Cylindrical Micelles by the Self-Assembly of Crystalline-b-Coil Polyphosphazene-b-P2VP Block Copolymers. Stabilization of Gold Nanoparticles.

During the last number of years a variety of crystallization-driven self-assembly (CDSA) processes based on semicrystalline block copolymers have been developed to prepare a number of different nanomorphologies in solution (micelles). We herein present a convenient synthetic methodology combining: (i) The anionic polymerization of 2-vinylpyridine initiated by organolithium functionalized phosphane initiators; (ii) the cationic polymerization of iminophosphoranes initiated by -PR2Cl2; and (iii) a macromolecular nucleophilic substitution step, to prepare the novel block copolymers poly(bistrifluoroethoxy phosphazene)-b-poly(2-vinylpyridine) (PTFEP-b-P2VP), having semicrystalline PTFEP core forming blocks. The self-assembly of these materials in mixtures of THF (tetrahydrofuran) and 2-propanol (selective solvent to P2VP), lead to a variety of cylindrical micelles of different lengths depending on the amount of 2-propanol added. We demonstrated that the crystallization of the PTFEP at the core of the micelles is the main factor controlling the self-assembly processes. The presence of pyridinyl moieties at the corona of the micelles was exploited to stabilize gold nanoparticles (AuNPs).

Direct Functionalization of Poly(spirophosphazene)s via the Regioselective Lithiation of the Aromatic Rings Using a Cooperative Superbase.

The direct chemical functionalization of poly(spirophosphazene) [NP(O2 C12 H8 )]n (1) can be performed by the lithiation of the aromatic rings at low temperature using Schlosser's base (Lit Bu/KOt Bu or "superbase"), and the subsequent reaction with various electrophiles such as ClSiMe3 , ClPPh2 , or MeOB(O2 C6 H12 ) (MeOBpin). The functionalized polymers, isolated in very high yields (>90%) and without degradation of the polymeric chains, have an average degree of substitution per repeat unit ranging from 0.3 (random copolymers) to a maximum of 1.0, which corresponds to the homopolymers [NP(O2 C12 H7 FG)]n (FG (functional group) =SiMe3 , PPh2 , and Bpin). NMR studies, including bidimensional high temperature experiments on silylated and deuterated polymers, show that the substitution is regioselectively occurring at the C3 carbon of the aromatic rings due to the coordination of the lithium cations to the nitrogen of the polyphosphazene chain. The introduction of functional groups on the aromatic rings leads to significant changes in the solubility (silylated polymers), Tg , and electronic properties of the material, showing how the change of substituents in the aromatic rings can lead to polyphosphazenes with properties markedly different from those of the precursor polymer.

Reversible Morphological Evolution of Responsive Giant Vesicles to Nanospheres by the Self-Assembly of Crystalline-b-Coil Polyphosphazene Block Copolymers.

The preparation of long-term-stable giant unilamellar vesicles (GUVs, diameter ≥ 1000 nm) and large vesicles (diameter ≥ 500 nm) by self-assembly in THF of the crystalline-b-coil polyphosphazene block copolymers [N=P(OCH2CF3)2 ]n-b-[N=PMePh]m (4 a: n=30, m=20; 4 b: n=90, m=20; 4 c: n=200, m=85), which combine crystalline [N=P(OCH2CF3)2] and amorphous [N=PMePh] blocks, both of which are flexible, is reported. SEM, TEM, and wide-angle X-ray scattering experiments demonstrated that the stability of these GUVs is induced by crystallization of the [N=P(OCH2CF3)2] blocks at the capsule wall of the GUVS, with the [N=PMePh] blocks at the corona. Higher degrees of crystallinity of the capsule wall are found in the bigger vesicles, which suggests that the crystallinity of the [N=P(OCH2CF3)2] block facilitates the formation of large vesicles. The GUVs are responsive to strong acids (HOTf) and, after selective protonation of the [N=PMePh] block, they undergo a morphological evolution to smaller spherical micelles in which the core and corona roles have been inverted. This morphological evolution is totally reversible by neutralization with a base (NEt3), which regenerates the original GUVs. The monitoring of this process by dynamic light scattering allowed a mechanism to to be proposed for this reversible morphological evolution in which the block copolymer 4 a and its protonated form 4 a(+) are intermediates. This opens a route to the design of reversibly responsive polymeric systems in organic solvents. This is the first reversibly responsive vesicle system to operate in organic media.

