Absence of the torcular, review of venous sinus anatomy, and the simplified dural sinus classification.

BACKGROUND: Classically, the torcular Herophili is described as the symmetric junction between the superior sagittal sinus (SSS), transverse sinuses (TSs), and straight sinus (SS). However, finding this pattern in practice is not standard. Anatomical variations are common, and different drainage patterns should be expected. Existing literature proposes highly detailed descriptions and classifications of this region. Still, a simplified and practical categorization is not available. METHODS: We present an anatomical finding of the torcular Herophili discovered on a cadaveric dissection. Then, we conducted a retrospective study examining the 100 most recent cranial magnetic resonance venographies (MRVs) from the Mayo Clinic, labeling them with a new proposed dural sinus classification system. Images were initially classified by two authors and further validated by a board-certified neurosurgeon and a board-certified neuroradiologist from our institution. To measure consistency in image identification, two additional international neurosurgeons were asked to classify a subset of the same MRV images, and their answers were compared. RESULTS: Of the MRV cohort, 33 patients were male and 67 were female. Their ages ranged from 18 to 86 years, with a mean of 47.35 years and a median of 49 years. Upon examination, 53 patients presented as confluent (53%), 9 as SSS divergent (9%), 25 as SS divergent (25%), 11 as circular (11%), and 2 as trifurcated (2%). The inter-rater reliability ranked very good; agreement between the two neurosurgeons was 83% (κ = 0.830, p < 0.0005). CONCLUSION: The confluence of the venous sinuses is a highly variable anatomical area that is rarely evaluated with neuroimaging before surgery. The classic textbook configuration is not the rule. Using a simplified classification system may increase awareness and hopefully patient safety by preparing the physician for anatomical variations that they will encounter in a surgical or clinical scenario.

Investigation of a three-dimensional printed dynamic cervical spine model for anatomy and physiology education.

INTRODUCTION: Three-dimensional (3D) printing of anatomical structures is a growing method of education for students and medical trainees. These models are generally produced as static representations of gross surface anatomy. In order to create a model that provides educators with a tool for demonstration of kinematic and physiologic concepts in addition to surface anatomy, a high-resolution segmentation and 3D-printingtechnique was investigated for the creation of a dynamic educational model. METHODS: An anonymized computed tomography scan of the cervical spine with a diagnosis of ossification of the posterior longitudinal ligament was acquired. Using a high-resolution thresholding technique, the individual facet and intervertebral spaces were separated, and models of the C3-7 vertebrae were 3D-printed. The models were placed on a myelography simulator and subjected to flexion and extension under fluoroscopy, and measurements of the spinal canal diameter were recorded and compared to in-vivo measurements. The flexible 3D-printed model was then compared to a static 3D-printed model to determine the educational benefit of demonstrating physiologic concepts. RESULTS: The canal diameter changes on the flexible 3D-printed model accurately reflected in-vivo measurements during dynamic positioning. The flexible model also was also more successful in teaching the physiologic concepts of spinal canal changes during flexion and extension than the static 3D-printed model to a cohort of learners. CONCLUSIONS: Dynamic 3D-printed models can provide educators with a cost-effective and novel educational tool for not just instruction of surface anatomy, but also physiologic concepts through 3D ex-vivo modeling of case-specific physiologic and pathologic conditions.

Development of a Lumbar Drain Simulator for Instructional Technique and Skill Assessment.

BACKGROUND: Medical simulation for the teaching of procedural skills to health-care providers is an effective method of instruction to improve safety, quality, and procedural efficiency. There are several commercially available simulators for lumbar puncture training; however, there is currently no model available for lumbar drain intrathecal catheter placement. METHODS: A modular lumbar drain simulator was assembled with the use of a spine model, ballstical gel, and Penrose drain tubing to recreate the procedural steps and tactile feedback of a live lumbar drain insertion. RESULTS: The assembled simulator demonstrated the ability to provide users with manual feeback of a "pop" sensation when intrathecal puncture was achieved with a 14 gauge Touhy needle, as well as spontaneous CSF flow. A silastic catheter was able to be inserted into the simulated subarachnoid space in the same manner as a live procedure. CONCLUSIONS: A high-fidelity lumbar drain simulator can be constructed in a cost-effective manner. We have detailed the materials and assembly of our successful design in order to provide a novel educational tool for procedural instruction and practice.

