The role of urea on the dissolution of starch in NaOH-urea aqueous solutions.

Potato starch can be dissolved in NaOH-urea aqueous solutions to form a stable and homogeneous mixture to initiate further modification. The mechanism for the formation of such a solution was investigated by examining the interactions between urea and starch, using rheological tests, 13C NMR, FTIR, and a novel Kamlet-Taft solvation parameter analysis. It was found that the optimized dissolution condition was in aqueous 10% w/w NaOH-14% w/w urea, under which 97.4% light transmission was achieved. This was due to dispersive forces between urea and starch without the presence of strong hydrogen bond based interactions. DSC results further showed that the subtle dissolving facilitation of urea might be attributed to the heat released during urea hydrate formation. Compared with conventional hydrothermal gelatinized starch, the starch-NaOH-urea aqueous dispersion exhibited better stability. This highlighted the role of urea in forming a 'bridge' to combine starch with water molecules. This reduces the tendency for starch aggregation via its hydrophobic components. Intrinsic viscosity and GPC analysis indicated that the degradation of starch molecules was significantly reduced. This work provides new insights into the role of urea in starch-NaOH-urea aqueous dispersion. This type of starch solvent formulation will have significant potential for further preparation of starch-based materials for various applications.

An eco-friendly wood adhesive based on waterborne polyurethane grafted with gelatin derived from chromium shavings waste.

An environmentally friendly wood adhesive developed from waterborne polyurethane (WPU) grafted gelatin (G) was investigated in this research. First, the G was extracted from chromium shavings waste, and then mixed with a prepolymer emulsion of WPU to synthesis the graft copolymer (WPUG) via a solvent-free emulsion copolymerization. The synthesized copolymer was characterized using the mechanical properties test, TGA, FT-IR, and other analysis technology. The results indicated that the WPUG had a good overall performance. Specifically, the contact angle reached 111.5°, the tensile strength reached 32.91 MPa, the temperature of the maximum weight loss was greater than 350 °C. The WPUG adhesive had excellent bonding power and mechanical properties; the dry bonding strength reached 4.21 MPa when the ratio between free amino groups of the G and isocyanate-groups of the WPU (the R value) was 1.5. This preparation of the graft copolymer not only satisfies the need of environment-friendly wood adhesives, but it also effectively improves the recyclability of chromium shavings waste.

Dynamic bonds enable high toughness and multifunctionality in gelatin/tannic acid-based hydrogels with tunable mechanical properties.

Biopolymer-based functional hydrogels with excellent mechanical properties are desired, but their fabrication remains a challenge. Learning from the tofu-making process, we developed a freely formable hydrogel with high toughness and stiffness from the hydrogen bond-rich coacervation of tannic acid and gelatin through a simple hot-pressing process that transforms the coacervate particles into a bulk hydrogel. The mechanical properties of the obtained gelatin/tannic acid hydrogel (G/T gel) can be controlled by tuning the weight ratio of tannic acid to gelatin in the gel. The G/T gel with optimum mechanical properties possesses high Young's modulus, fracture strain, and fracture energy of ∼60 MPa, ∼10, and ∼24 kJ m-2, respectively. These properties arise from the phase-separated structure and high concentration of dynamic hydrogen bonds with widely distributed bond strengths. These dynamic hydrogen bonds also enable multifunctional properties of the gel, such as self-recovery, self-healing, rebuildability and shape memory. The combination of excellent mechanical properties, good biocompatibility, and useful functionalities into one hydrogel that comes from renewable sources demonstrates the great potential of G/T gels.

Engineering eco-friendly and biodegradable biomass-based multifunctional antibacterial packaging films for sustainable food preservation.

The study presents a new class of eco-friendly and biodegradable biomass-based multifunctional antibacterial packaging films (G-OCSI) based on oxidized corn starch-based nonionic biopolymer (OCSI) and gelatin (Gel), and investigates the effects of different OCSI contents on the properties of G-OCSI. The results demonstrated that G-OCSI 0.25 had good water vapor barrier properties, antioxidant activity (DPPH RSA: 85.84 %), UV resistance (UV blocking > 99.9 %), water resistance (WCA: 122.30°), and tensile properties. Based on the disk diffusion experiment, G-OCSI exhibited significant bactericidal and antibacterial effects against S. aureus and E. coli. Moreover, G-OCSI had good biodegradability in natural environments, and could obviously accelerate the crops growth. Finally, a banana preservation experiment confirmed that G-OCSI could significantly extend the shelf life of bananas at room temperature at least 3 days. The biodegradable packaging films not only realizes the sustainable utilization of biomass resources but also has the potential to replace traditional petroleum-based plastics.

