Dual strategy involving hospital-based study and community-based screening to eliminate hepatitis C in remote areas.

BACKGROUND: /Purpose: To achieve the World Health Organization goal of eliminating viral hepatitis by 2030, a key strategy in resource-limited areas is to identify the areas with high prevalence and to prioritize screening and treatment intervention. We hypothesized that a hospital-based laboratory database could be used to estimate the township- and village-specific anti-hepatitis C virus (HCV) prevalence. METHODS: Yunlin County Public Health Bureau has been collecting anti-HCV test data from eight major hospitals. Township- and village-specific screening testing rates and anti-HCV prevalence were calculated for residents 40 years or older. A township with a wide range of anti-HCV prevalence rates was selected for outreach universal screening and for validating the village-specific prevalence of anti-HCV in the analysis of the data from the hospitals. RESULTS: The overall anti-HCV screening testing rate in Yunlin County was 30.4 %, whereas the anti-HCV prevalence rate for persons 40 years or older was 15.4 %. The village-specific anti-HCV prevalence rates ranged from 3.8 % to 85.8 %. Community-based screening was conducted in Kouhu Township. The village-specific anti-HCV prevalence rates ranged from 0 % to 18.8 %. Three of the four villages had the highest village-specific anti-HCV prevalence in the community-based study and the hospital-based study. Additionally, 95.8 % of the new HCV cases detected by universal screening received anti-HCV therapy. CONCLUSION: The hospital-based database provided a framework for identifying the villages with high anti-HCV prevalence. Additionally, community-based universal screening should be prioritized for villages with high prevalence in hospital-based databases.

Highly Efficient MAPbI3 -Based Quantum Dots Exhibiting Unusual Nonblinking Single Photon Emission at Room Temperature.

Highly emissive semiconductor nanocrystals, or so-called quantum dots (QDs) possess a variety of applications from displays and biology labeling, to quantum communication and modern security. Though ensembles of QDs have already shown very high photoluminescent quantum yields (PLQYs) and have been widely utilized in current optoelectronic products, QDs that exhibit high absorption cross-section, high emission intensity, and, most important, nonblinking behavior at single-dot level have long been desired and not yet realized at room temperature. In this work, infrared-emissive MAPbI3 -based halide perovskite QDs is demonstrated. These QDs not only show a ≈100% PLQY at the ensemble level but also, surprisingly, at the single-dot level, display an extra-large absorption cross-section up to 1.80 × 10-12 cm2 and non-blinking single photon emission with a high single photon purity of 95.3%, a unique property that is extremely rare among all types of quantum emitters operated at room temperature. An in-depth analysis indicates that neither trion formation nor band-edge carrier trapping is observed in MAPbI3 QDs, resulting in the suppression of intensity blinking and lifetime blinking. Fluence-dependent transient absorption measurements reveal that the coexistence of non-blinking behavior and high single photon purity in these perovskite QDs results from a significant repulsive exciton-exciton interaction, which suppresses the formation of biexciton, and thus greatly reduces photocharging. The robustness of these QDs is confirmed by their excellent stability under continuous 1 h electron irradiation in high-resolution transmission electron microscope inspection. It is believed that these results mark an important milestone in realizing nonblinking single photon emission in semiconductor QDs.

Involvement of free-space optics in Raman distributed temperature sensing.

This Letter demonstrates the successful use of free-space optics (FSO) as a transition channel for an air segment in transmitting Raman backscattering signals for distributed temperature sensing (DTS). A barrier-free air segment link shaped by an FSO is part of the Raman-based DTS (RDTS) fiber optic transmission route. For this plan, the FSO enables delivery of the RDTS's pulse with the low-loss transmission over the air segment while also returning to the RDTS the varied Raman backscattered signals from the probing temperature variations for signal interpretation. The difference between various temperatures sensed and the referential air temperature remains nearly the same before and after passing the FSO. The viability of this technology provides a crucial basis for tackling the high expense of installing and repairing DTS cables and the challenges associated with doing so owing to topographical restrictions.

