Capture of a single molecule in a nanocavity.

We describe a heptameric protein pore that has been engineered to accommodate two different cyclodextrin adapters simultaneously within the lumen of a transmembrane beta barrel. The volume between the adapters is a cavity of approximately 4400 cubic angstroms. Analysis of single-channel recordings reveals that individual charged organic molecules can be pulled into the cavity by an electrical potential. Once trapped, an organic molecule shuttles back and forth between the adapters for hundreds of milliseconds. Such self-assembling nanostructures are of interest for the fabrication of multianalyte sensors and could provide a means to control chemical reactions.

Structure of staphylococcal alpha-hemolysin, a heptameric transmembrane pore.

The structure of the Staphylococcus aureus alpha-hemolysin pore has been determined to 1.9 A resolution. Contained within the mushroom-shaped homo-oligomeric heptamer is a solvent-filled channel, 100 A in length, that runs along the sevenfold axis and ranges from 14 A to 46 A in diameter. The lytic, transmembrane domain comprises the lower half of a 14-strand antiparallel beta barrel, to which each protomer contributes two beta strands, each 65 A long. The interior of the beta barrel is primarily hydrophilic, and the exterior has a hydrophobic belt 28 A wide. The structure proves the heptameric subunit stoichiometry of the alpha-hemolysin oligomer, shows that a glycine-rich and solvent-exposed region of a water-soluble protein can self-assemble to form a transmembrane pore of defined structure, and provides insight into the principles of membrane interaction and transport activity of beta barrel pore-forming toxins.

A regulatory subunit of the cAMP-dependent protein kinase down-regulated in aplysia sensory neurons during long-term sensitization.

Binding of cAMP by the five neuronal isoforms (N1-5) of the regulatory (R) subunit of the Aplysia cAMP-dependent protein kinase is diminished in sensory neurons stimulated to produce long-term presynaptic facilitation. To determine how the cAMP-binding activity of the R subunits is lost, we isolated cDNAs encoding N4, which is a homolog of mammalian RI. Immunoblots with antisera raised against the R protein overexpressed in E. coli show that the diminished binding activity, which occurs in long-term facilitation, results from coordinate loss of R protein isoforms. No change was detected in the amount of transcripts for R subunits, suggesting that the down-regulation results from enhanced proteolytic turnover.

Nonmuscle and muscle tropomyosin isoforms are expressed from a single gene by alternative RNA splicing and polyadenylation.

The molecular basis for the expression of rat embryonic fibroblast tropomyosin 1 and skeletal muscle beta-tropomyosin was determined. cDNA clones encoding these tropomyosin isoforms exhibit complete identity except for two carboxy-proximal regions (amino acids 189 to 213 and 258 to 284) and different 3'-untranslated sequences. The isoform-specific regions delineate the troponin T-binding domains of skeletal muscle tropomyosin. Analysis of genomic clones indicates that there are two separate loci in the rat genome that contain sequences complementary to these mRNAs. One locus is a pseudogene. The other locus contains a single gene made up of 11 exons and spans approximately 10 kilobases. Sequences common to all mRNAs were found in exons 1 through 5 (amino acids 1 to 188) and exons 8 and 9 (amino acids 214 to 257). Exons 6 and 11 are specific for fibroblast mRNA (amino acids 189 to 213 and 258 to 284, respectively), while exons 7 and 10 are specific for skeletal muscle mRNA (amino acids 189 to 213 and 258 to 284, respectively). In addition, exons 10 and 11 each contain the entire 3'-untranslated sequences of the respective mRNAs including the polyadenylation site. Although the gene is also expressed in smooth muscle (stomach, uterus, and vas deferens), only the fibroblast-type splice products can be detected in these tissues. S1 and primer extension analyses indicate that all mRNAs expressed from this gene are transcribed from a single promoter. The promoter was found to contain G-C-rich sequences, a TATA-like sequence TTTTA, no identifiable CCAAT box, and two putative Sp1-binding sites.

Sequence-specific detection of individual DNA strands using engineered nanopores.

