RESUMO
Synthetic iron-sulfur cubanes are models for biological cofactors, which are essential to delineate oxidation states in the more complex enzymatic systems. However, a complete series of [Fe4S4]n complexes spanning all redox states accessible by 1-electron transformations of the individual iron atoms (n = 0-4+) has never been prepared, deterring the methodical comparison of structure and spectroscopic signature. Here, we demonstrate that the use of a bulky arylthiolate ligand promoting the encapsulation of alkali-metal cations in the vicinity of the cubane enables the synthesis of such a series. Characterization by EPR, 57Fe Mössbauer spectroscopy, UV-visible electronic absorption, variable-temperature X-ray diffraction analysis, and cyclic voltammetry reveals key trends for the geometry of the Fe4S4 core as well as for the Mössbauer isomer shift, which both correlate systematically with oxidation state. Furthermore, we confirm the S = 4 electronic ground state of the most reduced member of the series, [Fe4S4]0, and provide electrochemical evidence that it is accessible within 0.82 V from the [Fe4S4]2+ state, highlighting its relevance as a mimic of the nitrogenase iron protein cluster.
Assuntos
Materiais Biomiméticos , Coenzimas , Hidrocarbonetos , Ferro , Nitrogenase , Enxofre , Materiais Biomiméticos/síntese química , Materiais Biomiméticos/química , Coenzimas/síntese química , Coenzimas/química , Hidrocarbonetos/síntese química , Hidrocarbonetos/química , Ferro/química , Nitrogenase/química , Oxirredução , Enxofre/químicaRESUMO
A mini organic redox-flow battery pluggable on the basis of a high-resolution nuclear magnetic resonance probehead has been conceived and built mainly by 3D printing. This device allows the realization of all modern spectroscopy experiments as well as imaging experiments. It has been tested for the real-time monitoring of redox cycling of 9,10-anthraquinone-2,7-disulfonic acid disodium salt (2,7-AQDS) in acidic conditions, which has revealed the preponderant role of dimerization in the processes of oxidation and reduction. Determination of the thermodynamic properties of homo- and heterodimer formation through quantum chemical, multilevel modeling workflows confirms our hypotheses about the molecular processes occurring during charge and discharge.
RESUMO
The introduction of lithiated components with different 7Li/6Li isotopic ratios, also called isotopic tracing, can give access to better understanding of lithium transport and lithiation processes in lithium-ion batteries. In this work, we propose a simple methodology based on high-resolution solid-state NMR for the determination of the 7Li/6Li ratio in silicon electrodes following different strategies of isotopic tracing. The 6Li and 7Li MAS NMR experiments allow obtaining resolved spectra whose spectral components can be assigned to different moieties of the materials. In order to measure the ratio of the 6Li/7Li NMR integrals, a silicon electrode with a natural 7Li/6Li isotope abundance was used as a reference. This calibration can then be used to determine the 7Li/6Li ratio of any similar samples. This method was applied to study the phenomena occurring at the interface between a silicon electrode and a labeled electrolyte, which is an essential step for isotopic tracing experiments in systems after the formation of the solid electrolyte interphase (SEI). Beyond the isotopic exchanges between the SEI and the electrolyte already observed in the literature, our results show that isotopic exchanges also involve Li-Si alloys in the electrode bulk. Within a 52-hour contact, the electrolyte labeling disappeared: isotopic concentrations of the electrolyte and electrode become practically homogenized. However, at the electrode level, different silicides are characterized by rather different isotopic enrichment. In the present work, ToF SIMS and liquid state NMR were also used to cross-check and discuss the solid-state NMR method we have proposed.
