Noniridescent Biomimetic Photonic Microdomes by Inkjet Printing.

Certain bird species have evolved spectacular colors that arise from organized nanostructures of melanin. Its high refractive index (∼1.8) and broadband absorptive properties enable vivid structural colors that are nonsusceptible to photobleaching. Mimicking natural melanin structural coloration could enable several important applications, in particular, for noniridescent systems with colors that are independent of incidence angle. Here, we address this by forming melanin photonic crystal microdomes by inkjet printing. Owing to their curved nature, the microdomes exhibit noniridescent vivid structural coloration, tunable throughout the visible range via the size of the nanoparticles. Large-area arrays (>1 cm2) of high-quality photonic microdomes could be printed on both rigid and flexible substrates. Combined with scalable fabrication and the nontoxicity of melanin, the presented photonic microdomes with noniridescent structural coloration may find use in a variety of applications, including sensing, displays, and anticounterfeit holograms.

n-Type redox-tuneable conducting polymer optical nanoantennas.

Conducting polymers can be dynamically switched between being optically metallic (negative real permittivity) and dielectric (positive real permittivity) by varying their redox state. This has enabled nanoantennas with plasmonic resonances that can be reversibly turned on/off, opening for applications in dynamic metaoptics, reflective displays, and smart windows. However, previous reports on conducting polymer plasmonics were limited to p-type polymers. Here, we show that a highly conducting n-type polymer, called poly(benzodifurandione) (PBFDO), can also provide optically metallic properties and be used to make dynamic optical nanoantennas. The doped version of the polymer becomes metallic at wavelengths above around 700 nm, leading to plasmonic extinction peaks for nanodisks made from the material. These peaks can be reversibly switched off and on electrically or chemically by varying the doping level of the polymer. The study extends the field of dynamic polymer plasmonics to n-type materials and broadens the application areas of PBFDO.

Switchable Broadband Terahertz Absorbers Based on Conducting Polymer-Cellulose Aerogels.

Terahertz (THz) technologies provide opportunities ranging from calibration targets for satellites and telescopes to communication devices and biomedical imaging systems. A main component will be broadband THz absorbers with switchability. However, optically switchable materials in THz are scarce and their modulation is mostly available at narrow bandwidths. Realizing materials with large and broadband modulation in absorption or transmission forms a critical challenge. This study demonstrates that conducting polymer-cellulose aerogels can provide modulation of broadband THz light with large modulation range from ≈ 13% to 91% absolute transmission, while maintaining specular reflection loss < -30 dB. The exceptional THz modulation is associated with the anomalous optical conductivity peak of conducting polymers, which enhances the absorption in its oxidized state. The study also demonstrates the possibility to reduce the surface hydrophilicity by simple chemical modifications, and shows that broadband absorption of the aerogels at optical frequencies enables de-frosting by solar-induced heating. These low-cost, aqueous solution-processable, sustainable, and bio-friendly aerogels may find use in next-generation intelligent THz devices.

Botulinum toxin type A treatment of four cases of Wilson disease with lower limb dystonia: A prospective study.

Botulinum toxin type A (BoNT-A) has been recommended in various neurological disorders as a useful tool for alleviating dystonia. In Wilson disease (WD) patients with dystonia, BoNT-A injection can be used as a treatment modality when conventional treatment is ineffective for alleviating symptoms. The purpose of this study was to thoroughly evaluate the efficacy of BoNT-A injection in treating WD complicated by lower extremity dystonia. The efficacy of these injections was assessed by clinical scales, surface electromyography (EMG), and gait analysis. A comparative analysis of all gait parameters, EMG parameters, and clinical scales revealed a significant increase in velocity, decrease in integrated EMG (iEMG), and improvement in modified Ashworth scale (MAS), Burke Fahn Marsden (BFM), and activities of daily living (ADL) scores (all P < 0.05). Overall, our findings indicated that BoNT-A injection led to marked relief of symptoms in patients with WD with lower extremity dystonia.

Tuneable Anisotropic Plasmonics with Shape-Symmetric Conducting Polymer Nanoantennas.

A wide range of nanophotonic applications rely on polarization-dependent plasmonic resonances, which usually requires metallic nanostructures that have anisotropic shape. This work demonstrates polarization-dependent plasmonic resonances instead by breaking symmetry via material permittivity. The study shows that molecular alignment of a conducting polymer can lead to a material with polarization-dependent plasma frequency and corresponding in-plane hyperbolic permittivity region. This result is not expected based only on anisotropic charge mobility but implies that also the effective mass of the charge carriers becomes anisotropic upon polymer alignment. This unique feature is used to demonstrate circularly symmetric nanoantennas that provide different plasmonic resonances parallel and perpendicular to the alignment direction. The nanoantennas are further tuneable via the redox state of the polymer. Importantly, polymer alignment could blueshift the plasma wavelength and resonances by several hundreds of nanometers, forming a novel approach toward reaching the ultimate goal of redox-tunable conducting polymer nanoantennas for visible light.