Insulin-Like Growth Factor 2 mRNA-Binding Protein 1 (IGF2BP1) Is a Prognostic Biomarker and Associated with Chemotherapy Responsiveness in Colorectal Cancer.

Insulin-like growth factor 2 mRNA-binding protein 1 (IGF2BP1) is an RNA-binding protein and serves as a post-transcriptional fine-tuner regulating the expression of mRNA targets. However, the clinicopathological roles of IGF2BP1 in colorectal cancer (CRC) remains limited. Thus, we aimed to elucidate the clinical significance and biomarker potentials of IGF2BP1 in CRC. A total of 266 specimens from two sets of CRC patients were collected. IGF2BP1 expression was studied by immunohistochemical (IHC) staining. The Kaplan-Meier survival plot and a log-rank test were used for survival analysis. The Cox proportional hazards model was applied to determine the survival impact of IGF2BP1. Public datasets sets from The Cancer Genome Atlas (TCGA) and Human Cancer Metastasis Database (HCMDB), receiver operating characteristic (ROC) plotter, and two CRC cell lines, HCT-116 and DLD-1, were used for validating our findings. We showed that IGF2BP1 was overexpressed in tumor specimens compared to 13 paired normal parts by examining the immunoreactivity of IGF2BP1 (p = 0.045). The increased expression of IGF2BP1 in primary tumor parts was observed regardless of metastatic status (p < 0.001) in HCMDB analysis. IGF2BP1 expression was significantly associated with young age (59.6% vs. 46.7%, p-value = 0.043) and advanced stage (61.3% vs. 40.0%, p-value = 0.001). After controlling for confounding factors, IGF2BP1 remained an independent prognostic factor (HR = 1.705, p-value = 0.005). TCGA datasets analysis indicated that high IGF2BP1 expression showed a lower 5-year survival rate (58% vs. 65%) in CRC patients. The increased expression of IGF2BP1 in chemotherapy non-responder rectal cancer patients was observed using a ROC plotter. Overexpression of IGF2BP1 promoted the colony-forming capacity and 5-fluorouracil and etoposide resistance in CRC cells. Here, IGF2BP1 was an independent poor prognostic marker in CRC patients and contributed to aggressive phenotypes in CRC cell lines.

Application of an interspinous process device after minimally invasive lumbar decompression could lead to stress redistribution at the pars interarticularis: a finite element analysis.

BACKGROUND: An interspinous process device, the Device for Intervertebral Assisted Motion (DIAM™) designed to treat lumbar neurogenic disease secondary to the lumbar spinal stenosis, it provides dynamic stabilization after minimally invasive (MI) lumbar decompression. The current study was conducted using an experimentally validated L1-L5 spinal finite element model (FEM) to evaluate the limited decompression on range of motion (ROM) and stress distribution on a neural arch implanted with the DIAM. METHODS: The study simulated bilateral laminotomies with partial discectomy at L3-L4, as well as unilateral and bilateral laminotomies with partial discectomy combined with implementation of the DIAM at L3-L4. The ROM and maximum von Mises stresses in flexion, extension, lateral bending, and axial torsion were analyzed in response to the hybrid protocol in comparison with the intact model. RESULTS: The investigation revealed that decreased ROM, intradiscal stress, and facet joint force at the implant level, but considerably increased stress at the pars interarticularis were found during flexion and torsion at the L4, as well as during extension, lateral bending, and torsion at the L3, when the DIAM was implanted compared with the defect model. CONCLUSION: The results demonstrate that the DIAM may be beneficial in reducing the symptoms of stress-induced low back pain. Nevertheless, the results also suggest that a surgeon should be cognizant of the stress redistribution at the pars interarticularis results from MI decompression plus the application of the interspinous process device.

