Disturbance of intermolecular forces: eutectics as a new tool for the preparation of vapor-phase deposition precursors.

The volatile bis(tert-butylimido)dichloromolybdenum(VI) compounds, (tBuN)2MoCl2·dad (dad = 1,4-di-tert-butyl-1,3-diazabutadiene) (1) and [(tBuN)2MoCl(µ-Cl)·(tBuNH2)]2 (2), form a eutectic, with a two to one composition (χ2 = 0.33). A decrease of 40 °C in the melting temperature has been observed between the eutectic mixture and the pure compounds. We have isolated a co-crystal of (tBuN)2MoCl2·dme (dme = 1,2-dimethoxyethane) (3) and 2, also in a two to one ratio, which serves as a structural model for such mixtures. The lower melting point of carefully chosen eutectic mixtures can offer more consistent precursor delivery in deposition processes.

Simple Ion-Gas Mixtures as a Source of Key Molecules Relevant to Prebiotic Chemistry.

Very simple chemistry can result in the rapid and high-yield production of key prebiotic inorganic molecules. The two reactions investigated here involve such simple systems, (a) carbon disulfide (CS2) and acetate (CH3COO¯) and (b) sulfur dioxide (SO2) and formate (HCOO¯). They have been carried out under non-aqueous conditions, either in an organic solvent or with a powdered salt exposed to the requisite gas. Under such dry conditions the first reaction generated the thioacetate anion [CH3COS]¯ while the second produced the radical [SO2·]¯anion. Anhydrous conditions are not rare and may have arisen on the early earth at sites where an interface between different phases (liquid/gas or solid/gas) could be generated. This is one way to rationalize the formation of molecules and ions (such as we have produced) necessary in the prebiotic world. Interpretation of our results provides insight into scenarios consistent with the more prominent theories of abiogenesis.

Heavy Metals Make a Chain: A Catenated Bismuth Compound.

Catenation is common for the light main-group elements whereas it is rare for the heavy elements. Herein, we report the first example of a neutral molecule containing a Bi4 chain. It is prepared in a one-step reaction between bismuth trichloride and bis(diisopropylphosphino)amine in methanol suspension. The same reaction carried out in dichloromethane gives quite different products. All products have been characterized spectroscopically and using single-crystal X-ray analysis.

Mono- and Bis(imidazolidinium ethynyl) Cations and Reduction of the Latter To Give an Extended Bis-1,4-([3]Cumulene)-p-carboquinoid System.

An extended π-system containing two [3]cumulene fragments separated by a p-carboquinoid and stabilized by two capping N-heterocyclic carbenes (NHCs) has been prepared. Mono- and bis(imidazolidinium ethynyl) cations have also been synthesized from the reaction of an NHC with phenylethynyl bromide or 1,4-bis(bromoethynyl)benzene. Cyclic voltammetry coupled with synthetic and structural studies showed that the dication is readily reduced to a neutral, singlet bis-1,4-([3]cumulene)-p-carboquinoid as a result of the π-accepting properties of the capping NHCs.

Rapid, Reversible, Solid-Gas and Solution-Phase Insertion of CO2 into In-P Bonds.

The P,P-chelated heteroleptic complex bis[bis(diisopropylphosphino)amido]indium chloride [(i-Pr2P)2N]2InCl was prepared in high yield by treating InCl3 with 2 equiv of (i-Pr2P)2NLi in Et2O/tetrahydrofuran solution. Samples of [(i-Pr2P)2N]2InCl in a pentane slurry, a CH2Cl2 solution, or in the solid state were exposed to CO2, resulting in the insertion of CO2 into two of the four M-P bonds to produce [O2CP(i-Pr2)NP(i-Pr2)]2InCl in each case. Compounds were characterized by multinuclear NMR and IR spectroscopy, as well as single-crystal X-ray diffraction. ReactIR solution studies show that the reaction is complete in less than 1 min at room temperature in solution and in less than 2 h in the solid-gas reaction. The CO2 complex is stable up to at least 60 °C under vacuum, but the starting material is regenerated with concomitant loss of carbon dioxide upon heating above 75 °C. The compound [(i-Pr2P)2N]2InCl also reacts with CS2 to give a complicated mixture of products, one of which was identified as the CS2 cleavage product [S═P(i-Pr2)NP(i-Pr2)]2InCl]2(µ-Cl)[µ-(i-Pr2P)2N)].

