RESUMO
Silica-supported amine absorbents, including materials produced by tethering aminosilanes or infusion of poly(ethyleneimine), represent a promising class of materials for CO2 capture applications, including direct air and point source capture. Various silica surface treatments and functionalization strategies are explored to enhance stability and CO2 uptake in amine-based solid sorbent systems. Here, the synthesis and characterization of novel vinyltrimethoxysilane-treated Santa Barbara Amorphous-15 (SBA-15) supports and the corresponding enhancement in CO2 uptake compared to various SBA-15-based control supports are presented. The relationship between CO2 diffusion and amine efficiency in these systems is explored using a previously reported kinetic model. The synthesized materials are characterized with CO2 and H2O isotherms, diffuse reflectance infrared Fourier transform spectroscopy, 1H T1-T2 relaxation correlation NMR, and rapid thermal cycling experiments. The novel support materials are shown to enable high amine efficiencies, approaching a fourfold improvement over standard SBA-15-supported amines, while simultaneously exhibiting excellent stability when cycled rapidly under humid conditions. As the poly(ethyleneimine) loadings are held constant across the various samples, enhancements in CO2 uptake are attributed to differences in the way the poly(ethyleneimine) interacts with the support surface.
RESUMO
In this work, we present a facile and scalable hydrolysis-based route for the synthesis of copper-doped TiO2 particles for highly effective light-activated antiviral and antibacterial applications. The performance of the synthesized Cu-doped TiO2 particles is then evaluated using solution-phase antimicrobial photodynamic inactivation assays. We demonstrate that the Cu-doped TiO2 particles can successfully inactivate a wide range of pathogens with exposure to light for 90 min, including bacteria ranging from methicillin-resistant Staphylococcus aureus (99.9999%, â¼6â¯log units) to Klebsiella pneumoniae (99.93%, â¼3.3â¯log units), and viruses including feline calicivirus (99.94%, â¼3.4â¯log units) and HCoV-229E (99.996%, â¼4.6â¯log units), with the particles demonstrating excellent robustness toward photobleaching. Furthermore, a spray-coated polymer film, loaded with the synthesized Cu-doped TiO2 particles achieves inactivation of methicillin-resistant S. aureus up to 99.998% (â¼4.8â¯log units). The presented results provide a clear advance forward in the use of metal-doped TiO2 for aPDI applications, including the scalable synthesis (kg/day) of well-characterized and robust particles, their facile incorporation into a nontoxic, photostable coating that may be easily and cheaply applied to a multitude of surfaces, and a broad efficacy against drug-resistant Gram-positive and Gram-negative bacteria, as well as against enveloped and nonenveloped viruses.
RESUMO
Microfluidic devices and systems have entered many areas of chemical engineering, and the rate of their adoption is only increasing. As we approach and adapt to the critical global challenges we face in the near future, it is important to consider the capabilities of flow chemistry and its applications in next-generation technologies for sustainability, energy production, and tailor-made specialty chemicals. We present the introduction of microfluidics into the fundamental unit operations of chemical engineering. We discuss the traits and advantages of microfluidic approaches to different reactive systems, both well-established and emerging, with a focus on the integration of modular microfluidic devices into high-efficiency experimental platforms for accelerated process optimization and intensified continuous manufacturing. Finally, we discuss the current state and new horizons in self-driven experimentation in flow chemistry for both intelligent exploration through the chemical universe and distributed manufacturing.
Assuntos
Dispositivos Lab-On-A-Chip , Microfluídica , Engenharia QuímicaRESUMO
Titania microspheres have attracted substantial attention for a variety of applications, including ion scavenging, catalysis, and energy generation, though most synthetic techniques are limited to a few basic morphologies and narrow size ranges. Here, an intensified microfluidic strategy for continuous synthesis of anatase titania microspheres is presented. In-flow photo crosslinking, incorporated with a flow reactor and polar aprotic solvent, enables access to precursor compositions up to an order of magnitude higher than those previously reported, with size tunability approaching two orders of magnitude. Morphological and surface area effects associated with precursor composition are explored, resulting in hollow, yolk-shell, macroporous, and dense titania microspheres containing no detectable rutile phase and possessing surface areas exceeding 350 m2 g-1 post calcination. Furthermore, effects of calcination temperature and time on the surface area, crystallinity and phase composition, and morphology of the synthesized titania microspheres are studied in detail. The synthesized microspheres are shown to remain completely in the anatase phase, even at temperatures up to 900 °C, far beyond the expected phase transition temperature. Thus, the breadth of attainable morphologies, specific surface areas, and phase compositions present a variety of intriguing substrate candidates for such applications as heterogeneous (photo) catalysis, adsorption and ion capture, electrochemistry, and photovoltaics.