gaps. The PFAS EU regulations, good practices and legal frameworks are discussed, with emphasis on recommendations for improving marine ecosystem management.

The Evolution of Coral Reef under Changing Climate: A Scientometric Review.

In this scientometric review, we employ the Web of Science Core Collection to assess current publications and research trends regarding coral reefs in relation to climate change. Thirty-seven keywords for climate change and seven keywords for coral reefs were used in the analysis of 7743 articles on coral reefs and climate change. The field entered an accelerated uptrend phase in 2016, and it is anticipated that this phase will last for the next 5 to 10 years of research publication and citation. The United States and Australia have produced the greatest number of publications in this field. A cluster (i.e., focused issue) analysis showed that coral bleaching dominated the literature from 2000 to 2010, ocean acidification from 2010 to 2020, and sea-level rise, as well as the central Red Sea (Africa/Asia), in 2021. Three different types of keywords appear in the analysis based on which are the (i) most recent (2021), (ii) most influential (highly cited), and (iii) mostly used (frequently used keywords in the article) in the field. The Great Barrier Reef, which is found in the waters of Australia, is thought to be the subject of current coral reef and climate change research. Interestingly, climate-induced temperature changes in "ocean warming" and "sea surface temperature" are the most recent significant and dominant keywords in the coral reef and climate change area.

Modelling of Environmental Ageing of Polymers and Polymer Composites-Durability Prediction Methods.

Polymers and polymer composites are negatively impacted by environmental ageing, reducing their service lifetimes. The uncertainty of the material interaction with the environment compromises their superior strength and stiffness. Validation of new composite materials and structures often involves lengthy and expensive testing programs. Therefore, modelling is an affordable alternative that can partly replace extensive testing and thus reduce validation costs. Durability prediction models are often subject to conflicting requirements of versatility and minimum experimental efforts required for their validation. Based on physical observations of composite macroproperties, engineering and phenomenological models provide manageable representations of complex mechanistic models. This review offers a systematised overview of the state-of-the-art models and accelerated testing methodologies for predicting the long-term mechanical performance of polymers and polymer composites. Accelerated testing methods for predicting static, creep, and fatig ue lifetime of various polymers and polymer composites under environmental factors' single or coupled influence are overviewed. Service lifetimes are predicted by means of degradation rate models, superposition principles, and parametrisation techniques. This review is a continuation of the authors' work on modelling environmental ageing of polymer composites: the first part of the review covered multiscale and modular modelling methods of environmental degradation. The present work is focused on modelling engineering mechanical properties.

Trends and New Developments in Artemia Research.

An increasing number of scientists since 1970 has examined Artemia as an important species in aquaculture-related fields. However, a global scientometric review of Artemia literature is still lacking, which is the objective of this research. Using a CiteSpace analysis, the distribution of core authors and institutions, highly cited keywords and papers, author and journal contributions, and hot topics in the literature, as well as a co-citation analysis, particularly regarding authors, journals, documents, and clusters, were determined. Hence, 8741 relevant publications were generated from the Web of Science Core Collection database. The results revealed that the most significant contributions in Artemia research primarily originated from the USA, Brazil, Spain, India, China, and Belgium. Moreover, Artemia research focused mainly on top keywords such as brine shrimp and antimicrobial activity. Emerging trends related to Artemia research were Atlantic halibut, elongation factor, Artemia salina, lean protein, inert diet, alpha-crystallin protein, and Artemia embryo. At the same time, the study generated a vast total of 45 co-citation clusters. The present study provides the existing body of knowledge on Artemia research by sharing a visual knowledge map. This study offers a valuable perspective and profound understanding for researchers, farmers, and consortia interested in promoting Artemia as a sustainable live food in the global aquaculture industry.

Modelling of Environmental Ageing of Polymers and Polymer Composites-Modular and Multiscale Methods.

