Tuning Spin Current Injection at Ferromagnet-Nonmagnet Interfaces by Molecular Design.

There is a growing interest in utilizing the distinctive material properties of organic semiconductors for spintronic applications. Here, we explore the injection of pure spin current from Permalloy into a small molecule system based on dinaphtho[2,3-b:2,3-f]thieno[3,2-b]thiophene (DNTT) at ferromagnetic resonance. The unique tunability of organic materials by molecular design allows us to study the impact of interfacial properties on the spin injection efficiency systematically. We show that both the spin injection efficiency at the interface and the spin diffusion length can be tuned sensitively by the interfacial molecular structure and side chain substitution of the molecule.

Co-sputtering of gold and copper onto liquids: a route towards the production of porous gold nanoparticles.

Effective methods for the synthesis of high-purity nanoparticles (NPs) have been extensively studied for a few decades. Among others, cold plasma-based sputtering metals onto a liquid substrate appears to be a very promising technique for the synthesis of high-purity NPs. The process enables the production of very small NPs without using any toxic reagents and complex chemical synthesis routes, and enables the synthesis of alloy NPs which can be the first step towards the formation of porous NPs. In this paper, the synthesis of gold-copper alloy NPs has been performed by co-sputtering gold and copper targets over pentaerythritol ethoxylate. The resulting solutions contain a mixture of gold, copper oxide, and alloy NPs having a radius of few angstroms. The annealing of these NPs, inside the solution, has been performed in order to increase their size and further induce the dealloying of the Au-Cu NPs. The resulting NPs exhibit either a nanoporous structure or are self-organized in an agglomerate of small NPs.

Theoretical characterization of the electronic properties of heterogeneous vertical stacks of 2D metal dichalcogenides containing one doped layer.

The rise of van der Waals hetero-structures based on transition metal dichalcogenides (TMDs) opens the door to a new generation of optoelectronic devices. A key factor controlling the operation and performance of such devices is the relative alignment of the band edges of the components. The electronic properties of the layers can be further modulated by chemical doping, typically leading to the introduction of gap states. However, it is not clear whether the impact of doping in a given layer is preserved when building vertical stacks incorporating it. This has motivated the present study aiming at shedding light by means of first-principles calculations on the electronic properties of heterogeneous bilayers containing one doped layer. Doping has been achieved based on the experimental literature by inserting the dopants by substitution in the 2D layer, by covalently attaching adatoms or functional groups on the surface, or by physisorbing electroactive molecules. Interestingly, very different scenarios can be encountered depending on the two materials present and the nature of doping. The impact of doping is preserved when the trap levels associated with the dopants lie in the bandgap of the bilayer. On the other hand, the pristine neutral layer can get doped to an extent depending on how its electrons can fill the trap levels associated with the other component. Altogether, the present theoretical work demonstrates that the properties of the bilayers are not simply defined by additive rules of the components.

Influence of the nature of the anchoring group on electron injection processes at dye-titania interfaces.

We report (time-dependent) density functional theory calculations characterizing the changes in the electronic and optical properties of oligothiophene dyes when grafted on a titania surface via a carboxylic acid or catechol moiety as anchoring group, in relation to their use in dye-sensitized solar cells. The broadening of the LUMO level of the compounds upon adsorption has been extracted from the computed electronic structures and used to estimate electron injection times into the conduction band of the oxide. The strongly coupled carboxylic-containing dyes lead to faster electron injection times compared to catechol-substituted dyes. This difference is ascribed to the electron-donating character of the catechol moiety that polarizes the dye LUMO away from the dye@titania interface. The absorption spectra simulated at the TD-DFT level indicate that the grafted carboxylic-thiophene dyes undergo an indirect injection mechanism (type I) in which an intramolecular excitation is created before the charge is transferred to titania. In contrast, catechol dyes with a short conjugation length for the thiophene backbone are type II sensitizers exhibiting a direct injection mechanism leading to a direct photoexcitation from the dye HOMO to the titania conduction band. A mixed character prevails for the injection in the case of catechol dyes containing a longer oligothiophene chain.

Work function modification of the (111) gold surface covered by long alkanethiol-based self-assembled monolayers.

Many recent experimental studies have demonstrated that the deposition of self-assembled monolayers on a metal electrode can significantly modulate its work function and hence charge injection properties in organic-based devices. In this context, we model here by means of Density Functional Theory (DFT) calculations the deposition of long saturated and partially fluorinated alkanethiol chains on the gold (111) surface and explore the shift in the work function while changing the size and degree of fluorination of the molecular backbone in order to contribute to the definition of design rules. Among all the derivatization schemes, only the introduction of a terminal fluoromethyl unit leads to an appreciable change in the work function shift, further accompanied by a reversal of its sign. The results show pronounced odd-even effects with different origins.