The three-dimensional printing renaissance of individualized anatomical modeling: Are we repeating history?

Three-dimensional (3D) printing has revolutionized individualized medicine for patient-specific anatomical modeling and surgical planning. The surge of investigations in model creation for preoperative assessments and patient education has demonstrated improvements in both operative factors and patient satisfaction. In addition, recent technologic advances in 3D printing techniques have provided a resource to create visually pleasing models with chromatic cues for segmentation of adjacent structures. Despite these advances, an important consideration that has yet to be addressed is the quality of representation of the not only the form of structures created, but also the functional relationships of each structure. Jean François Fernel (1497-1558 AD) recognized a similar trend in anatomic innovation over 500 years ago, and sparked a series of texts that challenged the superficial anthropocentric views of the time and led to the foundation of physiologic principles that shaped modern medical philosophy. Accurately generating anatomical structures are directly related to discerning true physiologic function, and a comprehensive understanding of both is essential to hold accountability in fidelity for individualized 3D printing.

The importance of teaching clinical anatomy in surgical skills education: Spare the patient, use a sim!

Anatomical knowledge is a key tenet in graduate medical and surgical education. Classically, these principles are taught in the operating room during live surgical experience. This puts both the learner and the patient at a disadvantage due to environment, time, and safety constraints. Educational adjuncts such as cadaveric courses and surgical skills didactics have been shown to improve resident confidence and proficiency in both anatomical knowledge and surgical techniques. However, the cost-effectiveness of these courses is a limiting factor and in many cases prevents implementation within institutional training programs. Anatomical simulation in the form of "desktop" three-dimensional (3D) printing provides a cost-effective adjunct while maintaining educational value. This article describes the anatomical and patient-centered approach that led to the establishment of our institution's 3D printing laboratory for anatomical and procedural education. Clin. Anat. 32:124-127, 2019. © 2019 Wiley Periodicals, Inc.

Microanatomical considerations for safe uncinate removal during anterior cervical discectomy and fusion: 10-year experience.

Cervical radiculopathy from uncovertebral joint (UVJ) hypertrophy and nerve root compression often occurs anterior and lateral within the cervical intervertebral foramen, presenting a challenge for complete decompression through anterior cervical approaches owing to the intimate association with the vertebral artery and associated venous plexus. Complete uncinatectomy during anterior cervical discectomy and fusion (ACDF) is a controversial topic, many surgeons relying on indirect nerve root decompression from restoration of disc space height. However, in cases of severe UVJ hypertrophy, indirect decompression does not adequately address the underlying pathophysiology of anterolateral foraminal stenosis. Previous reports in the literature have described techniques involving extensive dissection of the cervical transverse process and lateral uncinate process (UP) in order to identify the vertebral artery for safe removal of the UP. Recent anatomical investigations have detailed the microanatomical organization of the fibroligamentous complex surrounding the UP and neurovascular structures. The use of the natural planes formed from the encapsulation of these connective tissue layers provides a safe passage for lateral UP dissection during anterior cervical approaches. This can be performed from within the disc space during ACDF to avoid extensive lateral dissection. In this article, we present our 10-year experience using an anatomy-based microsurgical technique for safe and complete removal of the UP during ACDF for cervical radiculopathy caused by UVJ hypertrophy.

Ex vivo virtual and 3D printing methods for evaluating an anatomy-based spinal instrumentation technique for the 12th thoracic vertebra.

INTRODUCTION: Three-dimensional printing and virtual simulation both provide useful methods of patient-specific anatomical modeling for assessing and validating surgical techniques. A combination of these two methods for evaluating the feasibility of spinal instrumentation techniques based on anatomical landmarks has not previously been investigated. MATERIALS AND METHODS: Nineteen anonymized CT scans of the thoracic spine in adult patients were acquired. Maximum pedicle width and height were recorded, and statistical analysis demonstrated normal distributions. The images were converted into standard tessellation language (STL) files, and the T12 vertebrae were anatomically segmented. The intersection of two diagonal lines drawn from the lateral and medial borders of the T12 transverse process (TP) to the lateral border of the pars and inferolateral portion of the TP was identified on both sides of each segmented vertebra. A virtual screw was created and insertion into the pedicle on each side was simulated using the proposed landmarks. The vertebral STL files were then 3D-printed, and 38 pedicles were instrumented according to the individual posterior landmarks used in the virtual investigation. RESULTS: There were no pedicle breaches using the proposed anatomical landmarks for insertion of T12 pedicle screws in the virtual simulation component. The technique was further validated by additive manufacturing of individual T12 vertebrae and demonstrated no breaches or model failures during live instrumentation using the proposed landmarks. CONCLUSIONS: Ex vivo modeling through virtual simulation and 3D printing provides a powerful and cost-effective means of replicating vital anatomical structures for investigation of complex surgical techniques.