Electrical Tuning of Plasmonic Conducting Polymer Nanoantennas.

Nanostructures of conventional metals offer manipulation of light at the nanoscale but are largely limited to static behavior due to fixed material properties. To develop the next frontier of dynamic nano-optics and metasurfaces, this study utilizes the redox-tunable optical properties of conducting polymers, as recently shown to be capable of sustaining plasmons in their most conducting oxidized state. Electrically tunable conducting polymer nano-optical antennas are presented, using nanodisks of poly(3,4-ethylenedioxythiophene:sulfate) (PEDOT:Sulf) as a model system. In addition to repeated on/off switching of the polymeric nanoantennas, the concept enables gradual electrical tuning of the nano-optical response, which was found to be related to the modulation of both density and mobility of the mobile polaronic charge carriers in the polymer. The resonance position of the PEDOT:Sulf nanoantennas can be conveniently controlled by disk size, here reported down to a wavelength of around 1270 nm. The presented concept may be used for electrically tunable metasurfaces, with tunable farfield as well as nearfield. The work thereby opens for applications ranging from tunable flat meta-optics to adaptable smart windows.

Organic Anisotropic Excitonic Optical Nanoantennas.

Optical nanoantennas provide control of light at the nanoscale, which makes them important for diverse areas ranging from photocatalysis and flat metaoptics to sensors and biomolecular tweezing. They have traditionally been limited to metallic and dielectric nanostructures that sustain plasmonic and Mie resonances, respectively. More recently, nanostructures of organic J-aggregate excitonic materials have been proposed capable of also supporting nanooptical resonances, although their advance has been hampered from difficulty in nanostructuring. Here, the authors present the realization of organic J-aggregate excitonic nanostructures, using nanocylinder arrays as model system. Extinction spectra show that they can sustain both plasmon-like resonances and dielectric resonances, owing to the material providing negative and large positive permittivity regions at the different sides of its exciton resonance. Furthermore, it is found that the material is highly anisotropic, leading to hyperbolic and elliptic permittivity regions. Nearfield analysis using optical simulation reveals that the nanostructures therefore support hyperbolic localized surface exciton resonances and elliptic Mie resonances, neither of which has been previously demonstrated for this type of material. The anisotropic nanostructures form a new type of optical nanoantennas, which combined with the presented fabrication process opens up for applications such as fully organic excitonic metasurfaces.

Dynamically Tuneable Reflective Structural Coloration with Electroactive Conducting Polymer Nanocavities.

Dynamic control of structural colors across the visible spectrum with high brightness has proven to be a difficult challenge. Here, this is addressed with a tuneable reflective nano-optical cavity that uses an electroactive conducting polymer (poly(thieno[3,4-b]thiophene)) as spacer layer. Electrochemical doping and dedoping of the polymer spacer layer provides reversible tuning of the cavity's structural color throughout the entire visible range and beyond. Furthermore, the cavity provides high peak reflectance that varies only slightly between the reduced and oxidized states of the polymer. The results indicate that the polymer undergoes large reversible thickness changes upon redox tuning, aided by changes in optical properties and low visible absorption. The electroactive cavity concept may find particular use in reflective displays, by opening for tuneable monopixels that eliminate limitations in brightness of traditional subpixel-based systems.

Safety, Tolerability and Pharmacokinetics of Single Ascending and Multiple Oral Doses of Tegoprazan in Healthy Chinese Subjects.

BACKGROUND AND OBJECTIVES: Tegoprazan is one of the potassium-competitive acid blockers (P-CABs). It exhibits its anti-secretory effects by competitively and reversibly blocking the availability of K+ of the H+, K+-ATPase. This study was designed to investigate the safety and pharmacokinetics of tegoprazan in healthy Chinese subjects. METHODS: Thirty-eight healthy Chinese subjects were recruited in this randomized, single-center, double-blind, placebo-controlled study, with a single ascending dose of 50, 100, 200 mg and a multiple dose of 100 mg for 10 days. The plasma concentration of tegoprazan was determined by a validated liquid chromatography tandem mass spectrometry (LC-MS/MS) method. Pharmacokinetics were evaluated via non-compartmental and compartmental model analysis. Safety was assessed by physical examinations, vital signs, clinical laboratory tests, and electrocardiograms. RESULTS: No serious adverse event was observed in this study. After single-dose administration (50, 100 and 200 mg), tegoprazan was rapidly absorbed with a median maximum measure plasma concentration (Tmax) at 0.5 h and declined with a terminal (elimination) half-life (t1/2) of 3.87-4.57 h. The maximum measured plasma concentration (Cmax) for tegoprazan was 813.80, 1494.60 and 2829.00 ng/mL. Meanwhile, the corresponding area under the concentration-time curve (AUC) from time zero to infinity (AUC0-inf) was 2761.00, 5980.05 and 11,044.72 ng∙h/mL in 50, 100, 200 mg group, respectively. Dose-dependent increase was observed in the value of Cmax and AUC after administration of tegoprazan 50 to 200 mg. The two-compartment model well described the pharmacokinetic profile of tegoprazan. In the steady state, no accumulation was found after repeated administration at the 100-mg dose level. No experimental differences were found based on gender. CONCLUSIONS: Tegoprazan was well tolerated in the dose range of 50-200 mg in single- and 100 mg in multiple-dose studies. Tegoprazan shows dose linearity with oral administration after a single dose of 50 to 200 mg and less drug accumulation after 10 days of continuous administration in 100 mg.