Sequentially surface modified hematite enables lower applied bias photoelectrochemical water splitting.

Hematite (α-Fe2O3) is a suitable candidate for photoelectrochemical water splitting due to its well-suited band structure, stability, and availability. However, water splitting using a low external potential is the major challenge that limits the practical application of hematite. Here, we achieve a very low onset potential using a sequential surface treatment approach to overcome two fundamental limiting factors, sluggish hole transfer, and interfacial recombination, independently. First, a heavily doped Fe2-xSnxO3 surface passivation layer was created by Sn4+ surface treatment which can robustly inhibit interfacial recombination. Then, an NiOOH catalyst layer was deposited that greatly enhances the charge transfer process across the passivated electrode/electrolyte interface. By exploiting this approach, the optimized sequentially treated photoanode (Fe2O3/Fe2-xSnxO3/NiOOH) exhibits a low photocurrent onset potential of 0.49 V vs. RHE and a saturated photocurrent density of 2.4 mA cm-2 V at 1.5 V vs. RHE. Transient photocurrent and impedance spectroscopy measurements further reveal that the combined Fe2-xSnxO3/NiOOH layers reduce interfacial recombination and enhance charge transfer across the electrode/electrolyte interface. The results provide convincing evidence that it is possible to address the problems of surface trap recombination and sluggish catalysis independently by employing surface passivation layers first and catalysts later sequentially.

Genetic and pathogenic difference between Streptococcus agalactiae serotype Ia fish and human isolates.

BACKGROUND: Streptococcus agalactiae (GBS) is a common pathogen to infect newborn, woman, the elderly, and immuno-compromised human and fish. 37 fish isolates and 554 human isolates of the GBS in 2007-2012 were investigated in serotypes, antibiotic susceptibility, genetic difference and pathogenicity to tilapia. RESULTS: PCR serotyping determined serotype Ia for all fish GBS isolates and only in 3.2 % (3-4.2 %) human isolates. For fish isolates, all consisted a plasmid less than 6 kb and belonged to ST7 type, which includes mainly pulsotypes I and Ia, with a difference in a deletion at the largest DNA fragment. These fish isolates were susceptible to all antimicrobials tested in 2007 and increased in non-susceptibility to penicillin, and resistance to clindamycin and ceftriaxone in 2011. Differing in pulsotype and lacking plasmid from fish isolates, human serotype Ia isolates were separated into eight pulsotypes II-IX. Main clone ST23 included pulsotypes II and IIa (50 %) and ST483 consisted of pulsotype III. Human serotype Ia isolates were all susceptible to ceftriaxone and penicillin and few were resistant to erythromycin, azithromycin, clindamycin, levofloxacin and moxifloxacine with the resistant rate of 20 % or less. Using tilapia to analyze the pathogenesis, fish isolates could cause more severe symptoms, including hemorrhage of the pectoral fin, hemorrhage of the gill, and viscous black and common scites, and mortality (>95 % for pulsotype I) than the human isolates (<30 %); however, the fish pulostype Ia isolate 912 with deletion caused less symptoms and the lowest mortality (<50 %) than pulsotype I isolates. CONCLUSION: Genetic, pathogenic, and antimicrobial differences demonstrate diverse origin of human and fish serotype Ia isolates. The pulsotype Ia of fish serotype Ia isolates may be used as vaccine strains to prevent the GBS infection in fish.

Pure, single crystal Ge nanodots formed using a sandwich structure via pulsed UV excimer laser annealing.

