Implementation of a clinical decision support system for the optimization of antidiabetic drug orders by pharmacists.

AIMS: The objective of the study was to describe the impact of a clinical decision support system (CDSS) on antidiabetic drug management by clinical pharmacists for hospitalized patients with T2DM. METHODS: We performed a retrospective, single-centre study in a teaching hospital, where clinical pharmacists analysed prescriptions and issued pharmacist interventions (PIs) through a computerized physician order entry (CPOE) system. A CDSS was integrated into the pharmacists' workflow in July 2019. We analysed PIs during 2 periods of interest: one before the introduction of the CDSS (from November 2018 to April 2019, PIs issued through the CPOE alone) and one afterwards (from November 2020 to April 2021, PIs issued through the CPOE and/or the CDSS). The study covered nondiabetology wards as endocrinology, diabetes and metabolism departments were not computerized at the time of the study. RESULTS: There were 203 PIs related to antidiabetic drugs in period 1 and 319 in period 2 (a 57.5% increase). Sixty-four of the 319 PIs were generated by the CDSS. Noncompliance/contraindication was the main problem identified by the CDSS (41 PIs, 68.4%), and 57.8% led to discontinuation of the drug. Most of the PIs issued through the CDSS corresponded to orders that had not been flagged up by clinical pharmacists using the CPOE. Conversely, most alerts about indications that were not being treated were detected by the clinical pharmacists using the CPOE and not by the CDSS. CONCLUSION: Use of CDSS by clinical pharmacists improved antidiabetic drug management for hospitalized patients with T2DM. The CDSS might add value to diabetes care in nondiabetology wards by decreasing the frequency of potentially inappropriate prescriptions and adverse drug reactions.

Evaluation of cancer drug infusion devices prior to the implementation of a compounding robot.

INTRODUCTION: Compounding robots are increasingly being implemented in hospital pharmacies. In our hospital, the recent acquisition of a robot (RIVATM, ARxIUM) for intravenous cancer drug compounding obliged us to replace the previously used infusion devices. The objective of the present study was to assess and qualify the new intravenous sets prior to their use in our hospital and prior to the implementation of the compounding robot. MATERIALS AND METHODS: The ChemoLockTM (ICU Medical) was compared with the devices used previously for compounding (BD PhaSealTM, Becton-Dickinson) and infusion (Connect-ZTM, Codan Medical). The connection/disconnection of infusion devices to/from 50 mL infusion bags was tested with a dynamometer (Multitest-i, Mecmesin). Leakage contamination was visualized by a methylene blue assay and was quantified in simulated pump infusions with 20 mg/mL quinine sulfate (N = 36/group); after the analytical assay had been validated, quinine was detected by UV-spectrophotometry at 280 and 330 nm. Groups were compared using chi-squared or Mann-Whitney U tests. RESULTS: The connection/disconnection test showed that although all the devices complied with the current standard, there was a statistically significant difference in the mean ± standard deviation compression force (51.5 ± 11.6 for the Connect-ZTM vs. 60.3 ± 11.7 for the ChemoLockTM; p = 0.0005). Leaks were detected in 32 (29.1%) of the 110 tests of the ChemoLockTM. The contamination rates were also significantly different: 13.9% for the BD PhaSealTM versus 75.0% for the ChemoLockTM; p < 0.0001). DISCUSSION/CONCLUSION: Our results showed that the new infusion device complied with current standards. However, the presence of contamination emphasizes the need for operators to use the recommended personal protective equipment. Further studies of contamination with cancer drugs are required.

[Monitoring student skills during community pharmacy placements: Retrospective analysis of dashboards]. / Suivi des compétences des étudiants au cours du stage de pratique professionnelle en pharmacie officinale : analyse rétrospective des tableaux de bord.