RESUMO
As the world moves toward electromobility and a concomitant decarbonization of its electrical supply, modern society is also entering a so-called fourth industrial revolution marked by a boom of electronic devices and digital technologies. Consequently, battery demand has exploded along with the need for ores and metals to fabricate them. Starting from such a critical analysis and integrating robust structural data, this review aims at pointing out there is room to promote organic-based electrochemical energy storage. Combined with recycling solutions, redox-active organic species could decrease the pressure on inorganic compounds and offer valid options in terms of environmental footprint and possible disruptive chemistries to meet the energy storage needs of both today and tomorrow. We review state-of-the-art developments in organic batteries, current challenges, and prospects, and we discuss the fundamental principles that govern the reversible chemistry of organic structures. We provide a comprehensive overview of all reported cell configurations that involve electroactive organic compounds working either in the solid state or in solution for aqueous or nonaqueous electrolytes. These configurations include alkali (Li/Na/K) and multivalent (Mg, Zn)-based electrolytes for conventional "sealed" batteries and redox-flow systems. We also highlight the most promising systems based on such various chemistries relying on appropriate metrics such as operation voltage, specific capacity, specific energy, or cycle life to assess the performances of electrodes.
RESUMO
In 1968 Wolfson et al. published the concept for producing energy inside the body using catalytic electrodes exposed to the body fluid as an electrolyte and utilising naturally occurring fuels such as glucose. Since then, the technology has advanced to enhance the levels of power using enzymes immobilised within three-dimensional bioelectrodes that are nanostructured. Current research in the field of enzymatic fuel cells is directed toward applying electrochemical and nanostructural expertise to increase the energy density, to increase the power density, to increase the operational stability, and to increase the voltage output. Nonetheless, biocompatibility remains the major challenge for increasing the life-time for implanted enzymatic biofuel cells. Here, we discuss the current issues for biocompatibility and suggest directions to enhance the design of biofuel cells so as to increase the life-time of implantation whilst maintaining sufficient performance to provide power for implanted medical devices.
Assuntos
Materiais Biocompatíveis , Fontes de Energia Bioelétrica , Nanoestruturas/química , Células 3T3-L1 , Animais , Bactérias/metabolismo , Catálise , Quitosana/química , Eletroquímica , Eletrodos , Eletrólitos , Glucose , Camundongos , NanotecnologiaRESUMO
The interfacing of polyoxometalates and graphene can be considered to be an innovative way to generate hybrid structures that take advantage of the properties of both components. Polyoxometalates are redox-sensitive and photosensitive compounds with high temperature stability (up to 400 °C for some), showing tunable properties depending on the metal incorporated inside the complex. Graphene has a unique electronic band structure combined with good material properties for electrical and optical applications. The spontaneous, rather than electrochemical, functionalization of epitaxial graphene on SiC with Keggin phosphomolybdate derivative TBA3[PMo11O39{Sn(C6H4)C≡C(C6H4)N2}] (named K(Mo)Sn[N2(+)]) bearing a phenyl diazonium unit is investigated. Graphene decoration is evidenced by means of AFM, Raman, XPS, and cyclic voltammetry, indicating a successful immobilization of the polyoxomolybdate. The covalent bonding of the polyoxometalate to the graphene substrate can be deduced from the appearance of a D band in the Raman spectra and from the loss of mobility in the electrical conduction. High-resolution XPS spectra reveal an electron transfer from the graphene to the Mo complex. The comparison of charge-carrier density measurements before and after grafting supports the p-type doping effect, which is further evidenced by work function UPS measurements.