We describe biosensor elements that are capable of identifying individual DNA strands with single-base resolution. Each biosensor element consists of an individual DNA oligonucleotide covalently attached within the lumen of the alpha-hemolysin (alphaHL) pore to form a "DNA-nanopore". The binding of single-stranded DNA (ssDNA) molecules to the tethered DNA strand causes changes in the ionic current flowing through a nanopore. On the basis of DNA duplex lifetimes, the DNA-nanopores are able to discriminate between individual DNA strands up to 30 nucleotides in length differing by a single base substitution. This was exemplified by the detection of a drug resistance-conferring mutation in the reverse transcriptase gene of HIV. In addition, the approach was used to sequence a complete codon in an individual DNA strand tethered to a nanopore.

Tumor protease-activated, pore-forming toxins from a combinatorial library.

We describe a library of two-chain molecular complementation mutants of staphylococcal alpha-hemolysin that features a combinatorial cassette encoding thousands of protease recognition sites in the central pore-forming domain. The cassette is flanked by a peptide extension that inactivates the protein. We screened the library to identify alpha-hemolysins that are highly susceptible to activation by cathepsin B, a protease that is secreted by certain metastatic tumor cells. Toxins obtained by this procedure should be useful for the permeabilization of malignant cells thereby leading directly to cell death or permitting destruction of the cells with drugs that are normally membrane impermeant.

Intracellular trehalose improves the survival of cryopreserved mammalian cells.

We report that the introduction of low concentrations of intracellular trehalose can greatly improve the survival of mammalian cells during cryopreservation. Using a genetically engineered mutant of Staphylococcus aureus alpha-hemolysin to create pores in the cellular membrane, we were able to load trehalose into cells. Low concentrations (0.2 M) of trehalose permitted long-term post-thaw survival of more than 80% of 3T3 fibroblasts and 70% of human keratinocytes. These results indicate that simplified and widely applicable freezing protocols may be possible using sugars as intracellular cryoprotective additives.

Simultaneous stochastic sensing of divalent metal ions.

Stochastic sensing is an emerging analytical technique that relies upon single-molecule detection. Transmembrane pores, into which binding sites for analytes have been placed by genetic engineering, have been developed as stochastic sensing elements. Reversible occupation of an engineered binding site modulates the ionic current passing through a pore in a transmembrane potential and thereby provides both the concentration of an analyte and, through a characteristic signature, its identity. Here, we show that the concentrations of two or more divalent metal ions in solution can be determined simultaneously with a single sensor element. Further, the sensor element can be permanently calibrated without a detailed understanding of the kinetics of interaction of the metal ions with the engineered pore.

Prolonged residence time of a noncovalent molecular adapter, beta-cyclodextrin, within the lumen of mutant alpha-hemolysin pores.

Noncovalent molecular adapters, such as cyclodextrins, act as binding sites for channel blockers when lodged in the lumen of the alpha-hemolysin (alphaHL) pore, thereby offering a basis for the detection of a variety of organic molecules with alphaHL as a sensor element. beta-Cyclodextrin (betaCD) resides in the wild-type alphaHL pore for several hundred microseconds. The residence time can be extended to several milliseconds by the manipulation of pH and transmembrane potential. Here, we describe mutant homoheptameric alphaHL pores that are capable of accommodating betaCD for tens of seconds. The mutants were obtained by site-directed mutagenesis at position 113, which is a residue that lies near a constriction in the lumen of the transmembrane beta barrel, and fall into two classes. Members of the tight-binding class, M113D, M113N, M113V, M113H, M113F and M113Y, bind betaCD approximately 10(4)-fold more avidly than the remaining alphaHL pores, including WT-alphaHL. The lower K(d) values of these mutants are dominated by reduced values of k(off). The major effect of the mutations is most likely a remodeling of the binding site for betaCD in the vicinity of position 113. In addition, there is a smaller voltage-sensitive component of the binding, which is also affected by the residue at 113 and may result from transport of the neutral betaCD molecule by electroosmotic flow. The mutant pores for which the dwell time of betaCD is prolonged can serve as improved components for stochastic sensors.

Location of a constriction in the lumen of a transmembrane pore by targeted covalent attachment of polymer molecules.