OBJECTIVES: The aim of this work is to describe the skills considered to have been acquired by students during their professional practice placements, with particular emphasis on skills related to the new roles of pharmacists. METHODS: Skills are monitored during the professional practice placement using the dashboard included in the guide designed by the college of community pharmacy placement supervisors. Each skill is assessed at three points during the placement. The assessment is carried out jointly by the student and his or her placement supervisor using the dashboard, which is available online in the form of a form on the Moodle platform. We conducted a retrospective analysis of the professional practice placement dashboards for the 2018-2019 to 2022-2023 academic years. RESULTS: The response levels for the three phases of the dashboard are very high, always exceeding 90% of students completing their placement. All of the scorecards show a progression in the acquisition of skills throughout the placement and enable certain skills to be distinguished in terms of their level of acquisition at the end of the placement. The focus on pharmaceutical interviews shows that the rate of acquisition of this skill is over 85% in 2021 and 2023, the years in which the subject of the public health project was the performance and quality assurance of pharmaceutical interviews in pharmacies, whereas it is no higher than 38% in the other years. CONCLUSIONS: Our work shows the contribution of the professional practice placement dashboard in monitoring student progress. The analysis carried out reveals different levels of mastery at the start of the placement and different levels of progress depending on the skills. It also reveals the contribution made by the intervention on the content of the placement, particularly in terms of the acquisition of certain skills, especially those related to new tasks such as conducting pharmaceutical interviews.

Migration of di(2-ethylhexyl) phthalate, diisononylcyclohexane-1,2-dicarboxylate and di(2-ethylhexyl) terephthalate from transfusion medical devices in labile blood products: A comparative study.

BACKGROUND AND OBJECTIVES: Polyvinyl chloride (PVC) plasticized with di(2-ethylhexyl) phthalate (DEHP) is a widely used material for medical transfusion devices. Not covalently bound to PVC, DEHP can migrate into blood products during storage. Recognized as an endocrine disruptor and raising concerns about its potential carcinogenicity and reprotoxicity, DEHP is gradually being withdrawn from the medical device market. Therefore, the use of alternative plasticizers, such as diisononylcyclohexane-1,2-dicarboxylate (DINCH) and di(2-ethylhexyl) terephthalate (DEHT), as potential candidates for the replacement of DEHP in medical transfusion devices has been investigated. The purpose of this study was to evaluate the quantity of PVC-plasticizers in the blood components according to their preparation, storage conditions and in function of the plasticizer. MATERIALS AND METHODS: Whole blood was collected, and labile blood products (LBPs) were prepared by the buffy-coat method with a PVC blood bag plasticized either with DEHP, DINCH or DEHT. DINCH and DEHT equivalent concentrations were quantified in LBPs by liquid chromatography-tandem mass spectrometry or coupled with UV and compared to DEHP equivalent concentrations. RESULTS: The plasticizer equivalent concentration to which a patient is exposed during a transfusion depends on the preparation of LBPs as well as their storage conditions, that is, temperature and storage time. At day 1, for all LBPs, the migration of DEHP is 5.0 and 8.5 times greater than DINCH and DEHT, respectively. At the end of the 49 days storage period, the DEHP equivalent concentration in red blood cells concentrate is statistically higher when compared to DINCH and DEHT, with maximal values of 1.85, 1.13 and 0.86 µg/dm2 /mL, respectively. CONCLUSION: In addition to lower toxicity, transfused patients using PVC-DEHT or PVC-DINCH blood bags are less exposed to plasticizers than using PVC-DEHP bags with a ranging exposure reduction from 38.9% to 87.3%, due to lower leachability into blood components.

Impact of the pathogen inactivation process on the migration of di(2-ethylhexyl) phthalate from plasma bags.

