Solving the Puzzle of Unusual Excited-State Proton Transfer in 2,5-Bis(6-methyl-2-benzoxazolyl)phenol.

2,5-Bis(6-methyl-2-benzoxazolyl)phenol (BMP) exhibits an ultrafast excited-state intramolecular proton transfer (ESIPT) when isolated in supersonic jets, whereas in condensed phases the phototautomerization is orders of magnitude slower. This unusual situation leads to nontypical photophysical characteristics: dual fluorescence is observed for BMP in solution, whereas only a single emission, originating from the phototautomer, is detected for the ultracold isolated molecules. In order to understand the completely different behavior in the two regimes, detailed photophysical studies have been carried out. Kinetic and thermodynamic parameters of ESIPT were determined from stationary and transient picosecond absorption and emission for BMP in different solvents in a broad temperature range. These studies were combined with time-dependent- density functional theory quantum-chemical modeling. The excited-state double-well potential for BMP and its methyl-free analogue were calculated by applying different hybrid functionals and compared with the results obtained for another proton-transferring molecule, 2,5-bis(5-ethyl-2-benzoxazolyl)hydroquinone (DE-BBHQ). The results lead to the model that explains the difference in proton-transfer properties of BMP in vacuum and in the condensed phase by inversion of the two lowest singlet states occurring along the PT coordinate.

Combined Picosecond Time-Resolved UV-Vis and NMR Techniques Used for Investigation of the Excited State Intramolecular Triplet-Triplet Energy Transfer.

The phenomenon of the intramolecular triplet-triplet (T-T) energy transfer observed for spiro[9,10-dihydro-9-oxoanthracene-10,2'-5',6'-benzindan] (AN) molecule was investigated using stationary and time-resolved techniques in the UV/vis spectral region. The rate constant for energy transfer from anthrone chromophore to the triplet state localized on the naphthalene subunit of AN molecule is 2.8 × 1010 s-1. NMR spectroscopy is rarely used for investigation of molecules in the electronically excited states. Here, we propose 1H NMR combined with UV laser irradiation as a useful method for the recognition of an electron spin densities distribution in the excited triplet state that exists for tens of microseconds in the liquid phase. The direct registration of the 1H NMR signals from molecules in the excited triplet state was not possible due to its short lifetime. However, even the short interaction between unpaired electrons and nuclear spins leads to the changes in the NMR spectrum. The analysis of difference NMR spectra delivers information about the electron spin densities distribution over the skeleton of the molecule in the excited triplet state. In order to understand the nature of the excited states involved in the triplet-triplet energy transfer process, quantum chemical calculations were performed.

Electron transfer in silicon-bridged adjacent chromophores: the source for blue-green emission.

Si-Bridged chromophores have been proposed as sources for blue-green emission in several technological applications. The origin of this dual emission is to be found in an internal charge transfer reaction. The current work is an attempt to describe the details of these processes in these kinds of substances, and to design a molecular architecture to improve their performance. Nuclear motions essential for intramolecular charge transfer (ICT) can involve processes from twisted internal moieties to dielectric relaxation of the solvent. To address these issues, we studied ICT between adjacent chromophores in a molecular compound containing N-isopropylcarbazole (CBL) and 1,4-divinylbenzene (DVB) linked by a dimethylsilylene bridge. In nonpolar solvents emission arises from the local excited state (LE) of carbazole whereas in solvents of higher polarity dual emission was detected (LE + ICT). The CT character of the additional emission band was concluded from the linear dependence of the fluorescence maxima on solvent polarity. Electron transfer from CBL to DVB resulted in a large excited-state dipole moment (37.3 D) as determined from a solvatochromic plot and DFT calculations. Steady-state and picosecond time-resolved fluorescence experiments in butyronitrile (293-173 K) showed that the ICT excited state arises from the LE state of carbazole. These results were analyzed and found to be in accordance with an adiabatic version of Marcus theory including solvent relaxation.

