Evaluation of exposure to phthalate esters and DINCH in urine and nails from a Norwegian study population.

Phthalate esters (PEs) and 1,2-cyclohexane dicarboxylic acid diisononyl ester (DINCH) used as additives in numerous consumer products are continuously released into the environment, leading to subsequent human exposure which might cause adverse health effects. The human biomonitoring approach allows the detection of PEs and DINCH in specific populations, by taking into account all possible routes of exposure (e.g. inhalation, transdermal and oral) and all relevant sources (e.g. air, dust, personal care products, diet). We have investigated the presence of nine PE and two DINCH metabolites and their exposure determinants in 61 adult residents of the Oslo area (Norway). Three urine spots and fingernails were collected from each participant according to established sampling protocols. Metabolite analysis was performed by LC-MS/MS. Metabolite levels in urine were used to back-calculate the total exposure to their corresponding parent compound. The primary monoesters, such as monomethyl phthalate (MMP, geometric mean 89.7ng/g), monoethyl phthalate (MEP, 104.8ng/g) and mono-n-butyl phthalate (MnBP, 89.3ng/g) were observed in higher levels in nails, whereas the secondary bis(2-ethylhexyl) phthalate (DEHP) and DINCH oxidative metabolites were more abundant in urine (detection frequency 84-100%). The estimated daily intakes of PEs and DINCH for this Norwegian population did not exceed the established tolerable daily intake and reference doses, and the cumulative risk assessment for combined exposure to plasticizers with similar toxic endpoints indicated no health concerns for the selected population. We found a moderate positive correlation between MEP levels in 3 urine spots and nails (range: 0.56-0.68). Higher frequency of personal care products use was associated with greater MEP concentrations in both urine and nail samples. Increased age, smoking, wearing plastic gloves during house cleaning, consuming food with plastic packaging and eating with hands were associated with higher levels in urine and nails for some of the metabolites. In contrast, frequent hair and hand washing was associated with lower urinary levels of monoisobutyl phthalate (MiBP) and mono(2-ethyl-5-hydroxyhexyl) phthalate (5-OH-MEHP), respectively.

Multi-pathway human exposure assessment of phthalate esters and DINCH.

Phthalate esters are substances mainly used as plasticizers in various applications. Some have been restricted and phased out due to their adverse health effects and ubiquitous presence, leading to the introduction of alternative plasticizers, such as DINCH. Using a comprehensive dataset from a Norwegian study population, human exposure to DMP, DEP, DnBP, DiBP, BBzP, DEHP, DINP, DIDP, DPHP and DINCH was assessed by measuring their presence in external exposure media, allowing an estimation of the total intake, as well as the relative importance of different uptake pathways. Intake via different uptake routes, in particular inhalation, dermal absorption, and oral uptake was estimated and total intake based on all uptake pathways was compared to the calculated intake from biomonitoring data. Hand wipe results were used to determine dermal uptake and compared to other exposure sources such as air, dust and personal care products. Results showed that the calculated total intakes were similar, but slightly higher than those based on biomonitoring methods by 1.1 to 3 times (median), indicating a good understanding of important uptake pathways. The relative importance of different uptake pathways was comparable to other studies, where inhalation was important for lower molecular weight phthalates, and negligible for the higher molecular weight phthalates and DINCH. Dietary intake was the predominant exposure route for all analyzed substances. Dermal uptake based on hand wipes was much lower (median up to 2000 times) than the total dermal uptake via air, dust and personal care products. Still, dermal uptake is not a well-studied exposure pathway and several research gaps (e.g. absorption fractions) remain. Based on calculated intakes, the exposure for the Norwegian participants to the phthalates and DINCH was lower than health based limit values. Nevertheless, exposure to alternative plasticizers, such as DPHP and DINCH, is expected to increase in the future and continuous monitoring is required.

PM(10) source characterization at urban and highway roadside locations.