Porous films by the self-assembly of inorganic rod-b-coil block copolymers: mechanistic insights into the vesicle-to-pore morphological evolution.

The self-assembly in thin films of polyphosphazene block copolymers [N = P(O2C12H8)]n-b-[N = PMePh]m (O2C12H8 = 2,2'-dioxy-1,1'-biphenyl; : n = 50, m = 35; : n = 20, m = 70, and : n = 245, m = 60), having different volume fractions of the rigid [N = P(O2C12H8)]n block, has been studied. BCP spontaneously self-assembled into well-defined round-shaped macroporous films, observing also, as a minor morphology, spherical vesicles in regions where the film was not formed. A detailed study by SEM, TEM and AFM of the structure of the vesicles, the morphology of the pores (inverted mushroom-shaped), and the behaviour of the copolymers with shorter () and longer () [N = P(O2C12H8)]n rigid blocks provided sufficient experimental evidence to propose a vesicle-to-pore morphological evolution as the most likely mechanism to explain the pore formation during the self-assembly of . Moreover, by changing the volume fraction of the rigid block and the speed of solvent evaporation, it was possible to vary the pore morphology (and their diameter) from isolated regular groups to 3D interconnected pore networks.

Formation and Reversible Morphological Transition of Bicontinuous Nanospheres and Toroidal Micelles by the Self-Assembly of a Crystalline-b-Coil Diblock Copolymer.

We herein report the formation of two complex nanostructures, toroidal micelles and bicontinuous nanospheres, by the self-assembly of the single structurally simple crystalline-b-coil diblock copolymer poly[bis(trifluoroethoxy)phosphazene]-b-poly(styrene), PTFEP-b-PS, in one solvent (THF) and without additives. The nature of these nanostructures in solution was confirmed by DLS and cryo-TEM experiments. The two morphologies are related by means of a new type of reversible morphological evolution, bicontinuous-to-toroidal, triggered by changes in the polymer concentration. WAXS experiments showed that the degree of crystallinity of the PTFEP chains located at the core of the toroids was higher than that in the bicontinuous nanospheres, thus indicating that the final morphology of the aggregates is mostly determined by the ordering of the PTFEP core-forming blocks.

Tuning the Chirality of Block Copolymers: From Twisted Morphologies to Nanospheres by Self-Assembly.

New advances into the chirality effect in the self-assembly of block copolymers (BCPs) have been achieved by tuning the helicity of the chiral-core-forming blocks. The chiral BCPs {[N=P(R)-O2C20H12](200-x)[N=P(OC5H4N)2](x)}-b-[N=PMePh]50 ((R)-O2C20H12 = (R)-1,1'-binaphthyl-2,2'-dioxy, OC5H4N = 4-pyridinoxy (OPy); x = 10, 30, 60, 100 for 3 a-d, respectively), in which the [N=P(OPy)2] units are randomly distributed within the chiral block, have been synthesised. The chiroptical properties of the BCPs ([α]D vs. T and CD) demonstrated that the helicity of the BCP chains may be simply controlled by the relative proportion of the chiral and achiral (i.e., [N=P(R)-O2C20H12] and [N=P(OPy)2], respectively) units. Thus, although 3 a only contained only 5% [N=P(OPy)2] units and exhibited a preferential helical sense, 3 d with 50% of this unit adopted non-preferred helical conformations. This gradual variation of the helicity allowed us to examine the chirality effect on the self-assembly of chiral and helical BCPs (i.e., 3 a-c) and chiral but non-helical BCPs (i.e., 3 d). The very significant influence of the helicity on the self-assembly of these materials resulted in a variety of morphologies that extend from helical nanostructures to pearl-necklace aggregates and nanospheres (i.e., 3 b and 3 d, respectively). We also demonstrate that the presence of pyridine moieties in BCPs 3 a-d allows specific decoration with gold nanoparticles.