In this paper, a sandwich structure comprising a SiO2 capping layer, amorphous Germanium (a-Ge) nanodots (NDs), and a pit-patterned Silicon (Si) substrate is developed, which is then annealed by utilizing a pulsed ultraviolet excimer laser in order to fabricate an array of pure, single crystal Ge NDs at room temperature. A wide bandgap SiO2 capping layer is used as a transparent thermally isolated layer to prevent thermal loss and Si-Ge intermixing. The two-dimensional pit-patterned Si substrate is designed to confine the absorbed laser energy, reduce the melting point, and block the surface migration of the Ge. After optimizing the laser radiation parameters such that the laser energy density is 200 mJ cm(-2), the laser annealing period is 10 s, and the number of laser shots is 10, pure, single crystal Ge NDs that have both a regular arrangement and a uniform size distribution are obtained in the pits of the Si substrates. The Raman spectrum shows a highly symmetric Ge transversal optical peak with a full width at half maximum of 4.2 cm(-1) at 300.7 cm(-1), which is close to that of the original Ge wafer. In addition, the high-resolution transmission electron microscopy image for the Ge NDs and the corresponding selected area electron diffraction pattern shows a clear single crystalline structure without any impurities.

Effect of surface Si redistribution on the alignment of Ge dots grown on pit-patterned Si(001) substrates.

Thermally activated redistribution of Si surface atoms is found to be a crucial factor for the growth of aligned Ge dots on pit-patterned Si(001) substrates. A phenomenon of Si accumulation around the edge of pits significantly alters the substrate surface morphology. As the pit spacing is reduced to below 100 nm, a convex morphology developed between adjacent pits causes a chemical potential distribution that drives the Ge dots into the pits. In addition, the pits of an etching depth greater than 60 nm will evolve into truncated inverted pyramids with sharp base corners that provide deep potential wells for the confinement of Ge dots. Perfectly aligned Ge dots are obtained on pit-patterned Si substrates with this range of pit spacing and etching depth. We also find that the initial geometric shape of the pits does not affect the spatial arrangement of Ge dots.

Performance evaluation of continuity of care records (CCRs): parsing models in a mobile health management system.

In a mobile health management system, mobile devices act as the application hosting devices for personal health records (PHRs) and the healthcare servers construct to exchange and analyze PHRs. One of the most popular PHR standards is continuity of care record (CCR). The CCR is expressed in XML formats. However, parsing is an expensive operation that can degrade XML processing performance. Hence, the objective of this study was to identify different operational and performance characteristics for those CCR parsing models including the XML DOM parser, the SAX parser, the PULL parser, and the JSON parser with regard to JSON data converted from XML-based CCR. Thus, developers can make sensible choices for their target PHR applications to parse CCRs when using mobile devices or servers with different system resources. Furthermore, the simulation experiments of four case studies are conducted to compare the parsing performance on Android mobile devices and the server with large quantities of CCR data.

Developing a Cost-Effective Surgical Scheduling System Applying Lean Thinking and Toyota's Methods for Surgery-Related Big Data for Improved Data Use in Hospitals: User-Centered Design Approach.

