Orai1 expression pattern in tooth and craniofacial ectodermal tissues and potential functions during ameloblast differentiation.

BACKGROUND: Orai1 is a plasma membrane protein that forms the pore of the calcium release activated calcium channel. Humans with mutated Orai1 present with hereditary combined immunodeficiency, congenital myopathy and anhidrotic ectodermal dysplasia. Consistent with the ectodermal dysplasia phenotype, enamel formation and mineralization is also abnormal in Orai1 deficient patients. The expression pattern and potential functions of Orai1 in enamel formation remains unclear. To contribute toward understanding the role of Orai1 in amelogenesis we characterized ORAI1 protein developmental pattern in comparison with other ectodermal organs. We also examined the effects of Orai1 down-regulation in ameloblast cell proliferation and differentiation. RESULTS: Our data show strong expression of ORAI1 protein during the ameloblast secretory stage, which weans at the end of the maturation stage. In salivary glands, ORAI1 is expressed mainly in acini cells. ORAI1 expression is also found in hair follicle and oral epithelium. Knockdown of Orai1 expression decreases cell proliferation and results in RNA expression levels changes of key ameloblast genes regulating enamel thickness and mineralization. CONCLUSIONS: This study provides insights in the anhidrotic ectodermal dysplasia phenotype due to Orai1 mutation and highlights the importance of calcium signaling in controlling ameloblast differentiation and maturation during tooth development.

Tailored Coatings for Enhanced Performance of Zinc-Magnesium Alloys in Absorbable Implants.

Absorbable metals exhibit potential for next-generation temporary medical implants, dissolving safely in the body during tissue healing and regeneration. Their commercial incorporation could substantially diminish the need for additional surgeries and complications that are tied to permanent devices. Despite extensive research on magnesium (Mg) and iron (Fe), achieving the optimal combination of mechanical properties, biocompatibility, and controlled degradation rate for absorbable implants remains a challenge. Zinc (Zn) and Zn-based alloys emerged as an attractive alternative for absorbable implants, due to favorable combination of in vivo biocompatibility and degradation behavior. Moreover, the development of suitable coatings can enhance their biological characteristics and tailor their degradation process. In this work, four different biodegradable coatings (based on zinc phosphate (ZnP), collagen (Col), and Ag-doped bioactive glass nanoparticles (AgBGNs)) were synthesized by chemical conversion, spin-coating, or a combination of both on Zn-3Mg substrates. This study assessed the impact of the coatings on in vitro degradation behavior, cytocompatibility, and antibacterial activity. The ZnP-coated samples demonstrated controlled weight loss and a decreased corrosion rate over time, maintaining a physiological pH. Extracts from the uncoated, ZnP-coated, and Col-AgBGN-coated samples showed higher cell viability with increasing concentration. Bacterial viability was significantly impaired in all coated samples, particularly in the Col-AgBGN coating. This study showcases the potential of a strategic material-coating combination to effectively tackle multiple challenges encountered in current medical implant technologies by modifying the properties of absorbable metals to tailor patient treatments.

Unraveling the mechanisms of inhibition of silver-doped bioactive glass-ceramic particles.

Infections are a major concern in orthopedics. Antibacterial agents such as silver ions are of great interest as broad-spectrum biocides and have been incorporated into bioactive glass-ceramic particles to control the release of ions within a therapeutic concentration and provide tissue regenerative properties. In this work, the antibacterial capabilities of silver-doped bioactive glass (Ag-BG) microparticles were explored to reveal the unedited mechanisms of inhibition against methicillin-resistant Staphylococcus aureus (MRSA). The antibacterial properties were not limited to the delivery of silver ions but rather a combination of antibacterial degradation by-products. For example, nano-sized debris punctured holes in bacteria membranes, osmotic effects, and reactive oxygen species causing oxidative stress and almost 40% of the inhibition. Upon successive Ag-BG treatments, MRSA underwent phenotypic and genomic mutations which were not only insufficient to develop resistance but instead, the clones became more sensitive as the treatment was re-delivered. Additionally, the unprecedented restorative functionality of Ag-BG allowed the effective use of antibiotics that MRSA resists. The synergy mechanism was mainly identified for combinations targeting cell-wall activity and their action was proven in biofilm-like and virulent conditions. Unraveling these mechanisms may offer new insights into how to tailor healthcare materials to prevent or debilitate infections and join the fight against antibiotic resistance in clinical cases.

