Hierarchical Self-Assembly of Curved Aromatics: From Donor-Acceptor Porphyrins to Triply Periodic Minimal Surfaces.

A saddle-shaped π-extended zinc porphyrin containing a peripheral pyridyl ligand undergoes quantitative self-assembly into a cyclic trimer. The trimer has a prismatic structure with negatively curved side walls, which promote the formation of supramolecular organic frameworks stabilized by dispersion interactions. The first framework type, UWr-1, has the npo topology, with a hexagonal structure analogous to the Schwartz H triply periodic minimal surface. Co-crystallization of the trimer with either C60 and C70 produces the isomorphous cubic UWr-2 and UWr-3 phases, characterized by the ctn network topology and a structural relationship to the Fischer-Koch minimal surface S. All three phases contain complex labyrinths of solvent-filled channels, corresponding to very large probe-accessible volumes (68 % to 76 %). The UWr-2 network could be partly desolvated while retaining its long range dimensional order, indicating remarkable strength of the dispersion interactions in the crystal. A theoretical analysis of noncovalent interactions shows the role of geometrical matching between the negatively curved porphyrin units and positively curved fullerenes.

Multi-Length Scale Structure of 2D/3D Dion-Jacobson Hybrid Perovskites Based on an Aromatic Diammonium Spacer.

Dion-Jacobson (DJ) iodoplumbates based on 1,4-phenylenedimethanammonium (PDMA) have recently emerged as promising light absorbers for perovskite solar cells. While PDMA is one of the simplest aromatic spacers potentially capable of forming a DJ structure based on (PDMA)An-1 Pbn I3n+1 composition, the crystallographic proof has not been reported so far. Single crystal structure of a DJ phase based on PDMA is presented and high-field solid-state NMR spectroscopy is used to characterize the structure of PDMA-based iodoplumbates prepared as thin films and bulk microcrystalline powders. It is shown that their atomic-level structure does not depend on the method of synthesis and that it is ordered and similar for all iodoplumbate homologues. Moreover, the presence of lower (n) homologues in thin films is identified through UV-Vis spectroscopy, photoluminescence spectroscopy, and X-ray diffraction measurements, complemented by cathodoluminescence mapping. A closer look using cathodoluminescence shows that the micron-scale microstructure corresponds to a mixture of different layered homologues that are well distributed throughout the film and the presence of layer edge states which dominate the emission. This work therefore determines the formation of DJ phases based on PDMA as the spacer cation and reveals their properties on a multi-length scale, which is relevant for their application in optoelectronics.

Feeding a Molecular Squid: A Pliable Nanocarbon Receptor for Electron-Poor Aromatics.

A hybrid nanocarbon receptor consisting of a calix[4]arene and a bent oligophenylene loop ("molecular squid"), was obtained in an efficient, scalable synthesis. The system contains an electron-rich cavity with an adaptable shape, which can serve as a host for electron deficient guests, such as diquat, 10-methylacridinium, and anthraquinone. The new receptor forms inclusion complexes in the solid state and in solution, showing a dependence of the observed binding strength on the shape of the guest species and its charge. The interaction with the methylacridinium cation in solution was interpreted in terms of a 2:1 binding model, with K11 = 5.92(7) × 103 M-1. The solid receptor is porous to gases and vapors, yielding an uptake of ca. 4 mmol/g for methanol at 293 K. In solution, the receptor shows cyan fluorescence (λmaxem = 485 nm, ΦF = 33%), which is partly quenched upon binding of guests. Methylacridinium and anthraquinone adducts show red-shifted emission in the solid state, attributable to the charge-transfer character of these inclusion complexes.

Rational Design of Noncovalent Diamondoid Microporous Materials for Low-Energy Separation of C6-Hydrocarbons.