A temperature and pressure dual-responsive, stretchable, healable, adhesive, and biocompatible carboxymethyl cellulose-based conductive hydrogels for flexible wearable strain sensor.

The study aimed to develop a novel temperature and pressure dual-responsive conductive hydrogel with self-healing, self-adhesive, biocompatible, and stretchable properties, for the development of multifunctional anti-counterfeiting and wearable flexible electronic materials. A conductive hydrogel based on carboxymethyl cellulose (CMC) was synthesized by simple "one pot" free radical polymerization of CMC, acrylamide (AAm) and acrylic acid (AAc). The hydrogel displayed temperature responsiveness and possessed an upper critical solution temperature (UCST) value. In addition, hydrogels also had surprising pressure responsiveness. The synthesized hydrogels were characterized by FTIR, TGA, DSC, and XRD analysis. Importantly, the obtained hydrogels exhibited exceptional mechanical properties (stress: 730 kPa, strain: 880%), fatigue resistance, stretchability, self-healing capability, self-adhesive properties, and conductivity. In addition, valuable insights were obtained into the synthesis and application of flexible anti-counterfeiting and camouflage materials by the temperature and pressure dual-responsive hydrogels. Moreover, the prepared hydrogel, with an electrically sensitive perception of external strain (GF = 2.61, response time: 80 ms), can be utilized for monitoring human movement, emotional changes, physiological signals, language, and more, rendering it suitable for novel flexible anti-counterfeiting materials and versatile wearable iontronics. Overall, this study provided novel insights into the simple and efficient synthesis and sustainable manufacturing of environmentally friendly multifunctional anti-counterfeiting materials and flexible electronic skin sensors.

Discarded enoki mushroom root-derived multifunctional chrome-free chitosan-based tanning agent for eco-leathers manufacturing: Tanning-dyeing, non-acid soaking, and non-basifying.

The aim of this study was to develop new discarded enoki mushroom root-derived multifunctional chrome-free chitosan-based tanning agents that can be used for eco-leather manufacturing. In this study, oligochitosan (OCS) was prepared from chitosan extracted from the enoki mushrooms and chemically modified using reactive dye R19 and epichlorohydrin (ECH) to prepare chromium-free tanning agent (OCS-R19-ECH) with both tanning and dyeing functions. FT-IR, XRD, and NMR (1H) confirmed the successful synthesis of the product. The molecular weight of OCS-R19-ECH is 6355 g/mol, with an average particle size of 1249.37 nm and an epoxy value of 0.276 mol/100 g. OCS-R19-ECH was used for tanning experiments on bated sheepskin, and the results showed that the leather tanned with OCS-R19-ECH not only exhibited excellent wet-heat stability (shrinkage temperature = 81 °C), but also superior dyeing uniformity, resistance to dry and wet abrasion, mechanical strength (tensile strength = 12.4 MPa, tear strength = 57.3 N/mm), and outstanding antimicrobial properties. Most importantly, compared with traditional tanning agents, OCS-R19-ECH has a higher pH (9.0), tanning-dyeing integration, non-acid soaking, and non-basifying can be achieved in leather making, which can greatly simplify the tanning processes. This new multifunctional chrome-free chitosan-based tanning agent facilitates high-value utilization of waste resources.

Extraction of chitin from flammulina velutipes waste: A low-concentration acid pretreatment and aspergillus Niger fermentation approach.

In recent years, with the booming of the edible mushroom industry, chitin production has become increasingly dependent on fungi and other non-traditional sources. Fungal chitin has advantages including superior performance, simpler separation processes, abundant raw materials, and the absence of shellfish allergens. As a kind of edible mushroom, flammulina velutipes (F. velutipes) also has the advantages of wide source and large annual yield. This provided the possibility for the extraction of chitin. Here, a procedure to extract chitin from F. velutipes waste be presented. This method comprises low-concentration acid pretreatment coupled with consolidated bioprocessing with Aspergillus niger. Characterization by SEM, FTIR, XRD, NMR, and TGA confirmed that the extracted chitin was ß-chitin. To achieve optimal fermentation of F. velutipes waste (80 g/L), ammonium sulfate and glucose were selected as nitrogen and carbon sources (5 g/L), with a fermentation time of 5 days. The extracted chitin could be further deacetylated and purified to obtain high-purity chitosan (99.2 % ± 1.07 %). This chitosan exhibited a wide degree of deacetylation (50.0 % ± 1.33 % - 92.1 % ± 0.97 %) and a molecular weight distribution of 92-192 kDa. Notably, the yield of chitosan extracted in this study was increased by 56.3 % ± 0.47 % compared to the traditional chemical extraction method.