High Boron Content Enhances Bioactive Glass Biodegradation.

Derived Hench bioactive glass (BaG) containing boron (B) is explored in this work as it plays an important role in bone development and regeneration. B was also found to enhance BaG dissociation. However, it is only possible to incorporate a limited amount of B. To increase the amount of B in BaG, bioactive borosilicate glasses (BaG-Bx) were fabricated based on the use of the solution-gelation process (sol-gel). In this work, a high B content (20 wt.%) in BaG, respecting the conditions of bioactivity and biodegradability required by Hench, was achieved for the first time. The capability of BaG-Bx to form an apatite phase was assessed in vitro by immersion in simulated body fluid (SBF). Then, the chemical structure and the morphological changes in the fabricated BaG-Bx (x = 0, 5, 10 and 20) were studied. The formation of hydroxyapatite (HAp) layer was observed with X-ray diffraction (XRD) and infrared (IR) spectroscopy. The presence of HAp layer was confirmed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Enhanced bioactivity and chemical stability of BaG-Bx were evaluated with an ion exchange study based on Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES) and energy dispersive spectroscopy (EDS). Results indicate that by increasing the concentration of B in BaG-Bx, the crystallization rate and the quality of the newly formed HAp layer on BaG-Bx surfaces can be improved. The presence of B also leads to enhanced degradation of BaGs in SBF. Accordingly, BAG-Bx can be used for bone regeneration, especially in children, because of its faster degradation as compared to B-free glass.

Silver-releasing bioactive glass nanoparticles for infected tissue regeneration.

Bacterial infections represent a formidable challenge, often leaving behind significant bone defects post-debridement and necessitating prolonged antibiotic treatments. The rise of antibiotic-resistant bacterial strains further complicates infection management. Bioactive glass nanoparticles have been presented as a promising substitute for bone defects and as carriers for therapeutic agents against microorganisms. Achieving consistent incorporation of ions into BGNs has proven challenging and restricted to a maximum ion concentration, especially when reducing the particle size. This study presents a notable achievement in the synthesis of 10 nm-sized Ag-doped bioactive glass nanoparticles (Ag-BGNs) using a modified yet straightforward Stöber method. The successful incorporation of essential elements, including P, Ca, Al, and Ag, into the glass structure at the intended concentrations (i.e., CaO wt% above 20 %) was confirmed by EDS, signifying a significant advancement in nanoscale biomaterial engineering. While exhibiting a spherical morphology and moderate dispersity, these nanoparticles tend to form submicron-sized aggregates outside of a solution state. The antibacterial effectiveness against MRSA was established across various experimental conditions, with Ag-BGNs effectively sterilizing planktonic bacteria without the need for antibiotics. Remarkably, when combined with oxacillin or fosfomycin, Ag-BGNs demonstrated a potent synergistic effect, restoring antibacterial capabilities against MRSA strains resistant to these antibiotics when used alone. Ag-BGNs exhibited potential in promoting human mesenchymal stromal cell proliferation, inducing the upregulation of osteoblast gene markers, and significantly contributing to bone regeneration in mice. This innovative synthesis protocol holds substantial promise for the development of biomaterials dedicated to the regeneration of infected tissue.

Materials for restoring lost Activity: Old drugs for new bugs.

The escalation of bacterial resistance to conventional medical antibiotics is a serious concern worldwide. Improvements to current therapies are urgently needed to address this problem. The synergistic combination of antibiotics with other agents is a strategic solution to combat multi-drug-resistant bacteria. Although these combinations decrease the required high dosages and therefore, reduce the toxicity of both agents without compromising the bactericidal effect, they cannot stop the development of further resistance. Recent studies have shown certain elements restore the ability of antibiotics to destroy bacteria that have acquired resistance to them. Due to these synergistic activities, organic and inorganic molecules have been investigated with the goal of restoring antibiotics in new approaches that mitigate the risk of expanding resistance. Herein, we summarize recent studies that restore antibiotics once thought to be ineffective, but have returned to our armamentarium through innovative, combinatorial efforts. A special focus is placed on the mechanisms that allow the synergistic combinations to combat bacteria. The promising data that demonstrated restoration of antimicrobials, supports the notion to find more combinations that can combat antibiotic-resistant bacteria.

