Stabilization of Naphthalene Diimide Anions by Ion Pair Formation in Nonaqueous Organic Redox Flow Batteries.

In redox flow batteries, a compelling strategy for enhancing the charge capacity of redox-active organic molecules involves storing multiple electrons within a single molecule. However, this approach poses unique challenges such as chemical instability by forming radicals, elevated energy requirements, and unsustainable charge concentration. Ion pairing is a possible solution to achieve charge neutrality and engineer redox potential shifts but has received limited attention. In this study, we demonstrate that Li+ can stabilize naphthalene diimide (NDI) anions dissolved in acetonitrile and significantly shift the second cathodic potential close to the first. Our findings, supported by density functional theory calculations and Fourier transform infrared spectroscopy, indicate that dimeric NDI species form stable ion pairs with Li+. Conversely, K+ ions exhibit weak interactions, and cyclic voltammograms confirm significant potential shifts when stronger Lewis acids and solvents with lower donor numbers are employed. Galvanostatic examinations reveal a single voltage plateau with Li+, which indicates a rapid redox process involving doubly charged NDI2- with Li+. These aggregated ion pairs offer the additional benefits of hindering crossover events, contributing to excellent cyclability, and suppressing undesirable side reactions even after 1000 redox cycles.

Trapping of Stable [4n+1] π-Electron Species from Peripherally Substituted, Conformationally Rigid, Antiaromatic Hexaphyrins.

Peripherally substituted antiaromatic naphthorosarins have been synthesized for the first time. The synthesis was accomplished by acid-catalyzed condensation of naphthobipyrrole building blocks with aromatic aldehydes. The naphthobipyrrole building blocks were synthesized by simple oxidative coupling of the corresponding pyrrole substituted aromatics. Solid-state structural analyses of the synthesized naphthorosarins revealed that the presence of meso-2,6-dichlorophenyl- and 5,6-difluoro-substitution substantially alter the geometry and properties of the naphthorosarins. The substituents affect the redox potentials as well and, in turn, the proton-coupled electron-transfer processes leading to the formation of one- and two-electron reduced forms of the corresponding naphthorosarins. One particular naphthorosarin that bears both peripheral fluorine and meso-2,6-dichlorophenyl substituents forms a stable 25 π-electron species upon treating with TFA that was characterized by single-crystal X-ray diffraction analysis. The current study underscores how structural modifications can be used to fine-tune the electronic features of naphthorosarins, including stabilization of odd electron species.

Determining the Facile Routes for Oxygen Evolution Reaction by In Situ Probing of Li-O2 Cells with Conformal Li2O2 Films.

An ongoing challenge with lithium-oxygen (Li-O2) batteries is in deciphering the oxygen evolution reaction (OER) process related to the slow decomposition of the insulating lithium peroxide (Li2O2). Herein, we shed light on the behavior of Li2O2 oxidation by exploiting various in situ imaging, gas analysis, and electrochemical methods. At the low potentials 3.2-3.7 V (vs Li/Li+), OER is exclusive to the thinner parts of the Li2O2 deposits, which leads to O2 gas evolution, followed by the concomitant release of superoxide species. At higher potentials, OER initiates at the sidewalls of the thicker Li2O2. The succeeding lateral decomposition of Li2O2 indicates the preferential Li+ and charge transport occurring at the sidewalls of Li2O2. To ameliorate the OER rate, we also investigate an alternative approach of rerouting charge carriers by using soluble redox mediators. Our in situ probes provide insights into the favorable charge-transport routes that can aid in promoting Li2O2 decomposition.

Unexpected Li2O2 Film Growth on Carbon Nanotube Electrodes with CeO2 Nanoparticles in Li-O2 Batteries.