Levels of PM(10) were measured at two different roadside locations in the Stockholm region in Sweden, one highway south of Stockholm and one urban street canyon in the center of the city. PM(10) samples were taken during six separate campaigns over one full year, and analyzed for 29 metals, in order to help characterize sources of PM(10). Five contributing factors were identified by multivariate receptor modeling using positive matrix factorization. Factors were classified, based on their seasonal variation and published data on metal composition of different sources, as: 1) resuspension; 2) vehicle derived; 3) road salt; 4) regional combustion and 5) long-range transport. Resuspension and long-range transport were shown to be important contributors to the PM(10) levels at both sites. In fact, long-range transport was the main contributor to the PM(10) levels at the highway roadside. The vehicle source was only of major importance at the urban roadside, where it frequently contributed between 10 and 20 microg m(-3). Brake wear was an important component in the vehicle source. Vehicle exhaust was not detected as a separate source and was not identified as a major source for PM(10). To our knowledge, this is the first study identifying brake wear as a major source of PM(10) during urban driving.

Probing the relationship between external and internal human exposure of organophosphate flame retardants using pharmacokinetic modelling.

Human external exposure (i.e. intake) of organophosphate flame retardants (PFRs) has recently been quantified, but no link has yet been established between external and internal exposure. In this study, we used a pharmacokinetic (PK) model to probe the relationship between external and internal exposure data for three PFRs (EHDPHP, TNBP and TPHP) available for a Norwegian cohort of 61 individuals from 61 different households. Using current literature on metabolism of PFRs, we predicted the metabolite serum/urine concentrations and compared it to measured data from the study population. Unavailable parameters were estimated using a model fitting approach (least squares method) after assigning reasonable constraints on the ranges of fitted parameters. Results showed an acceptable comparison between PK model estimates and measurements (<10-fold deviation) for EHDPHP. However, a deviation of 10-1000 was observed between PK model estimates and measurements for TNBP and TPHP. Sensitivity and uncertainty analysis on the PK model revealed that EHDPHP results showed higher uncertainty than TNBP or TPHP. However, there are indications that (1) current biomarkers of exposure (i.e. assumed metabolites) for TNBP and TPHP chemicals might not be specific and ultimately affecting the outcome of the modelling and (2) some exposure pathways might be missing. Further research, such as in vivo laboratory metabolism experiments of PFRs including identification of better biomarkers will reduce uncertainties in human exposure assessment.

Human exposure, hazard and risk of alternative plasticizers to phthalate esters.

Alternative plasticizers to phthalate esters have been used for over a decade, but data regarding emissions, human exposure and health effects are limited. Here we review 20 alternative plasticizers in current use and their human exposure, hazard and risk. Physicochemical properties are collated for these diverse alternatives and log KOW values range over 15 orders of magnitude and log KAW and log KOA values over about 9 orders of magnitude. Most substances are hydrophobic with low volatility and are produced in high volumes for use in multiple applications. There is an increasing trend in the total use of alternative plasticizers in Sweden compared to common phthalate esters in the last 10 years, especially for DINCH. Evaluative indoor fate modeling reveals that most alternatives are distributed to vertical surfaces (e.g. walls or ceilings). Only TXIB and GTA are predicted to be predominantly distributed to indoor air. Human exposure data are lacking and clear evidence for human exposure only exists for DEHT and DINCH, which show increasing trends in body burdens. Human intake rates are collected and compared with limit values with resulting risk ratios below 1 except for infant's exposure to ESBO. PBT properties of the alternatives indicate mostly no reasons for concern, except that TEHPA is estimated to be persistent and TCP toxic. A caveat is that non-standard toxicological endpoint results are not available and, similar to phthalate esters, the alternatives are likely "pseudo-persistent". Key data gaps for more comprehensive risk assessment are identified and include: analytical methods to measure metabolites in biological fluids and tissues, toxicological information regarding non-standard endpoints such as endocrine disruption and a further refined exposure assessment in order to consider high risk groups such as infants, toddlers and children.

