Helical van der Waals crystals with discretized Eshelby twist.

The ability to manipulate the twisting topology of van der Waals structures offers a new degree of freedom through which to tailor their electrical and optical properties. The twist angle strongly affects the electronic states, excitons and phonons of the twisted structures through interlayer coupling, giving rise to exotic optical, electric and spintronic behaviours1-5. In twisted bilayer graphene, at certain twist angles, long-range periodicity associated with moiré patterns introduces flat electronic bands and highly localized electronic states, resulting in Mott insulating behaviour and superconductivity3,4. Theoretical studies suggest that these twist-induced phenomena are common to layered materials such as transition-metal dichalcogenides and black phosphorus6,7. Twisted van der Waals structures are usually created using a transfer-stacking method, but this method cannot be used for materials with relatively strong interlayer binding. Facile bottom-up growth methods could provide an alternative means to create twisted van der Waals structures. Here we demonstrate that the Eshelby twist, which is associated with a screw dislocation (a chiral topological defect), can drive the formation of such structures on scales ranging from the nanoscale to the mesoscale. In the synthesis, axial screw dislocations are first introduced into nanowires growing along the stacking direction, yielding van der Waals nanostructures with continuous twisting in which the total twist rates are defined by the radii of the nanowires. Further radial growth of those twisted nanowires that are attached to the substrate leads to an increase in elastic energy, as the total twist rate is fixed by the substrate. The stored elastic energy can be reduced by accommodating the fixed twist rate in a series of discrete jumps. This yields mesoscale twisting structures consisting of a helical assembly of nanoplates demarcated by atomically sharp interfaces with a range of twist angles. We further show that the twisting topology can be tailored by controlling the radial size of the structure.

Mid-Infrared, Optically Active Black Phosphorus Thin Films on Centimeter Scale.

Black phosphorus (BP) is a narrow bandgap (∼0.3 eV) semiconductor with a great potential for optoelectronic devices in the mid-infrared wavelength. However, it has been challenging to achieve a high-quality scalable BP thin film. Here we present the successful synthesis of optically active BP films on a centimeter scale. We utilize the pulsed laser deposition of amorphous red phosphorus, another allotrope of phosphorus, followed by a high-pressure treatment at ∼8 GPa to induce a phase conversion into BP crystals. The crystalline quality was improved through thermal annealing, resulting in the observation of photoluminescence emission at mid-infrared wavelengths. We demonstrate high-pressure conversion on a centimeter scale with a continuous film with a thickness of ∼18 nm using a flat-belt-type high-pressure apparatus. This synthesis procedure presents a promising route to obtain optical-quality BP films, enabling the exploration of integrated optoelectronic device applications such as light-emitting devices and mid-infrared cameras on a chip scale.

Shape-controlled single-crystal growth of InP at low temperatures down to 220 °C.

III-V compound semiconductors are widely used for electronic and optoelectronic applications. However, interfacing III-Vs with other materials has been fundamentally limited by the high growth temperatures and lattice-match requirements of traditional deposition processes. Recently, we developed the templated liquid-phase (TLP) crystal growth method for enabling direct growth of shape-controlled single-crystal III-Vs on amorphous substrates. Although in theory, the lowest temperature for TLP growth is that of the melting point of the group III metal (e.g., 156.6 °C for indium), previous experiments required a minimum growth temperature of 500 °C, thus being incompatible with many application-specific substrates. Here, we demonstrate low-temperature TLP (LT-TLP) growth of single-crystalline InP patterns at substrate temperatures down to 220 °C by first activating the precursor, thus enabling the direct growth of InP even on low thermal budget substrates such as plastics and indium-tin-oxide (ITO)-coated glass. Importantly, the material exhibits high electron mobilities and good optoelectronic properties as demonstrated by the fabrication of high-performance transistors and light-emitting devices. Furthermore, this work may enable integration of III-Vs with silicon complementary metal-oxide-semiconductor (CMOS) processing for monolithic 3D integrated circuits and/or back-end electronics.

Defect reconfiguration in a Ti-Al alloy via electroplasticity.

It has been known for decades that the application of pulsed direct current can significantly enhance the formability of metals. However, the detailed mechanisms of this effect have been difficult to separate from simple Joule heating. Here, we study the electroplastic deformation of Ti-Al (7 at.% Al), an alloy that is uniquely suited for uncoupling this behaviour because, contrary to most metals, it has inherently lower ductility at higher temperature. We find that during mechanical deformation, electropulsing enhances cross-slip, producing a wavy dislocation morphology, and enhances twinning, which is similar to what occurs during cryogenic deformation. As a consequence, dislocations are prevented from localizing into planar slip bands that would lead to the early failure of the alloy under tension. Our results demonstrate that this macroscopic electroplastic behaviour originates from defect-level microstructural reconfiguration that cannot be rationalized by simple Joule heating.