Highlights on Advancing Frontiers in Tissue Engineering.

The field of tissue engineering continues to advance, sometimes in exponential leaps forward, but also sometimes at a rate that does not fulfill the promise that the field imagined a few decades ago. This review is in part a catalog of success in an effort to inform the process of innovation. Tissue engineering has recruited new technologies and developed new methods for engineering tissue constructs that can be used to mitigate or model disease states for study. Key to this antecedent statement is that the scientific effort must be anchored in the needs of a disease state and be working toward a functional product in regenerative medicine. It is this focus on the wildly important ideas coupled with partnered research efforts within both academia and industry that have shown most translational potential. The field continues to thrive and among the most important recent developments are the use of three-dimensional bioprinting, organ-on-a-chip, and induced pluripotent stem cell technologies that warrant special attention. Developments in the aforementioned areas as well as future directions are highlighted in this article. Although several early efforts have not come to fruition, there are good examples of commercial profitability that merit continued investment in tissue engineering. Impact statement Tissue engineering led to the development of new methods for regenerative medicine and disease models. Among the most important recent developments in tissue engineering are the use of three-dimensional bioprinting, organ-on-a-chip, and induced pluripotent stem cell technologies. These technologies and an understanding of them will have impact on the success of tissue engineering and its translation to regenerative medicine. Continued investment in tissue engineering will yield products and therapeutics, with both commercial importance and simultaneous disease mitigation.

3D printed bioactive and antibacterial silicate glass-ceramic scaffold by fused filament fabrication.

The fused filament fabrication (FFF) technique was applied for the first time to fabricate novel 3D printed silicate bioactive and antibacterial Ag-doped glass-ceramic (Ag-BG) scaffolds. A novel filament consisting primarily of polyolefin and Ag-BG micro-sized particles was developed and its thermal properties characterized by thermogravimetric analysis (TGA) to define the optimum heat treatment with minimal macrostructural deformation during thermal debinding and sintering. Structural characteristics of the Ag-BG scaffolds were evaluated from macro- to nanoscale using microscopic and spectroscopic techniques. The compressive strength of the Ag-BG scaffolds was found to be in the range of cancellous bone. Bioactivity of the 3D printed Ag-BG scaffolds was evaluated in vitro through immersion in simulated body fluid (SBF) and correlated to the formation of an apatite-like phase. Methicillin-resistant Staphylococcus aureus (MRSA) inoculated with the Ag-BG scaffolds exhibited a significant decrease in viability underscoring a potent anti-MRSA effect. This study demonstrates the potential of the FFF technique for the fabrication of bioactive 3D silicate scaffolds with promising characteristics for orthopedic applications.

Silver-doped bioactive glass particles for in vivo bone tissue regeneration and enhanced methicillin-resistant Staphylococcus aureus (MRSA) inhibition.

Infection is a significant risk factor for failed healing of bone and other tissues. We have developed a sol-gel (solution-gelation) derived bioactive glass doped with silver ions (Ag-BG), tailored to provide non-cytotoxic antibacterial activity while significantly enhancing osteoblast-lineage cell growth in vitro and bone regeneration in vivo. Our objective was to engineer a biomaterial that combats bacterial infection while maintaining the capability to promote bone growth. We observed that Ag-BG inhibits bacterial growth and potentiates the efficacy of conventional antibiotic treatment. Ag-BG microparticles enhance cell proliferation and osteogenic differentiation in human bone marrow stromal cells (hBMSC) in vitro. Moreover, in vivo tests using a calvarial defect model in mice demonstrated that Ag-BG microparticles induce bone regeneration. This novel system with dual biological and advanced antibacterial properties is a promising therapeutic for combating resistant bacteria while triggering new bone formation.

