Tuning the Topology of Two-Dimensional Covalent Organic Frameworks through Site-Selective Synthetic Strategy.

Tuning the topology of two-dimensional (2D) covalent organic frameworks (COFs) is of paramount scientific interest but remains largely unexplored. Herein, we present a site-selective synthetic strategy that enables the tuning of 2D COF topology by simply adjusting the molar ratio of an amine-functionalized dihydrazide monomer (NH2 -Ah) and 4,4',4''-(1,3,5-triazine-2,4,6-triyl)tribenzaldehyde (Tz). This approach resulted in the formation of two distinct COFs: a clover-like 2D COF with free amine groups (NH2 -Ah-Tz) and a honeycomb-like COF without amine groups (Ah-Tz). Both COFs exhibited good crystallinity and moderate porosity. Remarkably, the clover-shaped NH2 -Ah-Tz COF, with abundant free amine groups, displayed significantly enhanced adsorption capacities toward crystal violet (CV, 261 mg/g) and congo red (CR, 1560 mg/g) compared to the non-functionalized honeycomb-like Ah-Tz COF (123 mg/g for CV and 1340 mg/g for CR), underscoring the pivotal role of free amine functional groups in enhancing adsorption capacities for organic dyes. This work highlights that the site-selective synthetic strategy paves a new avenue for manipulating 2D COF topology by adjusting the monomer feeding ratio, thereby modulating their adsorption performances toward organic dyes.

Iodine Adsorption-Desorption-Induced Structural Transformation and Improved Ag+ Turn-On Luminescent Sensing Performance of a Nonporous Eu(III) Metal-Organic Framework.

Posttreatment of pristine metal-organic frameworks (MOFs) with suitable vapor may be an effective way to regulate their structures and properties but has been less explored. Herein, we report an interesting example in which a crystalline nonporous Eu(III)-MOF was transferred to a porous amorphous MOF (aMOF) via iodine vapor adsorption-desorption posttreatment, and the resulting aMOF showed improved turn-on sensing properties with respect to Ag+ ions. The crystalline Eu-MOF, namely, Eu-IPDA, was assembled from Eu(III) and 4,4'-{4-[4-(1H-imidazol-1-yl)phenyl]pyridine-2,6-diyl}dibenzoic acid (H2IPDA) and exhibited a two-dimensional (2D) coordination network based on one-dimensional secondary building blocks. The close packing of the 2D networks gives rise to a three-dimensional supramolecular framework without any significant pores. Interestingly, the nonporous Eu-IPDA could absorb iodine molecules when Eu-IPDA crystals were placed in iodine vapor at 85 °C, and the adsorption capacity was 1.90 g/g, which is comparable to those of many MOFs with large BET surfaces. The adsorption of iodine is attributed to the strong interactions among the iodine molecule, the carboxy group, and the N-containing group and leads to the amorphization of the framework. After immersion of the iodine-loaded Eu-IPDA in EtOH, approximately 89.7% of the iodine was removed, resulting in a porous amorphous MOF, denoted as a-Eu-IPDA. In addition, the remaining iodine in the a-Eu-IPDA framework causes strong luminescent quenching in the fluorescence emission region of the Eu(III) center when compared with that in Eu-IPDA. The luminescence intensity of a-Eu-IPDA in water suspensions was significantly enhanced when Ag+ ions were added, with a detection limit of 4.76 × 10-6 M, which is 1000 times that of pristine Eu-IPDA. It also showed strong anti-interference ability over many common competitive metal ions and has the potential to sense Ag+ in natural water bodies and traditional Chinese medicine preparations. A mechanistic study showed that the interactions between Ag+ and the absorbed iodine, the carboxylate group, and the N atoms all contribute to the sensing performance of a-Eu-IPDA.

Self-Standing Chiral Covalent Organic Framework Thin Films with Full-Color Tunable Guest-Induced Circularly Polarized Luminescence.

