Lysyl oxidase like 2 is increased in asthma and contributes to asthmatic airway remodelling.

BACKGROUND: Airway smooth muscle (ASM) cells are fundamental to asthma pathogenesis, influencing bronchoconstriction, airway hyperresponsiveness and airway remodelling. The extracellular matrix (ECM) can influence tissue remodelling pathways; however, to date no study has investigated the effect of ASM ECM stiffness and cross-linking on the development of asthmatic airway remodelling. We hypothesised that transforming growth factor-ß (TGF-ß) activation by ASM cells is influenced by ECM in asthma and sought to investigate the mechanisms involved. METHODS: This study combines in vitro and in vivo approaches: human ASM cells were used in vitro to investigate basal TGF-ß activation and expression of ECM cross-linking enzymes. Human bronchial biopsies from asthmatic and nonasthmatic donors were used to confirm lysyl oxidase like 2 (LOXL2) expression in ASM. A chronic ovalbumin (OVA) model of asthma was used to study the effect of LOXL2 inhibition on airway remodelling. RESULTS: We found that asthmatic ASM cells activated more TGF-ß basally than nonasthmatic controls and that diseased cell-derived ECM influences levels of TGF-ß activated. Our data demonstrate that the ECM cross-linking enzyme LOXL2 is increased in asthmatic ASM cells and in bronchial biopsies. Crucially, we show that LOXL2 inhibition reduces ECM stiffness and TGF-ß activation in vitro, and can reduce subepithelial collagen deposition and ASM thickness, two features of airway remodelling, in an OVA mouse model of asthma. CONCLUSION: These data are the first to highlight a role for LOXL2 in the development of asthmatic airway remodelling and suggest that LOXL2 inhibition warrants further investigation as a potential therapy to reduce remodelling of the airways in severe asthma.

Assessing the immunosuppressive activity of alginate-encapsulated mesenchymal stromal cells on splenocytes.

Mesenchymal stromal cells (MSCs) show immunosuppressive effects both via cell-to-cell contact (direct) with immune cells and by producing paracrine factors and extracellular vesicles (indirect). A key challenge in delivering this therapeutic effect in vivo is retaining the MSCs at the site of injection. One way to address this is by encapsulating the MSCs within suitable biomaterial scaffolds. Here, we assess the immunosuppressive effect of alginate-encapsulated murine MSCs on proliferating murine splenocytes. Our results show that MSCs are able to significantly suppress splenocyte proliferation by ∼50% via the indirect mechanism and almost completely (∼98%) via the direct mechanism. We also show for the first time that MSCs as monolayers on tissue culture plastic or encapsulated within alginate, when physically isolated from the splenocytes via transwells, are able to sustain immunosuppressive activity with repeated exposure to fresh splenocytes, for as long as 9 days. These results indicate the need to identify design strategies to simultaneously deliver both modes of MSC immunosuppression. By designing cell-biomaterial constructs with tailored degradation profiles, we can achieve a more sustained (avoiding MSCs migration and apoptosis) and controlled release of both the paracrine signals and eventually the cells themselves enabling efficient MSC-based immunosuppressive therapies for wound healing.

Noninvasive detection and imaging of molecular markers in live cardiomyocytes derived from human embryonic stem cells.

Raman microspectroscopy (RMS) was used to detect and image molecular markers specific to cardiomyocytes (CMs) derived from human embryonic stem cells (hESCs). This technique is noninvasive and thus can be used to discriminate individual live CMs within highly heterogeneous cell populations. Principal component analysis (PCA) of the Raman spectra was used to build a classification model for identification of individual CMs. Retrospective immunostaining imaging was used as the gold standard for phenotypic identification of each cell. We were able to discriminate CMs from other phenotypes with >97% specificity and >96% sensitivity, as calculated with the use of cross-validation algorithms (target 100% specificity). A comparison between Raman spectral images corresponding to selected Raman bands identified by the PCA model and immunostaining of the same cells allowed assignment of the Raman spectral markers. We conclude that glycogen is responsible for the discrimination of CMs, whereas myofibril proteins have a lesser contribution. This study demonstrates the potential of RMS for allowing the noninvasive phenotypic identification of hESC progeny. With further development, such label-free optical techniques may enable the separation of high-purity cell populations with mature phenotypes, and provide repeated measurements to monitor time-dependent molecular changes in live hESCs during differentiation in vitro.