BACKGROUND AND OBJECTIVES: Di(2-ethylhexyl) phthalate (DEHP) is a toxic plasticizer that is commonly used in the manufacture of polyvinyl chloride (PVC) blood bags. It is well known that DEHP can migrate from a medical device into the blood plasma. For safety reasons, pathogens in plasma must be inactivated; however, this process may increase DEHP migration. Here, we assessed the impact of illumination-based pathogen inactivation on the migration of DEHP from PVC bags into plasma. MATERIALS AND METHODS: Pairs of native PVC-DEHP plasma bags were pooled. Each pool was then split into a pathogen-inactivated bag and a control bag. After illumination, the plasma concentrations of DEHP and its main metabolite (mono(2-ethylhexyl) phthalate, MEHP) in each bag were assayed and compared using liquid chromatography-tandem mass spectrometry. Concentrations were evaluated in repeated-measures, two-way analyses of variance. RESULTS: The MEHP concentration was significantly associated with storage but not with illumination (p = 0.0001). The DEHP concentration stayed constant throughout the storage period. The DEHP equivalent concentration (corresponding to the overall plasticizer migration rate into plasma) was not significantly associated with illumination (p = 0.3) or storage (p = 0.09; mean ± standard deviation of the mean DEHP concentration for all conditions: 147.9 ± 11.3 µg/ml). CONCLUSION: Illumination-based inactivation of pathogens in plasma did not increase the DEHP equivalent concentration, relative to control (non-inactivated) plasma.

Strategies to prevent drug incompatibility during simultaneous multi-drug infusion in intensive care units: a literature review.

PURPOSE: Drug protocols in intensive care units may require the concomitant administration of many drugs as patients' venous accesses are often limited. A major challenge for clinicians is to limit the risk of simultaneously infusing incompatible drugs. Incompatibilities can lead to the formation of particles and inactivation of drugs, whose consequences on the body have already been indicated. Our objective was to assess current strategies to counter the risk of incompatible infusions and control the resulting clinical consequences. METHODS: This review was independently conducted by three investigators in respect of the PRISMA statement. Three online databases were consulted. Full-text articles, notes, or letters written in English or French, published or in press between the 1990s and the end of February 2020, with clinical study design, were eligible. Parameters of interest were mainly number and size of particles, and a number of observed/avoided incompatibilities. RESULTS: All in all, 382 articles were screened, 17 meeting all the acceptance criteria. The strategies outlined and assessed were filtration, the use of multi-lumen devices, the purging of infusion lines, incompatibility tables and databases, and the use of standard operating procedures. CONCLUSION: Although many strategies have been developed in recent years to address drug incompatibility risks, clinical data is still lacking. All studies with in vitro design were excluded although some current innovative strategies, like niosomes, should be considered and studied by means of clinical data in the future.

Optimising insulin aspart practices in a neonatal intensive care unit: a clinical and pharmaco-technical study.

Neonatal hyperglycaemia is frequent and requires insulin therapy. To resolve the difficulties encountered by paediatricians in stabilising glycaemia, the preparation and administration of insulin aspart were assessed and optimised. After high-performance liquid chromatography (HPLC-UV) assessment of insulin aspart preparations made according to the old protocol, a new protocol was drawn up. Dosage reliability of solutions prepared by paediatric nurses was evaluated by HPLC-UV. This new protocol was also tested in a Y-infusion situation and the need to saturate infusion tubes assessed. Wide deviations in insulin aspart concentrations were found between theoretical concentrations and preparations made according to the old protocol. Glycated insulin aspart was found in the majority of these preparations. The new protocol significantly reduced the variability of data and relative deviations around the target value. It also eliminated the formation of glycated insulin even in the case of co-infusion of parenteral nutrition and confirmed the need to saturate infusion tubes.Conclusion: The revision of the insulin therapy protocol reduced the variability of insulin concentration in preparations and avoided the administration of glycated derivatives potentially toxic for neonates. What is Known: • Insulin preparation in NICUs is a risky task because it is a two-step preparation • Diluted in dextrose, insulin aspart is unstable, with formation of potentially toxic glycated derivatives What is New: • This work proposes a new insulin therapy protocol validated by HPLC-UV for NICU allowing suppression of the formation of glycated insulin, to significantly reduce deviations from theoretical concentrations and to limit adsorption phenomena • This protocol is validated in case of co-infusion of parenteral nutrition.