In lithium-oxygen (Li-O2) batteries, it is believed that lithium peroxide (Li2O2) electrochemically forms thin films with thicknesses less than 10 nm resulting in capacity restrictions due to limitations in charge transport. Here we show unexpected Li2O2 film growth with thicknesses of ∼60 nm on a three-dimensional carbon nanotube (CNT) electrode incorporated with cerium dioxide (ceria) nanoparticles (CeO2 NPs). The CeO2 NPs favor Li2O2 surface nucleation owing to their strong binding toward reactive oxygen species (e.g., O2 and LiO2). The subsequent film growth results in thicknesses of ∼40 nm (at cutoff potential of 2.2 V vs Li/Li(+)), which further increases up to ∼60 nm with the addition of trace amounts of H2O that enhances the solution free energy. This suggests the involvement of solvated superoxide species (LiO2(sol)) that precipitates on the existing Li2O2 films to form thicker films via disproportionation. By comparing toroidal Li2O2 formed solely from LiO2(sol), the thick Li2O2 films formed from surface-mediated nucleation/thin-film growth following by LiO2(sol) deposition provides the benefits of higher reversibility and rapid surface decomposition during recharge.

A chemistry and material perspective on lithium redox flow batteries towards high-density electrical energy storage.

Electrical energy storage system such as secondary batteries is the principle power source for portable electronics, electric vehicles and stationary energy storage. As an emerging battery technology, Li-redox flow batteries inherit the advantageous features of modular design of conventional redox flow batteries and high voltage and energy efficiency of Li-ion batteries, showing great promise as efficient electrical energy storage system in transportation, commercial, and residential applications. The chemistry of lithium redox flow batteries with aqueous or non-aqueous electrolyte enables widened electrochemical potential window thus may provide much greater energy density and efficiency than conventional redox flow batteries based on proton chemistry. This Review summarizes the design rationale, fundamentals and characterization of Li-redox flow batteries from a chemistry and material perspective, with particular emphasis on the new chemistries and materials. The latest advances and associated challenges/opportunities are comprehensively discussed.

A 3.5 V lithium-iodine hybrid redox battery with vertically aligned carbon nanotube current collector.

A lithium-iodine (Li-I2) cell using the triiodide/iodide (I3(-)/I(-)) redox couple in an aqueous cathode has superior gravimetric and volumetric energy densities (∼ 330 W h kg(-1) and ∼ 650 W h L(-1), respectively, from saturated I2 in an aqueous cathode) to the reported aqueous Li-ion batteries and aqueous cathode-type batteries, which provides an opportunity to construct cost-effective and high-performance energy storage. To apply this I3(-)/I(-) aqueous cathode for a portable and compact 3.5 V battery, unlike for grid-scale storage as general target of redox flow batteries, we use a three-dimensional and millimeter thick carbon nanotube current collector for the I3(-)/I(-) redox reaction, which can shorten the diffusion length of the redox couple and provide rapid electron transport. These endeavors allow the Li-I2 battery to enlarge its specific capacity, cycling retention, and maintain a stable potential, thereby demonstrating a promising candidate for an environmentally benign and reusable portable battery.

Promoting formation of noncrystalline Li2O2 in the Li-O2 battery with RuO2 nanoparticles.

Low electrical efficiency for the lithium-oxygen (Li-O2) electrochemical reaction is one of the most significant challenges in current nonaqueous Li-O2 batteries. Here we present ruthenium oxide nanoparticles (RuO2 NPs) dispersed on multiwalled carbon nanotubes (CNTs) as a cathode, which dramatically increase the electrical efficiency up to 73%. We demonstrate that the RuO2 NPs contribute to the formation of poorly crystalline lithium peroxide (Li2O2) that is coated over the CNT with large contact area during oxygen reduction reaction (ORR). This unique Li2O2 structure can be smoothly decomposed at low potential upon oxygen evolution reaction (OER) by avoiding the energy loss associated with the decomposition of the more typical Li2O2 structure with a large size, small CNT contact area, and insulating crystals.

Constructing Reversible Li Deposition Interfaces by Tailoring Lithiophilic Functionalities of a Heteroatom-Doped Graphene Interlayer for Highly Stable Li Metal Anodes.

