Photocontrolled Hierarchical Self-Assembly of Anisotropic Micropatterns of Nanofibers onto Isotropic Surfaces.

Hierarchical self-assembly is achieved using a visible light triggered photoreaction. A pro-gelator, α-diketone-2,3-didecyloxyanthracene, is photoconverted into a low molecular weight gelator, 2,3-didecyloxyanthracene (DDOA), that self-assembles into nanofibers. Spatial confinement and patterns of these nanofibers onto a surface are achieved by localizing initial nucleation with a focused laser and photogenerate subsequent fiber growth with the laser or gentler wide-field irradiation. Remarkably, collective growth of nanofibers results in anisotropic micropatterns with orientation factors (OF) reaching 79%, resulting in collective emission of linearly polarized light. The OF, distance of collective growth and fiber density, are controlled by the photoirradiation conditions and the balance of interactions between DDOA aggregates and the glass surface. An unprecedented juxtaposition of orthogonally oriented nanofiber patterns on an isotropic surface is achieved with individual control of the fibers' main direction. In perspective, this photochemical method can be extended to a large variety of self-assembling molecules.

Nanofiber-Directed Anisotropic Self-Assembly of CdSe-CdS Quantum Rods for Linearly Polarized Light Emission Evidenced by Quantum Rod Orientation Microscopy.

Hybrid soft materials composed of CdSe-CdS nanorods or "quantum rods" (QRs) and the fluorescent 2,3-didecyloxyanthracene (DDOA) low molecular weight organogelator are obtained through self-assembly. Spectroscopy, microscopy, and rheology studies show that the QRs and DDOA coassemble, thereby stabilizing the organogels. Depending on the QR load and excitation wavelength, single nanofibers (NFs) of the hybrid gel display either sharp polarized red luminescence (under green excitation), or dual perpendicularly polarized blue and red emissions (under UV excitation). Transmission electron microscopy, microspectroscopy, and quantum rod orientation microscopy (QROM) reveal that QRs align along the organogel NFs with order parameters reaching 76% and 87%. This paves the way for obtaining surfaces of QR/NF assemblies yielding sharp red linearly polarized emission. In addition, this work demonstrates that QRs can be used more generally to probe nanostructured soft materials, even nonemissive ones. QROM allows to establish maps of the orientation of single QRs dispersed onto or within a gel network by measuring the polarization of the emission of the individual QRs. As occurs within this work in which QRs and NFs interact, the orientation of each QR reveals information on the underlying nanostructure (such as surface striation, bundle formation, and helicity).

Kinetic selection between organogel fibers and nano-ribbons of 2,3-didecyloxy-9,10-bisphenylethynyl-anthracene.

A novel organogelator, DDPEA (2,3-didecyloxy-9,10-bisphenylethynyl-anthracene), displays a very unusual polymorphism upon self-assembly. The fluorescence resulting from J-aggregates reveals that the readily formed DDPEA gel evolves into another more stable state within four hours. Confocal fluorescence microscopy shows that this kinetic metastable gel-state is constituted of nanofibers, while the thermodynamically stable state is constituted of a dispersion of nano-ribbons or -crystals. Nano-fibers or nano-ribbons can be selected upon trapping the states by drying.

Effect of hydrogen-bonding on the excited-state reactivity of fullerene derivatives and its impact on the control of the emission polarisation from photopolic single crystals.

The kinetics of the irreversible photoinduced switch in polarisation (p) observed in single crystals of a fullerene derivative possessing hydrogen-bonding barbiturate units were investigated using confocal fluorescence microscopy. In the samples investigated, it was found that the maximum luminescence polarisation (p = 0.78) is obtained for an orientation of ca. 60° from the long axis of the crystal. Upon irradiation at 385 nm, the maximum luminescence polarisation undergoes a rotation of ca. 70° with respect to the initial orientation and reaches a new value of p = 0.40. The results indicate that the process is not dependent on the orientation of the incident polarised excitation beam and that it is not accompanied by a noticeable change in the photophysical properties of the crystal. Based on these observations, a mechanism is proposed in which photoinduced dimerisation occurs from the lowest energy emissive excimer-like state that acts as a sink for the excitation energy.

Multifunctional Anthracene-Based Ni-MOF with Encapsulated Fullerenes: Polarized Fluorescence Emission and Selective Separation of C70 from C60.