How I do it: tapered rod placement across the cervicothoracic junction for augmented posterior constructs.

BACKGROUND: Posterior instrumentation techniques are commonly employed for cervicothoracic fixation. The pedicles of the upper thoracic vertebrae can typically accommodate larger diameter screws than the subaxial cervical vertebrae. In many construct systems, this requires the use of a tapered rod, which can be technically challenging to place. METHOD: Using a three-dimensionally printed biomimetic spine simulator, we illustrate the stepwise process of instrumentation and tapered rod placement across the cervicothoracic junction (CTJ). CONCLUSION: Tapered rod systems can augment the biomechanical stability of cervicothoracic constructs. Ease of rod placement across the CTJ hinges upon a systematic method of instrumentation.

International Learner Perceptions, Educational Value, and Cost Associated With the Use of Start-to-Finish Surgical Simulation Compared With Cadaveric Models.

BACKGROUND: Graduate surgical education is highly variable across regions and institutions regarding case volume and degree of trainee participation in each case. Dedicated educational curriculum using cadaveric tissue has been shown to enhance graduate surgical training, however with associated financial and utility burden to the institution. OBJECTIVE: To investigate the utility of educational and cost applications of a novel method of combining mixed organic hydrogel polymers and 3-dimensional printed anatomic structures to create a complete "start-to-finish" simulation for resident education in spinal anatomy, instrumentation, and surgical techniques. METHODS: This qualitative pilot study investigated 14 international participants on achievement of objective and personal learning goals in a standardized curriculum using biomimetic simulation compared with cadaveric tissue. A questionnaire was developed to examine trainee evaluation of individual anatomic components of the biomimetic simulators compared with previous experience with cadaveric tissue. RESULTS: A total of 210 responses were acquired from 14 participants. Six participants originated from US residency education programs and 8 from transcontinental residency programs. Survey results for the simulation session revealed high user satisfaction. Score averages for each portion of the simulation session indicated learner validation of anatomic features for the simulation compared with previous cadaveric experience. Cost analysis resulted in an estimated savings of $10 833.00 for this single simulation session compared with previous cadaveric tissue sessions. CONCLUSION: The results of this study indicate a strong potential of establishing biomimetic simulation as a cost-effective and high-quality alternative to cadaveric tissue for the instruction of fundamental spine surgical techniques.

An Anatomical Method for Rib Disconnection During Posterior Costotransversectomy for Paravertebral Access to the Ventral Thoracic Spine.

OBJECTIVE: Posterior costotransversectomy in the thoracic spine is commonly used for degenerative diseases, tumors, trauma, and other operative indications. It involves resection of the rib head after the ligamentous complexes have been disconnected from the transverse process and lateral vertebral body. The current literature provides only vague descriptions of the steps involved in rib disconnection with respect to posterior costotransversectomy. METHODS AND RESULTS: Through cadaveric studies and in vivo application, a stepwise method for rib disconnection is described. CONCLUSIONS: This manuscript is the first to outline an anatomical method for rib disconnection during costotransversectomy.

Anatomical Engineering and 3D Printing for Surgery and Medical Devices: International Review and Future Exponential Innovations.