Polar Polymorphism: A New Intermediate Structure toward the Thin-Film Phase in Asymmetric Benzothieno[3,2-b][1]-benzothiophene Derivatives.

Understanding structure and polymorphism is relevant for any organic device optimization, and it is of particular relevance in 7-decyl-2-phenyl[1]benzothieno[3,2-b][1]benzothiophene (Ph-BTBT-10) since high carrier mobility in Ph-BTBT-10 thin films has been linked to the structural transformation from the metastable thin-film phase to the thermodynamically stable bilayer structure via thermal annealing. We combine here a systematic nanoscale morphological analysis with local Kelvin probe force microcopy (KPFM) that demonstrates the formation of a polar polymorph in thin films as an intermediate structure for thicknesses lower than 20 nm. The polar structure develops with thickness a variable amount of structural defects in the form of individual flipped molecules (point defects) or sizable polar domains, and evolves toward the reported nonpolar thin-film phase. The direct experimental evidence is supported by electronic structure density functional theory calculations. The structure of the film has dramatic effects on the electronic properties, leading to a decrease in the film work function (by up to 1 eV) and a considerable broadening of the occupied molecular orbitals, attributed to electrostatic disorder. From an advanced characterization point of view, KPFM stands out as a valuable tool for evaluating electrostatic disorder and the conceivable emergence of polar polymorphs in organic thin films. The emergence of polar assemblies introduces a critical consideration for other asymmetric BTBT derivatives, which may be pivotal to understanding the structure-property relationships in organic field-effect transistors (OFETs). A precise determination of any polar assemblies close to the dielectric interface is critical for the judicious design and upgrading of high-performance OFETs.

One-step synthesis of photoluminescent nanofluids by direct loading of reactively sputtered cubic ZrN nanoparticles into organic liquids.

ZrN nanofluids may exhibit unique optoelectronic properties because of the matching of the solar spectrum with interband transitions and localized surface plasmon resonance (LSPR). Nevertheless, these nanofluids have scarcely been investigated, mainly because of the complexity of the current synthetic routes that involve aggressive chemicals and high temperatures. This work aims to validate reactive dc magnetron sputtering of zirconium in Ar/N2 as an environmentally benign, annealing-free method to produce 22 nm-sized, highly crystalline, stoichiometric, electrically conductive, and plasmonic ZrN nanoparticles (NPs) of cubic shape and to load them into vacuum-compatible liquids of different chemical compositions (polyethylene glycol (PEG), paraffin, and pentaphenyl trimethyl trisiloxane (PTT)) in one step. The nanofluids demonstrate LSPR in the red/near-IR range that gives them a bluish color in transmittance. The nanofluids also demonstrate complex photoluminescence behavior such that ZrN NPs enhance the photoluminescence (PL) intensity of paraffin and PEG, whereas the PL of PTT remains almost invariable. Based on DFT calculations, different energetic barriers to charge transfer between ZrN and the organic molecules are suggested as the main factors that influence the observed optoelectronic response. Overall, our study provides a novel approach to the synthesis of transition metal nitride nanofluids in an environmentally friendly manner, deepens the understanding of the interactions between ZrN and organic molecules, and unveils new optoelectronic phenomena in such systems.

Work-function modification of Au and Ag surfaces upon deposition of self-assembled monolayers: influence of the choice of the theoretical approach and the thiol decomposition scheme.

We have characterized theoretically the work-function modifications of the (111) surfaces of gold and silver upon deposition of self-assembled monolayers based on methanethiol and trifluoromethanethiol. A comparative analysis is made between the experimental results and those obtained from two widely used approaches based on density functional theory. The contributions to the total work-function modifications are estimated on the basis of two decomposition schemes of the thiol molecules that have been proposed in the literature. The contributions are found to differ significantly between the two approaches, as do the corresponding adsorption energies.

Plasmonic Ag/Cu/PEG nanofluids prepared when solids meet liquids in the gas phase.