Case report: risk of skin necrosis related to injectable vancomycin in critically ill newborn infants.

BACKGROUND: Vancomycin is commonly used as part of empiric antibiotic therapy in the preterm infants who develop signs and symptoms of infection. Although skin necrosis has been noted to occur following injection of vancomycin into a peripheral vein in an adult patient, this complication has not been previously described in a preterm infant. CASE PRESENTATION: We report the case of a very low birthweight male infant born at 30 weeks gestational age who developed skin necrosis, most likely as a complication of vancomycin administration via a peripheral venous catheter. The immature skin and endothelial cells of this preterm infant may have increased the risk of drugs related venous and skin toxicity. In this case, assumption of a cumulative toxicity with other drugs administered concomitantly via the same catheter can't be excluded. CONCLUSIONS: To prevent the risk of skin damage, we advocate that in newborn infants, the administration of vancomycin should be limited to a concentration of < 2.5 mg/mL via a peripheral intravenous catheter if a central venous catheter is not available.

Fastidious chemical decontamination after cyclophosphamide vial breakage in a compounding unit.

An important amount of cytotoxic drug may accumulate in the workplace following the breakage of a vial containing an anticancer drug. Thanks to the monthly monitoring of the surface contamination in our compounding unit, a strong increase of cyclophosphamide contamination was highlighted in the storage area following the breakage of the vial, despite application of the emergency procedure. This study presents an analysis of chemical decontamination in the context of massive contamination. Samples were taken on the floor and on the caster of a storage shelf where the vial broke. The residual contamination was measured with a liquid chromatography-mass spectrometry/mass spectrometry method. An admixture of 10-2 M sodium dodecyl sulfate and 70% isopropanol (SDS/IPA 8:2) was selected as the decontamination solution. High amounts of cyclophosphamide were retrieved. The initial contamination on the floor was over 20 ng/cm2. Three decontaminations with SDS/IPA were carried out at Day 61, Day 68, and Day 71. The amount of cyclophosphamide decreased to 0.45 ng/cm2 at D134. However, high values were still measured on the caster despite successive decontaminations, with a maximal value of 19.78 ng/cm2 observed at Day 106. Continuous monitoring in our unit led us to highlight the inefficiency of our emergency procedure to eliminate high cyclophosphamide contamination. The procedure involving the SDS/IPA admixture was more efficient on the floor compared to the caster, which is a different surface type and porosity. This work highlights the importance of improving the procedures of incident management using contamination monitoring and repeated decontamination procedures adapted to different contaminants and surfaces.

Polypharmacy in older patients: identifying the need for support by a community pharmacist.

BACKGROUND: The community pharmacist is a key player in medication reviews of older outpatients. However, it is not always clear which individuals require a medication review. The objective of the present study was to identify high-priority older patients for intervention by a community pharmacist. METHODS: As part of their final-year placement in a community pharmacy, pharmacy students conducted 10 interviews each with older adults (aged 65 or over) taking at least five medications daily. The student interviewer also offered to examine the patient's home medicine cabinet. An interview guide was developed by an expert group to assess the difficulties in managing and taking medications encountered by older patients. RESULTS: The 141 students interviewed a total of 1370 patients (mean age: 81.5; mean number of medications taken daily: 9.3). Of the 1370 interviews, 743 (54.2%) were performed in the patient's home, and thus also included an examination of the home medicine cabinet. Adverse events were reported by 566 (42.0%) patients. A total of 378 patients (27.6%) reported difficulties in preparing, administering and/or swallowing medications. The inspections of medicine cabinets identified a variety of shortcomings: poorly located cabinets (in 15.0% of inspections), medication storage problems (21.7%), expired medications (40.7%), potentially inappropriate medications (15.0%), several different generic versions of the same drug (19.9%), and redundant medications (20.4%). CONCLUSIONS: In a community pharmacy setting, high-priority older patients for intervention by a community pharmacist can be identified by asking simple questions about difficulties in managing, administering, taking or storing medications.