Three-dimensional printing (3DP) has recently gained importance in the medical industry, especially in surgical specialties. It uses different techniques and materials based on patients' needs, which allows bioprofessionals to design and develop unique pieces using medical imaging provided by computed tomography (CT) and magnetic resonance imaging (MRI). Therefore, the Department of Biology and Medicine and the Department of Physics and Engineering, at the Bioastronautics and Space Mechatronics Research Group, have managed and supervised an international cooperation study, in order to present a general review of the innovative surgical applications, focused on anatomical systems, such as the nervous and craniofacial system, cardiovascular system, digestive system, genitourinary system, and musculoskeletal system. Finally, the integration with augmented, mixed, virtual reality is analyzed to show the advantages of personalized treatments, taking into account the improvements for preoperative, intraoperative planning, and medical training. Also, this article explores the creation of devices and tools for space surgery to get better outcomes under changing gravity conditions.

Establishing a Cost-Effective 3-Dimensional Printing Laboratory for Anatomical Modeling and Simulation: An Institutional Experience.

SUMMARY STATEMENT: Three-dimensional (3D) printing is rapidly growing in popularity for anatomical modeling and simulation for medical organizations across the world. Although this technology provides a powerful means of creating accurately representative models of anatomic structures, there remains formidable financial and workforce barriers to understanding the fundamentals of technology use, as well as establishing a cost- and time-effective system for standardized incorporation into a workflow for simulator design and anatomical modeling. There are many factors to consider when choosing the appropriate printer and accompanying software to succeed in accomplishing the desired goals of the executing team. The authors have successfully used open-access software and desktop fused deposition modeling 3D printing methods to produce more than 1000 models for anatomical modeling and procedural simulation in a cost-effective manner. It is our aim to share our experience and thought processes of implementing 3D printing into our anatomical modeling and simulation workflow to encourage other institutions to comfortably adopt this technology into their daily routines.

Multilevel Hemilaminotomy Windows for the Surgical Management of Spinal Epidural Lipomatosis Causing Syringomyelia: Technical Note and Literature Review.

BACKGROUND: Spinal epidural lipomatosis (SEL) is the excessive accumulation of extradural adipose tissue. Severe cases could result in myelopathy, and very rarely, in syringomyelia formation. Surgery has been associated with high morbidity and mortality, and no proven long-term benefits. The objective was to provide a technical description of an efficient and cost-effective procedure for multilevel thoracic decompression without requiring spinal instrumentation. METHODS: A technique of multilevel hemilaminotomy windows is described in a patient with severe thoracic SEL causing syringomyelia. A 3-dimensional spine model was created to illustrate the technique and working angles. We performed a literature review by searching PubMed, Ovid Embase, and Scopus electronic databases with the predetermined inclusion criteria of cases with spinal lipomatosis and a fluid cavity within the spinal cord. RESULTS: The patient's deficit and syringomyelia resolved postoperatively. A review of the literature revealed only 3 cases of syringomyelia secondary to SEL. Syringomyelia expansion occurred in all cases leading to progressive neurologic decline, and surgery with removal of the excessive adipose tissue resolved the syringomyelia and improved the neurologic functioning in all cases. CONCLUSIONS: This technique of multilevel alternating hemilaminotomy "windows" allows for safe and effective decompression and resection of the excessive adipose tissue with reduced operative time and without requiring spine instrumentation. The technique maintains the integrity of the posterior column, thus reducing the risk of postdecompression deformity. Careful bipolar electrocoagulation of internal vertebral veins and meticulous hemostasis is key for minimizing the intraoperative blood loss and avoiding postoperative hematoma formation.

Retrosigmoid Craniectomy and Suprameatal Drilling-3-Dimensionally Printed Microneurosurgical Simulation: 2-Dimensional Operative Video.

Neurosurgical training is being challenged by rigorous work-hour restrictions and the COVID-19 pandemic.1 Now, more than ever, surgical simulation plays a pivotal role in resident education and psychomotor skill development. Three-dimensional (3D) printing technologies enable the construction of inexpensive, patient-specific, anatomically accurate physical models for a more convenient and realistic simulation of complex skull base approaches in a safe environment.2 All stages of the surgical procedure can be simulated, from positioning and exposure to deep microdissection, which has an unparalleled educational value. The complex approach-specific anatomy, narrow working angles, and pathoanatomic relationships can be readily explored from the surgeon's perspective or point of view.2,3 Furthermore, different thermoplastic polymers can be utilized to replicate the visual and tactile feedback of bone (cortical/cancellous), neurological, and vascular tissues.4 Retrosigmoid craniectomies are widely used in neurosurgery with various applications, including microvascular decompressions in patients with trigeminal neuralgia.5-7 Removal of the suprameatal tubercle (SMT) extends the retrosigmoid approach superiorly to the middle fossa and Meckel's cave, and anteriorly to the clivus.8,9 This maneuver may be necessary in patients with prominent SMTs obstructing the view of the trigeminal nerve and in patients with a more anterosuperior neurovascular conflict. This video illustrates a microsurgical training tool for learning and honing the technique of retrosigmoid craniectomy and suprameatal drilling using an affordable (29.00 USD) biomimetic 3D-printed simulator that closely recapitulates not only the anatomy but also the tactile feedback of drilling and manipulating neurological tissues (see Table and Graph 1; minute 07:11) as it happens at the time of surgery.

