Tip-Induced and Electrical Control of the Photoluminescence Yield of Monolayer WS2.

The photoluminescence (PL) of monolayer tungsten disulfide (WS2) is locally and electrically controlled using the nonplasmonic tip and tunneling current of a scanning tunneling microscope (STM). The spatial and spectral distribution of the emitted light is determined using an optical microscope. When the STM tip is engaged, short-range PL quenching due to near-field electromagnetic effects is present, independent of the sign and value of the bias voltage applied to the tip-sample tunneling junction. In addition, a bias-voltage-dependent long-range PL quenching is measured when the sample is positively biased. We explain these observations by considering the native n-doping of monolayer WS2 and the charge carrier density gradients induced by electron tunneling in micrometer-scale areas around the tip position. The combination of wide-field PL microscopy and charge carrier injection using an STM opens up new ways to explore the interplay between excitons and charge carriers in two-dimensional semiconductors.

Electron beam analysis induces Cl vacancy defects in a NaCl thin film.

This work reports on the electron-induced modification of NaCl thin film grown on Ag(110). We show using low energy electron diffraction that electron beam bombardment leads to desorption and formation of Cl vacancy defects on NaCl surface. The topographic structure of these defects is studied using scanning tunneling microscopy (STM) showing the Cl defects as depressions on the NaCl surface. Most of the observed defects are mono-atomic vacancies and are located on flat NaCl terraces. Auger electron spectroscopy confirms the effect of electron exposure on NaCl thin films showing Cl atoms desorption from the surface. Using density functional theory taken into account the van der Waals dispersion interactions, we confirm the observed experimental STM measurements with STM simulation. Furthermore, comparing the adsorption of defect free NaCl and defective NaCl monolayer on Ag(110) surfaces, we found an increase of the adhesion energy and the charge transfer between the NaCl film and the substrate due to the Cl vacancy. In details, the adhesion energy increases between the NaCl film and the metallic Ag substrate from 30.4 meV Å-2for the NaCl film without Cl vacancy and from 39.5 meV Å-2for NaCl film with a single Cl vacancy. The charge transfer from the NaCl film to the Ag substrate is enhanced when the vacancy is created, from 0.63e-to 1.25e-.

Blue phosphorene reactivity on the Au(111) surface.

The synthesis of blue phosphorene by molecular beam epitaxy (MBE) has recently come under the spotlight due to its potential applications in electronic and optoelectronic devices. However, this synthesis remains a significant challenge. The surface reactivity between the P atoms and the Au atoms should be considered for the P/Au(111) system. In the MBE process, the temperature of the substrate is a key parameter for the growth of blue phosphorene. During the initial growth stage, irregularly shaped Phosphorus clusters grow on top of Au(111) surface at room temperature. When the substrate temperature is increased, these clusters transform into a phosphorene-like structure with a honeycomb lattice. An atom exchange reaction is observed between the P and first layer Au atoms under thermal activation at higher temperature, where the P atoms replace Au atoms to form a blue phosphorene structure within the top Au layer and at the step edges.

An electrically induced probe of the modes of a plasmonic multilayer stack.

A new single-image acquisition technique for the determination of the dispersion relation of the propagating modes of a plasmonic multilayer stack is introduced. This technique is based on an electrically-driven, spectrally broad excitation source which is nanoscale in size: the inelastic electron tunnel current between the tip of a scanning tunneling microscope (STM) and the sample. The resulting light from the excited modes of the system is collected in transmission using a microscope objective. The energy-momentum dispersion relation of the excited optical modes is then determined from the angle-resolved optical spectrum of the collected light. Experimental and theoretical results are obtained for metal-insulator-metal (MIM) stacks consisting of a silicon oxide layer (70, 190 or 310 nm thick) between two gold films (each with a thickness of 30 nm). The broadband characterization of hybrid plasmonic-photonic transverse magnetic (TM) modes involved in an avoided crossing is demonstrated and the advantages of this new technique over optical reflectivity measurements are evaluated.

Scanning Tunneling Microscope-Induced Excitonic Luminescence of a Two-Dimensional Semiconductor.