Substituent and solvent effects on the excited state deactivation channels in anils and boranils.

Differently substituted anils (Schiff bases) and their boranil counterparts lacking the proton-transfer functionality have been studied using stationary and femtosecond time-resolved absorption, fluorescence, and IR techniques, combined with quantum mechanical modelling. Dual fluorescence observed in anils was attributed to excited state intramolecular proton transfer. The rate of this process varies upon changing solvent polarity. In the nitro-substituted anil, proton translocation is accompanied by intramolecular electron transfer coupled with twisting of the nitrophenyl group. The same type of structure is responsible for the emission of the corresponding boranil. A general model was proposed to explain different photophysical responses to different substitution patterns in anils and boranils. It is based on the analysis of changes in the lengths of CN and CC bonds linking the phenyl moieties. The model allows predicting the contributions of different channels that involve torsional dynamics to excited state depopulation.

Arresting consecutive steps of a photochromic reaction: studies of ß-thioxoketones combining laser photolysis with NMR detection.

Photochromism of monothiodibenzoylmethane has been studied in a number of environments at different temperatures. Direct laser irradiation of a sample located in the NMR magnet allowed in situ monitoring of the phototransformation products, determining their structure, and measuring the kinetics of the back reaction. These observations, along with the data obtained using electronic and vibrational spectroscopies for rare gas matrix-isolated samples, glasses, polymers, and solutions, as well as the results of quantum-chemical calculations, provide insight into the stepwise mechanism of the photochromism in ß-thioxoketones. At low temperature in rigid matrices the electronic excitation leads to the formation of the -SH exorotamer of the (Z)-enethiol tautomer. In solutions, further steps are possible, producing a mixture of two other non-chelated enethiol forms. Photoconversion efficiency strongly depends on the excitation wavelength. Analysis of the mechanisms of the photochromic processes indicates a state-specific precursor: chelated thione-enol form in the excited S2(ππ*) electronic state. The results show the potential of using laser photolysis coupled with NMR detection for the identification of phototransformation products.

Unusual, solvent viscosity-controlled tautomerism and photophysics: meso-alkylated porphycenes.

Stationary and time-resolved studies of 9,10,19,20-tetramethylporphycene and 9,10,19,20-tetra-n-propylporphycene in condensed phases reveal the coexistence of trans and cis tautomeric forms. Two cis configurations, cis-1 and cis-2, play a crucial role in understanding the excited-state deactivation and tautomer conversion dynamics. The trans-trans tautomerization, involving intramolecular transfer of two hydrogen atoms, is extremely rapid (k ≥ 10(13) s(-1)), both in the ground and lowest electronically excited states. The cis-1-trans conversion rate, even though the process is thermodynamically more favorable, is much slower and solvent-dependent. This is explained by the coupling of alkyl group rotation with the hydrogen motion. Excited-state deactivation is controlled by solvent viscosity: the S(1) depopulation rate decreases by more than 2 orders of magnitude when the chromophore is transferred from a low-viscosity solution to a polymer film. Such behavior confirms a model for excited state deactivation in porphycene, which postulates that a conical intersection exists along the single hydrogen transfer path leading from the trans to a high energy cis-2 tautomeric form. For this process, the tautomerization coordinate includes not only hydrogen translocation but also large-amplitude twisting of the two protonated pyrrole moieties attached to the opposite sides of the ethylene bridge.

On the origin of radiationless transitions in porphycenes.

A model for the radiationless deactivation of porphycenes has been proposed based on the theoretical prediction that the lowest electronic state of one of the cis tautomeric forms corresponds to an open-shell nonplanar structure. The radiationless channel is provided by crossing of the potential energy surfaces of the ground and lowest excited states along the hydrogen-transfer coordinate. The model explains the large dependence of fluorescence of several porphycenes on viscosity. It also allows prediction of the emissive properties for differently substituted porphycenes.