Comment on "crystallographic snapshot of an arrested intermediate in the biomimetic activation of CO2 ".

Out of focus: A recent Communication published in this journal describes the synthesis of [nBu4 N]HCO3 . The authors performed a single-crystal X-ray study that revealed a putative species described as an incipient hydroxide ion engaging in a long, and presumably weak, interaction with CO2 . Our recent exploration of the coordination chemistry of CO2 with small ions leads us to believe that such an exceptional bonding situation is unlikely. Instead, we argue that the crystal structure is that of [nBu4 N]O2 CCH3 and therefore not representative of the bulk powder from the synthesis.

NH/PH isomerization and a Lewis pair for carbon dioxide capture.

Bis(di-i-propylphosphino)amine 1 reacts with B(C6F5)3 to form an adduct with concomitant N/P H-isomerization. This species reacts smoothly with carbon dioxide. An attempt to prepare an anionic derivative resulted in the formation of a novel heterocycle derived from the PNP ligand and B(C6F5)3.

Higher-order zincates as transmetalators in alkyl-alkyl negishi cross-coupling.

Negishi revisited: higher-order alkyl zincates have been subjected to Negishi coupling with alkyl bromides. For the first time, coupling takes place in straight THF, i.e., without a salt additive and a high dielectric co-solvent. This provides evidence that it is the higher-order zincate that undergoes transmetalation to Pd, and not mono-anionic zincates or any of the other species present in the Schlenk equilibrium.

Anhydrous TEMPO-H: reactions of a good hydrogen atom donor with low-valent carbon centres.

In this paper, we report a novel synthesis of anhydrous 1-hydroxy-2,2,6,6-tetramethyl-piperidine (TEMPO-H). An X-ray crystal structure and full characterization of the compound are included. Compared to hydrated TEMPO-H, its anhydrous form exhibits improved stability and a differing chemical reactivity. The reactions of anhydrous TEMPO-H with a variety of low-valent carbon centres are described. For example, anhydrous TEMPO-H was reacted with 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (IMes), an unsaturated NHC. Crystals of [CHNC(6)H(2)(CH(3))(3)](2)C···HO(NC(5)H(6)(CH(3))(4)), IMes···TEMPO-H, were isolated and a crystal structure determined. The experimental structure is compared to the results of theoretical calculations on the hydrogen-bonded dimer. Anhydrous TEMPO-H was also reacted with the saturated NHC, 1,3-bis(2,6-diisopropylphenyl)imidazolidin-2-ylidene (SIPr), giving the product [CH(2)Ni-Pr(2)C(6)H(3)](2)CH···O(NC(5)H(6)(CH(3))(4)). In contrast, the reaction of hydrated TEMPO-H with 1,3-bis(2,6-diisopropylphenyl)imidazolidin-2-ylidene gave small amounts of the hydrolysis product, N-(2,6-diisopropylphenyl)-N-[2-(2,6-diisopropylphenylamino)ethyl]formamide. Finally, anhydrous TEMPO-H was reacted with (triphenylphosphoranylidene)ketene to generate Ph(3)PC(H)C(=O)O(NC(5)H(6)(CH(3))(4)). A full characterization of the product, including an X-ray crystal structure, is described.

Canadian bitumen is engineered for transport, but the type of product produced can affect spill contingency planning.