Three-Dimensionally Printed Surgical Simulation Tool for Brain Mapping Training and Preoperative Planning.

BACKGROUND: Brain mapping is the most reliable intraoperative tool for identifying surrounding functional cortical and subcortical brain parenchyma. Brain mapping procedures are nuanced and require a multidisciplinary team and a well-trained neurosurgeon. Current training methodology involves real-time observation and operation, without widely available surgical simulation. OBJECTIVE: To develop a patient-specific, anatomically accurate, and electrically responsive biomimetic 3D-printed model for simulating brain mapping. METHODS: Imaging data were converted into a 2-piece inverse 3D-rendered polyvinyl acetate shell forming an anatomically accurate brain mold. Functional and diffusion tensor imaging data were used to guide wire placement to approximate the projection fibers from the arm and leg areas in the motor homunculus. Electrical parameters were generated, and data were collected and processed to differentiate between the 2 tracts. For validation, the relationship between the electrical signal and the distance between the probe and the tract was quantified. Neurosurgeons and trainees were interviewed to assess the validity of the model. RESULTS: Material testing of the brain component showed an elasticity modulus of 55 kPa (compared to 140 kPa of cadaveric brain), closely resembling the tactile feedback a live brain. The simulator's electrical properties approximated that of a live brain with a voltage-to-distance correlation coefficient of r2 = 0.86. Following 32 neurosurgeon interviews, ∼96% considered the model to be useful for training. CONCLUSION: The realistic neural properties of the simulator greatly improve representation of a live surgical environment. This proof-of-concept model can be further developed to contain more complicated tractography, blood and cerebrospinal fluid circulation, and more in-depth feedback mechanisms.

Considerations and Cautions for Three-Dimensional-Printed Personal Protective Equipment in the COVID-19 Crisis.

The recent decline in available personal protective equipment (PPE) due to the novel coronavirus (COVID-19) pandemic has given rise to a host of three-dimensional (3D) printed prototypes for facemask and respirator units. Many of these models have been made open access and publicly available for printing and use, and have been promoted by various media outlets. Although these desktop 3D printing measures have provided a possible venue for success in providing homemade and cost-effective PPE to health care workers, the rapid dissemination of these prototypes has been performed without reproducible methods of standardization and vetted safety in use. Although these methods have not been sanctioned by authoritative organizations as viable production approaches to address the PPE shortage, a concerted effort within the 3D printing community to adhere to scientific methodology and organized research efforts has the potential to provide a solution to this critical issue.

A Unique Approach to Building a Learner-Guided Ultrasound Simulator for Central Venous Access Training.

Commercial central line vascular access trainers are available but have significant limitations including cost, size, and limited durability when used for the complete procedure. A unique central venous access trainer was constructed using silicone loaf pan, ballistic gel, copper pipe and aluminum rods as vessels conduits, with varying inserts including latex and silicone to simulate different vascular structures, and the use of camouflage. This trainer is inexpensive, portable, reusable, allows the complete procedure to be simulated, and may be customized to the specific needs of the learner. The assembled simulator demonstrated excellent ultrasound visualization, including varying size and vessel character, allowed modification to specific learner needs, while at the same time being light-weight, portable, inexpensive, and reusable. A moderate-fidelity central venous access simulator can be constructed in a cost-effective manner, which can be optimized to the learner skill level and allows the entire procedure to be completed on the simulator.

3-Dimensionally Printed Biomimetic Surgical Simulation-Operative Technique of a Transforaminal Lumbar Interbody Fusion: 2-Dimensional Operative Video.