The long sought-after goal of locally and spectroscopically probing the excitons of two-dimensional (2D) semiconductors is attained using a scanning tunneling microscope (STM). Excitonic luminescence from monolayer molybdenum diselenide (MoSe_{2}) on a transparent conducting substrate is electrically excited in the tunnel junction of an STM under ambient conditions. By comparing the results with photoluminescence measurements, the emission mechanism is identified as the radiative recombination of bright A excitons. STM-induced luminescence is observed at bias voltages as low as those that correspond to the energy of the optical band gap of MoSe_{2}. The proposed excitation mechanism is resonance energy transfer from the tunneling current to the excitons in the semiconductor, i.e., through virtual photon coupling. Additional mechanisms (e.g., charge injection) may come into play at bias voltages that are higher than the electronic band gap. Photon emission quantum efficiencies of up to 10^{-7} photons per electron are obtained, despite the lack of any participating plasmons. Our results demonstrate a new technique for investigating the excitonic and optoelectronic properties of 2D semiconductors and their heterostructures at the nanometer scale.

Epitaxial Synthesis of Blue Phosphorene.

Phosphorene is a new 2D material composed of a single or few atomic layers of black phosphorus. Phosphorene has both an intrinsic tunable direct bandgap and high carrier mobility values, which make it suitable for a large variety of optical and electronic devices. However, the synthesis of single-layer phosphorene is a major challenge. The standard procedure to obtain phosphorene is by exfoliation. More recently, the epitaxial growth of single-layer phosphorene on Au(111) was investigated by molecular beam epitaxy and the obtained structure described as a blue phosphorene sheet. In the present study, large areas of high-quality monolayer phosphorene, with a bandgap value equal to at least 0.8 eV, are synthesized on Au(111). The experimental investigations, coupled with density functional theory calculations, give evidence of two distinct phases of blue phosphorene on Au(111), instead of one as previously reported, and their atomic structures are determined.

Sub-molecular spectroscopy and temporary molecular charging of Ni-phthalocyanine on graphene with STM.

In this study, the self-assembled molecular network and electronic properties of Ni-phthalocyanine (NiPc) molecules on monolayer graphene (MLG)/6H-SiC(0001) were studied by room temperature Scanning Tunnelling Microscopy (STM) and Density Functional Theory (DFT) calculations. In this study, a very weak electronic coupling between the graphene and the NiPc molecules is found. This is due to the very small charge transfer of only 0.035e- per molecule. The weak molecule-graphene interaction has two observable consequences: sub-molecular resolution was obtained in the STM spectroscopy at room-temperature with the molecules adsorbed directly on the graphene, and the occupied and unoccupied molecular resonance peaks were observed to shift their position in energy as a function of the tip-surface distance. This is due to the temporary local charging (either positive or negative) that is achieved by decreasing the surface voltage under the STM tip. This may have important consequences for future studies of the opto-electronic properties of such hybrid graphene-molecule systems.

Surface plasmon polariton beams from an electrically excited plasmonic crystal.

Surface plasmon polariton (SPP) beams with an in-plane angular spread of 8° are produced by electrically exciting a 2D plasmonic crystal using a scanning tunneling microscope (STM). The plasmonic crystal consists of a gold nanoparticle (NP) array on a thin gold film on a glass substrate and it is the inelastic tunnel electrons (IET) from the STM that provide a localized and spectrally broadband SPP source. Surface waves on the gold film are shown to be essential for the coupling of the local, electrical excitation to the extended NP array, thus leading to the creation of SPP beams. A simple model of the scattering of SPPs by the array is used to explain the origin and direction of the generated SPP beams under certain conditions. In order to take into account the broadband spectrum of the source, calculations realized using finite-difference time-domain (FDTD) methods are obtained, showing that bandgaps for SPP propagation exist for certain wavelengths and indicating how changing the pitch of the NP array may enhance the SPP beaming effect.

Molecular Dissociation on the SiC(0001) 3×3 Surface.

In the framework of density functional theory, the adsorption of the halogenated polycyclic aromatic hydrocarbon 2,11-diiodohexabenzocoronene (HBC-I2 ) on the SiC(0001) 3×3 surface has been investigated. Nondissociative and dissociative molecular adsorption is considered, and simulated scanning tunneling microscopy (STM) images are compared with the corresponding experimental observations. Calculations show that dissociative adsorption is favorable and reveal the crucial importance of the extended flat carbon core on molecule-surface interactions in dissociative adsorption; the iodine atom-surface interaction is of minor importance. Indeed, removing iodine atoms does not significantly affect the STM images of the central part of the molecule. This study shows that the dissociation of large halogenated polycyclic aromatic hydrocarbon molecules can occur on the SiC surface. This opens up interesting perspectives in the chemical reactivity and functionalization of wide band gap semiconductors.

Temporal coherence of propagating surface plasmons.