Lithium (Li) metal has been regarded as the ideal anode for rechargeable batteries due to its low reduction potential and high theoretical capacity. However, the formation of fatal Li dendrites during repeated cycling shortens the battery life and causes serious safety concerns. Functionalized separators with electrically conductive and lithiophilic coating layers potentially inhibit dendrite formation and growth on Li metal anodes by providing nucleation sites for reversible Li deposition/stripping. In this work, we propose functionalized separators incorporating heteroatom-doped (N or B) graphene interlayers to modulate the Li nucleation behavior. The electronegative N-doping and electropositive B-doping were investigated to understand their regulation of the Li deposition behavior. With the heteroatom-doped graphene-coated separators, we observe significantly improved cycling stability along with enhanced charge transfer kinetics and low Li nucleation overpotential. This is attributed to the heteroatom-doped graphene interlayer expanding the surface area of the Li metal anode while providing additional space for uniform Li deposition/stripping, thus preventing undesirable side reactions. As a result, the formation of dendrites and pits on the Li metal anode surface is suppressed, demonstrating the protective effect of the Li metal anode. Interestingly, N-doped graphene-coated separators exhibit lower Li nucleation overpotentials than B-doped graphene-coated separators but rather lower average Coulombic efficiencies and reduced cycling stability. This implies that adequate adsorption on B-based sites, as opposed to the strong adsorption on N-based sites, improves the reversibility. Notably, the Li adsorption strength of the lithiophilic functional groups critically affects the reversibility, as observed by Li nucleation barrier measurements and atomistic simulations. This work suggests that interface engineering using conductive and lithiophilic materials can be a promising strategy for controlling Li deposition in advanced Li metal batteries.

Identifying the active sites and intermediates on copper surfaces for electrochemical nitrate reduction to ammonia.

Copper (Cu) is a widely used catalyst for the nitrate reduction reaction (NO3RR), but its susceptibility to surface oxidation and complex electrochemical conditions hinders the identification of active sites. Here, we employed electropolished metallic Cu with a predominant (100) surface and compared it to native oxide-covered Cu. The electropolished Cu surface rapidly oxidized after exposure to either air or electrolyte solutions. However, this oxide was reduced below 0.1 V vs. RHE, thus returning to the metallic Cu before NO3RR. It was distinguished from the native oxide on Cu, which remained during NO3RR. Fast NO3- and NO reduction on the metallic Cu delivered 91.5 ± 3.7% faradaic efficiency for NH3 at -0.4 V vs. RHE. In contrast, the native oxide on Cu formed undesired products and low NH3 yield. Operando shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) analysis revealed the adsorbed NO3-, NO2, and NO species on the electropolished Cu as the intermediates of NH3. Low overpotential NO3- and NO adsorptions and favorable NO reduction are key to increased NH3 productivity over Cu samples, which was consistent with the DFT calculation on Cu(100).

In situ AFM imaging of Li-O2 electrochemical reaction on highly oriented pyrolytic graphite with ether-based electrolyte.