Exploring self-standing chiral covalent organic framework (CCOF) thin films with controllable circularly polarized luminescence (CPL) is of paramount significance but remains challenging. Herein, we demonstrate the first example of self-standing CCOF films employing a polymerization-dispersion-filtration strategy. Pristine, low-quality CCOF films were produced by interfacial polymerization and then re-dispersed into COF colloidal solutions. Via vacuum assisted assembly, these COF colloids were densely stacked and assembled into self-standing, pure chiral COF films (L-/D-CCOF-F) that were transparent, smooth, crack-free and highly crystalline. These films were tunable in thicknesses, areas, and roughness, along with strong diffuse reflectance circular dichroism (DRCD) and cyan CPL signals, showing an intrinsic luminescence asymmetric factor (glum) of 4.3×10-3. Furthermore, these COF films served as host adsorbents to load various achiral organic dye guests through adsorption. The effective chiral transfer and energy transfer between CCOF-F and achiral fluorescent dyes endowed the dyes with strong chirality and tunable DRCD, resulting in intense, full-color-tunable solid-state CPL. Notably, the ordered arrangement of dye guest molecules within the preferentially oriented chiral pores of CCOF-F contributed to an amplified |glum| factor of 7.2×10-2, which is state-of-the-art for COF-based CPL materials. This work provides new insights into the design and fabrication of self-standing chiral COF films.

Self-Assembly of Helical Nanofibrous Chiral Covalent Organic Frameworks.

Despite significant progress on the design and synthesis of covalent organic frameworks (COFs), precise control over microstructures of such materials remains challenging. Herein, two chiral COFs with well-defined one-handed double-helical nanofibrous morphologies were constructed via an unprecedented template-free method, capitalizing on the diastereoselective formation of aminal linkages. Detailed time-dependent experiments reveal the spontaneous transformation of initial rod-like aggregates into the double-helical microstructures. We have further demonstrated that the helical chirality and circular dichroism signal can be facilely inversed by simply adjusting the amount of acetic acid during synthesis. Moreover, by transferring chirality to achiral fluorescent molecular adsorbents, the helical COF nanostructures can effectively induce circularly polarized luminescence with the highest luminescent asymmetric factor (glum ) up to ≈0.01.

Regulating the Porosity and Iodine Adsorption Properties of Metal-Organic Framework Glass via an Ammonia-Immersion Approach.

Metal-organic framework (MOF) glass is a new type of glass material, but it usually lacks sufficient porosity. Thus, regulating the pore structure of MOF glass to improve its adsorption performance is very important. Herein, we found that the porosity of MOF glasses agZIF-62 and agZIF-76 can be regulated via an ammonia-immersion approach. After ammonia immersion, the resulting agZIF-62-NH3 and agZIF-76-NH3 could be maintained in their glass states or converted to their amorphous states, respectively. Their porosity changed according to the gas adsorption experiments. Notably, compared with agZIF-62 and agZIF-76, the iodine uptake capacities for agZIF-62-NH3 and agZIF-76NH3 increased by 12 and 21 times, respectively. This work shows that the subsequent treatment of MOF glass can regulate their adsorption performance.

Homochiral Cu(I) Coordination Polymers Based on a Double-Stranded Helical Building Block from Achiral Ligands: Symmetry-Breaking Crystallization, Photophysical and Photocatalytic Properties.

A pair of homochiral coordination polymers, [Cu(DPT)]n (1M and 1P, HDPT = 3,5-di-4-pyridinyl-2H-tetrazole), were assembled from achiral precursors. Crystal structure analysis showed that they are chiral three-dimensional (3D) coordination polymers based on a new double-stranded helical building block that is composed of two different 1D helices. Interestingly, rare symmetry-breaking crystallization was observed, in which the possibility of obtaining enantio-enriched bulk product with excessive M enantiomers (1-A) was obviously higher than that for P enantiomers (1-B) as demonstrated in multiple, repeated experiments with single-crystal diffraction and vibrational circular dichroism (VCD) spectra. Moreover, compound [Cu(DPT)]n shows good chemical stability in water, with pH values ranging from 3 to 13, as well as in many common organic solvents. Photophysical properties, including thermochromic properties and two-photon excited luminescence, were studied, and the potential for applications in temperature sensing was exhibited. In addition, the photocatalytic degradation of methylene blue in water indicated that compound [Cu(DPT)]n can be used as a photocatalyst.

Hydrolytically Stable Nanotubular Cationic Metal-Organic Framework for Rapid and Efficient Removal of Toxic Oxo-Anions and Dyes from Water.