Physical-chemical properties and evaluative fate modelling of 'emerging' and 'novel' brominated and organophosphorus flame retardants in the indoor and outdoor environment.

Several groups of flame retardants (FRs) have entered the market in recent years as replacements for polybrominated diphenyl ethers (PBDEs), but little is known about their physical-chemical properties or their environmental transport and fate. Here we make best estimates of the physical-chemical properties and undertake evaluative modelling assessments (indoors and outdoors) for 35 so-called 'novel' and 'emerging' brominated flame retardants (BFRs) and 22 organophosphorus flame retardants (OPFRs). A QSPR (Quantitative Structure-Property Relationship) based technique is used to reduce uncertainty in physical-chemical properties and to aid property selection for modelling, but it is evident that more, high quality property data are required for improving future assessments. Evaluative modelling results show that many of the alternative FRs, mainly alternative BFRs and some of the halogenated OPFRs, behave similarly to the PBDEs both indoors and outdoors. These alternative FRs exhibit high overall persistence (Pov), long-range transport potential (LRTP) and POP-like behaviour and on that basis cannot be regarded as suitable replacements to PBDEs. A group of low molecular weight alternative BFRs and non-halogenated OPFRs show a potentially better environmental performance based on Pov and LRTP metrics. Results must be interpreted with caution though since there are significant uncertainties and limited data to allow for thorough model evaluation. Additional environmental parameters such as toxicity and bioaccumulative potential as well as functionality issues should be considered in an industrial substitution strategy.

Stockholm Arlanda Airport as a source of per- and polyfluoroalkyl substances to water, sediment and fish.

Fire training facilities are potential sources of per- and polyfluoroalkyl substances (PFASs) to the nearby environment due to the usage of PFAS-containing aqueous fire-fighting foams (AFFFs). The multimedia distribution of perfluoroalkyl carboxylates (PFCAs), perfluoroalkyl sulfonates (PFSAs), perfluorooctanesulfonamide (PFOSA) and 6:2 fluorotelomer sulfonate (FTSA) was investigated near a fire training facility at Stockholm Arlanda Airport in Sweden. The whole body burden of PFASs in European perch (Perca fluviatilis) was 334±80µg absolute and was distributed as follows: Gonad>liver≈muscle>blood>gill. The bioconcentration factor (BCF) and sediment/water partition coefficient (Kd) increased by 0.6-1.7 and 0.2-0.5 log units, respectively, for each additional CF2 moiety for PFCAs and PFSAs. PFAS concentrations in water showed no significant decreasing trend between 2009 and 2013 (p>0.05), which indicates that Stockholm Arlanda Airport may be an important source for long-term contamination of the nearby environment with PFASs.

Emissions of two phthalate esters and BDE 209 to indoor air and their impact on urban air quality.

Estimated emissions of decabrominated diphenyl ether (BDE 209) and the two phthalate esters diethylhexyl phthalate (DEHP) and diisononyl phthalate (DINP) to indoor air in the Stockholm conurbation, Sweden were used to assess the contribution of chemical outflows from the indoor environment to urban outdoor air pollution for these substances, by applying the recently developed Stockholm MUltimedia URban fate (SMURF) model. Emission rates of DINP from PVC materials were measured and published emission rates of DEHP were adapted to Swedish conditions. These were used as input to the model, as well as recently reported estimates of BDE 209 emissions to indoor air in Stockholm. Model predicted concentrations were compared to empirical monitoring data obtained from the literature and from additional measurements of phthalates in ventilation outlets and urban air performed in the current study. The predicted concentrations of the phthalates DINP and DEHP in indoor air and dust were within a factor of 1.5-10 of the measured concentrations. For BDE 209, predicted indoor concentrations were within the measured ranges, but measured concentrations showed a much larger variability. An adjusted emission scenario to better fit observed concentrations indoors was employed for DEHP and final outcomes resulted in estimated indoor emissions of 250 (50-1250), 2.9 (0.58-15), and 0.068 (0.014-0.34) kg year(-1) for DEHP, DINP and BDE 209. These emissions could not explain the observed concentrations in urban air of the phthalates, suggesting an underestimation of background inflow or existence of additional sources in the outdoor environment. For BDE 209, the assessment indicates that the Stockholm indoor environment contributes about 25% to the air pollution load in inflowing background air, but additional monitoring data in urban air are needed to confirm this conclusion.