Self-assembling human heart organoids for the modeling of cardiac development and congenital heart disease.

Congenital heart defects constitute the most common human birth defect, however understanding of how these disorders originate is limited by our ability to model the human heart accurately in vitro. Here we report a method to generate developmentally relevant human heart organoids by self-assembly using human pluripotent stem cells. Our procedure is fully defined, efficient, reproducible, and compatible with high-content approaches. Organoids are generated through a three-step Wnt signaling modulation strategy using chemical inhibitors and growth factors. Heart organoids are comparable to age-matched human fetal cardiac tissues at the transcriptomic, structural, and cellular level. They develop sophisticated internal chambers with well-organized multi-lineage cardiac cell types, recapitulate heart field formation and atrioventricular specification, develop a complex vasculature, and exhibit robust functional activity. We also show that our organoid platform can recreate complex metabolic disorders associated with congenital heart defects, as demonstrated by an in vitro model of pregestational diabetes-induced congenital heart defects.

Bioactive Glass Nanoparticles for Tissue Regeneration.

Sol-gel-derived bioactive glass nanoparticles have attracted special interest due to their potential as novel therapeutic and regenerative agents. Significant challenges are yet to be addressed. The fabrication of sol-gel-derived nanoparticles in binary and ternary systems with an actual composition that meets the nominal has to be achieved. This work addresses this challenge and delivers nanoparticles in a ternary system with tailored composition and particle size. It also studies how specific steps in the fabrication process can affect the incorporation of the metallic ions, nanoparticle size, and mesoporosity. Sol-gel-derived bioactive glass nanoparticles in the 62 SiO2-34.5 CaO-3.2 P2O5 (mol %) system have been fabricated and characterized for their structural, morphological, and elemental characteristics using Fourier transform infrared spectroscopy, X-ray diffraction analysis, scanning electron microscopy associated with elemental analysis, transmission electron microscopy, and solid-state nuclear magnetic resonance. The fabricated nanoparticles were additionally observed to form the apatite phase when immersed in simulated body fluid. This work highlights the effect of the different processing variables, such as the nature of the solvent, the order in which reagents are added, stirring time, and the concentrations in the catalytic solution on the controlled incorporation of specific ions (e.g., P and Ca) in the nanoparticle network and particle size.

Sol-Gel-Derived Bioactive and Antibacterial Multi-Component Thin Films by the Spin-Coating Technique.

Although metallic alloys commonly used as prosthetics are durable and mechanically strong, they are often bioinert and lack antibacterial properties. Implementing a bioactive glass material with antibacterial properties as a coating on a metallic substrate provides mechanical strength and bioactivity, as well as antibacterial properties. Many coating methods have been extensively investigated; however, most of them can be expensive, are difficult to scale up, or do not form thin films, which could prevent their translation to clinical practice. The formation of thin films by spin-coating multi-component solution-gelation (sol-gel)-derived glass with antibacterial and bioactive properties has not been achieved previously. For this study, stainless steel 316L substrates were spin-coated with a sol-gel-derived bioactive and antibacterial glass coating in SiO2 58.3-P2O5 7.1-CaO 25.6-Al2O5 5.4-Ag2O 2.1-Na2O 1.5 wt% system (Ag-BG). A sol-gel processing condition that avoids elemental separation upon spin-coating when sintering happens at below the calcination temperature (500 °C) has been developed. This work demonstrates that silver reduction occurs when the concentrations of other cations such as Ca2+ and Na+ in the solution increase. Increasing the stirring duration time prior to the increase of cations, Ag+ ions are stabilized by aluminum tetrahedra, and their reduction to metallic silver does not occur. This study also shows that large dilution ratios (water:tetraethyl orthosilicate) greater than 25:1, accompanied by long stirring durations, produce morphologically homogeneous coatings. Using this strategy, thin films were formed with antibacterial properties against methicillin-resistant Staphylococcus aureus (MRSA) biofilm and biological responses that promote eukaryotic cell adhesion and proliferation. In total, the improved synthesis strategy opens new avenues for the development of novel bioactive and antibacterial thin-film coatings, as it reveals the processing characteristics that control the physicochemical and morphological properties of the formed films.