Gate Quantum Capacitance Effects in Nanoscale Transistors.

As the physical dimensions of a transistor gate continue to shrink to a few atoms, performance can be increasingly determined by the limited electronic density of states (DOS) in the gate and the gate quantum capacitance (CQ). We demonstrate the impact of gate CQ and the dimensionality of the gate electrode on the performance of nanoscale transistors through analytical electrostatics modeling. For low-dimensional gates, the gate charge can limit the channel charge, and the transfer characteristics of the device become dependent on the gate DOS. We experimentally observe for the first time, room-temperature gate quantization features in the transfer characteristics of single-walled carbon nanotube (CNT)-gated ultrathin silicon-on-insulator (SOI) channel transistors; features which can be attributed to the Van Hove singularities in the one-dimensional DOS of the CNT gate. In addition to being an important aspect of future transistor design, potential applications of this phenomenon include multilevel transistors with suitable transfer characteristics obtained via engineered gate DOS.

Measuring the Edge Recombination Velocity of Monolayer Semiconductors.

Understanding edge effects and quantifying their impact on the carrier properties of two-dimensional (2D) semiconductors is an essential step toward utilizing this material for high performance electronic and optoelectronic devices. WS2 monolayers patterned into disks of varying diameters are used to experimentally explore the influence of edges on the material's optical properties. Carrier lifetime measurements show a decrease in the effective lifetime, τeffective, as a function of decreasing diameter, suggesting that the edges are active sites for carrier recombination. Accordingly, we introduce a metric called edge recombination velocity (ERV) to characterize the impact of 2D material edges on nonradiative carrier recombination. The unpassivated WS2 monolayer disks yield an ERV ∼ 4 × 104 cm/s. This work quantifies the nonradiative recombination edge effects in monolayer semiconductors, while simultaneously establishing a practical characterization approach that can be used to experimentally explore edge passivation methods for 2D materials.

Meter-scale van der Waals films manufactured via one-step roll printing.

A weak van der Waals (vdW) force in layered materials enables their isolation into thin flakes through mechanical exfoliation while sustaining their intrinsic electronic and optical properties. Here, we introduce a universal roll-printing method capable of producing vdW multilayer films on wafer-to-meter scale. This process uses sequential exfoliation and transfer of layered materials from the powder sources to target substrates through a repeated rolling of a cylindrical metal drum. We achieve uniformly coated films with a library of vdW powders on various mechanically rigid and flexible substrates. The printed films are configured into different devices including light-emitting diodes and photodetectors. The presented technique offers substantial benefits in terms of cost efficiency and a low thermal budget while offering high material quality.

Large reaction rate enhancement in formation of ultrathin AuSi eutectic layers.

Metal-semiconductor eutectic liquids play a key role in both the fundamental understanding of atomic interactions and nanoscale synthesis and catalysis. At reduced sizes they exhibit properties distinct from the bulk. In this work we show an unusual effect that the formation of AuSi eutectic liquid layers is much easier for smaller thicknesses. The alloying reaction rate is enhanced by over 20 times when the thickness is reduced from 300 to 20 nm. The strong enhancement is attributed to a strain-induced increase in the chemical potential of the solid layer prior to the alloying reaction.

Enhanced Neutral Exciton Diffusion in Monolayer WS2 by Exciton-Exciton Annihilation.

Dominant recombination pathways in monolayer transition metal dichalcogenides (TMDCs) depend primarily on background carrier concentration, generation rate, and applied strain. Charged excitons formed in the presence of background carriers mainly recombine nonradiatively. Neutral excitons recombine completely radiatively at low generation rates, but experience nonradiative exciton-exciton annihilation (EEA) at high generation rates. Strain can suppress EEA, resulting in near-unity photoluminescence quantum yield (PL QY) at all exciton densities. Although exciton diffusion is the primary channel of energy transport in excitonic materials and a critical optoelectronic design consideration, the combined effects of these factors on exciton diffusion are not clearly understood. In this work, we decouple the diffusion of neutral and charged excitons with chemical counterdoping and explore the effect of strain and generation rate on exciton diffusion. According to the standard semiconductor paradigm, a shorter carrier recombination lifetime should lead to a smaller diffusion length. Surprisingly, we find that increasing generation rate shortens the exciton lifetime but increases the diffusion length in unstrained monolayers of TMDCs. When we suppress EEA by strain, both lifetime and diffusion length become independent of generation rate. During EEA one exciton nonradiatively recombines and kinetically energizes another exciton, which then diffuses fast. Our results probe concentration-dependent diffusion of pure neutral excitons by counterdoping and elucidate how strain controls exciton transport and many-body interactions in TMDC monolayers.

