Cryo-EM Structure and Assembly of an Extracellular Contractile Injection System.

Contractile injection systems (CISs) are cell-puncturing nanodevices that share ancestry with contractile tail bacteriophages. Photorhabdus virulence cassette (PVC) represents one group of extracellular CISs that are present in both bacteria and archaea. Here, we report the cryo-EM structure of an intact PVC from P. asymbiotica. This over 10-MDa device resembles a simplified T4 phage tail, containing a hexagonal baseplate complex with six fibers and a capped 117-nanometer sheath-tube trunk. One distinct feature of the PVC is the presence of three variants for both tube and sheath proteins, indicating a functional specialization of them during evolution. The terminal hexameric cap docks onto the topmost layer of the inner tube and locks the outer sheath in pre-contraction state with six stretching arms. Our results on the PVC provide a framework for understanding the general mechanism of widespread CISs and pave the way for using them as delivery tools in biological or therapeutic applications.

Spin Effect to Regulate the Electronic Structure of Ir─Fe Aerogels for Efficient Acidic Water Oxidation.

"Spin" has been recently reported as an important degree of electronic freedom to promote catalysis, yet how it influences electronic structure remains unexplored. This work reports the spin-induced orbital hybridization in Ir─Fe bimetallic aerogels, where the electronic structure of Ir sites is effectively regulated by tuning the spin property of Fe atoms. The spin-optimized electronic structure boosts oxygen evolution reaction (OER) electrocatalysis in acidic media, resulting in a largely improved catalytic performance with an overpotential of as low as 236 mV at 10 mA cm-2. Furthermore, the gelation kinetics for the aerogel synthesis is improved by an order of magnitude based on the introduction of a magnetic field. Density functional theory calculation reveals that the increased magnetic moment of Fe (3d orbital) changes the d-band structure (i.e., the d-band center and bandwidth) of Ir (5d orbital) via orbital hybridization, resulting in optimized binding of reaction intermediates. This strategy builds the bridge between the electron spin theory with the d-band theory and provides a new way for the design of high-performance electrocatalysts by using spin-induced orbital interaction.

Strain Effects in Ru-Au Bimetallic Aerogels Boost Electrocatalytic Hydrogen Evolution.

To improve the sluggish kinetics of the hydrogen evolution reaction (HER), a key component in water-splitting applications, there is an urgent desire to develop efficient, cost-effective, and stable electrocatalysts. Strain engineering is proving an efficient strategy for increasing the catalytic activity of electrocatalysts. This work presents the development of Ru-Au bimetallic aerogels by a simple one-step in situ reduction-gelation approach, which exhibits strain effects and electron transfer to create a remarkable HER activity and stability in an alkaline environment. The surface strain induced by the bimetallic segregated structure shifts the d-band center downward, enhancing catalysis by balancing the processes of water dissociation, OH* adsorption, and H* adsorption. Specifically, the optimized catalyst shows low overpotentials of only 24.1 mV at a current density of 10 mA cm-2 in alkaline electrolytes, surpassing commercial Pt/C. This study can contribute to the understanding of strain engineering in bimetallic electrocatalysts for HER at the atomic scale.

Boosting Photocatalytic CO2 Methanation through Interface Fusion over CdS Quantum Dot Aerogels.

In the field of photocatalytic CO2 reduction, quantum dot (QD) assemblies have emerged as promising candidate photocatalysts due to their superior light absorption and better substrate adsorption. However, the poor contacts within QD assemblies lead to low interfacial charge transfer efficiency, making QD assemblies suffer from unsatisfactory photocatalytic performance. Herein, a novel approach is presented involving the construction of strongly interfacial fused CdS QD assemblies (CdS QD gel) for CO2 reduction. The novel CdS QD gel demonstrates outstanding photocatalytic performance for CO2 methanation, achieving a CH4 generation rate of ≈296 µmol g-1 h-1, with a selectivity surpassing 76% and an apparent quantum yield (AQY) of 1.4%. Further investigations reveal that the robust interfacial fusion in these CdS QDs not only boosts their ability to absorb visible light but also significantly promotes charge separation. The present work paves the way for utilizing QD gel photocatalysts in realizing efficient CO2 reduction and highlights the critical role of interfacial engineering in photocatalysts.