BACKGROUND: Surgical scheduling is pivotal in managing daily surgical sequences, impacting patient experience and hospital resources significantly. With operating rooms costing approximately US $36 per minute, efficient scheduling is vital. However, global practices in surgical scheduling vary, largely due to challenges in predicting individual surgeon times for diverse patient conditions. Inspired by the Toyota Production System's efficiency in addressing similar logistical challenges, we applied its principles as detailed in the book "Lean Thinking" by Womack and Jones, which identifies processes that do not meet customer needs as wasteful. This insight is critical in health care, where waste can compromise patient safety and medical quality. OBJECTIVE: This study aims to use lean thinking and Toyota methods to develop a more efficient surgical scheduling system that better aligns with user needs without additional financial burdens. METHODS: We implemented the 5 principles of the Toyota system: specifying value, identifying the value stream, enabling flow, establishing pull, and pursuing perfection. Value was defined in terms of meeting the customer's needs, which in this context involved developing a responsive and efficient scheduling system. Our approach included 2 subsystems: one handling presurgery patient data and another for intraoperative and postoperative data. We identified inefficiencies in the presurgery data subsystem and responded by creating a comprehensive value stream map of the surgical process. We developed 2 Excel (Microsoft Corporation) macros using Visual Basic for Applications. The first calculated average surgery times from intra- or postoperative historic data, while the second estimated surgery durations and generated concise, visually engaging scheduling reports from presurgery data. We assessed the effectiveness of the new system by comparing task completion times and user satisfaction between the old and new systems. RESULTS: The implementation of the revised scheduling system significantly reduced the overall scheduling time from 301 seconds to 261 seconds (P=.02), with significant time reductions in the revised process from 99 seconds to 62 seconds (P<.001). Despite these improvements, approximately 21% of nurses preferred the older system for its familiarity. The new system protects patient data privacy and streamlines schedule dissemination through a secure LINE group (LY Corp), ensuring seamless flow. The design of the system allows for real-time updates and has been effectively monitoring surgical durations daily for over 3 years. The "pull" principle was demonstrated when an unplanned software issue prompted immediate, user-led troubleshooting, enhancing system reliability. Continuous improvement efforts are ongoing, except for the preoperative patient confirmation step, which requires further enhancement to ensure optimal patient safety. CONCLUSIONS: Lean principles and Toyota's methods, combined with computer programming, can revitalize surgical scheduling processes. They offer effective solutions for surgical scheduling challenges and enable the creation of a novel surgical scheduling system without incurring additional costs.

Systematic designs of single metal compounds synthesized using ammonia fluoride-based complex as structure directing agents for energy storage.

Tailoring morphology and composition of metal organic frameworks (MOF) can improve energy storage by establishing high surface area, large porosity and multiple redox states. Structure directing agents (SDA) is functional of designing surface properties of electroactive materials. Ammonium fluoride has functional abilities for designing MOF derivatives with excellent energy storage abilities. Systematic design of MOF derivatives using ammonia fluoride-based complex as SDA can essentially create efficient electroactive materials. Metal species can also play significant roles on redox reactions, which are the main energy storage mechanism for battery-type electrodes. In this work, 2-methylimidazole, two novel SDAs of NH4BF4 and NH4HF2, and six metal species of Al, Mn, Co, Ni, Cu and Zn are coupled to synthesize MOF derivatives for energy storage. Metal species-dependent compositions including hydroxides, oxides, and hydroxide nitrates are observed. The nickel-based derivative (Ni-HBF) shows the highest specific capacitance (CF) of 698.0F/g at 20 mV/s, due to multiple redox states and advanced flower-like surface properties. The diffusion and capacitive-control contributions of MOF derivatives are also analyzed. The battery supercapacitor hybrid with Ni-HBF electrode shows a maximum energy density of 27.9 Wh/kg at 325 W/kg. The CF retention of 170.9% and Coulombic efficiency of 93.2% are achieved after 10,000 cycles.

Thermally induced morphology evolution of pit-patterned Si substrate and its effect on nucleation properties of Ge dots.

We demonstrate the effect of the pre-growth heat treatment process on the nucleation properties of Ge dots grown on pit-patterned Si(001) substrates. The prefabricated 200 nm diameter pits inherently evolve into truncated inverted pyramids (TIPs) with (110) base edges and a 7°-9° sidewall slope during heat treatment; this morphology transformation is robust against variations in shape and orientation of the pit patterns. Uniform Ge dots with an areal density of 4 × 10(9) cm(-2) were obtained on the Si substrates having TIPs. Each TIP contains four aligned Ge dots locating symmetrically with respect to (110). These dots exhibit an elliptical dome shape with major axis oriented along (100). The nucleation position, shape and spatial orientation of these Ge dots coincide with the calculated surface chemical potential distribution of the TIP.

Applying the Toyota production system to decrease the time required to transport patients undergoing surgery from the general ward to the operating room and reviewing the essence of lean thinking.