Efficiency of degradation or desorption methods in antineoplastic drug decontamination: A critical review.

Although considerable efforts have been made over the last 40 years, occupational exposure to antineoplastic drugs is still a daily concern, since eradicating such contamination from workplaces seems unattainable. Considerable data are currently available on the risks associated with their use at work. Hospital facilities are often cleaned with marketed antimicrobials whose chemical decontamination efficacy certainly differs but remains unknown. To keep compounding facilities sterile, alcohol-based solutions are frequently used but with very limited efficiency. It would be particularly useful if a decontamination method could be added to the means already available so that all conventional antineoplastic drug contamination could be removed. Several degradation methods or desorption methods have previously been experimented, with varying success. They have never been compared or discussed in terms either of efficiency or usability. This review aims to analyse and discuss the results of each degradation or decontamination procedure and to compare them. This should facilitate selection of the method to be implemented in daily practice.

Quality control and stability of ketamine, remifentanil, and sufentanil syringes in a pediatric operating theater.

BACKGROUND: Transforming a drug from its commercial form into a ready-to-use drug is common practice, especially in pediatrics. However, the risk of compounding error is real and data on drug stability in practice are not always available. AIMS: The aim of this study was to assess, in real conditions, both the error rate and stability of three drugs: ketamine, remifentanil, and sufentanil. METHODS: A new rapid and easy-to-use high-performance liquid chromatography method with a diode array detector has been developed and validated to quantify these drugs and detect their degradation products. Over a 1-month period, 151 syringes were collected in the postanesthesia care unit. Seventy-three were stock solution syringes containing a 10-fold dilution of commercial drugs and 78 were serial dilution syringes made from successive dilutions of stock solutions. A comparison between real and expected concentrations as well as the detection of possible degradation products was carried out on these samples. RESULTS: All stock solution syringes had good chemical stability throughout the working day. A 4-µg/mL remifentanil serial dilution syringe, however, had to be discarded as a degradation peak was detected. Overall, 15.3% (95% CI, 9.5-21.1%) of syringes had a drug concentration outside the ±10% acceptability range, that is, 11.0% (95% CI, 3.7-18.2%) and 19.5% (95% CI, 10.6%-28.4%) of stock and diluted syringes respectively, with drug amounts ranging from -25.3% to 22.0%. The highest error rates were observed with sufentanil syringes: 20% and 28% for stock solution and serial dilution, respectively. CONCLUSION: The study shows that stock solution syringes prepared in advance are chemically stable throughout the day, unlike certain serial dilution syringes, indicating that the latter should be prepared just before administration to ensure chemical stability. Our results show that the error rate for serial dilution syringes is twice that of stock solution. Different safety measures are under discussion and have to be further studied.

Acute kidney injury after high dose etoposide phosphate: A retrospective study in children receiving an allogeneic hematopoetic stem cell transplantation.

BACKGROUND: Etoposide phosphate (EP; single injection, 60 mg/kg) followed by total body irradiation (TBI) at 12 Gy has been used as an allogeneic stem cell transplantation (allo-SCT) conditioning regimen for children since 2010. In our institution, EP has been suspected of leading to acute nephrotoxicity. The aim of this study was to assess the potential renal toxicity of EP in this context. MATERIALS AND METHODS: A retrospective study was carried out on children hospitalized between 2007 and 2015 for allo-SCT with TBI-based myeloablative conditioning associated with cyclophosphamide (CY, 60 mg/kg/day × 2 days) or EP. The primary endpoint of the study was the occurrence of acute kidney injury (AKI). Additional endpoints were time to recovery for children with AKI, survival, and treatment-related mortality. RESULTS: Thirty-five patients were analyzed (CY: 22 vs. EP: 13). AKI occurred more frequently in the EP group than in the CY one (69% vs. 27%, adjusted odds ratio 6.0, 95% confidence interval [CI] [1.145; 31.445], P = 0.03). The median time to recovery was estimated at 3 days, 95% CI (2; 17), with CY and 11 days 95% CI (5; 18) with EP (adjusted hazard ratio of recovery for EP vs. CY 0.262, 95% CI [0.071; 0.969], P = 0.04). No significant difference was highlighted between the two treatments for survival or for treatment-related mortality. DISCUSSION: This study shows that EP at high dosage or one of its excipients is probably responsible for AKI, as compared to CY. Further studies are required to explore the origin of this adverse effect.

