Porphyrin-based photocatalytic nanolithography: a new fabrication tool for protein arrays.

Nanoarray fabrication is a multidisciplinary endeavor encompassing materials science, chemical engineering, and biology. We formed nanoarrays via a new technique, porphyrin-based photocatalytic nanolithography. The nanoarrays, with controlled features as small as 200 nm, exhibited regularly ordered patterns and may be appropriate for (a) rapid and parallel proteomics screening of immobilized biomolecules, (b) protein-protein interactions, and/or (c) biophysical and molecular biology studies involving spatially dictated ligand placement. We demonstrated protein immobilization utilizing nanoarrays fabricated via photocatalytic nanolithography on silicon substrates where the immobilized proteins are surrounded by a non-fouling polymer background.

LAMP Diagnostics at the Point-of-Care: Emerging Trends and Perspectives for the Developer Community.

Introduction: Over the past decade, loop-mediated isothermal amplification (LAMP) technology has played an important role in molecular diagnostics. Amongst numerous nucleic acid amplification assays, LAMP stands out in terms of sample-to-answer time, sensitivity, specificity, cost, robustness, and accessibility, making it ideal for field-deployable diagnostics in resource-limited regions.Areas covered: In this review, we outline the front-end LAMP design practices for point-of-care (POC) applications, including sample handling and various signal readout methodologies. Next, we explore existing LAMP technologies that have been validated with clinical samples in the field. We summarize recent work that utilizes reverse transcription (RT) LAMP to rapidly detect SARS-CoV-2 as an alternative to standard PCR protocols. Finally, we describe challenges in translating LAMP from the benchtop to the field and opportunities for future LAMP assay development and performance reporting.Expert opinion: Despite the popularity of LAMP in the academic research community and a recent surge in interest in LAMP due to the COVID-19 pandemic, there are numerous areas for improvement in the fundamental understanding of LAMP, which are needed to elevate the field of LAMP assay development and characterization.

Chemical tethering of motile bacteria to silicon surfaces.

We chemically immobilized live, motile Escherichia coli on micrometer-scale, photocatalytically patterned silicon surfaces via amine- and carboxylic acid-based chemistries. Immobilization facilitated (i) controlled positioning; (ii) high resolution cell wall imaging via atomic force microscopy (AFM); and (iii) chemical analysis with time-of-flight-secondary ion mass spectrometry (ToF-SIMS). Spinning motion of tethered bacteria, captured with fast-acquisition video, proved microbe viability. We expect our protocols to open new experimental doors for basic and applied studies of microorganisms, from host-pathogen relationships, to microbial forensics and drug discovery, to biosensors and biofuel cell optimization.

Rhodotorula taiwanensis MD1149 produces hypoacetylated PEFA compounds with increased surface activity compared to Rhodotorula babjevae MD1169.

Biosurfactants have several desirable characteristics in the industrial sector: detergency, antimicrobial effects, skin hydration, and emulsibility. Several yeast glycolipids are currently being utilized in these capacities: sophorolipids, ustilagic acid, and mannosylerythritol lipids (MELs). An emerging class of glycolipids, termed polyol esters of fatty acids (PEFA), have recently been reported for Rhodotorula babjevae, a basidiomycetous yeast species that secretes hyperacetylated congeners of PEFA (typically with 3-6 acetylation modifications). While screening Rhodotorula species for surfactant production, we identified a new environmental isolate identified as Rhodotorula taiwanensis MD1149 that dropped the surface tension of the liquid medium, indicating that it produced a potent biosurfactant. Acid depolymerization of the purified biosurfactants, followed by gas chromatography-mass spectrometry (GC-MS) analysis revealed that the biosurfactants were composed of PEFA compounds composed mainly of mannitol and arabitol esters of 3-hydroxy fatty acid, 3-methoxy fatty acid, and fatty acids with a single double bond; chain lengths were mainly C16 and C18. Liquid chromatography-mass spectrometry (LC-MS) confirmed the predicted accurate mass of these compounds. Interestingly, PEFA compounds produced by Rhodotorula taiwanensis MD1149 were more surface active due to their hypoacetylation profile (0-4 acetylation modifications) compared to Rhodotorula babjevae MD1169. These disparate surface active properties, based on acetylation, change the hydrophilic-lipophilic balance (HLB) of these compounds, and their potential utility within industrial applications.

Prospects for Fungal Bioremediation of Acidic Radioactive Waste Sites: Characterization and Genome Sequence of Rhodotorula taiwanensis MD1149.

Highly concentrated radionuclide waste produced during the Cold War era is stored at US Department of Energy (DOE) production sites. This radioactive waste was often highly acidic and mixed with heavy metals, and has been leaking into the environment since the 1950s. Because of the danger and expense of cleanup of such radioactive sites by physicochemical processes, in situ bioremediation methods are being developed for cleanup of contaminated ground and groundwater. To date, the most developed microbial treatment proposed for high-level radioactive sites employs the radiation-resistant bacterium Deinococcus radiodurans. However, the use of Deinococcus spp. and other bacteria is limited by their sensitivity to low pH. We report the characterization of 27 diverse environmental yeasts for their resistance to ionizing radiation (chronic and acute), heavy metals, pH minima, temperature maxima and optima, and their ability to form biofilms. Remarkably, many yeasts are extremely resistant to ionizing radiation and heavy metals. They also excrete carboxylic acids and are exceptionally tolerant to low pH. A special focus is placed on Rhodotorula taiwanensis MD1149, which was the most resistant to acid and gamma radiation. MD1149 is capable of growing under 66 Gy/h at pH 2.3 and in the presence of high concentrations of mercury and chromium compounds, and forming biofilms under high-level chronic radiation and low pH. We present the whole genome sequence and annotation of R. taiwanensis strain MD1149, with a comparison to other Rhodotorula species. This survey elevates yeasts to the frontier of biology's most radiation-resistant representatives, presenting a strong rationale for a role of fungi in bioremediation of acidic radioactive waste sites.