Tellurium Single-Crystal Arrays by Low-Temperature Evaporation and Crystallization.

Thermally evaporated tellurium possesses an intriguing crystallization behavior, where an amorphous to crystalline phase transition happens at near-ambient temperature. However, a comprehensive understanding and delicate control of the crystallization process for the evaporated Te films is lacking. Here, the kinetics and dynamics of the crystallization of thermally evaporated Te films is visualized and modeled. Low-temperature processing of highly crystalline tellurium films with large grain size and preferred out-of-plane orientation ((100) plane parallel to the surface) is demonstrated by controlling the crystallization process. Tellurium single crystals with a lateral dimension of up to 6 µm are realized on various substrates including glass and plastic. Field-effect transistors based on 5 °C crystallized Te single grains (6-nm-thick) exhibit an average effective hole mobility of ≈100 cm2 V-1 s-1 , and on/off current ratio of ≈3 × 104 .

Elimination of oxygen sensitivity in α-titanium by substitutional alloying with Al.

Individually, increasing the concentration of either oxygen or aluminum has a deleterious effect on the ductility of titanium alloys. For example, extremely small amounts of interstitial oxygen can severely deteriorate the tensile ductility of titanium, particularly at cryogenic temperatures. Likewise, substitutional aluminum will decrease the ductility of titanium at low-oxygen concentrations. Here, we demonstrate that, counter-intuitively, significant additions of both Al and O substantially improves both strength and ductility, with a 6-fold increase in ductility for a Ti-6Al-0.3 O alloy as compared to a Ti-0.3 O alloy. The Al and O solutes act together to increase and sustain a high strain-hardening rate by modifying the planar slip that predominates into a delocalized, three-dimensional dislocation pattern. The mechanism can be attributed to decreasing stacking fault energy by Al, modification of the "shuffle" mechanism of oxygen-dislocation interaction by the repulsive Al-O interaction in Ti, and micro-segregation of Al and O by the same cause.

Nano-topology optimization for materials design with atom-by-atom control.

Atoms are the building blocks of matter that make up the world. To create new materials to meet some of civilization's greatest needs, it is crucial to develop a technology to design materials on the atomic and molecular scales. However, there is currently no computational approach capable of designing materials atom-by-atom. In this study, we consider the possibility of direct manipulation of individual atoms to design materials at the nanoscale using a proposed method coined "Nano-Topology Optimization". Here, we apply the proposed method to design nanostructured materials to maximize elastic properties. Results show that the performance of our optimized designs not only surpasses that of the gyroid and other triply periodic minimal surface structures, but also exceeds the theoretical maximum (Hashin-Shtrikman upper bound). The significance of the proposed method lies in a platform that allows computers to design novel materials atom-by-atom without the need of a predetermined design.

Mechanistic basis of oxygen sensitivity in titanium.

One of the most potent examples of interstitial solute strengthening in metal alloys is the extreme sensitivity of titanium to small amounts of oxygen. Unfortunately, these small amounts of oxygen also lead to a markedly decreased ductility, which in turn drives the increased cost to purify titanium to avoid this oxygen poisoning effect. Here, we report a systematic study on the oxygen sensitivity of titanium that provides a clear mechanistic view of how oxygen impurities affect the mechanical properties of titanium. The increased slip planarity of Ti-O alloys is caused by an interstitial shuffling mechanism, which is sensitive to temperature, strain rate, and oxygen content and leads to the subsequent alteration of deformation twinning behavior. The insights from our experimental and computational work provide a rationale for the design of titanium alloys with increased tolerance to variations in interstitial content, with notable implications for more widespread use of titanium alloys.

Synthetic WSe2 monolayers with high photoluminescence quantum yield.

In recent years, there have been tremendous advancements in the growth of monolayer transition metal dichalcogenides (TMDCs) by chemical vapor deposition (CVD). However, obtaining high photoluminescence quantum yield (PL QY), which is the key figure of merit for optoelectronics, is still challenging in the grown monolayers. Specifically, the as-grown monolayers often exhibit lower PL QY than their mechanically exfoliated counterparts. In this work, we demonstrate synthetic tungsten diselenide (WSe2) monolayers with PL QY exceeding that of exfoliated crystals by over an order of magnitude. PL QY of ~60% is obtained in monolayer films grown by CVD, which is the highest reported value to date for WSe2 prepared by any technique. The high optoelectronic quality is enabled by the combination of optimizing growth conditions via tuning the halide promoter ratio, and introducing a simple substrate decoupling method via solvent evaporation, which also mechanically relaxes the grown films. The achievement of scalable WSe2 with high PL QY could potentially enable the emergence of technologically relevant devices at the atomically thin limit.

Direct imaging of short-range order and its impact on deformation in Ti-6Al.