Identification and quantification by 1H nuclear magnetic resonance spectroscopy of seven plasticizers in PVC medical devices.

Medical devices are generally made of polyvinyl chloride plasticized by six authorized plasticizers as alternatives to di-(2-ethylhexyl)-phthalate (DEHP) classified as reprotoxic class 1b. These are acetyl tri-n-butyl citrate (ATBC), di-(2-ethylhexy) adipate (DEHA), di-(2-ethylhexyl) terephthalate (DEHT), di-isononyl cyclohexane-1,2-dicarboxylate (DINCH), di-isononyl phthalate (DINP), and tri-octyl trimellitate (TOTM). The main objective of this study was to propose a new method using 1H NMR spectroscopy to determine and quantify these seven plasticizers in PVC sheets, standard infusion tubings, and commercially available medical devices. Two techniques were compared: dissolution in deuterated tetrahydrofuran and extraction by deuterated chloroform. Plasticizer 1H NMR spectra were very similar in both deuterated solvents; dissolution and extraction provided similar results. The sensitivity of this method enabled us to detect and quantify the presence of minor plasticizers in PVC. In nine commercially available samples, the major plasticizer was identified and quantified by 1H NMR. In six samples, one, two, or three minor plasticizers were identified and also quantified. DEHP was detected in only one tubing. NMR is therefore very convenient for studying plasticizers contained in medical devices. Only small quantities of solvents and sample are required. It is not necessary to dilute samples to enter a quantification range, and it is sufficiently sensitive to detect contaminants.

Immunoassay quantification of human insulin added to ternary parenteral nutrition containers: comparison of two methods.

Adding insulin directly into infusion bags seems to be a useful method for controlling hyperglycemia in patients under ternary parenteral nutrition (TPN). Its efficacy is assessed by glycemic monitoring but few data are available on insulin stability in this situation. Among the various methods for quantifying insulin levels in human serum, the immunoassay ones seemed potentially appropriate for a TPN admixture containing high lipid concentrations. We sought to identify and validate which of two immunoassay methods was the better to quantify human insulin and consequently be adapted to studying its stability in a TPN admixture. Two immunoassay methods to quantify recombinant human insulin were assessed in industrial TPN: an immunoradiometric assay (IRMA) and an immunoelectrochemiluminometric assay (IECMA). Validation trials for both methods were based on the accuracy profile method. Interference with immunometric assays due to the high lipidic content of TPN was eliminated through an improved preparation protocol using a bovine serum albumin (BSA) diluted in phosphate buffer saline (PBS). The relative total error of IECMA varied from 1.74 to 4.52% while it varied from -0.32 to 8.37% with IRMA. Only IECMA provided an accuracy profile with a 95% confidence interval of calculated-tolerance limits falling between the chosen acceptance limits (i.e., total error ≤±10%). IECMA combined with a BSA dilution is a simple and semi-automatic method that provides an accurate quantification of human insulin in a TPN admixture without any interference from lipids.

Evaluation of Specific Administering Devices for Antineoplastic Drugs Compounded in Syringes in Paediatry: Methodology Proposal.