Techniques for analysing pattern formation in populations of stem cells and their progeny.

BACKGROUND: To investigate how patterns of cell differentiation are related to underlying intra- and inter-cellular signalling pathways, we use a stochastic individual-based model to simulate pattern formation when stem cells and their progeny are cultured as a monolayer. We assume that the fate of an individual cell is regulated by the signals it receives from neighbouring cells via either diffusive or juxtacrine signalling. We analyse simulated patterns using two different spatial statistical measures that are suited to planar multicellular systems: pair correlation functions (PCFs) and quadrat histograms (QHs). RESULTS: With a diffusive signalling mechanism, pattern size (revealed by PCFs) is determined by both morphogen decay rate and a sensitivity parameter that determines the degree to which morphogen biases differentiation; high sensitivity and slow decay give rise to large-scale patterns. In contrast, with juxtacrine signalling, high sensitivity produces well-defined patterns over shorter lengthscales. QHs are simpler to compute than PCFs and allow us to distinguish between random differentiation at low sensitivities and patterned states generated at higher sensitivities. CONCLUSIONS: PCFs and QHs together provide an effective means of characterising emergent patterns of differentiation in planar multicellular aggregates.

Patterning the mechanical properties of hydrogen silsesquioxane films using electron beam irradiation for application in mechano cell guidance.

Hydrogen silsesquioxane (HSQ) is a material with the potential for studying the effect of surface stiffness on stem cell differentiation. Here, the effects of electron beam dose on the topography and the mechanical properties of HSQ obtained with or without trimethylamine (TMA) development are characterised by atomic force microscopy imaging and indentation. A correlation between the surface stiffness (uniform across the sample) and electron beam exposure is observed. Surface roughness of HSQ samples developed in TMA decreases exponentially with increasing electron beam exposure. Surface coating with plasma polymerised allylamine (ppAAm) leads to an overall decrease in stiffness values. However, the increase in surface stiffness with increasing electron beam exposure is still evident. The ppAAm coating is shown to facilitate human mesenchymal stem cell adhesion.

Maintenance of pluripotency in human embryonic stem cells cultured on a synthetic substrate in conditioned medium.

Realizing the potential clinical and industrial applications of human embryonic stem cells (hESCs) is limited by the need for costly, labile, or undefined growth substrates. Here we demonstrate that trypsin passaging of the hESC lines, HUES7 and NOTT1, on oxygen plasma etched tissue culture polystyrene (PE-TCPS) in conditioned medium is compatible with pluripotency. This synthetic culture surface is stable at room temperature for at least a year and is readily prepared by placing polystyrene substrates in a radio frequency oxygen plasma generator for 5 min. Modification of the polystyrene surface chemistry by plasma etching was confirmed by X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS), which identified elemental and molecular changes as a result of the treatment. Pluripotency of hESCs cultured on PE-TCPS was gauged by consistent proliferation during serial passage, expression of stem cell markers (OCT4, TRA1-60, and SSEA-4), stable karyotype and multi-germlayer differentiation in vitro, including to pharmacologically responsive cardiomyocytes. Generation of cost-effective, easy-to-handle synthetic, defined, stable surfaces for hESC culture will expedite stem cell use in biomedical applications.

Stem cells: The therapeutic role in the treatment of diabetes mellitus.

The unlimited proliferative ability and plasticity to generate other cell types ensures that stem cells represent a dynamic system apposite for the identification of new molecular targets and the production and development of novel drugs. These cell lines derived from embryos could be used as a model for the study of basic and applied aspects in medical therapeutics, environmental mutagenesis and disease management. As a consequence, these can be tested for safety or to predict or anticipate potential toxicity in humans. Human ES cell lines may, therefore, prove clinically relevant to the development of safer and more effective drugs for patients presenting with diabetes mellitus.

Localized Induction of Gene Expression in Embryonic Stem Cell Aggregates Using Holographic Optical Tweezers to Create Biochemical Gradients.