Molecularly imprinted polymer-coated hybrid optical waveguides for sub-aM fluorescence sensing.

The sensitivity of fluorescent sensors is crucial for their applications. In this study, we propose a molecularly imprinted polymer (MIP)-coated optical fibre-hybrid waveguide-fibre sensing structure for ultrasensitive fluorescence detection. In such a structure, the MIP coated-hybrid waveguide acts as a sensing probe, and the two co-axially connected optical fibres act as a highly efficient probing light launcher and a fluorescence signal collector, respectively. For the dual-layered waveguide sensing probe, the inner hybrid waveguide core was fabricated using a hollow quartz nanoparticle-hybridized polymer composite with a low refractive index, and the outer MIP coating layer possesses a high refractive index. Simulations showed that this dual-layer configuration can cause light propagation from the waveguide core to the MIP sensing layer with an efficiency of 98%, which is essential for detection. To validate this concept, we adopted a popular fluorescent dye, rhodamine B, to evaluate the sensing characteristics of the proposed system. We achieved an extremely low limit of detection of approximately 1.3 × 10-19 g ml-1 (approximately 0.27 aM).

Dual-band terahertz chiral metasurface absorber with enhanced circular dichroism based on temperature-tunable InSb for sensing applications.

Circular dichroism (CD) in terahertz (THz) regions has been widely used in biomonitoring, analytical chemistry, communication sensing, and other fields. Herein, we present a simple design for a dual-band THz chiral metasurface absorber (CMA) with a stronger CD effect based on temperature-tunable InSb for enhanced sensing applications. The proposed dual-band CMA consisted of a periodic array of the evolved C-shaped InSb adhered to a copper substrate. The designed CMA at 305 K achieved a right-handed circular polarization (RCP)-selective absorbance of 98.86% and 97.43% at 1.65 THz and 1.89 THz, respectively, and left-handed circular polarization (LCP) absorbance of 9.98% and 22.46%, respectively, and exhibited stronger CD values of 0.89 and 0.75. In addition, the CD properties of the designed CMA can be adjusted by changing the geometrical parameters of the unit-cell structure. The simulated electric field and power follow distributions indicate that this dual-band chiral-selective absorption of the designed CMA is due to the different plasma resonance mode excitations for the incident circular polarization (CP) wave. In addition, the CD properties of the designed CMA can be adjusted by changing the geometrical parameters of the unit-cell structure. Furthermore, CD spectra can be dynamically adjusted by varying the outside temperature and refraction index (RI) of the filled analytes. The designed dual-band CMA can function as a high-performance temperature sensor with sensitivities of 4.68 GHz K-1 and 5.52 GHz K-1 and also as an RI sensor with sensitivities of 1080 GHz RIU-1 and 860 GHz RIU-1, respectively. Our proposed tunable dual-band CMA with its exquisite performance has the potential to be widely applied in diverse areas such as detection, sensing, and other related optoelectronic fields.

Beyond conventional bounds: Surpassing system limits for stereotactic ablative (SAbR) lung radiotherapy using CBCT-based adaptive planning system.