Few methods exist for obtaining the internal dimensions of transmembrane pores for which 3-D structures are lacking or for showing that structures determined by crystallography reflect the internal dimensions of pores in lipid bilayers. Several approaches, involving polymer penetration and transport, have revealed limiting diameters for various pores. But, in general, these approaches do not indicate the locations of constrictions in the channel lumen. Here, we combine cysteine mutagenesis and chemical modification with sulfhydryl-reactive polymers to locate the constriction in the lumen of the staphylococcal alpha-hemolysin pore, a model protein of known structure. The rates of reaction of each of four polymeric reagents (MePEG-OPSS) of different masses towards individual single cysteine mutants, comprising a set with cysteines distributed over the length of the lumen of the pore, were determined by macroscopic current recording. The rates for the three larger polymers (1.8, 2.5, and 5.0 kD) were normalized with respect to the rates of reaction with a 1.0-kD polymer for each of the seven positions in the lumen. The rate of reaction of the 5.0-kD polymer dropped dramatically at the centrally located Cys-111 residue and positions distal to Cys-111, whether the reagent was applied from the trans or the cis side of the bilayer. This semi-quantitative analysis sufficed to demonstrate that a constriction is located at the midpoint of the pore lumen, as predicted by the crystal structure, and although the constriction allows a 2.5-kD polymer to pass, transport of a 5.0-kD molecule is greatly restricted. In addition, PEG chains gave greater reductions in pore conductance when covalently attached to the narrower regions of the lumen, permitting further definition of the interior of the pore. The procedures described here should be applicable to other pores and to related structures such as the vestibules of ion channels.

An intermediate in the assembly of a pore-forming protein trapped with a genetically-engineered switch.

BACKGROUND: Studies of the mechanisms by which certain water-soluble proteins can assemble into lipid bilayers are relevant to several areas of biology, including the biosynthesis of membrane and secreted proteins, virus membrane fusion and the action of immune proteins such as complement and perforin. The alpha-hemolysin (alpha HL) protein, an exotoxin secreted by Staphylococcus aureus that forms heptameric pores in lipid bilayers, is a useful model for studying membrane protein assembly. In addition, modified alpha HL might be useful as a component of biosensors or in drug delivery. We have therefore used protein engineering to produce variants of alpha HL that contain molecular triggers and switches with which pore-forming activity can be modulated at will. Previously, we showed that the conductance of pores formed by the mutant hemolysin alpha HL-H5, which contains a Zn(II)-binding pentahistidine sequence, is blocked by Zn(II) from either side of the lipid bilayer, suggesting that residues from the pentahistidine sequence line the lumen of the transmembrane channel. RESULTS: Here we show that Zn(II) can arrest the assembly of alpha HL-H5 before pore formation by preventing an impermeable oligomeric prepore from proceeding to the fully assembled state. The prepore is a heptamer. Limited proteolysis shows that, unlike the functional pore, the prepore contains sites near the amino terminus of the polypeptide chain that are exposed to the aqueous phase. Upon removal of the bound Zn(II) with EDTA, pore formation is completed and the sites near the amino terminus become occluded. Conversion of the prepore to the active pore is the rate-determining step in assembly and cannot be reversed by the subsequent addition of excess Zn(II). CONCLUSIONS: The introduction of a simple Zn(II)-binding motif into a pore-forming protein has allowed the isolation of a defined intermediate in assembly. Genetically-engineered switches for trapping and releasing intermediates that are actuated by metal coordination or other chemistries might be generally useful for analyzing the assembly of membrane proteins and other supramolecular structures.

Designed protein pores as components for biosensors.