RESUMO
The preparation and characterization of a series of complexes of the Yb and Eu cations in the oxidation state II and III with the tetradentate N,O-donor tripodal ligands (tris(2-pyridylmethyl)amine (TPA), BPA(-) (HBPA=bis(2-pyridylmethyl)(2-hydroxybenzyl)amine), BPPA(-) (HBPPA=bis(2-pyridylmethyl)(3.5-di-tert-butyl-2-hydroxybenzyl)amine), and MPA(2-) (H2 MPA=(2-pyridylmethyl)bis(3.5-di-tert-butyl-2-hydroxybenzyl)amine) is reported. The X-ray crystal structures of the heteroleptic Ln(2+) complexes [Ln(TPA)I2 ] (Ln=Eu, Yb) and [Yb(BPA)I(CH3 CN)]2 , of the Ln(2+) homoleptic [Ln(TPA)2 ]I2 (Ln=Sm, Eu, Yb) and [Eu(BPA)2 ] complexes, and of the Ln(3+) [Eu(BPPA)2 ]OTf and [Yb(MPA)2 K(dme)2 ] (dme=dimethoxyethane) complexes have been determined. Cyclic voltammetry studies carried out on the bis-ligand complexes of Eu(3+) and Yb(3+) show that the metal center reduction occurs at significantly lower potentials for the BPA(-) ligand as compared with the TPA ligand. This suggests that the more electron-rich character of the BPA(-) ligand results in a higher reducing character of the lanthanide complexes of BPA(-) compared with those of TPA. The important differences in the stability and reactivity of the investigated complexes are probably due to the observed difference in redox potential. Preliminary reactivity studies show that whereas the bis-TPA complexes of Eu(2+) and Yb(2+) do not show any reactivity with heteroallenes, the [Eu(BPA)2 ] complex reduces CS2 to afford the first example of a lanthanide trithiocarbonate complex.
RESUMO
Magic-angle spinning dynamic nuclear polarization (MAS-DNP) has been proven to be a powerful technique to enhance the sensitivity of solid-state NMR (SSNMR) in a wide range of systems. Here, we show that DNP can be used to polarize lipids using a lipid-anchored polarizing agent. More specifically, we introduce a C16-functionalized biradical, which allows localization of the polarizing agents in the lipid bilayer and DNP experiments to be performed in the absence of excess cryo-protectant molecules (glycerol, dimethyl sulfoxide, etc.). This constitutes another original example of the matrix-free DNP approach that we recently introduced.
Assuntos
Radicais Livres/química , Lipossomos/química , Óxidos N-Cíclicos/química , Bicamadas Lipídicas/química , Ressonância Magnética Nuclear Biomolecular , Propanóis/químicaRESUMO
Silicon nanoparticles (NPs) serve a wide range of optical, electronic, and biological applications. Chemical grafting of various molecules to Si NPs can help to passivate their reactive surfaces, "fine-tune" their properties, or even give them further interesting features. In this work, (1) H, (13) C, and (29) Si solid-state NMR spectroscopy has been combined with density functional theory calculations to study the surface chemistry of hydride-terminated and alkyl-functionalized Si NPs. This combination of techniques yields assignments for the observed chemical shifts, including the contributions resulting from different surface planes, and highlights the presence of physisorbed water. Resonances from near-surface (13) C nuclei were shown to be substantially broadened due to surface disorder and it is demonstrated that in an ambient environment hydride-terminated Si NPs undergo fast back-bond oxidation, whereas long-chain alkyl-functionalized Si NPs undergo slow oxidation. Furthermore, the combination of NMR spectroscopy and DFT calculations showed that the employed hydrosilylation reaction involves anti-Markovnikov addition of the 1-alkene to the surface of the Si NPs.
RESUMO
Implantable devices powered by batteries have been used for sixty years. In recent devices, lithium-based batteries are the most widely used power source. However, lithium batteries have many disadvantages in terms of safety, reliability, and longevity and require regular monitoring and substitution. Implantable glucose biofuel cells (BFCs) are increasingly seen as a potential future technology for replacing lithium-based batteries because they do not require surgical replacement after 8-10 years and have a theoretically unlimited lifetime thanks to the continued recovery of glucose and oxygen present in the human body. This paper shows the fabrication of flexible implantable abiotic cathodes, based on a nitrogen/iron-doped graphene catalyst, for glucose/oxygen biofuel cell application. An ink, based on nitrogen-iron doped graphene as the abiotic catalyst and chitosan as a binder, was prepared and coated on a flexible teflonated gas diffusion layer using doctor blade coating. The characterization of the biocathode shows an open potential circuit corresponding to the potential of the abiotic catalyst and a high oxygen reduction current density of up to 66 µA cm-2 under physiological conditions. Those cathodes remain stable for up to two years with a current density loss of only 25%. The flexible abiotic electrode cytotoxicity was evaluated by cell culture experiments showing living cells' high tolerance on the biocathode surface. This work demonstrates that this abiotic catalyst can be a promising alternative for the development of implantable glucose BFCs due to its stability and its cytocompatibility.