Resurrection of antibiotics that methicillin-resistant Staphylococcus aureus resists by silver-doped bioactive glass-ceramic microparticles.

This work describes a novel strategy to combat methicillin-resistant Staphylococcus aureus (MRSA) via the reactivation of inert antibiotics. This strategy exploits a multifunctional system consisting of bioactive glass-ceramic microparticles with antibacterial properties combined with various antibiotics to kill MRSA. Specifically, sol-gel derived silver-doped bioactive glass-ceramic microparticles (Ag-BG) combined with antibiotics that MRSA resists such as oxacillin or fosfomycin, significantly decreased the viability of MRSA. Ag-BG also potentiated the activity of vancomycin on static bacteria, which are typically resistant to this antibiotic. Notably, the synergistic activity is restricted to cell-envelope acting antibiotics as Ag-BG supplementation did not increase the efficacy of gentamicin. Bacteria viability assays and electron microscopy images demonstrate that Ag-BG synergizes to restore antibacterial activity to antibiotics that MRSA resists. The low cytotoxicity previously studied against oral bacteria, together with the known regenerative properties presented in previous studies, and the unique antibacterial properties observed in this work when they are combined with antibiotics, make this multifunctional system a promising approach for healing infected tissue. STATEMENT OF SIGNIFICANCE: This study addresses a very significant issue in the field of antibiotic resistance presenting an innovative way to clear MRSA, by utilizing bioactive glass-ceramic microparticles in combination with antibiotics. Multifunctional glass-ceramic microparticles doped with silver ions (Ag-BG) have been previously observed to exhibit bioactive and antibacterial properties. In this study Ag-BG microparticles were observed to synergize with antibiotics restoring their sensitivity against MRSA. This research work presents a novel approach to resurrect ineffective antibiotics and render them effective against MRSA. Cytotoxicity to eukaryotic cells is not anticipated, as it has been previously observed that these microparticles can trigger hard and soft dental tissue regeneration, when they are utilized in certain concentrations. This study opens a new avenue in the treatment of multidrug resistance bacteria.

Silver-Doped Bioactive Glass/Chitosan Hydrogel with Potential Application in Dental Pulp Repair.

The major indications of a successful inflamed-pulp-capping procedure are the formation of a dense calcified dentin barrier and the preservation of healthy pulp tissue concomitant with elimination of inflammation. Our aim is to evaluate the effects of an injectable silver-doped bioactive glass/chitosan hydrogel (Ag-BG/CS), as a pulp-capping material, and explore the molecular mechanisms of Ag-BG/CS in regards to its bioactive and anti-inflammatory properties. First, the structure and component of the material were analyzed by scanning electron microscopy. Then, the downstream molecular mechanisms and anti-inflammatory effects were characterized by quantitative polymerase chain reaction (qPCR) and Western blot. Finally, a preclinical model of rat pulpitis was used to explore the potential of Ag-BG/CS in controlling pulp inflammation in vivo. The results showed that Ag-BG/CS induced stronger reparative dentin formation and enhanced preservation of vital pulp tissue when compared to the mineral trioxide aggregate (MTA) which is the currently used clinical standard. Ag-BG/CS also significantly increased the phosphorylation of p38 and ERK1/2(p42/44) of dental pulp cells, indicating that Ag-BG/CS enhanced pulpal repair through the mitogen-activated protein kinase (MAPK) pathway. This novel material may represent a superior solution for dental pulp-capping clinical scenarios with specific advantages for cases of early diffuse pulpitis in immature permanent teeth.

Biological properties of modified bioactive glass on dental pulp cells.