The temporal coherence of propagating surface plasmons is investigated using a local, broadband plasmon source consisting of a scanning tunneling microscope. A variant of Young's experiment is performed using a sample consisting of a 200-nm-thick gold film perforated by two 1-µm-diameter holes (separated by 4 or 6 µm). The resulting interference fringes are studied as a function of hole separation and source bandwidth. From these experiments, we conclude that apart from plasmon decay in the metal, there is no further loss of plasmon coherence from propagation, scattering at holes, or other dephasing processes. As a result, the plasmon coherence time may be estimated from its spectral bandwidth.

Formation of unconventional standing waves at graphene edges by valley mixing and pseudospin rotation.

We investigate the roles of the pseudospin and the valley degeneracy in electron scattering at graphene edges. It is found that they are strongly correlated with charge density modulations of short-wavelength oscillations and slowly decaying beat patterns in the electronic density profile. Theoretical analyses using nearest-neighbor tight-binding methods and first-principles density-functional theory calculations agree well with our experimental data from scanning tunneling microscopy. The armchair edge shows almost perfect intervalley scattering with pseudospin invariance regardless of the presence of the hydrogen atom at the edge, whereas the zigzag edge only allows for intravalley scattering with the change in the pseudospin orientation. The effect of structural defects at the graphene edges is also discussed.

An electrically excited nanoscale light source with active angular control of the emitted light.

We report on the angular distribution, polarization, and spectrum of the light emitted from an electrically controlled nanoscale light source. This nanosource of light arises from the local, low-energy, electrical excitation of localized surface plasmons (LSP) on individual gold nanoparticles using a scanning tunneling microscope (STM). The gold nanoparticles (NP) are chemically synthesized truncated bitetrahedrons. The emitted light is collected through the transparent substrate and the emission characteristics (angular distribution, polarization, and spectrum) are analyzed. These three observables are found to strongly depend on the lateral position of the STM tip with respect to the triangular upper face of the gold NP. In particular, the resulting light emission changes orientation when the electrical excitation via the STM tip is moved from the base to the vertex of the triangular face. On the basis of the comparison of the experimental observations with an analytical dipole model and finite-difference time-domain (FDTD) calculations, we show that this behavior is linked to the selective excitation of the out-of-plane and in-plane dipolar LSP modes of the NP. This selective excitation is achieved through the lateral position of the tip with respect to the symmetry center of the NP.

Edge scattering of surface plasmons excited by scanning tunneling microscopy.

The scattering of electrically excited surface plasmon polaritons (SPPs) into photons at the edges of gold metal stripes is investigated. The SPPs are locally generated by the inelastic tunneling current of a scanning tunneling microscope (STM). The majority of the collected light arising from the scattering of SPPs at the stripe edges is emitted in the forward direction and is collected at large angle (close to the air-glass critical angle, θ(c)). A much weaker isotropic component of the scattered light gives rise to an interference pattern in the Fourier plane images, demonstrating that plasmons may be scattered coherently. An analysis of the interference pattern as a function of excitation position on the stripe is used to determine a value of 1.42 ± 0.18 for the relative plasmon wave vector (kSPP/k0) of the corresponding SPPs. From these results, we interpret the directional, large angle (θ~θ(c)) scattering to be mainly from plasmons on the air-gold interface, and the diffuse scattering forming interference fringes to be dominantly from plasmons on the gold-substrate interface.

Quantum interference channeling at graphene edges.

Electron scattering at graphene edges is expected to make a crucial contribution to the electron transport in graphene nanodevices by producing quantum interferences. Atomic-scale scanning tunneling microscopy (STM) topographies of different edge structures of monolayer graphene show that the localization of the electronic density of states along the C-C bonds, a property unique to monolayer graphene, results in quantum interference patterns along the graphene carbon bond network, whose shapes depend only on the edge structure and not on the electron energy.

Flat epitaxial quasi-1D phosphorene chains.

The emergence of peculiar phenomena in 1D phosphorene chains (P chains) has been proposed in theoretical studies, notably the Stark and Seebeck effects, room temperature magnetism, and topological phase transitions. Attempts so far to fabricate P chains, using the top-down approach starting from a few layers of bulk black phosphorus, have failed to produce reliably precise control of P chains. We show that molecular beam epitaxy gives a controllable bottom-up approach to grow atomically thin, crystalline 1D flat P chains on a Ag(111) substrate. Scanning tunneling microscopy, angle-resolved photoemission spectroscopy, and density functional theory calculations reveal that the armchair-shaped chains are semiconducting with an intrinsic 1.80 ± 0.20 eV band gap. This could make these P chains an ideal material for opto-electronic devices.

Tip-induced oxidation of silicene nano-ribbons.