Canadian bitumen is too viscous to transport by rail and pipeline to markets. One approach to solve this viscosity issue is to dilute the bitumen with a thinning agent to meet transport specifications, but the addition of diluent underutilizes pipeline capacity and increases production cost. A second approach involves the partial refinement of bitumen to produce synthetic crude, which better utilizes pipeline capacity; however, capital and operational costs are high. A third alternative is a new technology that involves wrapping bitumen in a polymer layer to form a solid "puck" termed Canapux, but transportation of this product to coastal ports is limited to rail. Also, greenhouse gas emissions are greater when oil is transported by rail rather than pipeline. In the end, a variety of bitumen products will be transported in Canada, but not all of these products will respond to remediation equally when spilled. In order to ensure effective spill contingency planning, we recommend that engineered bitumen products have physical properties that are resilient to change, within the range of typical response times, after a spill.

Homolytic cleavage of Lawesson's reagent: N-heterocyclic carbene complexes of ArPS2 (Ar = 4-CH3O-C6H4).

Lawesson's reagent (LR) has been shown to react with the N-heterocyclic carbenes [1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (IMes) and 1,3-bis(2,6-diisopropylphenyl)imidazolidin-2-ylidene (SIPr)] to give adducts of the general form NHC·P(S)2-C6H4OCH3. Full characterizations, including X-ray crystal structures, are provided. The reaction of Woollins' reagent (WR) with IMes gave the known selanone, (IMes)Se.

Coordination, reactivity, and structural properties of electron-rich ethoxy- and dimethylamino-substituted 1,3-diketiminate ligands and their complexes.

In this paper we describe the synthesis, characterization, and X-ray crystal structures of two ligands, diethyl-N,N'-bis(p-tolyl)malonimidate and 1,3-bis(dimethylamino)-N,N'-bis(p-tolyl)propanediimidate. Their corresponding rhodium(i) dicarbonyl, dimethylaluminium, and bis-ligated zinc complexes have also been prepared and characterized. The donor properties of the ligands have been studied and have been compared to those of the traditional anionic N,N'-chelating ligand nacnac.

Grignard reagents in ionic solvents: electron transfer reactions and evidence for facile Br-Mg exchange.

Grignard reagents form persistent solutions in phosphonium ionic liquids possessing O-donor anions and these solutions are excellent reaction media for electron transfer processes and transmetallation reactions.

Crystal structure of 2,4,6-tri-methyl-benzoic anhydride.

The title compound, C20H22O3, was formed in the reaction between 2,4,6-tri-methyl-benzoic acid and N,N-diiso-propyl-ethyl-amine in the presence of 1,3-di-chloro-1,3-bis-(di-methyl-amino)-propenium hydrogen dichloride, and was recrystallized from diethyl ether solution. It is the first exclusively alkyl-substituted benzoic anhydride to have been structurally characterized. The asymmetric unit consists of a half mol-ecule, the other half of which is generated by twofold rotation symmetry; the dihedral angle between the symmetry-related aromatic rings is 54.97 (3)°. The geometric parameters of the aromatic ring are typical of those for 2,4,6-tri-methyl-phenyl substituted groups. The C=O and C-O bond lengths are 1.1934 (12) and 1.3958 (11) Å, respectively, and the angle between these three atoms (O=C-O) is 121.24 (9)°. In the crystal, mol-ecules are linked by weak C-H⋯O hydrogen bonds and C-H⋯π inter-actions. The packing features wavy chains that extend parallel to [001].

An oil spill decision matrix in response to surface spills of various bitumen blends.

Canada's production, transport, and sale of diluted bitumen (dilbit) products are expected to increase by a million barrels per day over the next decade. The anticipated growth in oil production and transport increases the risk of oil spills in aquatic areas and places greater demands on oil spill capabilities to respond to spills, which have raised stakeholder concerns. Current oil spill models only predict the transport of bitumen blends that are used in contingency plans and oil spill response strategies, rather than changes in the oil's physical properties that are relevant to spill response. We conducted weathering studies of five oil products (two conventional oils and three bitumen blends) in the Department of Fisheries and Oceans' flume tank. We also considered two initial oil slick thicknesses, 4.0 mm and 7.0 mm. We found that there is a major difference in the time evolution of oil properties (density and viscosity), raising doubts on weathering models that do not consider the thickness of oil. We also developed empirical expressions for the evolution of the density and viscosity of these oil products. The findings from the 4.0 mm results were incorporated with data from the literature to provide an update on the factors to consider during the decision making for spills of diluted bitumen products. The matrix indicated that most response options, including chemical dispersants, work much more effectively within 48 hours of the initiation of weathering. After this window of opportunity closes, natural attenuation or in situ burning is the only option remaining, but containment of oil is a limiting factor for in situ burning.