PURPOSE: Online adaptive radiotherapy relies on a high degree of automation to enable rapid planning procedures. The Varian Ethos intelligent optimization engine (IOE) was originally designed for conventional treatments so it is crucial to provide clear guidance for lung SAbR plans. This study investigates using the Ethos IOE together with adaptive-specific optimization tuning structures we designed and templated within Ethos to mitigate inter-planner variability in meeting RTOG metrics for both online-adaptive and offline SAbR plans. METHODS: We developed a planning strategy to automate the generation of tuning structures and optimization. This was validated by retrospective analysis of 35 lung SAbR cases (total 105 fractions) treated on Ethos. The effectiveness of our planning strategy was evaluated by comparing plan quality with-and-without auto-generated tuning structures. Internal target volume (ITV) contour was compared between that drawn from CT simulation and from cone-beam CT (CBCT) at time of treatment to verify CBCT image quality and treatment effectiveness. Planning strategy robustness for lung SAbR was quantified by frequency of plans meeting reference plan RTOG constraints. RESULTS: Our planning strategy creates a gradient within the ITV with maximum dose in the core and improves intermediate dose conformality on average by 2%. ITV size showed no significant difference between those contoured from CT simulation and first fraction, and also trended towards decreasing over course of treatment. Compared to non-adaptive plans, adaptive plans better meet reference plan goals (37% vs. 100% PTV coverage compliance, for scheduled and adapted plans) while improving plan quality (improved GI (gradient index) by 3.8%, CI (conformity index) by 1.7%). CONCLUSION: We developed a robust and readily shareable planning strategy for the treatment of adaptive lung SAbR on the Ethos system. We validated that automatic online plan re-optimization along with the formulated adaptive tuning structures can ensure consistent plan quality. With the proposed planning strategy, highly ablative treatments are feasible on Ethos.

Aptamer-functionalized gold nanoparticles for mercury ion detection in a colorimetric assay based on color change time as signal readout.

A universal strategy for a rapid colorimetric method for Hg2+ in an aqueous solution is described. The specific binding of Hg2+ (thymine-Hg2+-thymine) with thiolated DNA-functionalized gold nanoparticles (AuNPs) via Au-S bonds increases the spatial hindrance of the AuNP surface, resulting in a weakened catalytic ability of AuNPs to catalyze the reaction between p-nitrophenol and NaBH4. Therefore, the color change time (CCT) of the solution from yellow to colorless becomes longer. Based on the kinetic curve of absorbance over time measured by a UV spectrometer, the level of Hg2+ in aqueous solutions can be easily quantified. A linear relationship between CCT and Hg2+ concentration was obtained in the 10-600-nM range with a detection limit of 0.20 nM, which is much lower than the limit value (10 nM) defined by the US Environmental Protection Agency for Hg2+ in drinking water. The excellent sensitivity comes from CCT as the signal output of the probe, rather than the absorbance or wavelength change used in traditional colorimetric probes as the signal output.

Mental health and jaw function of patients with anterior disc displacement with reduction.

BACKGROUND: The mental health of patients with temporomandibular disorder or other jaw dysfunction is a primary concern in clinical practice, but the extent of these symptoms in this patient subset is not yet well understood. OBJECTIVES: This cross-sectional study aimed to compare the mental health and jaw function between patients with anterior disc displacement with reduction (ADDWR) and healthy individuals. METHODS: In total, 170 patients with ADDWR and 163 healthy participants enrolled in this study from March 2020 to December 2021. All participants completed a single assessment, including a pain rating and several questionnaires to assess jaw dysfunction, depression, and anxiety. All scores and the grade distribution of somatization, depression and anxiety were analysed between groups. RESULTS: Significant differences were found in measures of pain, jaw function and somatization; the ADDWR group had significantly higher pain and functional jaw limitations than the healthy group. The grade distribution of somatic symptoms also differed between groups: the distribution of patients who reported mild and above scores in the ADDWR group was significantly higher than that of the healthy group. Depression and anxiety scores or grade distributions were not significantly different by group. CONCLUSION: The jaw function of patients seeking treatment for ADDWR was lower than that of non-TMD individuals. They did not show high anxiety and depression symptoms, but their somatic symptoms were more apparent.

Promoted Charge Separation and Long-Lived Charge-Separated State in Porphyrin-Viologen Dyad Nanoparticles.