Understanding the lithium-oxygen (Li-O2) electrochemical reaction is of importance to improve reaction kinetics, efficiency, and mitigate parasitic reactions, which links to the strategy of enhanced Li-O2 battery performance. Many in situ and ex situ analyses have been reported to address chemical species of reduction intermediate and products, whereas details of the dynamic Li-O2 reaction have not as yet been fully unraveled. For this purpose, visual imaging can provide straightforward evidence, formation and decomposition of products, during the Li-O2 electrochemical reaction. Here, we present real-time and in situ views of the Li-O2 reaction using electrochemical atomic force microscopy (EC-AFM). Details of the reaction process can be observed at nano-/micrometer scale on a highly oriented pyrolytic graphite (HOPG) electrode with lithium ion-containing tetraglyme, representative of the carbon cathode and ether-based electrolyte extensively employed in the Li-O2 battery. Upon oxygen reduction reaction (ORR), rapid growth of nanoplates, having axial diameter of hundreds of nanometers, length of micrometers, and ~5 nm thickness, at a step edge of HOPG can be observed, which eventually forms a lithium peroxide (Li2O2) film. This Li2O2 film is decomposed during the oxygen evolution reaction (OER), for which the decomposition potential is related to a thickness. There is no evidence of byproduct analyzed by X-ray photoelectron spectroscopy (XPS) after first reduction and oxidation reaction. However, further cycles provide unintended products such as lithium carbonate (Li2CO3), lithium acetate, and fluorine-related species with irregular morphology due to the degradation of HOPG electrode, tetraglyme, and lithium salt. These observations provide the first visualization of Li-O2 reaction process and morphological information of Li2O2, which can allow one to build strategies to prepare the optimum conditions for the Li-O2 battery.

Layered transition metal oxides (LTMO) for oxygen evolution reactions and aqueous Li-ion batteries.

This perspective paper comprehensively explores recent electrochemical studies on layered transition metal oxides (LTMO) in aqueous media and specifically encompasses two topics: catalysis of the oxygen evolution reaction (OER) and cathodes of aqueous lithium-ion batteries (LiBs). They involve conflicting requirements; OER catalysts aim to facilitate water dissociation, while for cathodes in aqueous LiBs it is essential to suppress water dissociation. The interfacial reactions taking place at the LTMO in these two distinct systems are of particular significance. We show various strategies for designing LTMO materials for each desired aim based on an in-depth understanding of electrochemical interfacial reactions. This paper sheds light on how regulating the LTMO interface can contribute to efficient water splitting and economical energy storage, all with a single material.

Controlling π-π Interactions of Highly Soluble Naphthalene Diimide Derivatives for Neutral pH Aqueous Redox Flow Batteries.

Organic redox-active molecules are a promising platform for designing sustainable, cheap, and safe charge carriers for redox flow batteries. However, radical formation during the electron-transfer process causes severe side reactions and reduces cyclability. This problem is mitigated by using naphthalene diimide (NDI) molecules and regulating their π-π interactions. The long-range π-stacking of NDI molecules, which leads to precipitation, is disrupted by tethering four ammonium functionalities, and the solubility approaches 1.5 m in water. The gentle π-π interactions induce clustering and disassembling of the NDI molecules during the two-electron transfer processes. When the radical anion forms, the antiferromagnetic coupling develops tetramer and dimer and nullifies the radical character. In addition, short-range-order NDI clusters at 1 m concentration are not precipitated but inhibit crossover. They are disassembled in the subsequent electron-transfer process, and the negatively charged NDI core strongly interacts with ammonium groups. These behaviors afford excellent RFB performance, demonstrating 98% capacity retention for 500 cycles at 25 mA cm-2 and 99.5% Coulombic efficiency with 2 m electron storage capacity.

Anion-Induced Interfacial Liquid Layers on LiCoO2 in Salt-in-Water Lithium-Ion Batteries.

The incompatibility of lithium intercalation electrodes with water has impeded the development of aqueous Li-ion batteries. The key challenge is protons which are generated by water dissociation and deform the electrode structures through intercalation. Distinct from previous approaches utilizing large amounts of electrolyte salts or artificial solid-protective films, we developed liquid-phase protective layers on LiCoO2 (LCO) using a moderate concentration of 0.5∼3 mol kg-1 lithium sulfate. Sulfate ion strengthened the hydrogen-bond network and easily formed ion pairs with Li+, showing strong kosmotropic and hard base characteristics. Our quantum mechanics/molecular mechanics (QM/MM) simulations revealed that sulfate ion paired with Li+ helped stabilize the LCO surface and reduced the density of free water in the interface region below the point of zero charge (PZC) potential. In addition, in situ electrochemical surface-enhanced infrared absorption spectroscopy (SEIRAS) proved the appearance of inner-sphere sulfate complexes above the PZC potential, serving as the protective layers of LCO. The role of anions in stabilizing LCO was correlated with kosmotropic strength (sulfate > nitrate > perchlorate > bistriflimide (TFSI-)) and explained better galvanostatic cyclability in LCO cells.