Dental caries is a bacteria-caused condition classified among the most common chronic diseases worldwide. Treatment of dental caries implies the use of materials having regenerative and anti-bacterial properties, and controlling inflammation is critical for successful endodontic regeneration. OBJECTIVES: The aim of this study was to fabricate and characterize a novel composite incorporating sol-gel derived silver-doped bioactive glass (BG) in a chitosan (CS) hydrogel at a 1:1 wt ratio(Ag-BG/CS). METHODS: The effect of Ag-BG/CS on dental pulp cells (DPCs) proliferation was analyzed by CCK-8 assay, whereas the adhesion of DPCs was evaluated by confocal microscopy. The physical morphology of Ag-BG/CS was analyzed by scanning electron microscope. The anti-inflammatory effect of Ag-BG/CS was investigated by quantitative polymerase chain reaction (qPCR). Moreover, the effect of Ag-BG/CS on odontogenic differentiation of DPCs was studied by immunochemical staining, tissue-nonspecific alkaline phosphatase staining, qPCR, and western blot analyses. The antibacterial activity against dental caries key pathogenic bacteria was also evaluated. RESULTS: The results of this study showed that Ag-BG/CS did not affect the proliferation of DPCs, it down-regulated the inflammatory-associated markers (IL-1ß, IL-6, IL-8, TNF-α) of DPCs treated with Escherichia coli lipopolysaccharide (LPS) by inhibiting NF-κB pathway, and enhanced the in vitro odontogenic differentiation potential of DPCs. Furthermore, Ag-BG/CS strongly inhibited Streptococcus mutans and Lactobacillus casei growth. CONCLUSIONS: This novel biomaterial possessed antibacterial and anti-inflammatory activity, also enhanced the odontogenic differentiation potential of LPS-induced inflammatory-reacted dental pulp cells. The material introduced in this study may thus represent a suitable dental pulp-capping material for future clinical applications.

Fabrication and multiscale characterization of 3D silver containing bioactive glass-ceramic scaffolds.

In this work, we fabricated and characterized bioactive 3D glass-ceramic scaffolds with inherent antibacterial properties. The sol-gel (solution-gelation) technique and the sacrificial template method were applied for the fabrication of 3D highly porous scaffolds in the 58.6SiO2 - 24.9CaO - 7.2P2O5 - 4.2Al2O3 - 1.5Na2O -1.5K2O - 2.1Ag2O system (Ag-BG). This system is known for its advanced bioactive and antibacterial properties. The fabrication of 3D scaffolds has potential applications that impact tissue engineering. The study of the developed scaffolds from macro-characteristics to nano-, revealed a strong correlation between the macroscale properties such as antibacterial action, bioactivity with the microstructural characteristics such as elemental analysis, crystallinity. Elemental homogeneity, morphological, and microstructural characteristics of the scaffolds were studied by scanning electron microscopy associated with energy dispersive spectroscopy (SEM-EDS), transmittance electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), and UV-visible spectroscopy methods. The compressive strength of the 3D scaffolds was measured within the range of values for glass-ceramic scaffolds with similar compositions, porosity, and pore size. The capability of the scaffolds to form an apatite-like phase was tested by immersing the scaffolds in simulated body fluid (SBF) and the antibacterial response against methicillin-resistant Staphylococcus aureus (MRSA) was studied. The formation of an apatite phase was observed after two weeks of immersion in SBF and the anti-MRSA effect occurs after both direct and indirect exposure.

In Vitro Caries Models for the Assessment of Novel Restorative Materials.

Due to the high failure rates of traditional dental restorations, there is an ongoing effort to develop modified and new restorative biomaterials in dentistry. Being the most commonly used restorative material, most of these efforts primarily aim to improve dental composite. Generally, the main objective of such modifications is to enhance the restorative physical and antimicrobial properties in order to limit micro-leakage and inhibit bacterial biofilm cultivation. Herein, we describe the process of designing a simple in vitro model to assess the physical and antimicrobial properties of novel restorative materials in addition to evaluating their effect on the fragile balance between enamel de- and remineralization.

In Vivo Rodent Models for Studying Dental Caries and Pulp Disease.

Dental caries is an infectious oral disease caused primarily by complex interactions of cariogenic oral flora (biofilm) with dietary carbohydrates on the tooth surface over time. Streptococcus mutans and Streptococcus sobrinus (S. mutans and S. sobrinus) are the most prevalent cariogenic species within the oral biofilm and considered the main etiological agents of caries. Pulp exposure and infection can be caused by trauma, carious lesion, and mechanical reasons. Pulp response to these exposures depends on the state of the pulp as well as the potential bacterial contamination of pulp tissue. Herein, we describe the process of using two in vivo rodent models to study the progression of dental caries and pulp disease: a nutritional microbial model and a pulp disease induction model. The progression of the carious lesion and pulpal infections in both models was assessed by micro-CT imaging and histomorphometric analysis. Moreover, the pulp disease induction models can be used to compare and assess the antibacterial and reparative properties of the different pulp capping materials.