Since the time of Faraday's experiments, the optical response of plasmonic nanofluids has been tailored by the shape, size, concentration, and material of nanoparticles (NPs), or by mixing different types of NPs. To date, water-based liquids have been the most extensively investigated host media, while polymers, such as poly(ethylene glycol) (PEG), have frequently been added to introduce repulsive steric interactions and protect NPs from agglomeration. Here, we introduce an inverse system of non-aqueous nanofluids, in which Ag and Cu NPs are dispersed in PEG (400 g mol-1), with no solvents or chemicals involved. Our single-step approach comprises the synthesis of metal NPs in the gas phase using sputtering-based gas aggregation cluster sources, gas flow transport of NPs, and their deposition (optionally simultaneous) on the PEG surface. Using computational fluid dynamics simulations, we show that NPs diffuse into PEG at an average velocity of the diffusion front of the order of µm s-1, which is sufficient for efficient loading of the entire polymer bulk. We synthesize yellow Ag/PEG, green Cu/PEG, and blue Ag/Cu/PEG nanofluids, in which the color is given by the position of the plasmon resonance. NPs are prone to partial agglomeration and sedimentation, with a slower kinetics for Cu. Density functional theory calculations combined with UV-vis data and zeta-potential measurements prove that the surface oxidation to Cu2O and stronger electrostatic repulsion are responsible for the higher stability of Cu NPs. Adopting the De Gennes formalism, we estimate that PEG molecules adsorb on the NP surface in mushroom coordination, with the thickness of the adsorbed layer L < 1.4 nm, grafting density σ < 0.20, and the average distance between the grafted chains D > 0.8 nm. Such values provide sufficient steric barriers to retard, but not completely prevent, agglomeration. Overall, our approach offers an excellent platform for fundamental research on non-aqueous nanofluids, with metal-polymer and metal-metal interactions unperturbed by the presence of solvents or chemical residues.

Challenges for Incorporating Optical Switchability in Organic-Based Electronic Devices.

Transistors operate by controlling the current flowing from a source to a drain electrode via a third electrode (gate), thus giving access to a binary treatment (ON/OFF or 0/1) of the signal currently exploited in microelectronics. Introducing a second independent lever to modulate the current would allow for more complex logic functions amenable to a single electronic component and hence to new opportunities for advanced electrical signal processing. One avenue is to add this second dimension with light by incorporating photochromic molecules in current organic-based electronic devices. In this Spotlight, we describe different concepts that have been implemented in organic thin films and in molecular junctions as well as some pitfalls that have been highlighted thanks to theoretical modeling.

Insights into the growth of nanoparticles in liquid polyol by thermal annealing.

We report on the growth of metal- and metal-oxide based nanoparticles (NPs) in heated polyol solutions. For this purpose, NPs are produced by the sputtering of a silver, gold, or a copper target to produce either silver, gold, or copper oxide NPs in pentaerythritol ethoxylate (PEEL) which has been annealed up to 200 °C. The objective of the annealing step is the fine modulation of their size. Thus, the evolution of the NP size and shape after thermal annealing is explained according to collision/coalescence kinetics and the affinity between the metal-/metal-oxide and PEEL molecule. Moreover, highlights of few phenomena arising from the annealing step are described such as (i) the reduction of copper oxide into copper by the polyol process and (ii) the effective formation of carbon dots after annealing at 200 °C.

Enhanced Adhesion Energy at Oxide/Ag Interfaces for Low-Emissivity Glasses: Theoretical Insight into Doping and Vacancy Effects.

Low-emissivity glasses rely on multistacked architectures with a thin silver layer sandwiched between oxide layers. The mechanical stability of the silver/oxide interfaces is a critical parameter that must be maximized. Here, we demonstrate by means of quantum-chemical calculations that a low work of adhesion at interfaces can be significantly increased via doping and by introducing vacancies in the oxide layer. For the sake of illustration, we focus on the ZrO2(111)/Ag(111) interface exhibiting a poor adhesion in the pristine state and quantify the impact of introducing n-type dopants or p-type dopants in ZrO2 and vacancies in oxygen atoms (nVO; with n = 1, 2, 4, 8, 10, 16), zirconium atoms (mVZr; with m = 1, 2, 4, 8), or both (nVO + mVZr; with m/n = 1:2, 1:4, 2:2, 2:4). In the case of doping, interfacial electron transfer promotes an increase in the work of adhesion, from initially 0.16 to ∼0.8 J m-2 (n-type) and ∼2.0 J m-2 (p-type) at 10% doping. A similar increase in the work of adhesion is obtained by introducing vacancies, e.g., VO [VZr] in the oxide layer yields a work of adhesion of ∼1.5-2.0 J m-2 at 10% vacancies. An increase is also observed when mixing VO and VZr vacancies in a nonstoichiometric ratio (nVO + mVZr; with 2n ≠ m), while a stoichiometric ratio of VO and VZr has no impact on the interfacial properties.

Graphene Meets Ionic Liquids: Fermi Level Engineering via Electrostatic Forces.

Graphene-based two-dimensional (2D) materials are promising candidates for a number of different energy applications. A particularly interesting one is in next generation supercapacitors, where graphene is being explored as an electrode material in combination with room temperature ionic liquids (ILs) as electrolytes. Because the amount of energy that can be stored in such supercapacitors critically depends on the electrode-electrolyte interface, there is considerable interest in understanding the structure and properties of the graphene/IL interface. Here, we report the changes in the properties of graphene upon adsorption of a homologous series of alkyl imidazolium tetrafluoroborate ILs using a combination of experimental and theoretical tools. Raman spectroscopy reveals that these ILs cause n-type doping of graphene, and the magnitude of doping increases with increasing cation chain length despite the expected decrease in the density of surface-adsorbed ions. Molecular modeling simulations show that doping originates from the changes in the electrostatic potential at the graphene/IL interface. The findings described here represent an important step in developing a comprehensive understanding of the graphene/IL interface.