Cationic framework materials capable of removing anionic pollutants from wastewater are highly desirable but relatively rarely reported. Herein, a cationic MOF (SCNU-Z1-Cl) possessing tubular channels with diameter of 1.5 nm based on Ni(II) and a nitrogen-containing ligand has been synthesized and applied to capture hazardous anionic contaminants from water. The SCNU-Z1-Cl exhibits high BET surface area of 1636 m2/g, and shows high hydrolytically stability in pH range from 4 to 10. Owing to the large tubular channels and the uncoordinated anions in the framework, the aqueous-phase anion-exchange applications of SCNU-Z1-Cl were explored with environmentally toxic oxo-anions including CrO42-, Cr2O72-, MnO4-, and ReO4-, and organic dyes. The adsorption of oxoanions exhibits high uptake kinetics and the adsorption capacities of CrO42-, Cr2O72-, MnO4-, and ReO4- are 126, 241, 292, and 318 mg/g, respectively, which were some of the highest values in the field of MOF/COF. In additional, the selectively is high when other concurrent anions are exist. The anionic dyes with different sizes including methyl orange, acid orange A, congo red, as well as methyl blue can be adsorbed by SCNU-Z1-Cl in few minutes to about 1 h. The adsorption capacities for them are 285, 180, 585, and 262 mg/g, respectively. In contrast, the adsorption kinetics for catinionic dyes with different sizes is obviously lower and exhibit a size-selectively adsorption that only cationic dye with suitable size (rhodamine B) can be adsorbed by SCNU-Z1-Cl. Consequently, SCNU-Z1-Cl can sepearate organic dyes in three different modes: size-dependent, charge-dependent, and kinetics-dependent selective adsorption. The excellent adsorption and separation properties of SCNU-Z1-Cl is attribute to the cationic framework, large tubular channel, as well as the high positive Zeta potential.

An Anionic Nanotubular Metal-Organic Framework for High-Capacity Dye Adsorption and Dye Degradation in Darkness.

A metal-organic framework (MOF), named SCNU-Z2, based on a new heterotopic tripodal nitrogen-containing ligand, has been constructed. Due to the replacement of one imidazole group in the reported ligand with one tetrazole group, the charge of the framework is changed from cationic to anionic but retains the same framework structure. The framework consists of tubular channels with a diameter of 1.5 nm and exhibits satisfactory stability in water with a pH range of 3-11. The anionic nature of the framework allows the effective adsorption of the cationic dyes MLB, CV, and RhB with capacities of 455.6, 847.4, and 751.8 mg/g, respectively. Among them, the adsorption capacities for SCNU-Z2 on CV and RhB rank as the highest when compared with other reported MOFs. In contrast, SCNU-Z2 exhibits an extremely low capacity for anionic dyes MO and AO, making it useful for the separation of anionic and cationic dyes based on a charge-dependent mode. Interestingly, SCNU-Z2 can be used to degrade an anionic dye, MB, within 30 min under darkness at room temperature. The apparent activation energy of the dye degradation reaction is calculated to be approximately 18.96 kJ·mol-1, implying that the catalytic reaction of MB can be considered as a low-temperature thermocatalytic reaction in the dark/SCNU-Z2 system.

Clinicopathological characteristics of unicentric retroperitoneal Castleman's disease: a study of 14 cases.

BACKGROUND: The objectives of this study are to investigate the clinicopathological characteristics and prognosis analysis of unicentric retroperitoneal Castleman's disease (CD), and to improve the level of diagnosis and treatment of unicentric retroperitoneal CD. METHODS: The clinical data of 14 patients with unicentric retroperitoneal CD undergoing surgery from September 2007 to March 2014 were retrospectively reviewed. RESULTS: There were six males and eight females with a median age of 39 years old (range 15-58). Only three patients had a clinical manifestation of abdominal pain, and one patient associated with myasthenia gravis. All patients underwent surgical resection. The mean operation time was 137 min with a range of 72-472 min. The mean blood loss was 143 ml (range 50-500 ml). The CD was confirmed by histopathology. There were hyaline vascular (HV) type of CD in 13 cases, and mixed type of CD in one case. The mean hospital stay was 17.9 days with a mean postoperation hospital stay of 9.2 days. The duration of follow-up ranged from 21 to 99 months for 14 cases. All the 14 patients were alive without recurrence. CONCLUSIONS: Unicentric retroperitoneal CD is a rare disease that is often misdiagnosed due to the absence of specific clinical manifestations. The final diagnosis depends on pathologic examination. Complete surgical resection of the tumor is the best therapeutic alternative for unicentric CD.