From the reactivity of N-heterocyclic carbenes to new chemistry in ionic liquids.

N-Heterocyclic carbenes have numerous applications in synthetic chemistry. We detail the reactivity and chemistry of these molecules including investigations into their reactions with small reagents, their use for the preparation of polarised azines and their potential application as NLO materials. The chemistry of imidazolium salts, which are related to NHCs by the addition of a proton, is also discussed. New chemistry for ionic liquids is also revealed.

RADMAP: Simple probes for rapid assessment of complex reactivity: A method and case studies on the reaction of hydrogen atoms with unsaturated organic molecules.

RADMAP, an open source program, allows for rapid analysis and visualization of the earliest stages of reactions between any molecule and a monoatomic probe (i.e., H*, H(+), H(-), Br*, or any other monoatomic species) using ab initio methods. This program creates non-planar potential energy surfaces of the initial interaction between a molecule of interest and the monoatomic probe. These surfaces can be used to both predict the site of addition as well as provide a qualitative estimate for the relative proportion of the formation of adducts; therefore, it gives insight into both the reactivity and the kinetic stability of a molecule. The program presents a way to quickly predict the number of signals anticipated in transverse field muon spin resonance spectra as well as their relative intensities.

Phosphonium ionic liquids as reaction media for strong bases.

Phosphonium ionic liquids are compatible with strong bases; for example, solutions composed of commercially available phenylmagnesium bromide in THF are persistent in tetradecyl(trihexyl)phosphonium chloride for several hours-days: their stability appears to be couched in kinetic terms.

A computational study of the reactions of a beta-diketiminatoaluminium(I) complex with the hydrogen atom and the electron.

A computational study has been performed to examine the reactions of a model beta-diketiminatoaluminium (I) complex with the hydrogen atom and with the electron. It was found that the hydrogen atom adds to the metal centre exothermically (DeltaH(rxn)=-202 kJ mol(-1)), and the spin density in the resulting radical resides entirely on the beta-diketiminato ligand. The spin density of the corresponding radical anion is very similar to the H-adduct.

Structurally simple complexes of CO2.

The ability to bind CO2 through the formation of low-energy, easily-broken, bonds could prove invaluable in a variety of chemical contexts. For example, weak bonds to CO2 would greatly decrease the cost of the energy-intensive sorbent-regeneration step common to most carbon capture technologies. Furthermore, exploration of this field could lead to the discovery of novel CO2 chemistry. Reduction of complexed carbon dioxide might generate chemical feedstocks for the preparation of value-added products, particularly transportation fuels or fuel precursors. Implementation on a large scale could help to drastically reduce CO2 concentrations in the atmosphere. However, literature examples of weakly bonded complexes of CO2 are relatively few and true coordination complexes to a 'naked' CO2 fragment are nearly unheard of. In this review article, a variety of complexes of CO2 featuring diverse binding modes and reactivity will be examined. Topics covered include: (A) inclusion complexes of CO2 in porous materials. (B) Zwitterionic carbamates produced from the reaction of CO2 with polyamines. (C) Carbamate salts produced from reaction of CO2 with two equivalents of an amine. (D) Insertion products of CO2 into acid-base adducts (e.g., metal complexes). (E) Lewis acid-base activated CO2, such as frustrated Lewis pair complexes. (F) Simple base-CO2 adducts, wherein the base-CO2 bond is the only interaction formed. Complexes in the last category are of particular interest, and include imidazol-2-carboxylates (N-heterocyclic carbene adducts of CO2) as well as a few other examples that lie outside NHC chemistry.