Advances in the preparation and application of cellulose-based antimicrobial materials: A review.

The rise of polymer materials in modern life has drawn attention to renewable, easily biodegradable, environmentally-friendly bio-based polymers. Notably, significant research has been dedicated to creating green antimicrobial functional materials for the biomedical field using natural polymer materials. Cellulose is a rich natural biomass organic polymer material. Given its favorable attributes like film-forming capability, biodegradability, and biocompatibility, it is extensively employed to tackle a wide range of challenges confronting humanity today. However, its inherent drawbacks, such as insolubility in water and most organic solvents, hygroscopic nature, difficulty in melting, and limited antimicrobial properties, continue to pose challenges for realizing the high-value applications of cellulose. Achieving multifunctionality and more efficient application of cellulose still poses major challenges. In this regard, the current development status of cellulose materials was reviewed, covering the classification, preparation methods, and application status of cellulose-based antimicrobial materials. The application value of cellulose-based antimicrobial materials in biomedicine, textiles, food packaging, cosmetics and wastewater treatment was summarised. Finally, insights were provided into the developing prospects of cellulose-based antimicrobial materials were provided.

New plant polyphenol-derived tannic acid-based chromium-free tanning agent for sustainable and clean leather production.

This study aimed to prepare a new bio-based chromium-free tanning agent. The green epoxide monocase ethylene glycol diglycidyl ether (EGDE) was grafted with tannic acid (TA) derived from natural plant using the one-pot method to synthesize new plant polyphenol-derived tannic acid-based chromium-free tanning agents (TA-EGDE) with abundant terminal epoxides. FTIR, 1H NMR, XPS, GPC, SEM, and other analytical techniques were used to characterize tanning agents. These consequences manifested that EGDE was successfully grafted with the phenol hydroxyl group of TA. The epoxide value of TA-EGDE showed a tendency to increase and then decrease with increasing EGDE dosage, and the epoxide value of TA-EGDE-2 attained a maximum of 0.262 mol/100 g. GPC analysis showed that the formula weight of the prepared TA-EGDE was partially distributed above 5000 Da. The tanning experiment demonstrated that the shrinkage temperatures (Ts) of the TA-EGDE-tanned leathers were all higher than 81.5 °C. Compared with the traditional commercial chromium-free tanning agent (F-90, TWS), TA-EGDE-tanned leathers exhibited higher Ts and better mechanical properties. The TA-EGDE prepared in this study not only has ecological environmental protection but also provides finished leather with good moisture, heat resistance, and mechanical properties.

Eco-Friendly Cellulose-Based Nonionic Antimicrobial Polymers with Excellent Biocompatibility, Nonleachability, and Polymer Miscibility.

This study aims to prepare natural biomass-based nonionic antimicrobial polymers with excellent biocompatibility, nonleachability, antimicrobial activity, and polymer miscibility. Two new cellulose-based nonionic antimicrobial polymers (MIPA and MICA) containing many terminal indole groups were synthesized using a sustainable one-pot method. The structures and properties of the nonionic antimicrobial polymers were characterized using nuclear magnetic resonance hydrogen spectroscopy (1H NMR), infrared spectroscopy (FTIR), wide-angle X-ray diffractometry (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), gel chromatography (GPC), and other analytical techniques. The results showed that microcrystalline cellulose (MCC) molecules combined with indole derivatives through an esterification reaction to produce MICA and MIPA. The crystallinity of the prepared MICA and MIPA molecules decreased after MCC modification; their morphological structure changed from short fibrous to granular and showed better thermal stability and solubility. The paper diffusion method showed that both nonionic polymers had good bactericidal effects against the two common pathogenic bacteria Escherichia coli (E. coli, inhibition zone diameters >22 mm) and Staphylococcus aureus (S. aureus, inhibition zone diameters >38 mm). Moreover, MICA and MIPA showed good miscibility with biodegradable poly(vinyl alcohol) (PVA), and the miscible cellulose-based composite films (PVA-MICA and PVA-MIPA) showed good phase compatibility, light transmission, thermal stability (maximum thermal decomposition temperature >300 °C), biocompatibility, biological cell activity (no cytotoxicity), nonleachability, antimicrobial activity, and mechanical properties (maximum fracture elongation at >390%).