[Diagnosis and treatment of prostatic malignant mesenchymal tumors: Analysis of 20 cases].

OBJECTIVE: To explore the diagnosis, treatment, and prognosis of prostatic malignant mesenchymal tumors (PMMT). METHODS: We retrospectively analyzed the clinical and follow-up data about 20 cases of PMMT and reviewed the literature relevant to the diagnosis, treatment, and prognosis of the disease. RESULTS: Based on the results of pathology and immunohistochemistry, the 20 PMMT cases included leiomyosarcoma (n = 7), rhabdomyosarcoma (n = 5), prostatic stromal sarcoma (n = 3), chondrosarcoma (n = 1), and undifferentiated PMMT (n = 4). Twelve of the patients were treated by radical prostatectomy (3 concurrently by sigmoid colostomy and 1 by cystostomy), 2 by pelvic tumor resection following arterial embolization, 1 by total pelvic exenteration, 1 by colostomy with pelvic lymph node biopsy, and 4 by conservative therapy because of metastasis to the lung, pelvis and bone. Of the 20 patients, 9 died of systemic metastasis within 3 months after treatment, 3 died at 6, 7, and 14 months, respectively, 3 survived with tumor for 5, 11, and 12 months, respectively, 2 survived without tumor for 12 and 24 months so far, all subjected to periodic chemotherapy postoperatively, and 3 lost to follow-up. CONCLUSION: PMMT is a tumor of high malignancy and rapid progression, for which transrectal ultrasound-guided biopsy remains the main diagnostic method. The clinical stage of the tumor is an important factor influencing its prognosis and the survival rate of the patients can be improved by early diagnosis and combined therapy dominated by radical prostatectomy.

A case report of retroperitoneal pararenal Castleman's disease associated with myasthenia gravis.

BACKGROUND: Castleman's disease (CD) is a relatively rare disorder characterized by the benign proliferation of lymphoid tissue. The combination of an occurrence of retroperitoneal pararenal CD with myasthenia gravis (MG) is extremely rare. CASE PRESENTATION: The patient was admitted to our hospital for investigation of a retroperitoneal pararenal tumor which had been coincidentally diagnosed at a local hospital where he was admitted because of MG. The patient subsequently underwent an exploratory laparotomy and suffered from postoperative myasthenic crisis. Pathological examination revealed a left retroperitoneal mass of CD (hyaline vascular type). There was no recurrence of disease found after 7 months. CONCLUSIONS: CD with MG is a rare condition. Postoperative myasthenic crisis is a severe complication. The possibility of its occurrence must be in physicians' minds and the risk of postoperative myasthenic crisis must be carefully considered when evaluating MG patients undergoing surgery.

Construction of binary metal-organic cage-based materials via a "covalently linked plus cage encapsulated" strategy.

A strategy for constructing binary metal-organic cage (MOC)-based materials was developed. The cationic MOCs were covalently linked by organic linkers to a cationic extended network, whereas the anionic MOCs acted as counterions and were encapsulated in the network. Compared with the corresponding unary materials, the binary MOC-based materials exhibited improved porosity and adsorption performance.

Construction of a Defective Chiral Covalent Organic Framework for Fluorescence Recognition of Amino Acids.

The design and synthesis of chiral covalent organic frameworks (COFs) with controlled defect sites are highly desirable but still remain largely unexplored. Herein, we report the synthesis of a defective chiral HD-TAPB-DMTP COF by modifying the chiral monomer helicid (HD) into the framework of an achiral imine-linked TAPB-DMTP COF using a chiral monomer exchange strategy. Upon the introduction of the chiral HD unit, the obtained defective chiral HD-TAPB-DMTP COF not only displays excellent crystallinity, large specific surface area (up to 2338 m2/g) and rich accessible chiral functional sites but also exhibits fluorescence emission, rendering it a good candidate for discrimination of amino acids. Notably, the resultant defective chiral HD-TAPB-DMTP COF can be used as a fluorescent sensor for enantioselective recognition of both tyrosine and phenylalanine enantiomers in water, showing enhanced fluorescent responses for the L conformations over those of the D conformations with enantioselectivity factors being 1.84 and 2.02, respectively. Moreover, molecular docking simulations uncover that stronger binding affinities between chiral HD-TAPB-DMTP COF and L-tyrosine/L-phenylalanine in comparison to those with D-tyrosine/D-phenylalanine play important roles in enantioselective determination. This work provides new insights into the design and construction of highly porous defective chiral COFs for enantioselective fluorescence recognition of amino acids.