Correlating Nanoscale Structures with Electrochemical Properties of Solid Electrolyte Interphases in Solid-State Battery Electrodes.

Here, we investigate the nonlinear relationship between the content of solid electrolytes in composite electrodes and the irreversible capacity via the degree of nanoscale uniformity of the surface morphology and chemical composition of the solid electrolyte interphase (SEI) layer. Using electrochemical strain microscopy (ESM) and X-ray photoelectron spectroscopy (XPS), changes of the chemical composition and morphology (Li and F distribution) in SEI layers on the electrodes as a function of solid electrolyte contents are analyzed. As a result, we find that the solid electrolyte content affects the variation of the SEI layer thickness and chemical distributions of Li and F ions in the SEI layer, which, in turn, influence the Coulombic efficiency. This correlation determines the composition of the composite electrode surface that can maximize the physical and chemical uniformity of the solid electrolyte on the electrode, which is a key parameter to increase electrochemical performance in solid-state batteries.

Unexpectedly Large Contribution of Oxygen to Charge Compensation Triggered by Structural Disordering: Detailed Experimental and Theoretical Study on a Li3NbO4-NiO Binary System.

Dependence on lithium-ion batteries for automobile applications is rapidly increasing. The emerging use of anionic redox can boost the energy density of batteries, but the fundamental origin of anionic redox is still under debate. Moreover, to realize anionic redox, many reported electrode materials rely on manganese ions through π-type interactions with oxygen. Here, through a systematic experimental and theoretical study on a binary system of Li3NbO4-NiO, we demonstrate for the first time the unexpectedly large contribution of oxygen to charge compensation for electrochemical oxidation in Ni-based materials. In general, for Ni-based materials, e.g., LiNiO2, charge compensation is achieved mainly by Ni oxidation, with a lower contribution from oxygen. In contrast, for Li3NbO4-NiO, oxygen-based charge compensation is triggered by structural disordering and σ-type interactions with nickel ions, which are associated with a unique environment for oxygen, i.e., a linear Ni-O-Ni configuration in the disordered system. Reversible anionic redox with a small hysteretic behavior was achieved for LiNi2/3Nb1/3O2 with a cation-disordered Li/Ni arrangement. Further Li enrichment in the structure destabilizes anionic redox and leads to irreversible oxygen loss due to the disappearance of the linear Ni-O-Ni configuration and the formation of unstable Ni ions with high oxidation states. On the basis of these results, we discuss the possibility of using σ-type interactions for anionic redox to design advanced electrode materials for high-energy lithium-ion batteries.

Fe-N-modified multi-walled carbon nanotubes for oxygen reduction reaction in acid.

We report a facile synthesis of Fe-N-C catalysts based on the surface functionalization of multi-walled carbon nanotubes (MWCNTs), which show high activity and stability for oxygen reduction reaction (ORR) in acid. Fe-N-MWCNT catalysts, whose ORR mass activities could vary by 3-4 times depending on the choice of Fe precursors, were found to have considerably higher ORR mass activity and higher stability than N-modified MWCNTs (N-MWCNTs). The Fe-N-MWCNT catalyst with a dominant Fe-N(x) moiety (with x ≈ 4) and a surface Fe/C ratio of ∼0.004 exhibits the highest ORR mass activity in acid (∼0.7 mA mg(-1)(Fe-N-MWCNT) at 0.8 V vs. RHE), where the lower mass activity of other Fe-N-MWCNT catalysts can be attributed to lower Fe/C ratios and Fe-N(x) moieties (with x smaller than 4) as revealed from X-ray photoelectron spectroscopy (XPS) and extended X-ray absorption fine structure (EXAFS) spectroscopy. Moreover, the enhanced stability of Fe-N-MWCNTs in comparison to N-MWCNTs can be attributed to less H(2)O(2) production during ORR as determined from rotating ring disk electrode (RRDE) measurements, and higher activity for H(2)O(2) electro-reduction by rotating disk electrode (RDE) measurements. The large surface Fe/C ratio and Fe-N(x) moiety corresponding to high ORR activity and stability of Fe-N-MWCNTs demonstrate that surface functionalization can be very helpful to graft active catalytic sites onto carbon nanostructures, and to provide insights into the ORR mechanism of non-noble metal catalysts (NNMCs) for proton exchange membrane fuel cells (PEMFCs).