Tunable Structural Color Images by UV-Patterned Conducting Polymer Nanofilms on Metal Surfaces.

Precise manipulation of light-matter interactions has enabled a wide variety of approaches to create bright and vivid structural colors. Techniques utilizing photonic crystals, Fabry-Pérot cavities, plasmonics, or high-refractive-index dielectric metasurfaces have been studied for applications ranging from optical coatings to reflective displays. However, complicated fabrication procedures for sub-wavelength nanostructures, limited active areas, and inherent absence of tunability of these approaches impede their further development toward flexible, large-scale, and switchable devices compatible with facile and cost-effective production. Here, a novel method is presented to generate structural color images based on monochromic conducting polymer films prepared on metallic surfaces via vapor phase polymerization and ultraviolet (UV) light patterning. Varying the UV dose enables synergistic control of both nanoscale film thickness and polymer permittivity, which generates controllable structural colors from violet to red. Together with grayscale photomasks this enables facile fabrication of high-resolution structural color images. Dynamic tuning of colored surfaces and images via electrochemical modulation of the polymer redox state is further demonstrated. The simple structure, facile fabrication, wide color gamut, and dynamic color tuning make this concept competitive for applications like multifunctional displays.

Conductive polymer nanoantennas for dynamic organic plasmonics.

Being able to dynamically shape light at the nanoscale is one of the ultimate goals in nano-optics1. Resonant light-matter interaction can be achieved using conventional plasmonics based on metal nanostructures, but their tunability is highly limited due to a fixed permittivity2. Materials with switchable states and methods for dynamic control of light-matter interaction at the nanoscale are therefore desired. Here we show that nanodisks of a conductive polymer can support localized surface plasmon resonances in the near-infrared and function as dynamic nano-optical antennas, with their resonance behaviour tunable by chemical redox reactions. These plasmons originate from the mobile polaronic charge carriers of a poly(3,4-ethylenedioxythiophene:sulfate) (PEDOT:Sulf) polymer network. We demonstrate complete and reversible switching of the optical response of the nanoantennas by chemical tuning of their redox state, which modulates the material permittivity between plasmonic and dielectric regimes via non-volatile changes in the mobile charge carrier density. Further research may study different conductive polymers and nanostructures and explore their use in various applications, such as dynamic meta-optics and reflective displays.

Removal of gaseous toluene by the combination of photocatalytic oxidation under complex light irradiation of UV and visible light and biological process.

Photocatalysis is a promising technology for treatment of gaseous waste; its disadvantages, however, include causing secondary pollution. Biofiltration has been known as an efficient technology for treatment volatile organic compounds (VOCs) at low cost of maintenance, and produces harmless by-products; its disadvantages, include large volume of bioreactor and slow adaptation to fluctuating concentrations in waste gas. A bench scale system integrated with a photocatalytic oxidation and a biofilter unit for the treatment of gases containing toluene was investigated. The integrated system can effectively oxidize toluene with high removal efficiency. The photocatalytic activity of N-TiO(2)/zeolite was evaluated by the decomposition of toluene in air under UV and visible light (VL) illumination. The N-TiO(2)/zeolite has more photocatalytic activity under complex light irradiation of UV and visible light for toluene removal than that of pure TiO(2)/zeolite under UV or visible light irradiation. N-TiO(2)/zeolite was characterized by scanning electron microscopy (SEM), X-ray photoelectron spectrum analysis (XPS), Fourier transform infrared spectroscopy (FT-IR), and as-obtained products were identified by means of gas chromatography/mass spectrometry (GC/MS). Results revealed that the photocatalyst was porous and was high photoactive for mineralizing toluene. The high activity can be attributed to the results of the synergetic effects of strong UV and visible light absorption, surface hydroxyl groups. The photocatalytic degradation reaction of toluene with the N-TiO(2)/zeolite follows Langmuir-Hinshelwood kinetics. Toluene biodegradation rate matches enzymatic oxidation kinetics model.