Hierarchical porous amorphous metal-organic frameworks constructed from ZnO/MOF glass composites.

For the first time, hierarchical porous amorphous metal-organic frameworks (HP-aMOFs) containing ultramicropores, micropores, and mesopores were synthesized by etching a composite of MOF glass (agZIF-76) and ZnO using ammonia. These materials show potential applications in the adsorption of C2 hydrocarbons.

Raising the Asymmetric Catalytic Efficiency of Chiral Covalent Organic Frameworks by Tuning the Pore Environment.

Chiral covalent organic frameworks (COFs) hold considerable promise in the realm of heterogeneous asymmetric catalysis. However, fine-tuning the pore environment to enhance both the activity and stereoselectivity of chiral COFs in such applications remains a formidable challenge. In this study, we have successfully designed and synthesized a series of clover-shaped, hydrazone-linked chiral COFs, each with a varying number of accessible chiral pyrrolidine catalytic sites. Remarkably, the catalytic efficiencies of these COFs in the asymmetric aldol reaction between cyclohexanone and 4-nitrobenzaldehyde correlate well with the number of accessible pyrrolidine sites within the frameworks. The COF featuring nearly one pyrrolidine moiety at each nodal point demonstrated excellent reaction yields and enantiomeric excess (ee) values, reaching up to 97 and 83%, respectively. The findings not only underscore the profound impact of a deliberately controlled chiral pore environment on the catalytic efficiencies of COFs but also offer a new perspective for the design and synthesis of advanced chiral COFs for efficient asymmetric catalysis.

Facile Microwave-Assisted Synthesis of 2D Imine-Linked Covalent Organic Frameworks for Exceptional Iodine Capture.

Covalent organic frameworks (COFs) have emerged as auspicious porous adsorbents for radioiodine capture. However, their conventional solvothermal synthesis demands multiday synthetic times and anaerobic conditions, largely hampering their practical use. To tackle these challenges, we present a facile microwave-assisted synthesis of 2D imine-linked COFs, Mw-TFB-BD-X, (X = -CH3 and -OCH3) under air within just 1 h. The resultant COFs possessed higher crystallinity, better yields, and more uniform morphology than their solvothermal counterparts. Remarkably, Mw-TFB-BD-CH3 and Mw-TFB-BD-OCH3 exhibited exceptional iodine adsorption capacities of 7.83 g g-1 and 7.05 g g-1, respectively, placing them among the best-performing COF adsorbents for static iodine vapor capture. Moreover, Mw-TFB-BD-CH3 and Mw-TFB-BD-OCH3 can be reused 5 times with no apparent loss in the adsorption capacity. The exceptionally high iodine adsorption capacities and excellent reusability of COFs were mainly attributed to their uniform spherical morphology and enhanced chemical stability due to the in-built electron-donating groups, despite their low surface areas. This work establishes a benchmark for developing advanced iodine adsorbents that combine fast kinetics, high capacity, excellent reusability, and facile rapid synthesis, a set of appealing features that remain challenging to merge in COF adsorbents so far.

Encapsulation of a metal-organic cage-based porous salt in silica nanopores.

A metal-organic cage (MOC)-based porous salt composed of cationic Zr-MOC and anionic Cu-MOC was incorporated into SBA-15 nanopores via a two-step impregnation method for the first time. The encapsulated MOC-based porous salt showed improved iodine adsorption capacity when compared with the bulk sample.

Porous amorphous metal-organic frameworks based on heterotopic triangular ligands for iodine and high-capacity dye adsorption.