We present a surgical video highlighting the technical demonstration and microsurgical anatomy of an L4-5 transforaminal lumbar interbody fusion utilizing a combination of thermoplastic polymers and 3-dimensional printing technology to create a biomimetic lumbar spine surgical simulator. The posterior elements of L4-5 and the inferior portion of L3 are exposed in their entirety, including the transverse processes in order to identify the appropriate landmarks for pedicle screw insertion. The interspinous ligament of L4-5 is removed, and an interlaminar spreader is used to distract the facet joint. An inferior L4 facetectomy is performed for local autograft harvesting. The L4 and L5 pedicles are skeletonized to completely open the foramen in order to ensure that the exiting nerve root will not be compromised during cage insertion. The ligamentum flavum is then removed, exposing the common thecal sac and L5 traversing root. The L4 exiting nerve root is then identified, completing Kambin's triangle and location of the disc space. The disc is incised, and a combination of punches and curettes are used to completely remove the disc. After an interbody trial is used to assess the proper cage size, the cage is packed with graft and inserted into the midline of the disc space. Pedicle screws are then placed using an anatomic freehand technique, and intraoperative fluoroscopy is performed in order to evaluate the instrumentation and interbody position. If a contralateral decompression is required, a facet-sparing technique is performed in order to preserve bony surface for the fusion. Patient consent was not required for this simulation video.

Total Anterior Uncinatectomy During Anterior Discectomy and Fusion for Recurrent Cervical Radiculopathy: A Two-dimensional Operative Video and Technical Report.

A common cause of cervical radiculopathy from degenerative foraminal stenosis is severe uncovertebral hypertrophy. It is difficult to accomplish complete foraminal decompression in these cases with posterior techniques without the removal of a large portion of the facet joint. Total removal of the uncovertebral joint from an anterior approach allows for complete decompression of the exiting cervical nerve root and has been shown to be a safe technique. In this surgical video and technical report, we demonstrate the surgical anatomy and operative technique of a two-level anterior uncinatectomy during anterior discectomy and fusion (ACDF) for recurrent cervical radiculopathy after a previous multi-level posterior foraminotomy. The patient is a 67-year-old male with a progressive left arm and neck pain with radiographic, clinical, and electrophysiologic diagnostic evidence of active C6 and C7 radiculopathies from degenerative foraminal stenosis at the C5-6 and C6-7 levels. Posterior foraminotomies had been performed without significant improvement in his radicular pain. A repeat MRI demonstrated lateral foraminal stenosis from severe uncovertebral joint hypertrophy at the C5-6 and C6-7 levels. After acquiring informed consent from the patient, an anterior approach was performed with complete removal of the uncovertebral joints at both levels with discectomy and fusion. Postoperatively, the patient had complete resolution of his radicular pain and remained pain-free at the latest follow-up. Complete uncinatectomy and ACDF is an effective technique for complete foraminal decompression in cases of refractory radiculopathy and neck pain after unsuccessful posterior decompression.

Cost-Effective Method for 3-Dimensional Printing Dynamic Multiobject and Patient-Specific Brain Tumor Models: Technical Note.

BACKGROUND: Three-dimensional (3D) printing is a powerful tool for replicating patient-specific anatomic features for education and surgical planning. The advent of "desktop" 3D printing has created a cost-effective and widely available means for institutions with limited resources to implement a 3D-printing workflow into their clinical applications. The ability to physically manipulate the desired components of a "dynamic" 3D-printed model provides an additional dimension of anatomic understanding. There is currently a gap in the literature describing a cost-effective and time-efficient means of creating dynamic brain tumor 3D-printed models. METHODS: Using free, open-access software (3D Slicer) for patient imaging to Standard Tessellation Language file conversion, as well as open access Standard Tessellation Language editing software (Meshmixer), both intraaxial and extraaxial brain tumor models of patient-specific pathology are created. RESULTS: A step-by-step methodology and demonstration of the software manipulation techniques required for creating cost-effective, multidimensional brain tumor models for patient education and surgical planning are exhibited using a detailed written guide, images, and a video display. CONCLUSIONS: In this technical note, we describe in detail the specific functions of free, open-access software and desktop 3D printing techniques to create dynamic and patient-specific brain tumor models for education and surgical planning.