Three-dimensional (3D) cell models that mimic the structure and function of native tissues are enabling more detailed study of physiological and pathological mechanisms in vitro. We have previously demonstrated the ability to build and manipulate 3D multicellular microscopic structures using holographic optical tweezers (HOTs). Here, we show the construction of a precisely patterned 3D microenvironment and biochemical gradient model consisting of mouse embryoid bodies (mEBs) and polymer microparticles loaded with retinoic acid (RA), embedded in a hydrogel. We demonstrate discrete, zonal expression of the RA-inducible protein Stra8 within mEBs in response to release of RA from polymer microparticles, corresponding directly to the defined 3D positioning of the microparticles using HOTs. These results demonstrate the ability of this technology to create chemical microgradients at definable length scales and to elicit, with fidelity and precision, specific biological responses. This technique can be used in the study of in vitro microenvironments to enable new insights on 3D cell models, their cellular assembly, and the delivery of drug or biochemical molecules for engineering and interrogation of functional and morphogenic responses. Graphical abstract.

Clinical applications of musculoskeletal tissue engineering.

BACKGROUND: Current surgical techniques for the repair of the musculoskeletal system can be often limited by the availability, quality and quantity of materials, such as grafts to effect repair. This has led to the exploration and development of novel methods of intervention based on tissue engineering and regenerative medicine. SOURCE OF DATA: This review summarizes the successes and investigations which are happening to date in the field of musculoskeletal tissue engineering. This is based on an extensive literature search and through basic research being performed by the authors. AREAS OF AGREEMENT: Due to the constraints surrounding certain surgical techniques and restrictions on their use, novel procedures are required for the repair and regeneration of damaged tissues. AREAS OF CONTROVERSY: The choice of cell type has caused much debate within the tissue-engineering field. However it is widely accepted that currently only autologous primary/adult stem cells are fit for transplantation, until such times that optimized differentiation and selection protocols exist for embryonic stem cells. GROWING POINTS: The current results of the clinical cases utilizing tissue engineered constructs for bone and cartilage repair provide insights for improvement of these techniques thus allowing treatments to become increasingly viable. AREAS TIMELY FOR DEVELOPING RESEARCH: There is a need to better understand the integration of scaffolds and cell populations into the target tissue. This should provide vital information influencing scaffold manufacturing procedures and cell selection.

Tissue engineering: strategies, stem cells and scaffolds.

Tissue engineering scaffolds are designed to influence the physical, chemical and biological environment surrounding a cell population. In this review we focus on our own work and introduce a range of strategies and materials used for tissue engineering, including the sources of cells suitable for tissue engineering: embryonic stem cells, bone marrow-derived mesenchymal stem cells and cord-derived mesenchymal stem cells. Furthermore, we emphasize the developments in custom scaffold design and manufacture, highlighting laser sintering, supercritical carbon dioxide processing, growth factor incorporation and zoning, plasma modification of scaffold surfaces, and novel multi-use temperature-sensitive injectable materials.

Characterization of human fetal osteoblasts by microarray analysis following stimulation with 58S bioactive gel-glass ionic dissolution products.

Bioactive glasses dissolve upon immersion in culture medium, releasing their constitutive ions in solution. There is evidence suggesting that these ionic dissolution products influence osteoblast-specific processes. Here, we investigated the effect of 58S sol-gel-derived bioactive glass (60 mol % SiO2, 36 mol % CaO, 4 mol % P2O5) dissolution products on primary osteoblasts derived from human fetal long bone explant cultures (hFOBs). We used U133A human genome GeneChip oligonucleotide arrays to examine 22,283 transcripts and variants, which represent over 18,000 well-substantiated human genes. Hybridization of samples (biotinylated cRNA) derived from monolayer cultures of hFOBs on the arrays revealed that 10,571 transcripts were expressed by these cells, with high confidence. These included transcripts representing osteoblast-related genes coding for growth factors and their associated molecules or receptors, protein components of the extracellular matrix (ECM), enzymes involved in degradation of the ECM, transcription factors, and other important osteoblast-associated markers. A 24-h treatment with a single dosage of ionic products of sol-gel 58S dissolution induced the differential expression of a number of genes, including IL-6 signal transducer/gp130, ISGF-3/STAT1, HIF-1 responsive RTP801, ERK1 p44 MAPK (MAPK3), MAPKAPK2, IGF-I and IGFBP-5. The over 2-fold up-regulation of gp130 and MAPK3 and down-regulation of IGF-I were confirmed by real-time RT-PCR analysis. These data suggest that 58S ionic dissolution products possibly mediate the bioactive effect of 58S through components of the IGF system and MAPK signaling pathways.