Emissions and fate of brominated flame retardants in the indoor environment: a critical review of modelling approaches.

This review explores the existing understanding and the available approaches to estimating the emissions and fate of semi-volatile organic compounds (SVOCs) and in particular focuses on the brominated flame retardants (BFRs). Volatilisation, an important emission mechanism for the more volatile compounds can be well described using current emission models. More research is needed, however, to better characterise alternative release mechanisms such as direct material-particle partitioning and material abrasion. These two particle-mediated emissions are likely to result in an increased chemical release from the source than can be accounted for by volatilisation, especially for low volatile compounds, and emission models need to be updated in order to account for these. Air-surface partitioning is an important fate process for SVOCs such as BFRs however it is still not well characterised indoors. In addition, the assumption of an instantaneous air-particle equilibrium adopted by current indoor fate models might not be valid for high-molecular weight, strongly sorbing compounds. A better description of indoor particle dynamics is required to assess the effect of particle-associated transport as this will control the fate of low volatile BFRs. We suggest further research steps that will improve modelling precision and increase our understanding of the factors that govern the indoor fate of a wide range of SVOCs. It is also considered that the appropriateness of the selected model for a given study relies on the individual characteristics of the study environment and scope of the study.

The effect of the indoor environment on the fate of organic chemicals in the urban landscape.

To assess the effect of the indoor environment on the urban fate of organic chemicals, an 8-compartment indoor-inclusive steady state multimedia chemical fate model was developed. The model includes typical urban compartments (air, soil, water, sediment, and urban film) and a novel module representing a generic indoor environment. The model was parameterized to the municipality of Stockholm, Sweden and applied to four organic chemicals with different physical-chemical characteristics and use patterns: formaldehyde, 2,4,6-tribromophenol, di-ethylhexylphthalate and decabromodiphenyl ether. The results show that emissions to indoor air may increase the steady state mass and residence time in the urban environment by a factor of 1.1 to 22 for the four chemicals, compared to if emissions are assigned to outdoor air. This is due to the nested nature of the indoor environment, which creates a physical barrier that prevents chemicals from leaving the urban system with outflowing air. For DEHP and BDE 209, the additional partitioning to indoor surfaces results in a greater importance of the indoor removal pathways from surfaces. The outdoor environmental concentrations of these chemicals are predicted to be lower if emitted to indoor air than if emitted to outdoor air because of the additional indoor removal pathways of dust and indoor film, leading to loss of chemical from the system. For formaldehyde and 2,4,6-TBP outdoor environmental concentrations are not affected by whether the release occurs indoors or outdoors because of the limited partitioning to indoor surfaces. A sensitivity analysis revealed that there appears to be a relationship between logK(OA) and the impact of the ventilation rate on the urban fate of organic chemicals.

Phthalates and nonylphenols in urban runoff: Occurrence, distribution and area emission factors.

The urban water system is believed to be an important sink for the nonpoint-source pollutants nonylphenols and phthalates. The presence of nonylphenols (NPs), nonylphenol ethoxylates (NPEOs), and eight phthalates was analyzed in urban stormwater and sediment from three catchment areas in Sweden. Emission loads for these substances were then calculated for a specific urban catchment area. In addition, substance distribution in road runoff passing through a sedimentation facility was modeled using a modified QWASI-model for chemical fate. High concentrations of DEHP, DIDP and DINP (