Background: Sending a patient to the operating room is the first step in surgery. Delayed patient transport causes the patient to go hungry for a longer time, aggravating the patient's physical discomfort and psychological stress. The issue of delays in transporting inpatients to the operating room has rarely been discussed in the literature. The Toyota production system is a famous and excellent scientific method of reducing waste and increasing efficiency. Our goal is to use the Toyota method to decrease the time required to transport the inpatient to the operating room and to review the concepts underlying lean thinking. Methods: We employed an A3 8-step problem-solving process. A current value stream map featuring numerical data (concerning 46 patients) measured in the workplace was developed. The total time spent on transport was 53 min, but we expected patients to be transported within 30 min. We hoped to reduce the time wasted by half, i.e., by 23*50% = 12 min. These 12 min were saved by reducing the time spent on "waiting for an attendant at the ward" by 9 min and the time spent on "elevator transport" by 3 min. According to the value stream map featuring the time measurements, the root causes of delayed transportation can be divided into process-related, attendant-related, and elevator-related factors. We formulated 5 countermeasures. The ECRS (Eliminate, Combine, Rearrange, Simplify) technique was used to rearrange, combine, and simplify the existing process. Hospital executives established norms for attendant prioritization of work and rules for elevator use. Results: According to the original indicators, all goals were attained. "Total time spent" decreased by 62.3%. The time required for attendants to report to the nursing station decreased by 56.5%. The time spent on elevator transport decreased by 44.4%. We developed a process for future use based on information-assisted patient and staff identification. Finally, we standardized successful processes. Conclusion: The seemingly trivial factors that delay patient transport are associated with seven types of waste. The A3 8-step problem-solving process is useful in this context. In proposing this improvement process, we believe that we are following the spirit of the Toyota production system.

Investigation of the Relationship between Lean Muscle Mass and Erythropoietin Resistance in Maintenance Haemodialysis Patients: A Cross-Sectional Study.

Each patient undergoing maintenance haemodialysis (MHD) has a different response to erythropoiesis-stimulating agents (ESAs). Haemodilution due to fluid overload has been shown to contribute to anaemia. Body mass index (BMI) has been shown to influence ESA response in dialysis patients; however, BMI calculation does not distinguish between fat and lean tissue. The association between lean muscle mass and erythropoietin hyporesponsiveness is still not well-known among MHD patients. We designed a cross-sectional study and used bioimpedance spectroscopy (BIS) to analyse the relationship between body composition, haemoglobin level, and erythropoietin resistance index (ERI) in MHD patients. Seventy-seven patients were enrolled in the study group. Compared with patients with haemoglobin ≥ 10 g/dL, those with haemoglobin < 10 g/dL had higher serum ferritin levels, malnutrition−inflammation scores (MIS), relative overhydration, ESA doses, and ERIs. In multivariate logistic regression, higher ferritin levels and MIS were the only predictors of lower haemoglobin levels. The ERI was significantly positively correlated with age, Kt/V, ferritin levels, and MIS and negatively correlated with albumin levels, BMI, and lean tissue index (LTI). Multivariate linear regression analysis revealed that ferritin levels, BMI, and LTI were the most important predictors of ERI. In MHD patients, using BIS to measure body composition can facilitate the development of early interventions that aim to prevent sarcopenia, support ESA responsiveness, and, consequently, improve anaemia management.

Comparison of Highly Intensive Home-Based Post-acute Care to Inpatient Program for Patients With Fragility Fractures After Surgery.