New indoleacetic acid-functionalized soluble oxidized starch-based nonionic biopolymers as natural antibacterial materials.

This study aims to develop a new soluble oxidized starch-based nonionic antibacterial polymer (OCSI) featuring high antibacterial activity and non-leachability by grafting indoleacetic acid monomer (IAA) onto the oxidized corn starch (OCS). The synthesized OCSI was characterized analytically by Nuclear magnetic resonance H-spectrometer (1H NMR), Fourier transform infrared spectroscopy (FTIR), Ultraviolet-visible spectroscopy (UV-Vis), X-ray diffractometer (XRD), X-ray Photoelectron Spectroscopy (XPS), Scanning Electronic Microscopy (SEM), Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). The results showed that the synthesized OCSI was endowed with high thermal stability and favorable solubility, and the substitution degree reached 0.6. Besides, the disk diffusion test revealed a lowest OCSI inhibitory concentration of 5 µg disk-1, and showed significant bactericidal activity against Gram-positive bacteria (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli). Moreover, the antibacterial films (OCSI-PCL), featuring their good compatibility, mechanical properties, antibacterial activity, non-leachability, and low water vapor permeability (WVP), were also successfully prepared by blending OCSI with biodegradable polycaprolactone (PCL). Finally, CCK-8 assay results confirmed the excellent biocompatibility of the OCSI-PCL films. Overall, this very study evidenced the applicability of the obtained oxidized starch-based biopolymers as an eco-friendly non-ionic antibacterial material and confirmed their promising applications in areas including biomedical materials, medical devices, and food packaging.

Sustainable leather making - An amphoteric organic chrome-free tanning agents based on recycling waste leather.

Currently, globally, 90 % of the tannery is still tanned by using chrome, resulting in chromium-containing wastewater and chromium-containing solid waste that will cause serious harm to the environment. Under the pressure of environmental protection, on the one hand, the leather manufacturing industry should to dispose the current problem of chromium pollution, especially chromium-containing solid waste (chromium-containing waste leather (CCWL)), on the other hand, to popularize chrome-free tanning agent. Organic chrome-free tanning agents are the way forward for chrome-free tanning agents. However, organic chrome-free tanning agents exhibit several limitations with respect to their preparation and applications: The preparation process is not eco-friendly, and physicochemical properties of tanned crust leather are poor. More importantly, the leather tanned by an organic chrome-free tanning agent has low absorptivity of traditional anionic wet finishing materials, resulting in high total dissolved solids in tannery wastewater, which increased the difficulty of tannery wastewater treatment, and posed a potential threat to the environment. In this study, collagen polypeptide (CP) was extracted by using in situ dechromization and industrial trypsin from CCWL, followed by modification with ethylene glycol diglycidyl ether (EGDE) to obtain an epoxy-terminated, biomass-based, amphoteric organic, chrome-free tanning agent (CP-EGDE) with a high isoelectric point of 5.16, and an epoxy value of 0.316 mol/100 g. CP-EGDE can be applied in the pickling-free and salt-free tanning processes to prepare wet white leather and the tannery wastewater with good degradability. The shrinkage temperature (Ts = 84.9 °C), grain flatness, fullness, softness, yellowing resistance, mechanical properties, absorptivity of traditional anionic fatliquor (88.4 %) and dyes (95.3 %) of CP-EGDE tanned leather exceeded those of commercial organic chrome-free tanning agents. This research considered both environmental protection and leather quality, especially greatly improving the absorptivity of traditional anionic wet finishing materials. CP-EGDE is expected to replace chrome tanning agents and has good application prospects.

Silver Nanoparticle-Loaded Gelatin-Based Nanocomposite Films toward Enhanced Mechanical Properties and Antibacterial Activity.