Noncovalent interactions between ([18]crown-6)-tetracarboxylic acid and amino acids: electrospray-ionization mass spectrometry investigation of the chiral-recognition processes.

Chiral recognition of enantiomers by host compounds is one of the most challenging topics in modern host-guest chemistry. Amongst the well-established methods, mass spectrometry (MS) is increasingly used nowadays, due to its low detection limit, short analysis time, and suitability for analyzing mixtures and for studying chiral effects in the gas phase. The development of electrospray-ionization (ESI) techniques provides an invaluable tool to study, in the gas phase, diastereoisomeric complex ions prepared from enantiomer ions and a chiral selector. This paper reports on an ESIMS and ESIMSMS study of the molecular mechanisms that intervene in the chiral-recognition phenomena observed between amino acids and a chiral crown ether. The modified crown ether, namely (+)-([18]crown-6)-2,3,11,12-tetracarboxylic acid, is used as the chiral selector when covalently bound on a stationary phase in liquid chromatography. This study was stimulated by the fact that, except with threonine and proline, consistent elution orders were observed, which indicates that the D enantiomers interact more strongly with the chiral selector than the L enantiomers. For proline, the lack of a primary amino group is likely to be responsible for the nonresolution of the two forms, whereas the second stereogenic center on threonine could explain the reversed elution order. In light of those observations, we performed mass spectrometry experiments to understand more deeply the enantiomeric recognition phenomena, both in solution by the enantiomer-labeled guest method and in the gas phase by gas-phase ligand-exchange ion/molecule reactions. The results have been further supported by quantum chemical calculations. One of the most interesting features of this work is the identification of a nonspecific interaction between proline and the crown ether upon ESIMS analysis.

Which Oxide for Low-Emissivity Glasses? First-Principles Modeling of Silver Adhesion.

Density functional theory (DFT) calculations were performed to assess the work of adhesion of silver layers deposited on metal oxide surfaces differing by their chemical nature (ZnO, TiO2, SnO2, and ZrO2) and their crystallographic face. The calculated work of adhesion values range from ∼0 to 3 J m-2 and are shown to originate from the interplay between ionic (associated with charge transfer at the interface) and covalent (as probed by atomic bond orders between silver and the metal oxide atoms) interactions. The results are discussed in the context of the design of silver/metal oxide interfaces for low-emissivity glasses.

Hierarchical self-assembly of enantiopure and racemic helicenes at the liquid/solid interface: from 2D to 3D.

The performance of organic nanostructures is closely related to the organization of the functional molecules. Frequently, molecular chirality plays a central role in the way molecules assemble at the supramolecular level. Herein we report the hierarchical self-assembly of benzo-fused tetrathia[7]helicenes on solid surfaces, from a single surface-bound molecule to well-defined microstructures, using a combination of various characterization techniques assisted by molecular modeling simulations. Similarities as well as discrepancies are revealed between homochiral and heterochiral aggregations by monitoring the hierarchical nucleation of helicenes on surfaces, where the impact of enantiopurity, concentration and adsorbate-substrate interaction on molecular organization are disclosed.

Defect-driven interfacial electronic structures at an organic/metal-oxide semiconductor heterojunction.

The electronic structure of the hybrid interface between ZnO and the prototypical organic semiconductor PTCDI is investigated via a combination of ultraviolet and X-ray photoelectron spectroscopy (UPS/XPS) and density functional theory (DFT) calculations. The interfacial electronic interactions lead to a large interface dipole due to substantial charge transfer from ZnO to 3,4,9,10-perylenetetracarboxylicdiimide (PTCDI), which can be properly described only when accounting for surface defects that confer ZnO its n-type properties.

Self-assembly of an asymmetrically functionalized [6]helicene at liquid/solid interfaces.

STM brings to light chirality aspects of the self-assembly of a functionalized helicene at the interface between a liquid and the solid substrates, gold and graphite. This reveals conditions for conglomerate formation.

Large work function shift of gold induced by a novel perfluorinated azobenzene-based self-assembled monolayer.

Tune it with light! Self-assembled monolayers on gold based on a chemisorbed novel azobenzene derivative with a perfluorinated terminal phenyl ring are prepared. The modified substrate shows a significant work function increase compared to the bare metal. The photo-conversion between trans and cis isomers chemisorbed on the surface shows great perspectives for being an accessible route to tune the gold properties by means of light.