Reducing Time to Discovery: Materials and Molecular Modeling, Imaging, Informatics, and Integration.

Multiscale and multimodal imaging of material structures and properties provides solid ground on which materials theory and design can flourish. Recently, KAIST announced 10 flagship research fields, which include KAIST Materials Revolution: Materials and Molecular Modeling, Imaging, Informatics and Integration (M3I3). The M3I3 initiative aims to reduce the time for the discovery, design and development of materials based on elucidating multiscale processing-structure-property relationship and materials hierarchy, which are to be quantified and understood through a combination of machine learning and scientific insights. In this review, we begin by introducing recent progress on related initiatives around the globe, such as the Materials Genome Initiative (U.S.), Materials Informatics (U.S.), the Materials Project (U.S.), the Open Quantum Materials Database (U.S.), Materials Research by Information Integration Initiative (Japan), Novel Materials Discovery (E.U.), the NOMAD repository (E.U.), Materials Scientific Data Sharing Network (China), Vom Materials Zur Innovation (Germany), and Creative Materials Discovery (Korea), and discuss the role of multiscale materials and molecular imaging combined with machine learning in realizing the vision of M3I3. Specifically, microscopies using photons, electrons, and physical probes will be revisited with a focus on the multiscale structural hierarchy, as well as structure-property relationships. Additionally, data mining from the literature combined with machine learning will be shown to be more efficient in finding the future direction of materials structures with improved properties than the classical approach. Examples of materials for applications in energy and information will be reviewed and discussed. A case study on the development of a Ni-Co-Mn cathode materials illustrates M3I3's approach to creating libraries of multiscale structure-property-processing relationships. We end with a future outlook toward recent developments in the field of M3I3.

Synthesis of Redox-Active Phenanthrene-Fused Heteroarenes by Palladium-Catalyzed C-H Annulation.

Pd-catalyzed C-H annulation reactions of halo- and aryl-heteroarenes were developed using readily available o-bromobiaryls and o-dibromoaryls, respectively. A variety of five-membered heteroarenes rapidly provided the corresponding phenanthrene-fused heteroarenes, which led to the identification of phenanthro-pyrazole and thiazole as new, stable -2 V redox couples. The flexible syntheses and tunability of the redox potentials of these azole-fused phenanthrenes over a wide range are expected to facilitate their application as redox-active organic functional materials.

Lithium-Air Batteries: Air-Breathing Challenges and Perspective.

Lithium-oxygen (Li-O2) batteries have been intensively investigated in recent decades for their utilization in electric vehicles. The intrinsic challenges arising from O2 (electro)chemistry have been mitigated by developing various types of catalysts, porous electrode materials, and stable electrolyte solutions. At the next stage, we face the need to reform batteries by substituting pure O2 gas with air from Earth's atmosphere. Thus, the key emerging challenges of Li-air batteries, which are related to the selective filtration of O2 gas from air and the suppression of undesired reactions with other constituents in air, such as N2, water vapor (H2O), and carbon dioxide (CO2), should be properly addressed. In this review, we discuss all key aspects for developing Li-air batteries that are optimized for operating in ambient air and highlight the crucial considerations and perspectives for future air-breathing batteries.