Selective separation of gases/vapors with similar physicochemical properties involves energetically costly distillation processes. Alternative separation processes based on shape-selective molecular sieving, taking place on porous frameworks (or membranes), are less energy demanding but require an optimal balance between selectivity and diffusion kinetics (permeability). Herein, we report a rational strategy to select an optimal soft noncovalent microporous material (NPM) suitable for the low-energy separation of C6-hydrocarbons with kinetic diameters in the range of 4.3-6.3 Å. This strategy is based on a Cambridge Structural Database search of diamondoid NPMs with a low packing factor, leading to the selection of an oxidotetrazinc cluster based diamondoid NPM network named DiaMM-1 containing tetrahedral voids of 336 Å3 (tetrahedron insphere diameter of 5.8 Å accessible through 8.2 Å triangular windows) suitable for this separation. Based on this result the fluorinated analogue DiaMM-2 was designed and synthesized. DiaMM-1 and DiaMM-2 exhibit permanent porosity and high thermal stability. The optimal combination of molecular crystal softness, pore size, and decoration of pore surface of DiaMM-1,-2 leads to high adsorbate diffusivity and low adsorption energy, allowing fast separation of hexane isomers and benzene/cyclohexane mixtures at low temperature.

Destruction of chemical warfare agents using metal-organic frameworks.

Chemical warfare agents containing phosphonate ester bonds are among the most toxic chemicals known to mankind. Recent global military events, such as the conflict and disarmament in Syria, have brought into focus the need to find effective strategies for the rapid destruction of these banned chemicals. Solutions are needed for immediate personal protection (for example, the filtration and catalytic destruction of airborne versions of agents), bulk destruction of chemical weapon stockpiles, protection (via coating) of clothing, equipment and buildings, and containment of agent spills. Solid heterogeneous materials such as modified activated carbon or metal oxides exhibit many desirable characteristics for the destruction of chemical warfare agents. However, low sorptive capacities, low effective active site loadings, deactivation of the active site, slow degradation kinetics, and/or a lack of tailorability offer significant room for improvement in these materials. Here, we report a carefully chosen metal-organic framework (MOF) material featuring high porosity and exceptional chemical stability that is extraordinarily effective for the degradation of nerve agents and their simulants. Experimental and computational evidence points to Lewis-acidic Zr(IV) ions as the active sites and to their superb accessibility as a defining element of their efficacy.

Ultraporous, Water Stable, and Breathing Zirconium-Based Metal-Organic Frameworks with ftw Topology.

"Breathing" metal-organic frameworks (MOFs) are an emerging class of soft porous crystals (SPCs) with potential for high working capacity for gas storage applications. However, most breathing MOFs have low stability and/or low surface area. Here we report a water-stable, high surface area, breathing MOF of ftw topology, NU-1105. While Zr6-oxo clusters as nodes introduce water stability in NU-1105, its high surface area and breathing character stem from its pyrene-based tetracarboxylate (Py-FP) linkers, in which the fluorene units (F) in the FP "arms" play a key role in promoting breathing behavior. During gas sorption studies, the "closed pore" (cp) ↔ "open pore" (op) transition of NU-1105 occurs at a propane pressure of ∼3 bar. At 1 bar, NU-1105 is in its cp form and adsorbs less propane than it would in its op form, highlighting improved working capacity. In situ powder X-ray diffraction during propane sorption was used to track the cp ↔ op transition, and molecular modeling was used to elucidate the structure of the op and cp forms of NU-1105. According to TD-DFT calculations, the proposed conformations of the Py-FP linkers in the op and cp forms are consistent with the measured excitation and emission spectra of the op and cp forms of NU-1105. Similar structural transitions are also observed in the porphyrinic MOF NU-1104 depending on the identity of the porphyrin core; we observed breathing behavior if the constituent Por-PTP linker is nonmetalated.

Ultrahigh surface area zirconium MOFs and insights into the applicability of the BET theory.

An isoreticular series of metal-organic frameworks (MOFs) with the ftw topology based on zirconium oxoclusters and tetracarboxylate linkers with a planar core (NU-1101 through NU-1104) has been synthesized employing a linker expansion approach. In this series, NU-1103 has a pore volume of 2.91 cc g(-1) and a geometrically calculated surface area of 5646 m(2) g(-1), which is the highest value reported to date for a zirconium-based MOF and among the largest that have been reported for any porous material. Successful activation of the MOFs was proven based on the agreement of pore volumes and BET areas obtained from simulated and experimental isotherms. Critical for practical applications, NU-1103 combines for the first time ultrahigh surface area and water stability, where this material retained complete structural integrity after soaking in water. Pressure range selection for the BET calculations on these materials was guided by the four so-called "consistency criteria". The experimental BET area of NU-1103 was 6550 m(2) g(-1). Insights obtained from molecular simulation suggest that, as a consequence of pore-filling contamination, the BET method overestimates the monolayer loading of NU-1103 by ∼16%.