Chemical short-range order (SRO) within a nominally single-phase solid solution is known to affect the mechanical properties of alloys. While SRO has been indirectly related to deformation, direct observation of the SRO domain structure, and its effects on deformation mechanisms at the nanoscale, has remained elusive. Here, we report the direct observation of SRO in relation to deformation using energy-filtered imaging in a transmission electron microscope (TEM). The diffraction contrast is enhanced by reducing the inelastically scattered electrons, revealing subnanometer SRO-enhanced domains. The destruction of these domains by dislocation planar slip is observed after ex situ and in situ TEM mechanical testing. These results confirm the impact of SRO in Ti-Al alloys on the scale of angstroms. The direct confirmation of SRO in relationship to dislocation plasticity in metals can provide insight into how the mechanical behavior of concentrated solid solutions by the material's thermal history.

Strain-engineered growth of two-dimensional materials.

The application of strain to semiconductors allows for controlled modification of their band structure. This principle is employed for the manufacturing of devices ranging from high-performance transistors to solid-state lasers. Traditionally, strain is typically achieved via growth on lattice-mismatched substrates. For two-dimensional (2D) semiconductors, this is not feasible as they typically do not interact epitaxially with the substrate. Here, we demonstrate controlled strain engineering of 2D semiconductors during synthesis by utilizing the thermal coefficient of expansion mismatch between the substrate and semiconductor. Using WSe2 as a model system, we demonstrate stable built-in strains ranging from 1% tensile to 0.2% compressive on substrates with different thermal coefficient of expansion. Consequently, we observe a dramatic modulation of the band structure, manifested by a strain-driven indirect-to-direct bandgap transition and brightening of the dark exciton in bilayer and monolayer WSe2, respectively. The growth method developed here should enable flexibility in design of more sophisticated devices based on 2D materials.Strain engineering is an essential tool for modifying local electronic properties in silicon-based electronics. Here, Ahn et al. demonstrate control of biaxial strain in two-dimensional materials based on the growth substrate, enabling more complex low-dimensional electronics.

Gold-Mediated Exfoliation of Ultralarge Optoelectronically-Perfect Monolayers.

Gold-mediated exfoliation of ultralarge optoelectronically perfect monolayers with lateral dimensions up to ≈500 µm is reported. Electrical, optical, and X-ray photo-electron spectroscopy characterization show that the quality of the gold-exfoliated flakes is similar to that of tape-exfoliated flakes. Large-area flakes allow manufacturing of large-area mono-layer transition metal dichalcogenide electronics.

Direct growth of single-crystalline III-V semiconductors on amorphous substrates.

The III-V compound semiconductors exhibit superb electronic and optoelectronic properties. Traditionally, closely lattice-matched epitaxial substrates have been required for the growth of high-quality single-crystal III-V thin films and patterned microstructures. To remove this materials constraint, here we introduce a growth mode that enables direct writing of single-crystalline III-V's on amorphous substrates, thus further expanding their utility for various applications. The process utilizes templated liquid-phase crystal growth that results in user-tunable, patterned micro and nanostructures of single-crystalline III-V's of up to tens of micrometres in lateral dimensions. InP is chosen as a model material system owing to its technological importance. The patterned InP single crystals are configured as high-performance transistors and photodetectors directly on amorphous SiO2 growth substrates, with performance matching state-of-the-art epitaxially grown devices. The work presents an important advance towards universal integration of III-V's on application-specific substrates by direct growth.

Self-Passivation of Defects: Effects of High-Energy Particle Irradiation on the Elastic Modulus of Multilayer Graphene.

The elastic modulus of multilayer graphene is found to be more robust to damage created by high-energy α-particle irradiation as compared to monolayer graphene. Theoretical analysis indicates that irradiation of multilayer graphene generates interlayer links that potentially increase the stiffness of the multilayer by passivating local defects.

A direct thin-film path towards low-cost large-area III-V photovoltaics.

III-V photovoltaics (PVs) have demonstrated the highest power conversion efficiencies for both single- and multi-junction cells. However, expensive epitaxial growth substrates, low precursor utilization rates, long growth times, and large equipment investments restrict applications to concentrated and space photovoltaics (PVs). Here, we demonstrate the first vapor-liquid-solid (VLS) growth of high-quality III-V thin-films on metal foils as a promising platform for large-area terrestrial PVs overcoming the above obstacles. We demonstrate 1-3 µm thick InP thin-films on Mo foils with ultra-large grain size up to 100 µm, which is ~100 times larger than those obtained by conventional growth processes. The films exhibit electron mobilities as high as 500 cm²/V-s and minority carrier lifetimes as long as 2.5 ns. Furthermore, under 1-sun equivalent illumination, photoluminescence efficiency measurements indicate that an open circuit voltage of up to 930 mV can be achieved, only 40 mV lower than measured on a single crystal reference wafer.