BACKGROUND: There is a pressing need for new sensors that can detect a variety of analytes, ranging from simple ions to complex compounds and even microorganisms. The devices should offer sensitivity, speed, reversibility and selectivity. Given these criteria, protein pores, remodeled so that their transmembrane conductances are modulated by the association of specific analytes, are excellent prospects as components of biosensors. RESULTS: Structure-based design and a separation method that employs targeted chemical modification have been used to obtain a heteromeric form of the bacterial pore-forming protein staphylococcal alpha-hemolysin, in which one of the seven subunits contains a binding site for a divalent metal ion, M(II), which serves as a prototypic analyte. The single-channel current of the heteromer in planar bilayers is modulated by nanomolar Zn(II). Other M(II)s modulate the current and produce characteristic signatures. In addition, heteromers containing more than one mutant subunit exhibit distinct responses to M(II)s Hence, a large collection of responsive pores can be generated through subunit diversity and combinatorial assembly. CONCLUSIONS: Engineered pores have several advantages as potential sensor elements: sensitivity is in the nanomolar range; analyte binding is rapid (diffusion limited in some cases) and reversible; strictly selective binding is not required because single-channel recordings are rich in information; and for a particular analyte, the dissociation rate constant, the extent of channel block and the voltage-dependence of these parameters are distinguishing, while the frequency of partial channel block reflects the analyte concentration. A single sensor element might, therefore, be used to quantitate more than one analyte at once. The approach described here can be generalized for additional analytes.

A functional protein pore with a "retro" transmembrane domain.

Extended retro (reversed) peptide sequences have not previously been accommodated within functional proteins. Here, we show that the entire transmembrane portion of the beta-barrel of the pore-forming protein alpha-hemolysin can be formed by retrosequences comprising a total of 175 amino acid residues, 25 contributed by the central sequence of each subunit of the heptameric pore. The properties of wild-type and retro heptamers in planar bilayers are similar. The single-channel conductance of the retro pore is 15% less than that of the wild-type heptamer and its current-voltage relationship denotes close to ohmic behavior, while the wild-type pore is weakly rectifying. Both wild-type and retro pores are very weakly anion selective. These results and the examination of molecular models suggest that beta-barrels may be especially accepting of retro sequences compared to other protein folds. Indeed, the ability to form a retro domain could be diagnostic of a beta-barrel, explaining, for example, the activity of the retro forms of many membrane-permeabilizing peptides. By contrast with the wild-type subunits, monomeric retro subunits undergo premature assembly in the absence of membranes, most likely because the altered central sequence fails to interact with the remainder of the subunit, thereby initiating assembly. Despite this difficulty, a technique was devised for obtaining heteromeric pores containing both wild-type and retro subunits. Most probably as a consequence of unfavorable interstrand side-chain interactions, the heteromeric pores are less stable than either the wild-type or retro homoheptamers, as judged by the presence of subconductance states in single-channel recordings. Knowledge about the extraordinary plasticity of the transmembrane beta-barrel of alpha-hemolysin will be very useful in the de novo design of functional membrane proteins based on the beta-barrel motif.

Heptameric structures of two alpha-hemolysin mutants imaged with in situ atomic force microscopy.

Atomic force microscopy has been used to study self-assembled structures of two alpha-hemolysin mutants. For a mutant (alphaHL-H5) that was locked into the prepore state on fluid phase egg-PC membranes, we visualized, for the first time, heptameric prepores and showed that the 7-fold axis in the prepore lies perpendicular to the membrane surface. For another mutant (TCM) with the transmembrane domain, the self-assembled oligomer that assumes the conformation of the fully assembled pore is also a heptamer. These results show that heptamers are the preferred oligomerization state of alpha-hemolysin.

A reproducible microanalytical method for the detection of specific RNA sequences by dot-blot hybridization.

A rapid, microanalytical procedure for the reproducible isolation of RNA from small cultured cell samples and application to dot-blot hybridization is described. The procedure employs guanidine hydrochloride solubilization of whole cells, disruption by syringing, and selective precipitation of RNA with ethanol. The method can be performed in a single tissue culture tube and obviates the need for removal of nuclei or for organic solvent extractions. Recovery of RNA from small cell samples (10(6) cells) is 51%, while 97% of the DNA and 99% of the protein are eliminated by the procedure. Detection of specific RNA by dot-blot hybridization using a labeled probe demonstrates high reproducibility of recovered RNA and lack of "masking" with up to a 10-fold excess of starting cell material. Applicability of the procedure to detection of virus-specific RNA in cells persistently infected with mouse hepatitis virus is described.

Kinetics and regulation of two catalytic subunits of cAMP-dependent protein kinase from Aplysia californica.