Fibronectin adsorption and arrangement on copolymer surfaces and their significance in cell adhesion.

The adsorption of fibronectin (FN) to (styrene/methyl methacrylate) copolymer surfaces, both sulfonated (hydrophilic) and nonsulfonated (hydrophobic), was studied by means of the radioisotope (125I-FN) and ELISA assays; the latter employed monoclonal antibodies. It was found that the radioiodination-derived isotherms did not follow the Langmuir-type adsorption law within the FN concentration range studied; rather, a quasi-linear FN surface density versus bulk concentration dependence was observed. These isotherms, and our recent ELISA measurements with polyclonal antibodies, allowed us to estimate saturative FN surface densities, which were, within the experimental error, similar on both types of surfaces. This suggested the amount of adsorbed FN to be not responsible for observed differences in leukaemia L1210 cell adhesion (FN-coated sulfonated surfaces are far more pro-adhesive than their nonsulfonated analogues). The presumption that these differences are induced by changes in the FN arrangement was confirmed by the use of monoclonal antibodies directed against distinct FN domains, and by the blocking of alpha5beta1 integrin receptor with the synthetic Gly-Arg-Gly-Asp-Ser-Pro (GRGDSP) peptide. The RGD sequence located within the FN cell-binding domain seems to be masked in the structure adopted on nonsulfonated surfaces, which hinders the integrin-ligand interaction.

Albumin adsorption on unmodified and sulfonated polystyrene surfaces, in relation to cell-substratum adhesion.

Albumin is commonly applied for blocking the adsorption of other proteins and to prevent the nonspecific adhesion of cells to diverse artificial substrata. Here we address the question of how effective these albumin properties are--by investigating unmodified and sulfonated polystyrene substrata with distinctly different wettabilities. As clearly shown with (125)I-radioisotopic assays, above a concentration of 10-20 µg/mL, the efficiency of bovine serum albumin (BSA) adsorption became markedly higher on the sulfonated surface than on the unmodified one. This study was assisted with the atomic force microscopy. On the unmodified surface, BSA, adsorbed from sufficiently concentrated solutions, formed a monolayer, with occasional intrusions of multilayered patches. Conversely, the arrangement of BSA on the sulfonated surface was chaotic; the height of individual molecules was lower than on the unmodified polystyrene. Importantly, the adhesion study of LNCaP and DU145 cells indicated that both surfaces, subjected to the prior BSA adsorption, did not completely loose their cell-adhesive properties. However, the level of adhesion and the pattern of F-actin organization in adhering cells have shown that cells interacted with unmodified and sulfonated surfaces differently, depending on the arrangement of adsorbed albumin. These results suggest the presence of some bare substratum area accessible for cells after the albumin adsorption to both types of investigated surfaces.

Atomic force microscopy evidence for conformational changes of fibronectin adsorbed on unmodified and sulfonated polystyrene surfaces.

The effect of polystyrene surface polarity on the conformation of adsorbed fibronectin (FN) has been studied with atomic force microscopy. We demonstrated that bare sulfonated and nonsulfonated polystyrene surfaces featured similar topographies. After the FN adsorption, direct comparison of both types of substrata revealed drastically different topographies, roughness values, and also cell-adhesive properties. This was interpreted in terms of FN conformational changes induced by the surface polarity. At high-solute FN concentrations the multilayer FN adsorption took place resulting, for the sulfonated substratum, in an increase of surface roughness, whereas for the nonsulfonated one the roughness was approximately stable. Conversely, the FN conformation characteristic for the first saturative layer tended to be conserved in the consecutive layers, as evidenced by height histograms. The height of individual FN molecules indicated, consonantly with the derived thickness of the adsorbed protein layer (the latter value being 1.4 nm and 0.6 nm, respectively, for an unmodified and sulfonated polystyrene surface), that molecules are flattened on polar surfaces and more compact on nonsulfonated ones. It was also demonstrated that the FN adsorption and conformation on polymeric substrata, and hence the resultant cell-adhesive properties, depended on the chemistry of the original surface rather than on its topography. Our results also demonstrated the ability of surface polarity to influence the protein conformation and its associated biological activity.