Gold-decorated chiral macroporous films by the self-assembly of functionalised block copolymers.

We describe a new and very versatile method to place chosen chemical functionalities at the edge of the pores of macroporous materials. The method is based on the synthesis and self-assembly of inorganic block copolymers (BCPs) having chiral rigid segments bearing controllable quantities of randomly distributed functional groups. The synthesis of a series of optically active block copolyphosphazenes (PP) with the general formula [N=P(R-O2C20H12)(0.9)(FG)(0.2)]n-b-[N=PMePh]m (FG=-OC5H4N (6), -NC4H8S (7), and -NC4H8O (8)), was accomplished by the sequential living cationic polycondensation of N-silylphosphoranimines, using the mono-end-capped initiator [Ph3P=N=PCl3][Cl] (3). The self-assembly of the phosphazene BCPs 6-8 led to chiral porous films. The functionality present on those polymers affected their self-assembly behaviour resulting in the formation of pores of different diameters (D(n)=111 (6), 53 (7) and 77 nm (8)). The specific functionalisation of the pores was proven by decorating the films with gold nanoparticles (AuNPs). Thus, the BCPs 6 and 7, having pyridine and thiomorpholine groups, respectively, were treated with HAuCl4, followed by reduction with NaBH4, yielding a new type of block copolyphosphazenes, which self-assembled into chiral porous films specifically decorated with AuNPs at the edge of the pores.

Twisted morphologies and novel chiral macroporous films from the self-assembly of optically active helical polyphosphazene block copolymers.

A series of optically active helical polyphosphazene block copolymers of general formula R-[N=P(O2C20H12)]n-b-[N=PMePh]m (R-7 a-c) was synthesized and characterized. The polymers were prepared by sequential living cationic polycondensation of N-silylphosphoranimines using the mono-end-capped initiator [Ph3 P=N=PCl3][PCl6] (5) and exhibit a low polydispersity index (ca. 1.3). The temperature dependence of the specific optical activity ([α]D) of R-7 a,b relative to that for the homopolymers R-[N=P(O2C20H12)]n (R-8 a) and the R/S analogues (R/S-7 a,b), revealed that the binaphthoxy-phosphazene segments induce a preferential helical conformation in the [N=PMePh] blocks through a "sergeant-and-soldiers" mechanism, an effect that is unprecedented in polyphosphazenes. The self-assembly of drop-cast thin films of the chiral block copolymer R-7 b (bearing a long chiral and rigid R-[N=P(O2C20H12)] segment) evidenced a transfer of helicity mechanism, leading to the formation of twisted morphologies (twisted "pearl necklace"), not observed in the nonchiral R/S-7 b. The chiral R-7 a and the nonchiral R/S-7 a, self-assemble by a nondirected morphology reconstruction process into regular-shaped macroporous films with chiral-rich areas close to edge of the pore. This is the first nontemplate self-assembly route to chiral macroporous polymeric films with pore size larger than 50 nm. The solvent annealing (THF) of these films leads to the formation of regular spherical nanostructures (ca. 50 nm), a rare example of nanospheres exclusively formed by synthetic helical polymers.

Polyphosphazenes as tunable and recyclable supports to immobilize alcohol dehydrogenases and lipases: synthesis, catalytic activity, and recycling efficiency.

The polyphosphazene {NP[O(2)C(12)H(7.5)(NH(2))(0.5)]}(n), prepared by reacting {NP[O(2)C(12)H(7.5)(NO(2))(0.5)]} with the Lalancette's reagent, was used for attaching enzymes such as alcohol dehydrogenase (ADH-A) and lipase (CAL-B). The resulting new biocatalysts exhibited great potential as tunable supports for enzymatic reactions in both aqueous and organic media. The material with immobilized ADH-A was as efficient as the commercial enzyme to perform stereoselective bioreductions of ketones in aqueous solutions and could be used for the reduction of various aliphatic and aromatic ketones up to 60 degrees C and recycled several times without significant loss of activity even after three months of storage. The biocatalyst obtained with CAL-B was more efficient than the free enzyme for kinetic resolutions in organic solvents and exhibited a moderately good capability of reutilization.