We report an anthracene-based Ni-MOF [Ni(II) metal-organic framework, {[Ni(µ2-L)2Cl2]·x(C6H6)·y(MeOH)}n (1), L = anthracene-9,10-diylbis(methylene)diisonicotinate] whose crystal structure reveals the presence of hexagonal channels with a pore size of 1.4 nm that can accommodate guests such as C60 and C70. Both confocal fluorescence and Raman microscopy results are in agreement with a homogeneous distribution of fullerenes throughout the single crystals of 1. Efficient energy transfer from 1 to the fullerenes was observed, which emitted partially polarized fluorescence emission. Stronger binding between 1 and C70 versus C60 was confirmed from HPLC analysis of the dissolved material and provides a basis for the selective retention of C70 in liquid chromatography columns packed with 1.

Supramolecular gating of TADF process in self-assembled nano-spheres for high-resolution OLED applications.

Acridine-based donor-acceptor chromophores exhibiting E-type delayed fluorescence were substituted with bis-biuret H-bonding motifs to induce the formation of hollow spheres which can be deposited from solution to form the active component of OLED devices. In solution, the contribution of the delayed component is sensitive to disruption of the aggregates.

Narcissistic self-sorting of n-acene nano-ribbons yielding energy-transfer and electroluminescence at p-n junctions.

The 2,3-didecyloxy derivative of an n-type anthracene (n-BG) and a p-type tetracene (p-R) have been synthesized and their self-assembly into nano-ribbons studied. Hyperspectral fluorescence imaging revealed their narcissistic self-sorting, leading to separated nanoribbons emitting with very different colors (blue or green for n-BG, depending on the growth solvent, and red for p-R). It is unique that the usual origins of self-sorting, such as specific H-bonding, different growth kinetics, or incompatible steric hindrance can be ruled out. Hence, the narcissistic behaviour is herein proposed to originate from a so-far unconsidered cause: the discrepancy between the quadrupolar character of n-BG and dipolar character of p-R. At the p-n junctions of these nanoribbons, inter-ribbon FRET and electro-luminescence switch-on were observed by fluorescence/luminescence microscopy.

White-light-emitting self-assembled nanofibers and their evidence by microspectroscopy of individual objects.

The self-assembly of a blue-emitting light-harvesting organogelator and specifically designed highly fluorescent tetracenes yields nanofibers with tunable emissive properties. In particular, under near-UV excitation, white light emission is achieved in organogels and dry films of nanofibers. Confocal fluorescence microspectroscopy demonstrates that each individual nanofiber emits white light. A kinetic study shows that an energy transfer (ET) occurs between the blue-emitting anthracene derivative and the green- and red-emitting tetracenes, while inter-tetracene ETs also take place. Moreover, microscopy unravels that the nanofibers emit polarized emission in the blue spectral region, while at wavelengths higher than 500 nm the emission is not significantly polarized.

Self-assembly of supramolecular fullerene ribbons via hydrogen-bonding interactions and their impact on fullerene electronic interactions and charge carrier mobility.

The anisotropy of the electronic interactions between fullerenes in crystalline solids was examined using a confocal fluorescence microscope by probing the polarization of the fluorescence emission arising from fullerene excimer-like emitting states. Crystals of C(60) obtained by vacuum-sublimation or from chloroform solution exhibited no or little polarization (p = 0 or 0.11, respectively), as expected from the high symmetry of the C(60) fcc lattice or the low degree of anisotropy induced by included solvent molecules. The use of hydrogen-bonding to supramolecularly control interfullerene electronic interactions was explored using a fullerene derivative (1) combining a solubilizing 3,4-di-tert-butylbenzene group and a barbituric acid hydrogen-bonding (H-B) moiety. The crystal structure of 1 establishes the existence of fullerene H-B tapes along which interfullerene electronic interactions are expected to be large. In agreement with this, we observe very strong polarization of the fullerene excimer-like emission (p = 0.78), indicative of a high degree of anisotropy in the fullerene interactions. The charge-carrier mobility of 1 as determined from OFET devices was found to be lower than that of C(60) (1.2 x 10(-4) vs 1.2 x 10(-2) cm(2)/s V), which is rationalized on the basis of the reduced dimensionality of 1 as a wire-like semiconductor and variations in the morphology of the device active layer revealed by AFM measurements.

Time-resolved confocal fluorescence microscopy of trinitrobenzene-responsive organic nanofibers.