Gelatin (GH) is a natural polymer material with unique physical, chemical, and biological properties that render it a good base material for biomedical material production. Herein, Ag nanoparticles (NPs) were loaded onto a waterborne polyurethane-GH composite (WPU-g-GH) to prepare a GH-based nanocomposite (AgNP/WPU-g-GH) films). The prepared nanocomposite films were characterized using several analyses including Fourier transform infrared spectroscopy, ultraviolet-visible spectroscopy, X-ray diffraction, transmission emission microscopy, mechanical strength tests, and other analyses. The results demonstrated that the nanocomposite films had high mechanical strength, good thermal stability, and controllable biodegradability. In particular, when the AgNP loading content was 0.03%, the tensile strength, elongation at break, and average particle size of the nanocomposite film reached 45.13 MPa, 476.04%, and 13.02978 ± 1.64406 nm, respectively. Disk diffusion and cytotoxicity analyses revealed that the nanocomposite films exhibited significant antibacterial activity against Gram-negative and Gram-positive bacteria without affecting the cell viability of fibroblasts. These findings indicate that the nanocomposite films with high mechanical strength and antibacterial activity could be used for wound management, tissue adhesion, and biomaterial surface coating.

High-mechanical strength carboxymethyl chitosan-based hydrogel film for antibacterial wound dressing.

Hydrogels, being highly biocompatible and adaptable with biological tissues, have shown great usability in biomedical applications. In this research, a novel hydrogel film developed from carboxymethyl chitosan (CMCS) loaded with waterborne polyurethane-gelatin hydrolysate was synthesized via aqueous emulsion copolymerization. The synthesized hydrogel film was characterized using mechanical strength tests, FTIR, XPS, SEM, AFM, and various other analysis technologies. The results demonstrated that the hydrogel film exhibited good thermal stability, swelling behavior, as well as controllable biodegradability. Specifically, when the CMCS content was loaded at 6 %, the maximum tensile strength and elongation at the break of the hydrogel film were reached 31.69 MPa and 447.187, respectively. The disk diffusion tests indicated that the hydrogel film presented significant antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). These results indicate that hydrogel films with high mechanical strength and high antibacterial activity could be used for wound dressing applications.

Novel multi-stimuli responsive functionalized PEG-based co-delivery nanovehicles toward sustainable treatments of multidrug resistant tumor.

The efficacy of ongoing anticancer treatment is often compromised by some barriers, such as low drug content, nonspecific release of drug delivery system, and multidrug resistance (MDR) effect of tumors. Herein, in the research a novel functionalized PEG-based polymer cystine-(polyethylene glycol)2-b-(poly(2-methacryloyloxyethyl ferrocenecarboxylate)2) (Cys-(PEG45)2-b-(PMAOEFC)2) with multi-stimuli sensitive mechanism was constructed, in which doxorubicin (DOX) was chemical bonded through Schiff base structure to provide acid labile DOX prodrug (DOX)2-Cys-(PEG45)2-b-(PMAOEFC)2. Afterwards, paclitaxel (PTX) and its diselenide bond linked PTX dimer were encapsulated into the prodrug through physical loading, to achieve pH and triple redox responsive (DOX)2-Cys-(PEG45)2-b-(PMAOEFC)2@PTX and (DOX)2-Cys-(PEG45)2-b-(PMAOEFC)2@PTX dimer with ultrahigh drugs content. The obtained nanovehicles could self-assemble into globular micelles with good stability based on fluorescence spectra and TEM observation. Moreover, there was a remarkable "reassembly-disassembly" behavior caused by phase transition of micelles under the mimic cancerous physiological environment. DOX and PTX could be on-demand released in acid and redox stress mode, respectively. Meanwhile, in vivo anticancer studies revealed the significant tumor inhibition of nanoformulas. This work offered facile strategies to fabricate drug nanaovehicles with tunable drug content and types, it has a profound significance in overcoming MDR effect, which provided more options for sustainable cancer treatment according to the desired drug dosage and the stage of tumor growth.

Biodegradable waterborne polyurethane grafted with gelatin hydrolysate via solvent-free copolymerization for potential porous scaffold material.

One potential porous scaffold material based on polyester waterborne polyurethane (PEUR) grafted with modified gelatin hydrolysate (GH) has been investigated in this research. First, the GH was modified with a silane coupling agent (KH550), and then the modified GH was mixed with pre-polymer emulsion of PEUR to obtain the PEUR grafted GH emulsion (PEUR-g-GH). The synthesized PEUR-g-GH emulsions were characterized by stability analysis and viscosity test. Moreover, the film-forming property of PEUR-g-GH has also been studied, and the PEUR-g-GH films were characterized regarding the water resistance, solvent resistance, mechanical properties, FTIR, AFM, SEM, DMA, TGA and contact angle testing. Finally, the bioactivity and biodegradation were investigated by soaking PEUR-g-GH scaffolds in simulated body fluid (SBF). The results indicated that the PEUR-g-GH emulsion has good stability, water resisting (the contact angle was over 90o), the PEUR-g-GH showed excellent film-forming, high storage modulus, good structural homogeneity and thermal stability (the temperature of maximum weight loss was over 350 °C). The freeze-dried sample showed porous structure, and the mutual crosslinking of layers can contribute to a good bearing capacity for scaffold. The SBF biodegradability revealed that the biodegradation rate and degree of films gradually increased with the content of GH increased. In addition, the cells on the material were markedly enhanced, and most of cells have proliferated and formed vesicles, which shown a good biocompatibility.