Fast and Chemoselective Addition of Highly Polarized Lithium Phosphides Generated in Deep Eutectic Solvents to Aldehydes and Epoxides.

Highly polarized lithium phosphides (LiPR2 ) were synthesized, for the first time, in deep eutectic solvents as sustainable reaction media, at room temperature and in the absence of protecting atmosphere, through direct deprotonation of both aliphatic and aromatic secondary phosphines (HPR2 ) by n-BuLi. The subsequent addition of in-situ generated LiPR2 to aldehydes or epoxides proceeded quickly and chemoselectively, thereby allowing the straightforward access to the corresponding α- or ß-hydroxy phosphine oxides, respectively, under air and at room temperature (bench conditions), which are traditionally considered as textbook-prohibited conditions in the field of polar organometallic chemistry of s-block elements.

Organolithium-Initiated Polymerization of Olefins in Deep Eutectic Solvents under Aerobic Conditions.

Despite their ubiquitous presence in synthesis, the use of polar organolithium reagents under environmentally benign conditions constitutes one of the greatest challenges in sustainable chemistry. Their high reactivity imposes the use of severely restrictive protocols (e.g., moisture- and oxygen-free, toxic organic solvents, inert atmospheres, low temperatures, etc.). Making inroads towards meeting this challenge, a new air- and moisture-compatible organolithium-mediated methodology for the anionic polymerization of different olefins (e.g., styrenes and vinylpyridines) was established by pioneering the use of deep eutectic solvents (DESs) as an eco-friendly reaction medium in this type of transformation. Fine-tuning of the conditions (sonication of the reaction mixture at 40 °C in the absence of protecting atmosphere) along with careful choice of components of the DES [choline chloride (ChCl) and glycerol (Gly) in a 1:2 ratio] furnished the desired organic polymers (homopolymers and random copolymers) in excellent yields (up to 90 %) and low polydispersities (IPD 1.1-1.3). Remarkably, the in situ-formed polystyril lithium intermediates exhibited a great resistance to hydrolysis in the eutectic mixture 1ChCl/2Gly (up to 1.5 h), hinting at an unexpected high stability of these otherwise highly reactive organolithium species in these unconventional reaction media. This unique stability can be exploited to create well defined block-copolymers.

Polyphosphazenes for the Stille reaction: a new type of recyclable stannyl reagent.

A random phosphazene copolymer {[N = P((CH2)7-Br)Ph]0.5[N = PMePh]0.5}n (2) and a block copolyphosphazene {[N = P((CH2)7-Br)Ph]0.5[N = PMePh]0.5}45-b-[N = P(O2C12H8)]55 (5), having a branch with two randomly distributed units, have been synthesized and used as precursors for the stannyl derivatives {[N = P((CH2)7-SnBu2An)Ph]0.5[N = PMePh]0.5}n (3) and {[N = P((CH2)7-SnBu2An)Ph]0.5[N = PMePh]0.5}45-b-[N = P(O2C12H8)]55 (6, An = p-MeOC6H4). Polymers 3 and 6 were tested as recyclable tin reagents in the Stille cross-coupling reaction with ArI, using various Pd catalysts and different experimental conditions. Polymer 6 can be recycled without a significant release of tin, but its efficiency decreased after three consecutive cycles. This effect was explained by studying the self-assembly of the polymer under the same conditions used for the catalytic experiments, which evidenced the progressive coalescence of the polymeric vesicles (polymersomes) leading to stable and bigger core-shell aggregates by the attraction of the [N = P(O2C12H8)] rich membranes, thus decreasing the accessibility of the tin active centers.

Solid state pathways to complex shape evolution and tunable porosity during metallic crystal growth.