Purpose The aims of this study were to propose a simple methodology to assess the rinsing volume of syringe extension sets and to compare several marketed devices. Methods A UV-spectrophotometry assay using quinine hydrochloride as drug substitute was developed. Quinine concentration ranged from 20 to 200 µg/ml. The assay was validated with the accuracy profile method and tested on five different assemblies (device+extension sets) with different dead-space volumes (1.28-2.80 ml) and at two different quinine concentrations (0.3 and 8.0 mg/ml). Rinsing was performed stepwise with water for injection until reaching an undetectable quinine concentration. After fitting the data with a Weibull model, assemblies were compared with an ANOVA performed on ranks (GraphPad, La Jolla, USA). Results The within-day and between-day precision ranges were 0.39-0.81 and 0.48-0.84%, respectively. The lower limit of quantification was 4.26 µg/ml. The volume required to completely rinse the infusion line was different according to the initial drug concentration and to the device assessed: from 6 to 10 ml for a low quinine concentration and from 7 to 17 ml for a high quinine concentration. Conclusion This study shows that a simple, cheap and easy-to-use methodology may be used to assess the rinsing volume of syringe extension sets. The rinsing volume is different according to the tested device.

Potential Impact of Infusion Technique on Drug Delivery.

BACKGROUND: Infusion practices have been modified, especially for antineoplastic drugs, through the use of specific infusion devices with postadministration rinsing (PAR) so as to decrease occupational exposure to drugs. The aim of this study was to highlight how such infusion devices may impact the drug delivery of injectable drugs. MATERIALS AND METHODS: Drug infusions were simulated with a radiotracer (99mTc) for 30 minutes to assess nine different infusion lines: 2 infusion methods without PAR (1 gravity-fed infusion and 1 pump infusion), 2 extension lines to be connected to standard infusion devices to allow PAR, and 5 specific infusion sets allowing a PAR. 99mTc was compounded in 250 or 100 mL of 0.9% NaCl solution. From the continuous recording of drug concentrations at device outlets, the areas under the drug concentration-time curve (AUC) were computed and divided in 2 parts: the AUCadm corresponding to the administration phase and the AUCrin corresponding to the rinsing phase. Their comparison to the initial activity led to compute the drug delivery. Results between groups were compared using a Kruskal-Wallis test (P < 0.05). RESULTS: Using standard infusion devices leads to administer only 91% and 88% when the drug is diluted in 250 and 100 mL, respectively. During the administration phase with the extension lines connected to infusion sets, between 90.8 ± 6.9% and 94.2 ± 1.8% of the drug is infused for 250 mL dilutions and 87.7 ± 2.0% for 100 mL dilutions. For specific infusion sets, the proportion of infused drug varied between 88.6 ± 6.0% and 95.3 ± 1.5% for dilutions in 250 mL and 71.2 ± 3.1% and 90.4 ± 2.8% for dilutions in 100 mL. Rinsing the lines means the remaining drug is administered a rinsing volume ranging between 47.0 ± 6.6 and 92.2 ± 8.9 mL according to the device and drug dilution. CONCLUSIONS: This study shows that drug delivery may differ according to infusion line and dilution volume. Further study is required to assess the impact of these devices on pharmacokinetics.

Stability of 10 mg/mL cefuroxime solution for intracameral injection in commonly used polypropylene syringes and new ready-to-use cyclic olefin copolymer sterile vials using the LC-UV stability-indicating method.