Dose- and time-dependent effect of bioactive gel-glass ionic-dissolution products on human fetal osteoblast-specific gene expression.

Bioactive glasses dissolve upon immersion in culture medium, and release their constitutive ions into solution. There has been some evidence suggesting that these ionic-dissolution products influence osteoblast-specific processes. Here, the effect of 58S sol-gel-derived bioactive glass (60% SiO(2), 36% CaO, 4% P(2)O(5), in molar percentage) on primary osteoblasts derived from human fetal long bone explant cultures is investigated, and it is hypothesized that critical concentrations of sol-gel-dissolution products (consisting of a combination of simple inorganic ions) can enhance osteoblast phenotype in vitro by affecting the expression of a number of genes associated with the differentiation and extracellular matrix deposition processes. Cells were exposed to a range of 58S dosages continuously for a period of 4-14 days in monolayer cultures. Quantitative real-time RT-PCR analysis of a panel of osteoblast-specific markers showed a varied gene expression pattern in response to the material. The highest concentration of Ca and Si tested (96 and 50 ppm, respectively) promoted upregulation of gene expression for most markers (including alkaline phosphatase, osteocalcin, and osteopontin) at the latest time point, compared to non-58S-treated control, although this observation was not statistically significant. The same 58S concentration produced higher ALP activity levels and increased proliferation throughout the culture period, compared to lower dosages tested; however, the results generated were again not statistically significant. The data overall suggest that no significant effect can be ascribed to the ionic products of 58S bioactive gel-glass dissolution tested here and their ability to stimulate osteoblastic marker gene expression.

3D chemical characterization of frozen hydrated hydrogels using ToF-SIMS with argon cluster sputter depth profiling.

Hydrogels have been used extensively in bioengineering as artificial cell culture supports. Investigation of the interrelationship between cellular response to the hydrogel and its chemistry ideally requires methods that allow characterization without labels and can map species in three-dimensional to follow biomolecules adsorbed to, and absorbed into, the open structure before and during culture. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) has the potential to be utilized for through thickness characterization of hydrogels. The authors have established a simple sample preparation procedure to successfully achieve analysis of frozen hydrated hydrogels using ToF-SIMS without the need for dry glove box entry equipment. They demonstrate this on a poly(2-hydroxyethyl methacrylate) (pHEMA) film where a model protein (lysozyme) is incorporated using two methods to demonstrate how protein distribution can be determined. A comparison of lysozyme incorporation is made between the situation where the protein is present in a polymer dip coating solution and where lysozyme is in an aqueous medium in which the film is incubated. It is shown that protonated water clusters H(H2O)n (+) where n = 5-11 that are indicative of ice are detected through the entire thickness of the pHEMA. The lysozyme distribution through the pHEMA hydrogel films can be determined using the intensity of a characteristic amino acid secondary ion fragment.

Revealing cytokine-induced changes in the extracellular matrix with secondary ion mass spectrometry.

Cell-secreted matrices (CSMs), where extracellular matrix (ECM) deposited by monolayer cell cultures is decellularized, have been increasingly used to produce surfaces that may be reseeded with cells. Such surfaces are useful to help us understand cell-ECM interactions in a microenvironment closer to the in vivo situation than synthetic substrates with adsorbed proteins. We describe the production of CSMs from mouse primary osteoblasts (mPObs) exposed to cytokine challenge during matrix secretion, mimicking in vivo inflammatory environments. Time-of-flight secondary ion mass spectrometry data revealed that CSMs with cytokine challenge at day 7 or 12 of culture can be chemically distinguished from one another and from untreated CSM using multivariate analysis. Comparison of the differences with reference spectra from adsorbed protein mixtures points towards cytokine challenge resulting in a decrease in collagen content. This is supported by immunocytochemical and histological staining, demonstrating a 44% loss of collagen mass and a 32% loss in collagen I coverage. CSM surfaces demonstrate greater cell adhesion than adsorbed ECM proteins. When mPObs were reseeded onto cytokine-challenged CSMs they exhibited reduced adhesion and elongated morphology compared to untreated CSMs. Such changes may direct subsequent cell fate and function, and provide insights into pathological responses at sites of inflammation.

Investigation of localized delivery of diclofenac sodium from poly(D,L-lactic acid-co-glycolic acid)/poly(ethylene glycol) scaffolds using an in vitro osteoblast inflammation model.

