Exploring Bacillus amyloliquefaciens strain OM81 for the production of polyhydroxyalkanoate (PHA) bioplastic using olive mill wastewater.

In this study, bacterial strains isolated from olive oil mill wastewater assigned to Bacillus (n = 4) and Klebsiella (n = 1) genera, were evaluated for their ability to accumulate intracellular PHA granules using Sudan Black staining. A maximum PHA production of 0.14 g/L (i.e., 30.2% wt./wt. in dry biomass) was observed in Bacillus amyloliquefaciens strain OM81 after 72 h of incubation in the presence of 2% glucose (synthetic medium). To reduce bioplastic production costs and recover a polluting product, olive mill wastewater was tested as a carbon source. In this context, the maximum growth (1.45 g/L) was observed in the presence of 50% olive mill wastewater. After extracting the biopolymers with chloroform, quantitative and qualitative analyses were conducted using Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). FTIR showed an absorption band at 1730 cm-1 assigned to the elongation of the PHB carbonyl groups. This approach offers a dual benefit of reducing pollution and bioplastic production costs. The Bacillus amyloliquefaciens strain OM81 showed promising results for PHAs production, making it a potential candidate for further investigation. Supplementary Information: The online version contains supplementary material available at 10.1007/s13205-023-03808-4.

Laser-induced porous graphene electrodes from polyketimine membranes for paracetamol sensing.

The development of cost-effective materials for fabricating electrodes is crucial for drug, pharmaceutical and environmental applications. This paper presents the synthesis and characterization of a novel polyketimine (PKI) membrane obtained by condensing partially of different weight percentages of oxidized polyvinyl alcohol and aminated polyether sulfone. Using the PKI membrane as a scaffold, we introduced laser-induced graphene electrodes (LIGEs) for the efficient electrochemical sensing of paracetamol (PCM), which serves as a model drug. Electrochemical measurements were conducted to assess the physico-chemical properties, including laser-induced porous graphene features, such as the heterogeneous electron transfer (HET) rate and electrochemically active surface area (ECSA). The obtained results demonstrate that the LIGEs exhibit excellent performance in PCM sensing, showing a linear detection range of 50-600 µM with a detection limit (LOD) as low as 14.3 µM and a good selectivity toward uric acid. Furthermore, the functionalization of the electrode surface with AuNPs improved the electrode physico-chemical properties (HET and ECSA) and lowered the detection limit down to 1.1 µM. Consequently, these affordable electrodes hold great potential for analysing other drugs and detecting heavy metal cations in various applications.

Physicochemical characterization of chitin extracted by different treatment sequences from an edible insect.

Chitin present in the shell of edible insects is a potential source of chitin, lipids, and proteins, and it exerts various biological activities. Thus far, only a few studies have focused on the use of chitin as a source of high-protein-diet oligosaccharides. The use of insect chitin for the production of high-protein-diet oligosaccharides can lessen the reliance on diet crops. Moreover, although chitin composition in Tenebrio molitor larva, pupa, and adult has been extensively investigated, chitin extraction from T. molitor larval whole body and exuvium has received poor attention. The present study compared the effectiveness of two techniques for extracting high-protein-diet chitin oligosaccharide from an edible insect (T. molitor). Two different extraction sequences of chitin from the larval stage (molitor stage larvae) and adult stage (molitor stage adult) of edible T. molitor were investigated. Two processing steps were employed: (a) deproteinization (DEP) and (b) demineralization (DEM) treatments. Differences in the order, conditions, and period of their application resulted in two different chitin extraction procedures. The viscosity, degree of polymerization, and crystallinity index of the chitin extracted using the two procedures were measured, and its chemical components (chitin, ash, protein, fat, and moisture contents) were determined. T. molitor adults and larvae treated sequentially with DEM-DEP demonstrated the greatest yield of approximately 14.62 % ± 0.15 and 6.096 % ± 0.10 %, respectively. By contrast, when treated sequentially with DEP-DEM, the recorded yields were 10.96 % ± 0.18 and 5.31 % ± 0.38, respectively. Differences in the degree of deacetylation between both methods were observed. Additionally, Fourier transform infrared spectroscopy and X-ray diffractometry of the extracted chitin along with a commercial sample revealed consistent chain conformation, mean hydrogen bonding, and crystallinity index. In this way, residues produced by farmed edible insects can be recovered and used as a novel source of chitin.

Characterization of hemoglobin immobilized in MgAl-layered double hydroxides by the coprecipitation method.

Hemoglobin was immobilized in Mg(2)Al-Layered Double Hydroxides (LDH) by coprecipation method at pH 9.0. Interactions between Hb and LDH particles were investigated by X-ray diffraction patterns, FTIR, UV-vis, circular dichroism, and fluorescence spectroscopies. Morphology and porosity of Mg(2)Al-Hb(cop) biohybrid are analyzed from SEM and TEM images and permeability measurement. The direct electron transfer of immobilized Hb was studied by cyclic voltammetry, and the electrocatalytic activity was evaluated at glassy carbon modified with this Mg(2)Al-Hb(cop) biohybrid. Even though the percentage of electroactive Hb was less than 2%, this bioelectrode showed a low detection limit (1.5 x 10(-8) M) and a very high sensitivity (37 A/M cm(2)) for the amperometric detection of H(2)O(2).

Direct electron transfer and enhanced electrocatalytic activity of hemoglobin at iron-rich clay modified electrodes.

The possible role of structural iron in clays to promote direct electron transfer of hemoglobin (Hb) was investigated. Clays containing different amounts of iron situated in octahedral or tetrahedral sites have been used to modify glassy carbon electrodes: nontronite, synthetic montmorillonite, and saponite. A synthetic montmorillonite containing non-iron impurities was used as a reference. Interactions between Hb and these clays were studied with the establishment of adsorption isotherms and by the analysis of X-ray diffraction patterns, FTIR, and UV-vis spectra of the Hb-clay samples. The electrochemical behavior of clay modified electrodes (CME) was characterized by cyclic voltammetry in the presence of Hb in solution or adsorbed within the clays. Nontronite, which contains the highest amount of structural iron, enhanced significantly direct electron transfer of Hb. Finally, the electrocatalytic behavior of Hb-Nontronite CME in the presence of hydrogen peroxide was also studied, and the H(2)O(2) calibration curve was recorded under amperometric conditions for different bioelectrode configurations.