Introduction: Evidence suggests that patients with fragility fractures would benefit from post-acute care (PAC); however, they have been subjected to varying PAC programs. This study aimed to compare the effectiveness of home-based PAC (HPAC) to inpatient PAC (IPAC) programs for patients with fragility fractures in Taiwan. Materials and methods: This is a retrospective study that reviewed the medical records of patients who received HPAC or IPAC within three weeks after hip, knee, or spine fragility fractures in the Taipei City Hospital from September 1, 2017, to August 31, 2018. Results: The mean age (78.9 ± 10.8 years) showed significant difference between the HPAC (age = 80.6 ± 11.1, n = 83) and the IPAC (age = 78.2 ± 10.6, n = 185) groups (P = .049). After PAC, both HPAC and IPAC groups showed improvement on Barthel index, numerical pain rating scale, and Harris hip score (all P < .001). Patients in the HPAC group displayed greater improvement than the IPAC group on Barthel Index for activities of daily living (ADLs) by 5.8 (95% confidence interval, 3.0 to 8.5). The IPAC group had a significant longer length of PAC than the HPAC group (12.4 ± 3.0 vs. 11.1 ± 2.7, P < .001). Conclusion: Both PAC programs could significantly improve functional performance and reduce pain in patients with fragility fractures. Patients treated in the HPAC group had better ADLs, and less length of PAC.

Pan-Genotypic Direct-Acting Antiviral Agents for Undetermined or Mixed-Genotype Hepatitis C Infection: A Real-World Multi-Center Effectiveness Analysis.

Although the pan-genotypic direct-acting antiviral regimen was approved for treating chronic hepatitis C infection regardless of the hepatitis C virus (HCV) genotype, real-world data on its effectiveness against mixed-genotype or genotype-undetermined HCV infection are scarce. We evaluated the real-world safety and efficacy of two pan-genotypic regimens (Glecaprevir/Pibrentasvir and Sofosbuvir/Velpatasvir) for HCV-infected patients with mixed or undetermined HCV genotypes from the five hospitals in the Changhua Christian Care System that commenced treatment between August 2018 and December 2020. This retrospective study evaluated the efficacy and safety of pan-genotypic direct-acting antiviral (DAA) treatment in adults with HCV infection. The primary endpoint was the sustained virological response (SVR) observed 12 weeks after completing the treatment. Altogether, 2446 HCV-infected patients received the pan-genotypic DAA regimen, 37 (1.5%) patients had mixed-genotype HCV infections and 110 (4.5%) patients had undetermined HCV genotypes. The mean age was 63 years and 55.8% of our participants were males. Nine (6.1%) patients had end-stage renal disease and three (2%) had co-existing hepatomas. We lost one patient to follow-up during treatment and one more patient after treatment. A total of four patients died. However, none of these losses were due to treatment-related side effects. The rates of SVR12 for mixed-genotype and genotype-undetermined infections were 97.1% and 96.2%, respectively, by per-protocol analyses, and 91.9% and 92.7% respectively, by intention-to-treat population analyses. Laboratory adverse events with grades ≥3 included anemia (2.5%), thrombocytopenia (2.5%), and jaundice (0.7%). Pan-genotypic DAAs are effective and well-tolerated for mixed-genotype or genotype-undetermined HCV infection real-world settings.

Controlled synthesis of CdSe quantum dots by a microwave-enhanced process: a green approach for mass production.

A method that does not employ hot-injection techniques has been developed for the size-tunable synthesis of high-quality CdSe quantum dots (QDs) with zinc blende structure. In this environmentally benign synthetic route, which uses less toxic precursors, solvents, and capping ligands, CdSe QDs that absorb visible light are obtained. The size of the as-prepared CdSe QDs and thus their optical properties can be manipulated by changing the microwave reaction conditions. The QDs were characterized by XRD, TEM, UV/Vis, FTIR, time-resolved fluorescence spectroscopy, and fluorescence spectrophotometry. In this approach, the reaction is conducted in open air and at a much lower temperature than in hot-injection techniques. The use of microwaves in this process allows for a highly reproducible and effective synthesis protocol that is fully adaptable for mass production and can be easily employed to synthesize a variety of semiconductor QDs with the desired properties. Possible applications of the CdSe QDs were assessed by deposition on TiO(2) films.

Preventive Healthcare and Management for Acute Lymphoblastic Leukaemia in Adults: Case Report and Literature Review.