Growing complex metallic crystals, supported high index facet nanocrystal composites and tunable porosity metals, and exploiting factors that influence shape and morphology is crucial in many exciting developments in chemistry, catalysis, biotechnology and nanoscience. Assembly, organization and ordered crystallization of nanostructures into complex shapes requires understanding of the building blocks and their association, and this relationship can define the many physical properties of crystals and their assemblies. Understanding crystal evolution pathways is required for controlled deposition onto surfaces. Here, complex metallic crystals on the nano- and microscale, carbon supported nanoparticles, and spinodal porous noble metals with defined inter-feature distances in 3D, are accomplished in the solid-state for Au, Ag, Pd, and Re. Bottom-up growth and positioning is possible through competitive coarsening of mobile nanoparticles and their site-specific crystallization in a nucleation-dewetted matrix. Shape evolution, density and growth mechanism of complex metallic crystals and porous metals can be imaged during growth.

Macromolecular polyradicals with cyclic triphosphazene as a core. Spectral and electrochemical properties.

Stable cyclotriphosphazenes 5 and 6, with three and four carbon radical centers, have been prepared by condensation of (4-hydroxy-2,6-dichlorophenyl)bis(2,4,6-trichlorophenyl)methyl radical (4) with tetrachloro-2,2'-dioxybiphenylcyclotriphosphazene (7). EPR studies of both polyradicals in fluid solution suggest an electronic communication through the PN multiple bonds of the cycle. EPR spectral results in frozen solutions and magnetic susceptibility measurements in the solid are consistent with very weak electron-electron dipolar interactions. Reductive cyclic voltammetry shows a single three-electron redox couple for triradical 5 and a single four-electron redox couple for tetraradical 6. Both polyradicals 5 and 6 have been chemically oxidized to a stable trication 5(3+) and a tetracation 6(4+), respectively, by electron-transfer reactions.

Molecular dynamics (MD) simulations and large-angle X-ray scattering (LAXS) studies of the solid-state structure and assembly of isotactic (R)-poly(2,2'-dioxy-1,1'-binaphthyl-)phosphazene in the bulk state and in the cast film.

The intrachain conformation, molecular structure and interchain assembly of isotactic (R)-poly(2,2'-dioxy-1,1'-binaphthyl)phosphazene (P-DBNP) both in the bulk state (I) and in the cast film (II) were studied by molecular dynamics (MD) simulations of models, as implemented by a bias potential for the analysis of the radial distribution function (RDF) obtained from large-angle X-ray scattering (LAXS) data. The microscopic structure and order extension of the polymer changed from I to II, as qualitatively shown in the shapes of their experimentally measured RDF curves. With the use of a bias potential, the MD simulations provided a much more accurate analysis of the models, as seen in the reproduction of the RDFs. The chiral P-DBNP chain was found to be consistent with helix conformations in both the I and the II samples. The predominant interchain clustering motif was best reproduced with a seven-chain model. In the case of I, the maximum chain length was 18 monomeric -R(2)NP- units, while in the case of the cast film II the chain was more elongated, up to distances of approximately 100 A, equivalent to over 48 monomeric -R(2)NP- units. The seven-chain assembly was accounted for in terms of nonbonded interactions favouring the minimum voids area between the seven tubular structures of the material. The results validate our earlier finding that MD analysis with implementation of a biasing potential for the RDFs can provide quantitative information on the structural and conformational features of amorphous solids. The combined theoretical and experimental approach was found to be a useful tool to detect, locate and evaluate the intra- and intermolecular modifications of materials subsequent to their phase transformation and, as in the present case, changes in their microscopic structures or preparation methods.

A simplified and convenient laboratory-scale preparation of 14N or 15N high molecular weight poly(dichlorophosphazene) directly from PCl5.

A simple and convenient one-pot synthesis of THF solutions of high molecular weight poly(dichlorophosphazene) [NPCl(2)](n), or the (15)N isotopomer [(15)NPCl(2)](n), starting directly from PCl(5) and NH(4)Cl or (15)NH(4)Cl in a solution of 1,2,4-trichlorobenzene in the presence of sulfamic acid and calcium sulfate dihydrate, is described. The solutions of [NPCl(2)](n) in THF, which are obtained free of poly(tetrahydrofuran) by preparing them in the presence of K(2)CO(3), can be reacted directly with phenols, biphenols, or even HO-CH(2)CF(3) in the presence of K(2)CO(3) or Cs(2)CO(3) to obtain, after a very simple workup, the corresponding polyphosphazene derivatives almost free of chlorine.