CONTEXT: Injecting intracameral cefuroxime has been found beneficial in reducing the risk of postoperative endophthalmitis but its use has been limited through a lack of approved marketing and of ready-to-use single-units as well as the problem of aseptic compounding. OBJECTIVE: Our aim was to assess a new automated primary packaging system which should ensure a higher level of sterility, thanks to its closed, sterile, ready-to-use polymer vial called "Crystal® vial". The chemical stability of a 10 mg/mL cefuroxime solution was compared in 1 mL Crystal® vials and 1 mL Luer-lock polypropylene syringes (actual reference) to eliminate any potential and specific interactions with its cyclic olefin copolymer (COC) body and elastomer stopper. METHODS: Cefuroxime solution was introduced into vials and syringes and stored at -20 °C, +5 °C and +25°C/60% Relative Humidity. Cefuroxime concentration and the relative amount of the main degradation product (descarbamoyl-cefuroxime) were both determined by an HPLC/UV method indicating stability. Solutions were considered steady if the concentration remained at over 90% of the initial value. In the adapted storage conditions, the evolution of osmolality, pH and sterility was assessed. RESULTS: Stability profiles were identical between vials and syringes in all storage and temperature conditions. The solution was stable (cefuroxime concentration, pH and osmolality) and still sterile for 365 days at -20°C. The concentration fell below 90% after 21 days at +5 °C and after 16 h at +25°C/60%s relative humidity. CONCLUSIONS: The COC and thermoplastic elastomer of the vials had no impact on the degradation process confirming its possible use for a ready-to-use cefuroxime solution single-unit dose.

Influence of vancomycin infusion methods on endothelial cell toxicity.

Peripheral intravenous therapy is frequently used in routine hospital practice and, due to various factors, its most common side effect is phlebitis. The infusion of vancomycin is particularly associated with phlebitis despite its widespread use. French guidelines recommend central intravenous infusion for high concentrations of vancomycin, but peripheral intravenous therapy is often preferred in intensive care units. Methods of vancomycin infusion are either intermittent infusion or continuous infusion. A comparison of these methods under in vitro conditions simulating clinical use could result in better infusion efficacy. Human umbilical vein endothelial cells (HUVECs) were therefore challenged with clinical doses of vancomycin over a 24- to 72-h period using these infusion methods. Cell death was measured with the alamarBlue test. Concentration-dependent and time-dependent vancomycin toxicity on HUVECs was noted with a 50% lethal dose at 5 mg/ml after 24 h, reaching 2.5 mg/ml after 72 h of infusion, simulating long-term infusion. This toxicity does not seem to be induced by acidic pH. In comparing infusion methods, we observed that continuous infusion induced greater cell toxicity than intermittent infusion at doses higher than 1 g/day. The increasing use of vancomycin means that new guidelines are required to avoid phlebitis. If peripheral intravenous therapy is used to reduce infusion time, along with intermittent infusion, vein irritation and localized phlebitis may be reduced. Further studies have to be carried out to explore the causes of vancomycin endothelial toxicity.

Endothelial Cell Toxicity of Vancomycin Infusion Combined with Other Antibiotics.

French guidelines recommend central intravenous (i.v.) infusion for high concentrations of vancomycin, but peripheral intravenous (p.i.v.) infusion is often preferred in intensive care units. Vancomycin infusion has been implicated in cases of phlebitis, with endothelial toxicity depending on the drug concentration and the duration of the infusion. Vancomycin is frequently infused in combination with other i.v. antibiotics through the same administrative Y site, but the local toxicity of such combinations has been poorly evaluated. Such an assessment could improve vancomycin infusion procedures in hospitals. Human umbilical vein endothelial cells (HUVEC) were challenged with clinical doses of vancomycin over 24 h with or without other i.v. antibiotics. Cell death was measured with the alamarBlue test. We observed an excess cellular death rate without any synergistic effect but dependent on the numbers of combined infusions when vancomycin and erythromycin or gentamicin were infused through the same Y site. Incompatibility between vancomycin and piperacillin-tazobactam was not observed in our study, and rinsing the cells between the two antibiotic infusions did not reduce endothelial toxicity. No endothelial toxicity of imipenem-cilastatin was observed when combined with vancomycin. p.i.v. vancomycin infusion in combination with other medications requires new recommendations to prevent phlebitis, including limiting coinfusion on the same line, reducing the infusion rate, and choosing an intermittent infusion method. Further studies need to be carried out to explore other drug combinations in long-term vancomycin p.i.v. therapy so as to gain insight into the mechanisms of drug incompatibility under multidrug infusion conditions.