RESUMO
Using Si as anode materials for Li-ion batteries remain challenging due to its morphological evolution and SEI modification upon cycling. The present work aims at developing a composite consisting of carbon-coated Si nanoparticles (Si@C NPs) intimately embedded in a three-dimensional (3D) graphene hydrogel (GHG) architecture to stabilize Si inside LiB electrodes. Instead of simply mixing both components, the novelty of the synthesis procedure lies in the in situ hydrothermal process, which was shown to successfully yield graphene oxide reduction, 3D graphene assembly production, and homogeneous distribution of Si@C NPs in the GHG matrix. Electrochemical characterizations in half-cells, on electrodes not containing additional conductive additive, revealed the importance of the protective C shell to achieve high specific capacity (up to 2200 mAh.g-1), along with good stability (200 cycles with an average Ceff > 99%). These performances are far superior to that of electrodes made with non-C-coated Si NPs or prepared by mixing both components. These observations highlight the synergetic effects of C shell on Si NPs, and of the single-step in situ preparation that enables the yield of a Si@C-GHG hybrid composite with physicochemical, structural, and morphological properties promoting sample conductivity and Li-ion diffusion pathways.
RESUMO
The heterodinuclear complexes [Fe(III)Mn(II)(L-Bn)(µ-OAc)(2)](ClO(4))(2) (1) and [Fe(II)Mn(II)(L-Bn)(µ-OAc)(2)](ClO(4)) (2) with the unsymmetrical dinucleating ligand HL-Bn {[2-bis[(2-pyridylmethyl)aminomethyl]]-6-[benzyl-2-(pyridylmethyl)aminomethyl]-4-methylphenol} were synthesized and characterized as biologically relevant models of the new Fe/Mn class of nonheme enzymes. Crystallographic studies have been completed on compound 1 and reveal an Fe(III)Mn(II)µ-phenoxobis(µ-carboxylato) core. A single location of the Fe(III) ion in 1 and of the Fe(II) ion in 2 was demonstrated by Mössbauer and (1)H NMR spectroscopies, respectively. An investigation of the temperature dependence of the magnetic susceptibility of 1 revealed a moderate antiferromagnetic interaction (J = 20 cm(-1)) between the high-spin Fe(III) and Mn(II) ions in 1, which was confirmed by Mössbauer and electron paramagnetic resonance (EPR) studies. The electrochemical properties of complex 1 are described. A quasireversible electron transfer at -40 mV versus Ag/AgCl corresponding to the Fe(III)Mn(II)/Fe(II)Mn(II) couple appears in the cyclic voltammogram. Thorough investigations of the Mössbauer and EPR signatures of complex 2 were performed. The analysis allowed evidencing of a weak antiferromagnetic interaction (J = 5.72 cm(-1)) within the Fe(II)Mn(II) pair consistent with that deduced from magnetic susceptibility measurements (J = 6.8 cm(-1)). Owing to the similar value of the Fe(II) zero-field splitting (D(Fe) = 3.55 cm(-1)), the usual treatment within the strong exchange limit was precluded and a full analysis of the electronic structure of the ground state of complex 2 was developed. This situation is reminiscent of that found in many diiron and iron-manganese enzyme active sites.
Assuntos
Complexos de Coordenação/química , Compostos Férricos/química , Compostos Ferrosos/química , Manganês/química , Cresóis/química , Cristalografia por Raios X , Ferro/química , Ligantes , Modelos Moleculares , Piridinas/químicaRESUMO
Magnetic properties of a doped linear polyarylamine (PA2), whose chain includes alternating para-phenylene and meta-phenylene groups, and of two cyclic and linear model compounds (C2 and D2) were explored by pulsed-EPR nutation spectroscopy, SQUID magnetometry and DFT calculations. Stoichiometrically doped PA2 samples exhibit a pure S = 1 state (exchange coupling constant J = 18 K) with a high spin concentration (0.65) corresponding to 65% of mers bearing holes. Such properties were already observed for doped reticulated polyarylamines but are quite unusual for doped linear polyarylamines. In order to better understand the properties of PA2, model compounds C2 and D2 were also investigated: pure S = 1 spin states could also be obtained, but with higher J (respectively 57 K and 35 K) and, surprisingly, with high but still limited spin concentrations (respectively 0.77 and 0.65).