Service lifetimes of polymers and polymer composites are impacted by environmental ageing. The validation of new composites and their environmental durability involves costly testing programs, thus calling for more affordable and safe alternatives, and modelling is seen as such an alternative. The state-of-the-art models are systematized in this work. The review offers a comprehensive overview of the modular and multiscale modelling approaches. These approaches provide means to predict the environmental ageing and degradation of polymers and polymer composites. Furthermore, the systematization of methods and models presented herein leads to a deeper and reliable understanding of the physical and chemical principles of environmental ageing. As a result, it provides better confidence in the modelling methods for predicting the environmental durability of polymeric materials and fibre-reinforced composites.

Chemical speciation of metals from marine sediments: Assessment of potential pollution risk while dredging, a case study in southern Sweden.

Contamination associated with metals is a critical concern related to their toxicity, persistence, and bio-accumulation. Trace elements are partitioned into several chemical forms, which some are more labile during fluctuations in the environment. Studying the distribution of metals between the different chemical fractions contributes to assess their bioavailability and to identify their potential risk of contamination to surrounding environments. This study concerns the speciation of metals (Pb, Cr, Ni, Zn and Fe) from sediments coming out from Malmfjärden bay, Sweden. The aim was to assess the potential risk of metal pollution during present and future dredging as well as while using dredged sediments in beneficial uses. The Tessier speciation procedure was chosen, and the results showed that low concentrations of metals were associated with the exchangeable fraction. In contrast, the major concentrations were linked to the residual part. The risk indexes (contamination factor and risk assessment code) showed that, during dredging activities, there is a low concern of pollution for Cr, Ni and Fe and a medium risk for Pb and Zn. Additionally, in all elements, the sum of non-residual concentrations was below the Swedish limits for using dredged sediments in sensitive lands. The findings suggested that the investigated metals in Malmfjärden sediments are related to low risks of spreading during using in beneficial uses.

Dataset of trace elements concentrations in snow samples collected in Jelgava City (Latvia) in December 2020.

The data set provided in this article consist of two repeated data sets of chemical elements concentrations in snow samples. The snow samples were collected in Jelgava city at December 15th with 5 day exposition time. Snow samples were collected in 59 monitoring points in Jelgava city and in one sample in rural area monitoring point as control. The collected snow samples were melted, acidified with HNO3 and analysed with ICP-MS. The samples were analysed Aluminium (Al), Silicon (Si), Chrome (Cr), Manganese (Mn), Iron (Fe), Nickel (Ni), Copper (Cu), Zinc (Zn), Arsenic (As), Molybdenum (Mo), Cadmium (Cd), Barium (Ba), Tungsten (W), Lead (Pb). The collected data are with fundamental scientific value and can be applied only for local data analysis. Data set is useful for local city air quality research work and for evaluation not only local urban impact but in future evaluate city green infrastructure impact on air quality and evaluation of air pollution mitigation measures efficiency.

Physicochemical and toxicological characterization of hazardous wastes from an old glasswork dump at southeastern part of Sweden.

More than 34 old glasswork sites in the southeastern part of Sweden pose a permanent threat to human and environmental health due to the presence of toxic trace elements in open dumps with glass waste. The possibility of leaching of trace elements from different fractions of the disposed waste needed to be assessed. In the present investigation, leachate from a mixture of soil and waste glass of particle sizes of less than 2 mm (given the name fine fraction) was characterized by analyzing the pH (7.3), total organic content (TOC < 2%), organic matter content (4.4%), moisture content (9.7%), chemical oxygen demand (COD, 163 mg/kg) and trace elements content, being the values in accordance to the Swedish guidelines for landfilling of inert materials. However, very high trace elements content was found in the fine fraction as well as in all colors of waste glass, whose values were compatible to hazardous waste landfill class. Tests with Lepidium sativum growing in the fine fraction as substrate revealed chronic toxicity expressed as inhibition of root biomass growth in 11 out of 15 samples. Additionally, leachate from fine fractions posed acute toxicity to genetically modified E. coli (Toxi-Chromotest). This study highlights the importance of combining physicochemical characterization with toxicity tests for both solid waste and leachate obtained from different waste fractions for proper hazardousness assessment supporting decision making on remediation demands.