The oxidation of potato starch by Electro-Fenton system in the presence of Fe(II) ions.

An efficient method was developed to prepare oxidized potato starch under the pasting point by Electro-Fenton system, in which a complex of sodium citrate and Fe2+ (SC-Fe2+) was used as catalyst, and H2O2 was used as oxidant. In the preparation process the oxidation degree of starch was controlled by the molar ratios of SC-Fe2+ and hydrogen peroxide. The structures and thermal properties of the prepared oxidized starch were characterized by FT-IR, XRD, SEM, DSC and DTG. The characterization results indicated that the obtained oxidized potato starch owned one grainy molecule structure, and displayed a high viscosity (not less than 63 Pa·s) by comparing to the raw starch. The carbonyl and carboxyl contents of oxidized potato starch achieved 0.81 per 100 AGU and 0.79 per 100 AGU, respectively after the raw starch was oxidized. And the oxidized starch showed good thermal stability, which can dramatically improve the application performance of starch-based biomaterials.

Recovery and utilization of collagen protein powder extracted from chromium leather scrap waste.

In this work, we investigate collagen protein powder (CPP) extracted from chromium leather scrap waste (CLSW). The composition and molecular weight distribution of CPP were determined by elemental analysis and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), respectively. The microstructure and size distribution of CPP were then characterized by scanning electron microscopy (SEM) and nanometer analyzer instrument. Finally, CPP was treated with corn starch (CS), and the swelling behavior of the resulting CPP-CS blend was investigated in order to determine its range of applications. The experimental data showed that CPP contains 13 different amino-acids. CPP also displayed low mineral salt levels and a nitrogen content of 43.84%, indicating its potential use as an organic fertilizer. The molecular weight range of CPP is 6.5 to ~ 26.6 kDa. After the obtained CPP was blended with CS, the CPP-CS blend is endowed with optimal swelling properties and is able to overcome the solubility drawbacks of CPP alone. In addition, when the CPP was used as a natural fertilizer, the germination rate and height of kidney beans obviously increased.

The structure and properties of granular cold-water-soluble starch by a NaOH/urea aqueous solution.

The NaOH/urea treatment of starch results in granular cold-water-soluble starch (GCWSS). The research indicated that the optimized condition for this treatment was aqueous solution of 14% w/v NaOH and 12% w/v urea (all dosages based on starch weight) at ambient temperature (25 °C) for 10 min with stirring. The aqueous solution was then treated a water-extraction and alcohol-precipitation method. The solid sample was dried in an oven at 60 °C. The GCWSS displayed a cold-water solubility of ~90%. The GCWSS had lower amylose content. Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction also indicated that it was an amorphous solid with a V-type pattern (single-helix). The NaOH/urea solution could destroy the inter and intra hydrogen bonding of starch thereby decreasing glass transition temperature, and improve the cold water solubility of native starch.

Biodegradable films based on gelatin extracted from chrome leather scrap.

A biodegradable film based on gelatin extracted from chrome leather scrap was studied in this paper. According to the results of a variety of characterization, the extracted gelatin contains 13 kinds of amino acid; the chrome content is 30mg/kg, mineral and salt content are both at low levels and the nitrogen content is 43.84%. Its molecular weight has been measured at about 6.5kDa ∼26.6kDa, and the average particle distribution appears to be 125nm with a narrow distribution. When the extracted gelatin was modified with the ß-cyclodextrin to prepare the biodegradable films, the ß-cyclodextrin and gelatin blends can build up perfect compatibility and film-forming properties. Comparing to the gelatin film without ß-cyclodextrin, the viscosity, biodegradability, thermal stability and physical properties of the ß-cyclodextrin and gelatin blends in the present research were significantly increased, especially when the ratio of ß-cyclodextrin to gelatin was 1:2, the biodegradation rates reached 81%, elongation at break 15.74% and the tensile strength 122.34MPa. The blends show perfect swelling properties and overcome the rapid solubility drawback of extracted gelatin.