Experimental and computational insights into carbon dioxide fixation by RZnOH species.

Organozinc hydroxides, RZnOH, possessing the proton-reactive alkylzinc group and the CO2 -reactive Zn-OH group, represent an intriguing group of organometallic precursors for the synthesis of novel zinc carbonates. Comprehensive experimental and computational investigations on 1) solution and solid-state behavior of tBuZnOH (1) species in the presence of Lewis bases, namely, THF and 4-methylpyridine; 2) step-by-step sequence of the reaction between 1 and CO2; and 3) the effect of a donor ligand and/or an excess of tBu2Zn as an external proton acceptor on the reaction course are reported. DFT calculations for the insertion of carbon dioxide into the dinuclear alkylzinc hydroxide 12 are fully consistent with (1)H NMR spectroscopy studies and indicate that this process is a multistep reaction, in which the insertion of CO2 seems to be the rate-determining step. Moreover, DFT studies show that the mechanism of the rearrangement between key intermediates, that is, the primary alkylzinc bicarbonate with a proximal position of hydrogen and the secondary alkylzinc bicarbonate with a distal position of hydrogen, most likely proceeds through internal rotation of the dinuclear bicarbonate.

tert-Butyl(tert-butoxy)zinc hydroxides: hybrid models for single-source precursors of ZnO nanocrystals.

Alkylzinc alkoxides, [RZnOR']4, have received much attention as efficient precursors of ZnO nanocrystals (NCs), and their "Zn4O4 " heterocubane core has been regarded as a "preorganized ZnO". A comprehensive investigation of the synthesis and characterization of a new family of tert-butyl(tert-butoxy)zinc hydroxides, [(tBu)4 Zn4 (µ3-OtBu)x (µ3-OH)4-x], as model single-source precursors of ZnO NCs is reported. The direct reaction between well-defined [tBuZnOH]6 (16) and [tBuZnOtBu]4 (24) in various molar ratios allows the isolation of new mixed cubane aggregates as crystalline solids in a high yield: [(tBu)4 Zn4 (µ3-OtBu)3 (µ3-OH)] (3), [(tBu)4Zn4 (µ3-OtBu)2 (µ3-OH)2] (4), [(tBu)4 Zn4 (µ3-OtBu)(µ3-OH)3] (5). The resulting products were characterized in solution by (1) H NMR and IR spectroscopy, and in the solid state by single-crystal X-ray diffraction. The thermal transformations of 2-5 were monitored by in situ variable-temperature powder X-ray diffraction and thermogravimetric measurements. The investigation showed that the Zn-OH groups appeared to be a desirable feature for the solid-state synthesis of ZnO NCs that significantly decreased the decomposition temperature of crystalline precursors 3-5.

MOF functionalization via solvent-assisted ligand incorporation: phosphonates vs carboxylates.

Solvent-assisted ligand incorporation (SALI) is useful for functionalizing the channels of metal-organic framework (MOF) materials such as NU-1000 that offer substitutionally labile zirconium(IV) coordination sites for nonbridging ligands. Each of the 30 or so previous examples relied upon coordination of a carboxylate ligand to achieve incorporation. Here we show that, with appropriate attention to ligand/node stoichiometry, SALI can also be achieved with phosphonate-terminated ligands. Consistent with stronger M(IV) coordination of phosphonates versus carboxylates, this change extends the pH range for retention of incorporated ligands. The difference in coordination strength can be exploited to achieve stepwise incorporation of pairs of ligands-specifically, phosphonates species followed by carboxylate species-without danger of displacement of the first ligand type by the second. Diffuse reflectance infrared Fourier-transform spectroscopy suggests that the phosphonate ligands are connected to the MOF node as RPO2(OH)¯ species in a moiety that leaves a base-accessible -OH moiety on each bound phosphonate.

Beyond post-synthesis modification: evolution of metal-organic frameworks via building block replacement.