Developing light-harvesting systems with efficient photoinduced charge separation and long-lived charge-separated (CS) state is desirable but still challenging. In this study, we designed a zinc porphyrin photosensitizer covalently linked with viologen (ZnP-V) that can be prepared into nanoparticles in aqueous solution. In DMF solution, the monomeric ZnP-V dyads show no electron transfer between the ZnP and viologen units. In contrast, the ZnP-V nanoparticles in aqueous solution show fast charge separation with a CS state lifetime of up to 4.3 ms. This can be attributed to charge hopping induced by aggregation or distance modification between the donor and acceptor induced by electronic interaction. Nevertheless, the lifetime of the CS state is orders of magnitude longer than for molecular aggregates reported previously. The ZnP-V nanoparticles show enhanced photocatalytic hydrogen production as compared to the ZnP nanoparticles and still hold promise for other applications such as photovoltaic devices and photoredox catalysis.

Lateral Electron and Hole Hopping between Dyes on Mesoporous ZrO2: Unexpected Influence of Solvents with a Low Dielectric Constant.

Lateral intermolecular charge transfer between photosensitizers on metal oxide substrates is important for the understanding on the overall working principles of dye-sensitized systems. Such studies usually concentrate on either hole or electron transfer separately and are conducted in solvents with a high dielectric constant (εs) that are known, however, to show a drastic decrease of the local dielectric constant close to the metal oxide surface. In the present study, both hole and electron hopping between organic donor-acceptor photosensitizers was experimentally investigated on PB6 dye-sensitized mesoporous ZrO2 films. The donor (close to the surface) and acceptor (away from surface) subunit of the PB6 dye were observed to be involved in hole and electron hopping, respectively. Hole and electron transfer kinetics were found to differ remarkably in high-εs solvents, but similar in solvents with εs < 12. This finding indicates that low-εs solvents maintain similar local dielectric constant values close to, and further away from, the semiconductor surface, which is different from the previously observed behavior of high dielectric constant solvents at a metal oxide interface.

Unbiased multitissue transcriptomic analysis reveals complex neuroendocrine regulatory networks mediated by spinal cord injury-induced immunodeficiency.

BACKGROUND: Spinal cord injury (SCI), which causes loss of sensory and motor function in the body below the level of injury, is a devastating disease of the central nervous system. SCI leads to severe secondary immunosuppression, called SCI-induced immunodeficiency syndrome (SCI-IDS), which is characterized by increased susceptibility to infection and further exacerbates neurological dysfunction. Several studies have suggested that SCI-IDS is an independent risk factor for poor neurological prognosis. SCI-IDS predominantly occurs following injury above the T5 levels and eventually leads to systemic immune failure, possibly via the sympathetic-adrenal medullary axis and the hypothalamic‒pituitary‒adrenal (HPA) axis. However, the mechanism remains unclear. METHODS AND OBJECTIVES: The concentrations of adrenocorticotropic hormone and cortisol in plasma, as well as changes in sympathetic activity (blood pressure and catecholamine levels in plasma), were assessed in rats in the high-level (T3) spinal cord injury (T3-SCI) group and the low-level (T10) spinal cord injury (T10-SCI) group. Second, the differential regulation of the gene network between the sympathetic-adrenal medullary axis and the HPA axis was explored by histology and multitissue transcriptomics, and the neuroendocrine-immune network associated with SCI-IDS was further elucidated. RESULTS: The spleen and thymus gland, which are secondary immune organs, were significantly atrophied in rats in the T3-SCI group, and the white pulp of the spleen was significantly atrophied. The level of cortisol, which is mediated by the adrenal glands, was markedly elevated, but norepinephrine levels were markedly decreased. There was no difference in adrenocorticotropic hormone expression between any of the groups. The transcriptome analysis results showed that the downregulated differentially expressed genes (DEGs) in the T3-SCI group were enriched in the GO term immunoregulation, indicating that splenic immune function was markedly impaired after high-level SCI. The upregulated DEGs in the hypothalamus (hub genes: Nod2, Serpine1, Cebpb, Nfkbil1, Ripk2, Zfp36, Traf6, Akap8, Gfer, Cxcl10, Tnfaip3, Icam1, Fcgr2b, Ager, Dusp10, and Mapkapk2) were significantly enriched in inflammatory pathways, and the downregulated genes (hub genes: Grm4, Nmu, P2ry12, rt1-bb1, Oprm1, Zfhx2, Gpr83, and Chrm2) were enriched in pathways related to inhibitory Gi-mediated G protein-coupled receptor (Gi-GPCR) neurons and neuropeptide changes. The upregulated genes in the adrenal glands (hub genes: Ciart, per2, per3, cry1, and cry2) were enriched in cortisol secretion and circadian rhythm changes, and the downregulated genes (hub genes: IL7r, rt1-bb, rt1-bb1, rt1-da, rt1-ba, cd74, cxcr3, vcam1, ccl5, bin1, and IL8) were significantly enriched in MHC-mediated immune responses. CONCLUSIONS: To explore the possible mechanism underlying SCI-IDS, this study assessed the differential regulation of the gene network associated with neuroendocrine immunity after SCI. Progressive neuroinflammation spreads after injury, and neurotransmission through Gi-mediated G protein-coupled receptors in the HPA axis and neuropeptide production by the hypothalamus are inhibited. Disruption of the connection between the hypothalamus and the adrenal glands causes autonomous regulation of the adrenal glands, disturbance of circadian rhythm and finally hypercortisolemia, leading to general suppression of peripheral adaptive immunity. Neuraxial nerve inflammation caused by SCI persists indefinitely, blocking nerve repair; persistent system-wide immunosuppression in the periphery results in increased susceptibility to infection, leading to poor neurological prognosis.