Semiquantitative evaluation of fibronectin adsorption on unmodified and sulfonated polystyrene, as related to cell adhesion.

The process of human fibronectin (FN) adsorption on nonsulfonated and sulfonated polystyrene surfaces was studied in relation to mechanisms of L1210 cell adhesion. Radioisotope assays directed towards FN, as well as ELISA measurements of adsorbed FN and bovine serum albumin (BSA) were carried out. (125)I radioisotope assays led to linear FN adsorption isotherms. When combined to ELISA measurements for FN, they revealed the multilayer adsorption. Results indicated a large difference in the saturating first-layer surface density of FN adsorbed on sulfonated and nonsulfonated polystyrene surfaces: significantly (ca. factor of 5) less FN molecules are necessary to complete a monolayer on sulfonated than on nonsulfonated polystyrene. This suggests an unfolded conformation of FN on sulfonated polystyrene, and a more compact one on the nonsulfonated polymer. Significant conformational changes of FN are also indicated by the following: (1) early phase of cell adhesion to FN adsorbed on sulfonated polystyrene surfaces is significantly (ca. factor of 6) higher than to FN on nonsulfonated surfaces, and in the former case adhesion proceeds mostly via alpha(5)beta(1) integrins; (2) RGD, the crucial fragment within central cell binding domain, seems to be partially hidden in the protein structure adopted on nonsulfonated surfaces; (3) patterns of F-actin organization differ in cells adhering to FN on sulfonated and nonsulfonated surfaces. The ELISA study directed against BSA (this protein always present on the surface after the adsorption of FN), showed the importance of "free area," uncovered by both proteins, which influence the cell adhesion processes.

An experimental test of C-N bond twisting in the TICT state: syn-anti photoisomerization in 2-(N-methyl-N-isopropylamino)-5-cyanopyridine.

A previously untested essential consequence of the "TICT" (twisted internal charge transfer) interpretation of the nature of the "anomalous" excited state of p-dimethylaminobenzonitrile (1) and related compounds has now been verified: at -90 degreesC, the dual fluorescence of a desymmetrized analogue, 2-(N-methyl-N-isopropylamino)-5-cyanopyridine (2), in methanol (MeOH) is accompanied by syn-anti isomerization around the C-N bond, whereas its ordinary fluorescence in tetrahydrofuran is not.

Adsorption characteristics of human plasma fibronectin in relationship to cell adhesion.

Adsorption of human plasma fibronectin (FN) on nonsulfonated and sulfonated polymer surfaces was studied, by using a polyclonal antiserum to FN and the ELISA method. ELISA signal was recorded as a function of FN concentration in solutions. The concentration dependence of FN binding shows the saturation effect in the range 5-10 microg/mL. ELISA data are discussed in the terms of a self-assembled monolayer and different conformations of the FN molecule. The early adhesion of L1210 cells to polymer surfaces after prior adsorption of FN on these surfaces was studied under static conditions. In the case of FN adsorbed on sulfonated surfaces, the relative number of adhering cells increased with the increase of the interfacial surface tension (i.e., the cell adhesion depends on the surface density of sulfonic groups). However, in the case of FN adsorbed on nonsulfonated surfaces, the relative number of adhering cells was low and independent on the interfacial surface tension. The alpha(5)beta(1)-integrin blocking by a monoclonal antibody resulted in a strong inhibition of the cell adhesion to FN adsorbed on sulfonated polymer surfaces. This indicates that cell adhesion to FN adsorbed on these surfaces is mostly mediated by the alpha(5)beta(1)-integrin. In contrast, in the case of FN adsorbed on nonsulfonated surfaces the cell adhesion was not inhibited by the alpha(5)beta(1)-integrin blocking.