RESUMO
The coupling of electron and proton transfers is currently under intense scrutiny. This Communication reports a new kind of proton-coupled electron transfer within a homodinuclear first-row transition-metal complex. The triply-bridged complex [Fe(III)(µ-OPh)(µ(2)-mpdp)Fe(II)(NH(2)Bn)] (1; mpdp(2-) = m-phenylenedipropionate) bearing a terminal aminobenzyl ligand can be reversibly deprotonated to the anilinate complex 2 whose core [Fe(II)(µ-OPh)(µ(2)-mpdp)Fe(III)(NHBn)] features an inversion of the iron valences. This observation is supported by a combination of UV-visible, (1)H NMR, and Mössbauer spectroscopic studies.
Assuntos
Compostos Férricos/química , Compostos Ferrosos/química , Cristalografia por Raios X , Elétrons , Ligantes , Modelos Moleculares , Conformação Molecular , Prótons , EstereoisomerismoRESUMO
Stable complexes of pentavalent uranyl [UO(2)(salan-(t)Bu(2))(py)K](n) (3), [UO(2)(salan-(t)Bu(2))(py)K(18C6)] (4), and [UO(2)(salophen-(t)Bu(2))(thf)]K(thf)(2)}(n) (8) have been synthesized from the reaction of the complex {[UO(2)py(5)][KI(2)py(2)]}(n) (1) with the bulky amine-phenolate ligand potassium salt K(2)(salan-(t)Bu(2)) or the Schiff base ligand potassium salt K(2)(salophen-(t)Bu(2)) in pyridine. They were characterized by NMR, IR, elemental analysis, single crystal X-ray diffraction, UV-vis spectroscopy, cyclic voltammetry, low-temperature EPR, and variable-temperature magnetic susceptibility. X-ray diffraction shows that 3 and 8 are polymeric and 4 is monomeric. Crystals of the monomeric complex [U(V)O(2)(salan-(t)Bu(2))(py)][Cp*(2)Co], 6, were also isolated from the reduction of [U(VI)O(2)(salan-(t)Bu(2))(py)], 5, with Cp*(2)Co. Addition of crown ether to 1 afforded the highly soluble pyridine stable species [UO(2)py(5)]I.py (2). The measured redox potentials E(1/2) (U(VI)/U(V)) are significantly different for 2 (-0.91 and -0.46 V) in comparison with 3, 4, 5, 7 and 9 (in the range -1.65 to -1.82 V). Temperature-dependent magnetic susceptibility data are reported for 4 and 7 and give mu(eff) of 2.20 and 2.23 mu(B) at 300 K respectively, which is compared with a mu(eff) of 2.6(1) mu(B) (300 K) for 2. Complexes 1 and 2 are EPR silent (4 K) while a rhombic EPR signal (g(x) = 1.98; g(y) = 1.25; g(z) = 0.74 (at 4 K) was measured for 4. The magnetic and the EPR data can be qualitatively analyzed with a simple crystal field model where the f electron has a nonbonding character. However, the temperature dependence of the magnetic susceptibility data suggests that one or more excited states are relatively low-lying. DFT studies show unambiguously the presence of a significant covalent contribution to the metal-ligand interaction in these complexes leading to a significant lowering of the pi(u)*. The presence of a back-bonding interaction is likely to play a role in the observed solution stability of the [UO(2)(salan-(t)Bu(2))(py)K] and [UO(2)(salophen-(t)Bu(2))(py)K] complexes with respect to disproportionation and hydrolysis.