Bimetallic Pt-Hg Aerogels for Electrocatalytic Upgrading of Ethanol to Acetate.

Electrochemical upgrading of ethanol to acetic acid provides a promising strategy to couple with the current hydrogen production from water electrolysis. This work reports the design of a series of bimetallic PtHg aerogels, where the PtHg aerogel exhibits a 10.5-times higher mass activity than that of commercial Pt/C toward ethanol oxidation. More impressively, the PtHg aerogel demonstrates nearly 100% selectivity toward the production of acetic acid. The operando infrared spectroscopic studies and nuclear magnetic resonance analysis verify the preferable C2 pathway mechanism during the reaction. This work opens an avenue for the electrochemical synthesis of acetic acid via ethanol electrolysis.

A Bioinspired Atomically Thin Nanodot Supported Single-Atom Nanozyme for Antibacterial Textile Coating.

Surface antibacterial coatings with outstanding antibacterial efficiency have attracted increasing attention in medical protective clothing and cotton surgical clothing. Although nanozymes, as a new generation of antibiotics, are used to combat bacteria, their catalytic performance remains far from satisfactory as alternatives to natural enzymes. Single-atom nanodots provide a solution to the low catalytic activity bottleneck of nanozymes. Here, atomically thin C3 N4 nanodots supported single Cu atom nanozymes (Cu-CNNDs) are developed by a self-tailoring approach, which exhibits catalytic efficiency of 8.09 × 105 M-1 s-1 , similar to that of natural enzyme. Experimental and theoretical calculations show that excellent peroxidase-like activity stems from the size effect of carrier optimizing the coordination structure, leading to full exposure of Cu-N3 active site, which improves the ability of H2 O2 to generate hydroxyl radicals (•OH). Notably, Cu-CNNDs exhibit over 99% superior antibacterial efficacy and are successfully grafted onto cotton fabrics. Thus, Cu-CNNDs blaze an avenue for exquisite biomimetic nanozyme design and have great potential applications in antibacterial textiles.

Tunable metal hydroxide-organic frameworks for catalysing oxygen evolution.