Microstructural characterization and comparative evaluation of physical, mechanical and biological properties of three ceramics for metal-ceramic restorations.

OBJECTIVES: A wide variety of dental ceramics compositions have been introduced in dental clinical practice in order to combine desired aesthetics with superior mechanical performance. The aim of the present study was to investigate the microstructural changes in three dental ceramics after their sintering according to manufacturers' instructions and to comparatively evaluate some of their physical, mechanical and biological properties. METHODS: The analysis of the phases present in each material before and after sintering was performed with scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction analysis (XRD). The thermal properties of ceramic specimens were evaluated with differential thermal and thermogravimetric analysis (TG-DTA). The mechanical properties evaluated were fracture toughness, Young's modulus and microhardness with the Vickers indentation method. MTT assay was used for cell proliferation assessment. One-way analysis of variance (ANOVA) with Bonferroni multiple comparisons tests was used to determine statistically significant differences (significance level of p<0.05). RESULTS: Results showed a remarkable variation among the three ceramic compositions of leucite content in the starting unheated ceramic powders ranging between 14 and 32 wt.% and in the respective sintered powders ranging between 15 and 41 wt.% The low fusing glass-ceramic and the high fusing leucite-based ceramic presented significantly higher fracture toughness (p<0.001) and microhardness and lower modulus of elasticity (p<0.05) compared to the low fusing feldspathic ceramic. The three ceramics were almost equivalent concerning their in vitro biological behavior. SIGNIFICANCE: Variations in crystal structure, distribution and composition are related to differences concerning mechanical properties of dental ceramics.

Bactericidal and Bioactive Dental Composites.

Aim: Antimicrobial and bioactive restorative materials are needed to develop a bacteria free environment and tight bond with the surrounding tissue, preventing the spread of secondary caries and thus extending the lifetime of dental restorations. The characteristic properties of new dental bioactive and antibacterial composites are presented in this work. The new composites have been microstructurally characterized and both long and short term properties have been studied. Methods: The Ag-doped sol-gel derived bioactive glass (Ag-BG) was incorporated into resin composite in concentrations 5, 10, and 15 wt.%, to fabricate new Ag-doped bioactive and antibacterial dental composites (Ag-BGCOMP). The microstructural properties and elemental analysis of the developed Ag-BGCOMP was observed. The total bond strength (TBS) was measured immediately and after long term of immersion in medium using microtensile testing. The capability of Ag-BGCOMPs to form apatite layer on their surface after immersion in Simulated Body Fluid (SBF) as well as the bacteria growth inhibition in a biofilm formed by Streptococcus mutans (S. mutans) were evaluated. Results: Homogeneous distribution of Ag-BG particles into the resin composite was observed microstructurally for all Ag-BGCOMPs. The TBS measurements showed non-statistically significant difference between control samples (Ag-BG 0 wt.%) and Ag-BGCOMP specimens. Moreover, the total bond strength between the surrounding tooth tissue and the material of restoration does not present any statistically significant change for all the cases even after 3 months of immersion in the medium. The bioactivity of the Ag-BGCOMPs was also shown by the formation of a calcium-phosphate layer on the surface of the specimens after immersion in SBF. Antibacterial activity was observed for all Ag-BGCOMPs, statistically significant differences were observed between control samples and Ag-BGCOMPs. Accordingly, the number of dead bacteria in the biofilm found to increase significantly with the increase of Ag-BG concentration in the Ag-BGCOMPs. Conclusions: New resin composites with antibacterial and remineralizing properties have been manufactured. Characterization of these materials provides a rationale for future clinical trials to evaluate clinical benefits and outcomes in comparison with currently used dental materials. Significance: The new developed composites could ultimately prevent restoration failure and could advance patients' wellbeing.