The research on amorphous metal-organic frameworks (aMOFs) is still in its infancy, and designing and constructing aMOFs with functional pores remains a challenge. Two aMOFs based on Co(II) and heterotopic triangular ligands with large conjugated aromatic planes, namely aMOF-1 and aMOF-2, were constructed and characterized by IR, XPS, EA, ICP, XANS and so on. aMOF-1 possesses mesopores, whereas aMOF-2 possesses micropores. The porosity, conjugated aromatic plane and uncoordinated N atoms in the framework allow these aMOFs to adsorb iodine and dyes. The iodine adsorption capacity of aMOF-1 is 3.3 g per g, which is higher than that of aMOF-2 (0.56 g per g), mainly due to the expansion or swelling of aMOF-1 after iodine adsorption. The uptake of cationic dyes by aMOF-2 showed more rapid kinetics and a higher removal rate than that by aMOF-1, mainly due to the difference in the porosity and surface charge. Although the surface charges of aMOF-1 and aMOF-2 are negative, both of them showed significantly faster adsorption kinetics toward anionic dyes, among which methyl orange (MO) and Congo red (CR) can be removed in 5 min. This occurs possibly because the quick adsorption of Na+ ions alters the surface charge of the framework and promotes dye uptake. The adsorption capacities of aMOF-1 for MO and CR reached 921 and 2417 mg g-1, respectively. The correlation data for aMOF-2 are 1042 and 1625 mg g-1, respectively. All adsorption capacities are among the highest compared to many cMOFs. Adsorption in mixed dye solution is found to be charge-dependent, kinetic-dependent, and synergetic in these systems. The porosity, surface charge regulation during adsorption, weak interactions and multiple adsorption processes contribute to the dye adsorption performance.

Postmodification of an Amine-Functionalized Covalent Organic Framework for Enantioselective Adsorption of Tyrosine.

The development of chiral covalent organic frameworks (COFs) by postsynthetic modification is challenging due to the common occurrences of racemization and crystallinity decrement under harsh modification conditions. Herein, we employ an effective site-selective synthetic strategy for the fabrication of an amine-functionalized hydrazone-linked COF, NH2-Th-Tz COF, by the Schiff-base condensation between aminoterephthalohydrazide (NH2-Th) and 4,4',4″-(1,3,5-triazine-2,4,6-triyl)tribenzaldehyde (Tz). The resulting NH2-Th-Tz COF with free amine groups on the pore walls provides an appealing platform to install desired chiral moieties through postsynthetic modification. Three chiral moieties including tartaric acid, camphor-10-sulfonyl chloride, and diacetyl-tartaric anhydride were postsynthetically integrated into NH2-Th-Tz COF by reacting amine groups with acid, acyl chloride, and anhydride, giving rise to a series of chiral COFs with distinctive chiral pore surfaces. Moreover, the crystallinity, porosity, and chirality of chiral COFs were retained after modification. Remarkably, the chiral COFs exhibited an exceptional enantioselective adsorption capability toward tyrosine with a maximum enantiomeric excess (ee) value of up to 25.20%. Molecular docking simulations along with experimental results underscored the pivotal role of hydrogen bonds between chiral COFs and tyrosine in enantioselective adsorption. This work highlights the potential of site-selective synthesis as an effective tool for the preparation of highly crystalline and robust amine-decorated COFs, which offer an auspicious platform for the facile synthesis of tailor-made chiral COFs for enantioselective adsorption and beyond.

A new two-dimensional cadmium coordination polymer with 1H-imidazole-4-carboxylate and oxalate.

The title compound, poly[aqua(µ(2)-1H-imidazole-4-carboxylato-κ(3)N(3),O:O')hemi(µ(2)-oxalato-κ(4)O(1),O(2):O(1'),O(2'))cadmium(II)], [Cd(C(4)H(3)N(2)O(2))(C(2)O(4))(0.5)(H(2)O)](n), exhibits a two-dimensional network. The Cd(II) cation is coordinated to one N atom and two carboxylate O atoms from two 1H-imidazole-4-carboxylate (Himc) ligands, two carboxylate O atoms from the bridging oxalate anion and one ligated water molecule; these six donor atoms form a distorted octahedral configuration. The oxalate anion lies on a centre of inversion. The Himc ligands connect the Cd(II) cations to form -Cd-Himc-Cd-Himc-Cd- zigzag chains, with a Cd···Cd separation of 5.8206 (6) Å along the b direction, which are further linked by tetradentate oxalate anions to generate a two-dimensional herringbone architecture in the ab plane. These layers are extended to form a three-dimensional supramolecular framework via O-H···O and N-H···O hydrogen bonds and π-π stacking interactions. The solid-state photoluminscent behaviour of the title compound has been investigated at room temperature.