The oxygen evolution reaction is central to making chemicals and energy carriers using electrons. Combining the great tunability of enzymatic systems with known oxide-based catalysts can create breakthrough opportunities to achieve both high activity and stability. Here we report a series of metal hydroxide-organic frameworks (MHOFs) synthesized by transforming layered hydroxides into two-dimensional sheets crosslinked using aromatic carboxylate linkers. MHOFs act as a tunable catalytic platform for the oxygen evolution reaction, where the π-π interactions between adjacent stacked linkers dictate stability, while the nature of transition metals in the hydroxides modulates catalytic activity. Substituting Ni-based MHOFs with acidic cations or electron-withdrawing linkers enhances oxygen evolution reaction activity by over three orders of magnitude per metal site, with Fe substitution achieving a mass activity of 80 A [Formula: see text] at 0.3 V overpotential for 20 h. Density functional theory calculations correlate the enhanced oxygen evolution reaction activity with the MHOF-based modulation of Ni redox and the optimized binding of oxygenated intermediates.

L-shaped association between serum 25-hydroxyvitamin D and all-cause mortality of individuals with rheumatoid arthritis.

OBJECTIVE: We aimed to examine the relationship between serum 25-hydroxyvitamin D and all-cause, cause-specific mortality of patients with RA. METHODS: This cohort study included 1466 patients with RA from The National Health and Nutrition Examination Survey (NHANES) 2001-14. Mortality status was obtained according to death certificate records from the National Death Index. Cox proportional risk models were used to estimate hazard ratios (HR) and 95% CI for mortality. A generalized additive model, smooth curve fitting and 2-piecewise Cox proportional hazards models were established to address the nonlinearity between serum 25-hydroxyvitamin D and mortality. RESULTS: A total of 1466 patients [mean (s.d.) 59.89 (14.14) years old; 58.94% female] were enrolled. The weighted mean level of 25-hydroxyvitamin D was 59.26 (24.99) nmol/l and 38.95% were found with deficient (or severe deficient) vitamin D (<50.00 nmol/l). During 10453 person-years of follow-up, 268 patients were documented for all-cause death, including 52 cardiovascular disease （CVD）deaths and 48 cancer deaths. Compared with patients with serum 25-hydroxyvitamin D <25.00 nmol/l, patients with higher serum 25-hydroxyvitamin D were more likely to have lower rate of all-cause mortality. Nonlinear and L-shaped association between serum 25-hydroxyvitamin D and all-cause mortality was found, and decreased serum 25-hydroxyvitamin D was significantly associated with increased risk of all-cause mortality in patients with serum 25-hydroxyvitamin D <37.30 nmol/l [HR 0.95 (0.92, 0.98); P < 0.01]. CONCLUSION: An L-shaped association between serum 25-hydroxyvitamin D and all-cause mortality was found among patients with RA, indicating that serum 25-hydroxyvitamin D should be improved to a certain level for the prevention of premature death.

Prognosis of Concurrent Versus Sequential Chemo-Radiotherapy Induction Followed by Surgical Resection in Patients with Advanced Thymic Epithelial Tumors: A Retrospective Study.

BACKGROUND: This study aimed to evaluate the prognosis of concurrent chemo-radiotherapy (CCRT) versus sequential chemo-radiotherapy (SCRT) induction followed by surgical resection in patients with advanced thymic epithelial tumors (TETs). METHODS: This retrospective study included patients with advanced TETs who underwent CCRT or SCRT induction followed by surgical resection at the Second General Hospital of Guangdong Province between January 2008 and December 2019. The primary outcomes were induction response rate and surgical complete resection rate. The secondary outcomes were surgery combined resection, post-induction T staging, postoperative TNM staging, postoperative pathological tumor regression grade, progression-free survival (PFS) and overall survival (OS), and adverse events (AEs). RESULTS: A total of 31 patients were included, 15 of whom received CCRT and the other 16 SCRT. The induction response rates were 80.0 and 62.5%, respectively, the post-induction step-down rates were 46.7 and 31.3%, respectively, and the post-induction R0 resection rates were 80.0 and 68.8%, respectively, without significant differences between CCRT and SCRT groups (all P > 0.05). The 5-year OS rate was 64.2 and 51.6%, respectively, and PFS was 42.3 and 21.4%, respectively, without significant differences between CCRT and SCRT groups (both P > 0.05). AEs in the hematologic system were significantly higher with CCRT compared with SCRT (P = 0.009). CONCLUSIONS: Patients with advanced TETs might have a good prognosis with both CCRT and SCRT induction therapy, while SCRT induction may result in a lower probability of AEs in the hematologic system.