Acute lymphoblastic leukaemia (ALL) is diagnosed by the presence of at least 20% lymphoblasts in the bone marrow. ALL may be aggressive and include the lymph nodes, liver, spleen, central nervous system (CNS), and other organs. Without early recognition and timely treatment, ALL will progress quickly and may have poor prognosis in clinical scenarios. ALL is a rare type of leukaemia in adults but is the most common type in children. Precipitating factors such as environmental radiation or chemical exposure, viral infection, and genetic factors can be associated with ALL. We report a rare case of ALL with symptomatic hypercalcaemia in an adult woman. The patient presented with general weakness, poor appetite, bilateral lower limbs oedema, consciousness disturbance, and lower back pain for 3 weeks. She had a history of cervical cancer and had undergone total hysterectomy, chemotherapy, and radiation therapy. Her serum calcium level was markedly increased, at 14.1 mg/dl at admission. Neck magnetic resonance imaging, abdominal sonography, abdominal computed tomography, and bone marrow examination were performed. Laboratory data, including intact parathyroid hormone (i-PTH), peripheral blood smear, and 25-(OH) D3, were checked. Bone marrow biopsy showed B cell lymphoblastic leukaemia. Chemotherapy was initiated to be administered but was discontinued due to severe sepsis. Finally, the patient died due to septic shock. This was a rare case of B cell ALL in an adult complicated by hypercalcaemic crisis, which could be a life-threatening emergency in clinical practice. Physicians should pay attention to the associated risk factors. Early recognition and appropriate treatment may improve clinical outcomes.

Mantle Cell Lymphoma Presenting as Acute Abdominal Syndrome: A Rare Case Report and Literature Review.

BACKGROUND: Acute abdominal syndrome can be caused by several possible reasons. The most common causes are perforation of a gastroduodenal ulcer, peritonitis, intestinal obstructions, and perforation of an appendix or fallopian tube. Fever and pain can be caused by an appendicitis or sigmoiditis. Appendiceal lymphoma is a rare disease that is usually found incidentally during appendectomy. Most of the cases are non-Hodgkin's lymphomas. Mantle cell lymphoma is an aggressive B-cell non-Hodgkin's lymphoma with a poorer prognosis than other B-cell lymphomas; thus, a definitive diagnosis is essential. CASE SUMMARY: A 60-year-old man presented with right lower quadrant pain. He denied any nausea, vomiting or anorexia and was afebrile. The physical examination revealed right lower quadrant abdomen tenderness. The computed tomography scan revealed periappendiceal fatty stranding with a swollen appendix, approximately 2 cm in diameter and prominent paraaortic, portacaval and mesenteric lymph nodes. A diagnosis of acute appendicitis was made, and laparoscopic appendectomy was performed immediately. The subsequent pathological examination revealed severe congestion with lymphoid hyperplasia. The immunohistochemistry stains revealed positive staining for cluster of differentiation (CD) CD20, B-cell lymphoma-2 (Bcl-2), cyclin D1, SRY-box transcription factor-11 (SOX-11), immunoglobulin D (IgD) and immunoglobulin M (IgM) but negative staining for CD3, CD5, CD10 and CD23. 18F-FDG positron emission tomography showed peripheral lymph node involvement, while the bone marrow biopsy showed negative findings. Therefore, a diagnosis of mantle cell lymphoma, Ann Arbor stage IVA, was made. The patient received postoperative combination chemotherapy and remained in a stable condition over a 1-year follow-up period. CONCLUSION: We report an uncommon case that initially presented as acute appendicitis, for which a final diagnosis of mantle cell lymphoma was made. In comparison with other B-cell lymphomas, mantle cell lymphoma has a poorer prognosis, and positive immunochemical staining of cyclin D1 and SOX-11 is useful for differentiating mantle cell lymphoma from other appendiceal lymphomas and treating patients appropriately. Physicians and nursing staff should be also aware of the associated complications and management in these patients.