Are chromosomal instabilities induced by exposure of cultured normal human cells to low- or high-LET radiation?

Radiation-induced genomic instability has been proposed as a very early, if not an initiating, step in radiation carcinogenesis. Numerous studies have established the occurrence of radiation-induced chromosomal instability in various cells of both human and rodent origin. In many of these studies, however, the cells were not "normal" initially, and in many cases they involved tumor-derived cell lines. The phenomenon clearly would be of even greater interest if it were shown to occur generally in cells that are normal at the outset, rather than cells that may have been "selected" because of a pre-existing susceptibility to induced instability. As a test of the generality of the phenomenon, we studied low-passage normal diploid human fibroblasts (AG1521A) to determine whether they are susceptible to the induction of chromosomal instability in the progeny of surviving cells after exposure in G(0) to low- and high-LET radiation. Cytogenetic assays for instability were performed on both mixed populations of cells and clones of cells surviving exposure. We found no evidence for the induction of such instability as a result of radiation exposure, though we observed a senescence-related chromosomal instability in the progeny of both irradiated and unirradiated cell populations.

Detection of Bacillus anthracis from spores and cells by loop-mediated isothermal amplification without sample preparation.

Loop-mediated isothermal amplification (LAMP) is a technique capable of rapidly amplifying specific nucleic acid sequences without specialized thermal cycling equipment. In addition, several detection methods that include dye fluorescence, gel electrophoresis, turbidity and colorimetric change, can be used to measure or otherwise detect target amplification. To date, publications have described the requirement for some form of sample nucleic acid extraction (boiling, lysis, DNA purification, etc.) prior to initiating a LAMP reaction. We demonstrate here, the first LAMP positive results obtained from vegetative cells and spores of Bacillus anthracis without nucleic acid extraction. Our data show that the simple addition of cells or spores to the reaction mixture, followed by heating at 63°C is all that is required to reproducibly amplify and detect target plasmid and chromosomal DNA via colorimetric change. The use of three primer sets targeting both plasmids and the chromosome of B. anthracis allows for the rapid discrimination of non-pathogenic bacteria from pathogenic bacteria within 30 min of sampling. Our results indicate that direct testing of B. anthracis spores and cells via LAMP assay will greatly simplify and shorten the detection process by eliminating nucleic acid purification. These results may allow more rapid detection of DNA from pathogenic organisms present in field and environmental samples.

Development and initial results of a low cost, disposable, point-of-care testing device for pathogen detection.

Development of small footprint, disposable, fast, and inexpensive devices for pathogen detection in the field and clinic would benefit human and veterinary medicine by allowing evidence-based responses to future out breaks. We designed and tested an integrated nucleic acid extraction and amplification device employing a loop-mediated isothermal amplification (LAMP) or reverse transcriptase-LAMP assay. Our system provides a screening tool with polymerase-chain-reaction-level sensitivity and specificity for outbreak detection, response, and recovery. Time to result is ∼90 min. The device utilizes a swab that collects sample and then transfers it to a disc of cellulose-based nucleic acid binding paper. The disc is positioned within a disposable containment tube with a manual loading port. In order to test for the presence of target pathogens, LAMP reagents are loaded through the tube's port into contact with the sample containing cellulose disc. The reagents then are isothermally heated to 63°C for ∼1 h to achieve sequence-specific target nucleic acid amplification. Due to the presence of a colorimetric dye, amplification induces visible color change in the reagents from purple to blue. As initial demonstrations, we detected methicillin resistant Staphylococcus aureus genomic DNA, as well as recombinant and live foot-and-mouth disease virus.

Phototocatalytic lithography of poly(propylene sulfide) block copolymers: toward high-throughput nanolithography for biomolecular arraying applications.

Photocatalytic lithography (PCL) is an inexpensive, fast, and robust method of oxidizing surface chemical moieties to produce patterned substrates. This technique has utility in basic biological research as well as various biochip applications. We report on porphyrin-based PCL for patterning poly(propylene sulfide) block copolymer films on gold substrates on the micrometer and submicrometer scales. We confirm chemical patterning with imaging ToF-SIMS and low-voltage SEM. Biomolecular patterning on micrometer and submicrometer scales is demonstrated with proteins, protein-linked beads. and fluorescently labeled proteins.

Porphyrin-based photocatalytic lithography.

Photocatalytic lithography couples light with photoreactive coated mask materials to pattern surface chemistry. We excite porphyrins to create radical species that photocatalytically oxidize, and thereby pattern, chemistries in the local vicinity. The technique advantageously is suited for use with a wide variety of substrates. It is fast and robust, and the wavelength of light does not limit the resolution of patterned features. We have patterned proteins and cells to demonstrate the utility of photocatalytic lithography in life science applications.

Polymerase chain reaction-based suppression of repetitive sequences in whole chromosome painting probes for FISH.

We have developed a method to suppress the PCR amplification of repetitive sequences in whole chromosome painting probes by adding Cot-1 DNA to the amplification mixture. The repetitive sequences in the Cot-1 DNA bind to their homologous sequences in the probe library, prevent the binding of primers, and interfere with extension of the probe sequences, greatly decreasing PCR efficiency selectively across these blocked regions. A second labelling reaction is then done and this product is resuspended in FISH hybridization mixture without further addition of blocking DNA. The hybridization produces little if any non-specific binding on any other chromosomes. We have been able to successfully use this procedure with both human and rat chromosome probes. This technique should be applicable in producing probes for CGH, M-FISH and SKY, as well as reducing the presence of repetitive DNA in genomic libraries.