We report on the oxidation of self-assembled silicene nanoribbons grown on the Ag (110) surface using scanning tunneling microscopy and high-resolution photoemission spectroscopy. The results show that silicene nanoribbons present a strong resistance towards oxidation using molecular oxygen. This can be overcome by increasing the electric field in the STM tunnel junction above a threshold of +2.6 V to induce oxygen dissociation and reaction. The higher reactivity of the silicene nanoribbons towards atomic oxygen is observed as expected. The HR-PES confirm these observations: even at high exposures of molecular oxygen, the Si 2p core-level peaks corresponding to pristine silicene remain dominant, reflecting a very low reactivity to molecular oxygen. Complete oxidation is obtained following exposure to high doses of atomic oxygen; the Si 2p core level peak corresponding to pristine silicene disappears.

SiC(0001) 3 x 3 heterochirality revealed by single-molecule STM imaging.

We report a description of the SiC(0001) 3 x 3 silicon carbide reconstruction based on single-molecule scanning tunneling microscopy (STM) observations and density functional theory calculations. We show that the SiC(0001) 3 x 3 reconstruction can be described as contiguous domains of right and left chirality distributed at the nanoscale, which breaks the to date supposed translational invariance of the surface. While this surface heterochirality remains invisible in STM topographies of clean surfaces, individual metal-free phthalocyanine molecules chemisorbed on the surface act as molecular lenses to reveal the surface chirality in the STM topographies. This original method exemplifies the ability of STM to probe atomic-scale structures in detail and provides a more complete vision of a frequently studied SiC reconstruction.

Surface-isomerization dynamics of trans-stilbene molecules adsorbed on Si(100)-2 x 1.

Photoinduced trans-cis isomerization studies of stilbene molecules in the gas phase have led to a precise understanding of the corresponding molecular dynamics. Yet, when such molecules are adsorbed on surfaces, these reactions are expected to be strongly modified as compared to what is know in the gas phase. In this work, a low temperature (5 K) scanning tunneling microscope (STM) is used to image the trans-stilbene molecules deposited on a Si(100)-2 x 1 surface at 12 K. trans-Stilbene undergoes conformational changes during the adsorption process such that four different stilbene conformers are observed: trans-stilbene (TS), cis-stilbene (CS), and two new conformers I(1) and I(2). Furthermore, electronic excitation of individual stilbene molecules, by means of tunnel electrons, is shown to activate specific reversible molecular surface isomerization (TS <--> I(1) and CS <--> I(2)) combined with diffusion across the surface. Calculated STM topographies, using the tight binding method, indicate that the CS and TS molecules are physisorbed. The molecular conformations of the surface isomers I(1) and I(2) are suggested to be analogous to transient states conformations of the stilbene molecule when stabilized by the silicon surface. The measurements of the molecular surface isomerization and diffusion reaction yields are used to build a qualitative potential energy surface of the various stilbene reactions. The molecular surface-isomerization dynamics is shown to be influenced by the type of dopant (n or p). This is related to surface charging, which reveals modifications in the stilbene ionization potential.

Selective scanning tunnelling microscope electron-induced reactions of single biphenyl molecules on a Si(100) surface.

Selective electron-induced reactions of individual biphenyl molecules adsorbed in their weakly chemisorbed configuration on a Si(100) surface are investigated by using the tip of a low-temperature (5 K) scanning tunnelling microscope (STM) as an atomic size source of electrons. Selected types of molecular reactions are produced, depending on the polarity of the surface voltage during STM excitation. At negative surface voltages, the biphenyl molecule diffuses across the surface in its weakly chemisorbed configuration. At positive surface voltages, different types of molecular reactions are activated, which involve the change of adsorption configuration from the weakly chemisorbed to the strongly chemisorbed bistable and quadristable configurations. Calculated reaction pathways of the molecular reactions on the silicon surface, using the nudge elastic band method, provide evidence that the observed selectivity as a function of the surface voltage polarity cannot be ascribed to different activation energies. These results, together with the measured threshold surface voltages and the calculated molecular electronic structures via density functional theory, suggest that the electron-induced molecular reactions are driven by selective electron detachment (oxidation) or attachment (reduction) processes.

Directional light beams by design from electrically driven elliptical slit antennas.

We report on the low-energy, electrical generation of light beams in specific directions from planar elliptical microstructures. The emission direction of the beam is determined by the microstructure eccentricity. A very simple, broadband, optical antenna design is used, which consists of a single elliptical slit etched into a gold film. The light beam source is driven by an electrical nanosource of surface plasmon polaritons (SPP) that is located at one focus of the ellipse. In this study, SPPs are generated through inelastic electron tunneling between a gold surface and the tip of a scanning tunneling microscope.