CAPL-A1 and CAPL-A2, two catalytic subunits of Aplysia cAMP-dependent protein kinase, are encoded by mRNAs generated by alternative splicing of transcripts of a gene that contains two mutually exclusive exon cassettes. The subunits are identical except for amino acids 142-183 of the 352 residues, which differ at 10 of 42 positions. CAPL-A1 and CAPL-A2 have now been expressed in insect cells and purified to homogeneity. The subunits differ in their catalytic properties, which have been determined with a series of synthetic peptide substrates. For example, kcat and Km values for the peptide LRRASLG (kemptide) are 42 s-1 and 36 microM and 28 s-1 and 17 microM for CAPL-A1 and CAPL-A2, respectively. CAPL-A1 and CAPL-A2 have different substrate specificities. For example, (kcat/Km)peptide-T/(kcat/Km)kemptide is 9.1 x 10(-3) for CAPL-A1 and 15 x 10(-3) for CAPL-A2, where peptide-T is the kemptide homologue LRRATLG. The subunits also differ in regulation as determined by their interactions with a purified type I regulatory subunit, which has an IC50 for CAPL-A1 that is 3.5 times higher than the IC50 for CAPL-A2. These modest differences reinforce accumulating evidence that the physiological state of a cell depends upon a spectrum of protein kinases with overlapping substrate specificities and regulatory properties.

Cellular synthesis and modification of murine hepatitis virus polypeptides.

Mouse L fibroblasts infected with mouse hepatitis virus, MHV3, and radiolabelled with 35S-methionine, contained, in addition to the three major structural polypeptides, p24, p56 and p180, two additional ones, p22 and p50. Of these total five polypeptides, only three, p22, p56 and p180, were labelled in infected cells during a 2 min 35S-methionine pulse and are, therefore, presumed to be immediate translation products. Pulse-chases and chymotryptic peptide mapping experiments showed apparent precursor-product relationships between p56 and p50 and between p22 and p24. Protein synthesis in infected cells was synchronized at the initiation stage by pre-exposure to hypertonic medium. Using a 0.5 min pulse-10 min chase sequence, to limit incorporation of 35S-methionine to stretches of approx. 100 amino acids adjacent to translational initiation sites, it was found that all three polypeptides, p22, and p56 and p180 contained radiolabel. It is thus apparent that translation of the three major structural proteins (or precursors) is initiated independently rather than at a single site as in the cases of other positive-strand RNA viruses such as polio or Semliki Forest virus.

Attenuation of murine coronavirus infection by ammonium chloride.

Ammonium chloride at a concentration of 20 mM delayed by 4-5 hr the production of virus progeny in mouse L-2 cells infected at high multiplicity with mouse hepatitis virus (MHV). This delay was seen in the production of both intracellular and extracellular virus. However, the final titers were similar to those produced by MHV-infected cells maintained in normal medium. The manifestation of virus-induced cell fusion was similarly found to be delayed, but not otherwise decreased in severity, when ammonium chloride was present in the culture medium. Ammonium chloride caused similar delays in production of virus-specific, positive-sense RNAs and of viral polypeptides. The relative proportions and apparent molecular weights of viral RNAs and polypeptides were similar to those found in MHV-infected cells cultured in normal medium. In vitro translation of endogenously produced viral RNAs in cell extracts, prepared from MHV-infected cells, was not inhibited by ammonium chloride. Thus, ammonium chloride has no specific, inhibitory effect on viral protein synthesis. Ammonium chloride did not reduce the number of virus-infected cells in culture, as monitored by infectious center assay. Analysis of early events in MHV infection showed that ammonium chloride did not affect adsorption or internalization of MHV by L-2 cells. However, the subsequent eclipse phase, as monitored by decline in infectivity of internalized virus inoculum proceeded less efficiently in the presence of ammonium chloride. On the basis of the known inhibitory effects of ammonium chloride on lysosomal/endosomal functions, the results suggest an endosomal mechanism of MHV uncoating. Thus the primary effect of ammonium chloride on MHV infection of L-2 cells is to attenuate virus uncoating, thereby chronologically displacing all subsequent virus-encoded functions.