Nonunion fractures and large bone defects are significant targets for osteochondral tissue engineering strategies. A major hurdle in the use of these therapies is the foreign body response of the host. Herein, we report the development of a bone tissue engineering scaffold with the ability to release anti-inflammatory drugs, in the hope of evading this response. Porous, sintered scaffolds composed of poly(D,L-lactic acid-co-glycolic acid) (PLGA) and poly(ethylene glycol) (PEG) were prepared with and without the anti-inflammatory drug diclofenac sodium. Analysis of drug release over time demonstrated a profile suitable for the treatment of acute inflammation with ∼80% of drug released over the first 4 days and a subsequent release of around 0.2% per day. Effect of drug release was monitored using an in vitro osteoblast inflammation model, comprised of mouse primary calvarial osteoblasts stimulated with proinflammatory cytokines interleukin-1ß (IL-1ß), tumor necrosis factor-α (TNF-α), and interferon-γ (IFN-γ). Levels of inflammation were monitored by cell viability and cellular production of nitric oxide (NO) and prostaglandin E2 (PGE2). The osteoblast inflammation model revealed that proinflammatory cytokine addition to the medium reduced cell viability to 33%, but the release of diclofenac sodium from scaffolds inhibited this effect with a final cell viability of ∼70%. However, releasing diclofenac sodium at high concentrations had a toxic effect on the cells. Proinflammatory cytokine addition led to increased NO and PGE2 production; diclofenac-sodium-releasing scaffolds inhibited NO release by ∼64% and PGE2 production by ∼52%, when the scaffold was loaded with the optimal concentration of drug. These observations demonstrate the potential use of PLGA/PEG scaffolds for localized delivery of anti-inflammatory drugs in bone tissue engineering applications.

Precision assembly of complex cellular microenvironments using holographic optical tweezers.

The accurate study of cellular microenvironments is limited by the lack of technologies that can manipulate cells in 3D at a sufficiently small length scale. The ability to build and manipulate multicellular microscopic structures will facilitate a more detailed understanding of cellular function in fields such as developmental and stem cell biology. We present a holographic optical tweezers based technology to accurately generate bespoke cellular micro-architectures. Using embryonic stem cells, 3D structures of varying geometries were created and stabilized using hydrogels and cell-cell adhesion methods. Control of chemical microenvironments was achieved by the temporal release of specific factors from polymer microparticles positioned within these constructs. Complex co-culture micro-environmental analogues were also generated to reproduce structures found within adult stem cell niches. The application of holographic optical tweezers-based micromanipulation will enable novel insights into biological microenvironments by allowing researchers to form complex architectures with sub-micron precision of cells, matrices and molecules.

Differentiation of osteoblasts from murine embryonic stem cells by overexpression of the transcriptional factor osterix.

Osterix is a transcription factor crucial for the normal development of the osteoblast. Here we have investigated whether the osteogenic differentiation of murine embryonic stem (ES) cells can be induced by overexpression of osterix. Differentiation was initiated by formation of embryoid bodies (EB) which were then dispersed and cultured in alpha-minimum essential medium supplemented with L-ascorbate phosphate and alpha-glycerophosphate for up to 21 days. osterix was found to induce expression of several osteoblast-specific markers, as confirmed by immunostaining and real-time RT-PCR. The expression of genes encoding osteocalcin and Cbfa1 was upregulated and the formation of mineralized bone nodules was significantly increased by osterix transfection. In combination with dexamethasone, bone nodule formation was further increased in osterix-transfected cells. Expression of both Sox-9 and PPAR-gamma, genes that are associated with chondrocyte and adipocyte differentiation, was initially increased in the osterix-transfected cells but was downregulated after day 7. This suggests that the process of osterix-induced differentiation of ES cells involves transition through an intermediate bi- or tripotential progenitor cell population. In conclusion, this cell differentiation strategy is useful not only for generating osteoblastic cells from ES cells, but also for investigating factors that influence this process and potentially delineating the ontogeny of the osteoblast.

In vitro differentiation and in vivo mineralization of osteogenic cells derived from human embryonic stem cells.