Time-resolved confocal fluorescence microscopy is used to image and analyze quantitatively the influence of 1,3,5-trinitrobenzene on the fluorescence of organic nanofibers. These nanofibers are formed by self-assembly of 2,3-didecyloxyanthracene in methanol or from solutions drop-casted onto glass surfaces. Amplification of the fluorescence quenching emerges in the nanofibers as compared to the constituting monomer thus leading to efficient detection of nanomolar concentrations of TNB. The emission of dry nanofibers on glass is also efficiently quenched by vapors of TNB.

A fluorous sodium l-prolinate derivative as low molecular weight gelator for perfluorocarbons.

We report the first study dealing with the self-assembly of an α-amino acid derivative in perfluorocarbons. Rheology, microscopy, and spectroscopy studies reveal that the fluorous sodium l-prolinate derivative 1 self-assembles in perfluorocarbons to form a three-dimensional network of left-handed nano-helices resulting in solvent gelation. Singlet oxygen lifetime measured in a gel of perfluorodecalin is about 1000 times longer than in pure water.

Striking correlation between the unusual trigonal crystal packing and the ability to self-assemble into nanofibers of 2,3-di-n-alkyloxyanthracenes.

The space group of the crystals of derivatives of 2,3-dialkoxyanthracenes is monoclinic P2(1)/a (herringbone structure) with the linear ethyl or propyl chains but abruptly changes to the trigonal P3 or R3 space group for butyl to heptyl chains. Strikingly, this switch is correlated with the capacity of these compounds to self-assemble into nanofibers and organogels. Besides, compounds with a chain length exceeding seven carbon atoms could not be crystallized in accordance with the analysis of the projected crystal structure but are nevertheless excellent organogelators. The study of this series of compounds suggests a tight link between the molecular structure of the crystals and that of the organogels.

Versatile one-step introduction of multiple hydrogen-bonding sites onto extended pi-conjugated systems.

Unprotected arylbiuret units were smoothly introduced onto pi-conjugated structures to afford new supramolecular materials leading to interpenetrated networks.

Frequency-Selective Photobleaching as a Route to Chromatic Control in Supramolecular OLED Devices.

We report a series of molecules that spontaneously self-organize into small electroluminescent domains of sub-micrometer dimensions when dissolved in tetrahydrofuran. The self-assembled spherical aggregates have an average diameter of 300 nm and exhibit efficient energy transfer from the blue to the green or red component. The aggregates can be chromatically addressed or patterned by selective bleaching of the energy-acceptor component using a laser source. This allows the fabrication of electroluminescence devices by directly photopatterning the active layer without the need of additional steps. Submicron features (700 nm) can be achieved using a collimated light source.

Electroluminescence from Spontaneously Generated Single-Vesicle Aggregates Using Solution-Processed Small Organic Molecules.

Self-assembled aggregates offer great potential for tuning the morphology of organic semiconductors, thereby controlling their size and shape. This is particularly interesting for applications in electroluminescent (EL) devices, but there has been, to date, no reports of a functional EL device in which the size and color of the emissive domains could be controlled using self-assembly. We now report a series of molecules that spontaneously self-organize into small EL domains of sub-micrometer dimensions. By tailoring the emissive chromophores in solution, spherical aggregates that have an average size of 300 nm in diameter and emit any one color, including CIE D65 white, are spontaneously formed in solution. We show that the individual aggregates can be used in EL devices built either using small patterned electrodes or using a sandwich architecture to produce devices emitting in the blue, green, red, and white. Furthermore, sequential deposition of the three primary colors yields an RGB device in which single aggregates of each color are present in close proximity.

Synthesis of 2,3-substituted tetracenes and evaluation of their self-assembling properties in organic solvents.

[structure: see text] Rod-shaped 2,3-di-alkoxytetracenes, soluble in common organic solvents, have been synthesized and studied for their gelling ability in organic solvents and their unusual UV-visible spectroscopic properties.

Photodimers of a soluble tetracene derivative. excimer fluorescence from the head-to-head isomer.

[reaction: see text] Irradiation of 5,12-didecyloxytetracene (1) leads to photodimers P(1) (planosymmetric) and P(2) (centrosymmetric). P(1) is characterized by naphthalene excimer fluorescence, whereas P(2) emits naphthalene monomer fluorescence.