Metal-organic frameworks (MOFs) are hybrid porous materials with many potential applications, which intimately depend on the presence of chemical functionality either at the organic linkers and/or at the metal nodes. Functionality that cannot be introduced into MOFs directly via de novo syntheses can be accessed through post-synthesis modification (PSM) on the reactive moieties of the linkers and/or nodes without disrupting the metal-linker bonds. Even more intriguing methods that go beyond PSM are herein termed building block replacement (BBR) which encompasses (i) solvent-assisted linker exchange (SALE), (ii) non-bridging ligand replacement, and (iii) transmetalation. These one-step or tandem BBR processes involve exchanging key structural components of the MOF, which in turn should allow for the evolution of protoMOF structures (i.e., the utilization of a parent MOF as a template) to design MOFs composed of completely new components, presumably via single crystal to single crystal transformations. The influence of building block replacement on the stability and properties of MOFs will be discussed, and some insights into their mechanistic aspects are provided. Future perspectives providing a glimpse into how these techniques can lead to various unexplored areas of MOF chemistry are also presented.

Water-stable zirconium-based metal-organic framework material with high-surface area and gas-storage capacities.

We designed, synthesized, and characterized a new Zr-based metal-organic framework material, NU-1100, with a pore volume of 1.53 ccg(-1) and Brunauer-Emmett-Teller (BET) surface area of 4020 m(2) g(-1) ; to our knowledge, currently the highest published for Zr-based MOFs. CH4 /CO2 /H2 adsorption isotherms were obtained over a broad range of pressures and temperatures and are in excellent agreement with the computational predictions. The total hydrogen adsorption at 65 bar and 77 K is 0.092 g g(-1) , which corresponds to 43 g L(-1) . The volumetric and gravimetric methane-storage capacities at 65 bar and 298 K are approximately 180 vSTP /v and 0.27 g g(-1) , respectively.

Toward coordination polymers based on fine-tunable group 13 organometallic phthalates.

A family of group 13 organometallic macrocyclic phthalates [(MMe2)2(µ-O2C)2-1,2-C6H4]2 (where M = Al (1), Ga (2), In (3)) is prepared, and the reactivity of these homologous carboxylates toward various monodentate Lewis bases is investigated. The studies provide the first structurally characterized methylindium [{(Me2In)(µ-O2C)2-1,2-C6H4}{Me2In(THF)}]n (4) and methylaluminum [{(Me2Al)(µ-O2C)2-1,2-C6H4}{Me2Al(py-Me)}]n (5) 1D coordination polymers stabilized by dicarboxylate ligands as a result of disruption of the parent tetranuclear macrocyclic structural motifs in 3 and 1 by the incoming donor ligands. The molecular and crystal structures of the reported compounds are examined by spectroscopic studies and single-crystal X-ray diffraction.

Enhanced gas sorption properties and unique behavior toward liquid water in a pillared-paddlewheel metal-organic framework transmetalated with Ni(II).

The synthesis of a permanently porous pillared-paddlewheel metal-organic framework (MOF) was achieved through transmetalation of Zn(II) with Ni(II). The MOF can be treated with liquid water, leading to the reversible displacement of 50% of its pillars by water molecules and resulting in a most unusual crystalline and permanently porous structure.

Solvent-assisted linker exchange: an alternative to the de†novo synthesis of unattainable metal-organic frameworks.

Metal-organic frameworks (MOFs) have gained considerable attention as hybrid materials-in part because of a multitude of potential useful applications, ranging from gas separation to catalysis and light harvesting. Unfortunately, de novo synthesis of MOFs with desirable function-property combinations is not always reliable and may suffer from vagaries such as formation of undesirable topologies, low solubility of precursors, and loss of functionality of the sensitive network components. The recently discovered synthetic approach coined solvent-assisted linker exchange (SALE) constitutes a simple to implement strategy for circumventing these setbacks; its use has already led to the generation of a variety of MOF materials previously unobtainable by direct synthesis methods. This Review provides a perspective of the achievements in MOF research that have been made possible with SALE and examines the studies that have facilitated the understanding and broadened the scope of use of this invaluable synthetic tool.

From Chalcogen Bonding to S-π Interactions in Hybrid Perovskite Photovoltaics.