The first report of the derivation of embryonic stem (ES) cell lines from human blastocysts had major implications for research into developmental biology and regenerative medicine. Finding efficient and reproducible methods to derive therapeutically useful cells from an ES cell source is a key feature of many regenerative medicine strategies. We have previously demonstrated that it is possible to induce osteogenic differentiation of murine ES cells by supplementing the culture medium with ascorbic acid, beta-glycerophosphate, and dexamethasone. This study investigated whether methods for driving osteogenic differentiation developed with murine ES cells could be applied successfully to human ES cells. The H1 line was propagated in vitro on murine feeder layers and shown to be pluripotent by expression of the markers Oct-4 and SSEA-4. Subsequently, differentiation was initiated via embryoid body (EB) formation and, after 5 days in suspension culture, cells harvested from EBs were replated in a medium containing osteogenic supplements. We found that the treatment regimen previously identified as optimal for murine ES cells, and in particular the addition of dexamethasone at specific time points, also induced the greatest osteogenic response from human ES cells. We identified mineralizing cells in vitro that immunostained positively for osteocalcin and found an increase in expression of an essential bone transcription factor, Runx2. When implanted into SCID mice on a poly-D, L-lactide (PDLLA) scaffold, the cells had the capacity to give rise to mineralized tissue in vivo. After 35 days of implantation, regions of mineralized tissue could be identified within the scaffold by von Kossa staining and immunoexpression of the human form of osteocalcin. We did not see any evidence of teratoma formation. These data therefore demonstrate the derivation of osteoblasts from pluripotent human ES cells with the capacity to form mineralized tissue both in vitro and in vivo. We have also shown that a culture methodology established for differentiation of murine ES cells was entirely transferable to human ES cells. Further development of this technology will result in the capacity to generate sufficient yields of osteogenic cells for use in skeletal tissue repair.

Pelvic nerve plexus trauma at radical and simple hysterectomy: a quantitative study of nerve types in the uterine supporting ligaments.

OBJECTIVE: Using neuropeptide and enzyme markers to autonomic nerves, we sought to demonstrate and quantify the nerve types contained within the uterosacral ligaments (USLs) and cardinal ligaments (CLs) that are divided during radical hysterectomy (RH). METHODS: Cross-sectional biopsies were collected from the lateral third of the USL and the CL in 24 women who had an RH for cervical cancer, and from the uterine insertion of these ligaments in 11 women who had a simple hysterectomy for benign disease. We applied indirect immunofluorescence with FITC-conjugated secondary antibodies, using polyclonal primary antibodies to neuropeptide markers that predominate within somatic and autonomic nerves, to show different populations of the following nerve types within the biopsies: neuropeptide Y (NPY) and tyrosine hydroxylase (TH) for sympathetic nerves; vasoactive intestinal polypeptide (VIP) for parasympathetic nerves; substance P (SP) for nociceptive and sensory-motor nerves; and calcitonin gene-related peptide (CGRP) for sensory and sensory-motor nerves. The percentage area of immunoreactivity (PAI), determined by a computer-assisted image analyzer attached to a fluorescent microscope, was used as an objective quantitative measure of nerve density. Confocal microscopy was used to determine the composition and spatial arrangement of nerve fibers in the ligaments. RESULTS: The PAI was greater for all markers tested in both the USL and CL (P <.001) in RH compared with simple hysterectomy biopsies. For RH specimens, the PAI was greater for the sympathetic, sensory, and sensory-motor nerve markers in the USL compared with the CL (P <.01), but the PAI for VIP was similar (P >.05). Conversely, excluding the large trunks and associated ganglia, the free nerve fiber PAI in the CL was greater than that of the USL for all nerve markers (P <.001). The staining of peripheral autonomic ganglia and associated fibers, for NPY and TH, indicates that some sympathetic nerves are preganglionic with their cell bodies within the pelvic plexus. CONCLUSIONS: Significantly more autonomic nerves are transected in the more lateral division of the uterine supporting ligaments during a radical hysterectomy than during a simple hysterectomy. Sympathetic, parasympathetic, sensory, and sensory-motor nerve types are present within the CL and USL. The proportions of each nerve type differ between the two ligaments, and sympathetic nerves in the USL are the single largest nerve type. The uterine supporting ligaments are a major pathway for autonomic nerves to the pelvic organs.

Tissue engineering and ENT surgery.

Tissue engineering is the development of biological substitutes for the repair and regeneration of damaged tissues. We explain the principles of this emerging field of biotechology. The present and potential applications of tissue engineering technologies in ENT surgery are then reviewed.