Activated AMPK Protects Against Chronic Cerebral Ischemia in Bilateral Carotid Artery Stenosis Mice.

AMP-activated protein kinase (AMPK) is a regulator of cellular energy metabolism. Long-term use of metformin, an AMPK activator, was previously reported to be neuroprotective, as it promotes behavioral improvement and angiogenesis following an acute ischemic injury of the brain. However, only a few studies have demonstrated the role of AMPK in alleviating chronic cerebral ischemia (CCI) in mice models in the long-term (over 3 months). Therefore, we established a mouse model of CCI via bilateral carotid artery stenosis (BCAS) to explore the effect of AMPK on CCI. We used four groups of 3-month-old male C57BL/6 mice labeled as Sham, BCAS, BCAS + metformin treatment (BCAS + Met) and BCAS + AMPKα2 gene knockout (BCAS + KO). Three months after BCAS, we measured the AMPK protein expression, spatial learning and memory, Nissl bodies, cell apoptosis, astrocyte activation, and oligodendrocyte maturation. Additionally, we observed the brain tissues for changes in cell morphology. We observed that mice in the BCAS group had impaired spatial learning and memory compared with those in the sham group. The brain tissues of mice with CCI injury showed altered cell morphology, fewer Nissl bodies, cerebral cells apoptosis, and astrocyte activation. Interestingly, compared with mice from the BCAS group, the brains of mice from BCAS + Met group suffered lesser damage, whereas those of mice from the BCAS + KO group suffered more damage. The activation of AMPK, especially AMPKα2, plays a neuroprotective role during CCI in a mouse model of BCAS.

Hierarchical Nanomaterials Assembled from Peptoids and Other Sequence-Defined Synthetic Polymers.

In nature, the self-assembly of sequence-specific biopolymers into hierarchical structures plays an essential role in the construction of functional biomaterials. To develop synthetic materials that can mimic and surpass the function of these natural counterparts, various sequence-defined bio- and biomimetic polymers have been developed and exploited as building blocks for hierarchical self-assembly. This review summarizes the recent advances in the molecular self-assembly of hierarchical nanomaterials based on peptoids (or poly-N-substituted glycines) and other sequence-defined synthetic polymers. Modern techniques to monitor the assembly mechanisms and characterize the physicochemical properties of these self-assembly systems are highlighted. In addition, discussions about their potential applications in biomedical sciences and renewable energy are also included. This review aims to highlight essential features of sequence-defined synthetic polymers (e.g., high stability and protein-like high-information content) and how these unique features enable the construction of robust biomimetic functional materials with high programmability and predictability, with an emphasis on peptoids and their self-assembled nanomaterials.

Asymmetric supercapacitors based on SnNiCoS ternary metal sulfide electrodes.

While metal sulfides have extensively investigated as electrode materials for supercapacitors, the further optimization of their material system is still necessary to achieve satisfied performance. In this work, we reported the synthesis of ternary metal sulfide SnNiCoS and its application as electrode material of asymmetric supercapacitors, in which active carbon is used as the other electrode. For control experiments, asymmetric supercapacitors based on single metal sulfide CoS and binary metal sulfide NiCoS are also fabricated and investigated. The results show that the nanospherical SnNiCoS achieves the best performance. Ternary sulphide materials offer more redox than corresponding single-metal sulphides due to the synergy among various transition metal elements. The specific capacitance is 18.6 F cm-2at current density of 5 mA·cm-2. An energy density of 937.2µWh cm-2is achieved at a power density of 4000µW·cm-2. After 8000 cycles, the capacity retention rate is 82.9%. Present work indicates that SnNiCoS ternary metal sulfide could be a promising composite for high performance supercapacitors.