The stability of hybrid organic-inorganic halide perovskite semiconductors remains a significant obstacle to their application in photovoltaics. To this end, the use of low-dimensional (LD) perovskites, which incorporate hydrophobic organic moieties, provides an effective strategy to improve their stability, yet often at the expense of their performance. To address this limitation, supramolecular engineering of noncovalent interactions between organic and inorganic components has shown potential by relying on hydrogen bonding and conventional van der Waals interactions. Here, the capacity to access novel LD perovskite structures that uniquely assemble through unorthodox S-mediated interactions is explored by incorporating benzothiadiazole-based moieties. The formation of S-mediated LD structures is demonstrated, including one-dimensional (1D) and layered two-dimensional (2D) perovskite phases assembled via chalcogen bonding and S-π interactions, through a combination of techniques, such as single crystal and thin film X-ray diffraction, as well as solid-state NMR spectroscopy, complemented by molecular dynamics simulations, density functional theory calculations, and optoelectronic characterization, revealing superior conductivities of S-mediated LD perovskites. The resulting materials are applied in n-i-p and p-i-n perovskite solar cells, demonstrating enhancements in performance and operational stability that reveal a versatile supramolecular strategy in photovoltaics.

Perfluoroalkane functionalization of NU-1000 via solvent-assisted ligand incorporation: synthesis and CO2 adsorption studies.

A new functionalization technique, solvent-assisted ligand incorporation (SALI), was developed to efficiently incorporate carboxylate-based functionalities in the Zr-based metal-organic framework, NU-1000. Unlike previous metal node functionalization strategies, which utilize dative bonding to coordinatively unsaturated metal sites, SALI introduces functional groups as charge compensating and strongly bound moieties to the Zr6 node. Utilizing SALI, we have efficiently attached perfluoroalkane carboxylates of various chain lengths (C1-C9) on the Zr6 nodes of NU-1000. These fluoroalkane-functionalized mesoporous MOFs, termed herein SALI-n, were studied experimentally and theoretically as potential CO2 capture materials.

Vapor-phase metalation by atomic layer deposition in a metal-organic framework.

Metal-organic frameworks (MOFs) have received attention for a myriad of potential applications including catalysis, gas storage, and gas separation. Coordinatively unsaturated metal ions often enable key functional behavior of these materials. Most commonly, MOFs have been metalated from the condensed phase (i.e., from solution). Here we introduce a new synthetic strategy capable of metallating MOFs from the gas phase: atomic layer deposition (ALD). Key to enabling metalation by ALD In MOFs (AIM) was the synthesis of NU-1000, a new, thermally stable, Zr-based MOF with spatially oriented -OH groups and large 1D mesopores and apertures.

MOF/polymer hybrids through in situ free radical polymerization in metal-organic frameworks.

We use the free radical polymerization initiator 4,4'-azobis(cyanovaleric acid) coordinated to the open metal sites of metal-organic frameworks (MOFs) to give rise to highly uniform MOF/polymer hybrids. We demonstrate this strategy on two robust zirconium MOFs (NU-1000 and MOF-808), which are the most effective catalysts for degradation of chemical warfare nerve agents. The resulting hybrid materials maintain their hydrolytic catalytic activity and have substantially improved adhesion to polypropylene and activated carbon textile fibers, yielding highly robust MOF/polymer/textile hybrid systems. These composites are suitable for the green production of active protective clothing and filters capable of detoxifying organophosphorus warfare agents.

Opening ZIF-8: a catalytically active zeolitic imidazolate framework of sodalite topology with unsubstituted linkers.

A zeolitic imidazolate framework material of SOD topology possessing primarily unsubstituted imidazolate (im) linkers has been synthesized via solvent-assisted linker exchange (SALE) of ZIF-8. The structure of the new material, SALEM-2, has been confirmed through (1)H NMR and powder and single-crystal X-ray diffraction. SALEM-2 is the first example of a porous Zn(im)(2) ZIF possessing a truly zeolitic topology that can be obtained in bulk quantities. Upon treatment with n-butyllithium, the open analogue exhibits Brønsted base catalysis that cannot be accomplished by the parent material ZIF-8. Additionally, it displays a different size cutoff for uptake and release of molecular guests than does ZIF-8.