RESUMO
Electroactive organic compounds could bring new chemical opportunities to further improve existing electrochemical energy-storage technologies as they can be prepared from less-limited resources and potentially at low environmental footprint. Among the current explored research fields, the anion-ion cell configuration appears poorly investigated although quite promising to promote the fabrication of molecular (metal-free) rechargeable batteries. Herein, we report the synthesis and the electrochemical behavior of both Mg/Li salts of 2,5-(dianilino)terephthalate (MgDAnT and Li2 DAnT) and cross-linked polyviologen (c-PV2+ ) that can reversibly uptake/extract anions at different working potentials, enabling the assembly of full anionic organic batteries. The reversible anion ingress in MgDAnT is however accompanied by solvent co-insertion from the electrolyte that provokes an overpotential effect during the first charge. Full anionic batteries pairing Li2 DAnT with c-PV2+ were assembled giving rise to 0.7â V as output voltage with a specific capacity of 50â mAh per gram of Li2 DAnT.
RESUMO
Graphene-based materials are extensively studied as promising candidates for supercapacitors (SCs) owing to the high surface area, electrical conductivity, and mechanical flexibility of graphene. Reduced graphene oxide (RGO), a close graphene-like material studied for SCs, offers limited specific capacitances (100 F·g-1) as the reduced graphene sheets partially restack through π-π interactions. This paper presents pillared graphene materials designed to minimize such graphitic restacking by cross-linking the graphene sheets with a bifunctional pillar molecule. Solid-state NMR, X-ray diffraction, and electrochemical analyses reveal that the synthesized materials possess covalently cross-linked graphene galleries that offer additional sites for ion sorption in SCs. Indeed, high specific capacitances in SCs are observed for the graphene materials synthesized with an optimized number of pillars. Specifically, the straightforward synthesis of a graphene hydrogel containing pillared structures and an interconnected porous network delivered a material with gravimetric capacitances two times greater than that of RGO (200 F·g-1 vs 107 F·g-1) and volumetric capacitances that are nearly four times larger (210 F·cm-3 vs 54 F·cm-3). Additionally, despite the presence of pillars inside the graphene galleries, the optimized materials show efficient ion transport characteristics. This work therefore brings perspectives for the next generation of high-performance SCs.
RESUMO
The presence of highly concentrated dissolved laser-polarized xenon (approximately 1mol/L, polarization up to 0.2) induces numerous effects on proton and xenon NMR spectra. We show that the proton signal enhancements due to (129)Xe-(1)H cross-relaxation (SPINOE) and overall shifts of the proton resonances due to the average dipolar shift created by the intense xenon magnetization are correlated. Protons behave as very useful sensors of the xenon magnetization. Indeed the xenon resonances exhibit many features such as superimposition of narrow lines on the main resonance due to clustering effects, or such as a polarization-dependent line broadening that is tentatively assigned to the effects of temperature fluctuations that decorrelate some distant dipolar field effects from local interactions, transforming xenon spins from "like" to "unlike" spins. These spectral features make difficult the determination of the average dipolar field by means of the xenon resonance but have interesting consequences on the heteronuclear polarization transfer experiment in Hartmann-Hahn conditions (SPIDER).
Assuntos
Espectroscopia de Ressonância Magnética , Prótons , Isótopos de Xenônio , Algoritmos , Interpretação Estatística de Dados , Campos Eletromagnéticos , Soluções , TemperaturaRESUMO
Triarylamines oxidized to radical cations can be used as stable spins sources for the design of high-spin compounds. Here, we present the synthesis of the polyarylamine-containing hexaazacyclophanes linked via meta-terphenyl bridges. Spins, created after oxidation of the polymer, can be coupled magnetically in cyclophane moieties via meta-phenyl and along the polymer chain via meta-terphenyl units. The formation of a quintet spin state was evidenced by pulsed-EPR nutation spectroscopy. Two exchange coupling constants via both couplers were determined experimentally and corresponded to J/k = 89 K in the cyclophane moiety and j/k = 17 K via meta-terphenyl. Most importantly, in this polymer, four spins can be ferromagnetically ordered via both couplers, which leads to the high spin state.