Tibial strains are sensitive to speed perturbations, but not grade perturbations, during running.

A fatigue-failure process is hypothesized to govern the development of tibial stress fractures, where bone damage is highly dependent on the peak strain magnitude. To date, much of the work examining tibial strain during running has ignored uphill and downhill running despite the prevalence of this terrain. This study examined the sensitivity of tibial strain to changes in running grade and speed using a combined musculoskeletal-finite element modelling routine. Seventeen participants ran on a treadmill at ±10, ±5 and 0 deg; at each grade, participants ran at 3.33 m s-1 and at a grade-adjusted speed of 2.50 and 4.17 m s-1 for uphill and downhill grades, respectively. Force and motion data were recorded in each grade and speed combination. Muscle and joint contact forces were estimated using inverse-dynamics-based static optimization. These forces were applied to a participant-adjusted finite element model of the tibia. None of the strain variables (50th and 95th percentile strain and strained volume ≥4000 µÎµ) differed as a function of running grade; however, all strain variables were sensitive to running speed (F1≥9.59, P≤0.03). In particular, a 1 m s-1 increase in speed resulted in a 9% (∼260 µÎµ) and 155% (∼600 mm3) increase in peak strain and strained volume, respectively. Overall, these findings suggest that faster running speeds, but not changes in running grade, may be more deleterious to the tibia.

Fixed and Relative Positioning of Scans for High Resolution Peripheral Quantitative Computed Tomography.

INTRODUCTION: High resolution peripheral quantitative computed tomography (HR-pQCT) imaging protocol requires defining where to position the ∼1 cm thick scan along the bone length. Discrepancies between the use of two positioning methods, the relative and fixed offset, may be problematic in the comparison between studies and participants. This study investigated how bone landmarks scale linearly with length and how this scaling affects both positioning methods aimed at providing a consistent anatomical location for scan acquisition. METHODS: Using CT images of the radius (N = 25) and tibia (N = 42), 10 anatomical landmarks were selected along the bone length. The location of these landmarks was converted to a percent length along the bone, and the variation in their location was evaluated across the dataset. The absolute location of the HR-pQCT scan position using both offset methods was identified for all bones and converted to a percent length position relative to the HR-pQCT reference line for comparison. A secondary analysis of the location of the scan region specifically within the metaphysis was explored at the tibia. RESULTS: The location of landmarks deviated from a linear relationship across the dataset, with a range of 3.6 % at the radius sites, and 4.5 % at the tibia sites. The consequent variation of the position of the scan at the radius was 0.6 % and 0.3 %, and at the tibia 2.4 % and 0.5 %, for the fixed and relative offset, respectively. The position of the metaphyseal junction with the epiphysis relative to the scan position was poorly correlated to bone length, with R2 = 0.06 and 0.37, for the fixed and relative offset respectively. CONCLUSION: The variation of the scan position by either method is negated by the intrinsic variation of the bone anatomy with respect both to total bone length as well as the metaphyseal region. Therefore, there is no clear benefit of either offset method. However, the lack of difference due to the inherent variation in the underlying anatomy implies that it is reasonable to compare studies even if they are using different positioning methods.

Predicting Tibia-Fibula Geometry and Density From Anatomical Landmarks Via Statistical Appearance Model: Influence of Errors on Finite Element-Calculated Bone Strain.

State-of-the-art participant-specific finite element models require advanced medical imaging to quantify bone geometry and density distribution; access to and cost of imaging is prohibitive to the use of this approach. Statistical appearance models may enable estimation of participants' geometry and density in the absence of medical imaging. The purpose of this study was to: (1) quantify errors associated with predicting tibia-fibula geometry and density distribution from skin-mounted landmarks using a statistical appearance model and (2) quantify how those errors propagate to finite element-calculated bone strain. Participant-informed models of the tibia and fibula were generated for thirty participants from height and sex and from twelve skin-mounted landmarks using a statistical appearance model. Participant-specific running loads, calculated using gait data and a musculoskeletal model, were applied to participant-informed and CT-based models to predict bone strain using the finite element method. Participant-informed meshes illustrated median geometry and density distribution errors of 4.39-5.17 mm and 0.116-0.142 g/cm3, respectively, resulting in large errors in strain distribution (median RMSE = 476-492 µÎµ), peak strain (limits of agreement =±27-34%), and strained volume (limits of agreement =±104-202%). These findings indicate that neither skin-mounted landmark nor height and sex-based predictions could adequately approximate CT-derived participant-specific geometry, density distribution, or finite element-predicted bone strain and therefore should not be used for analyses comparing between groups or individuals.

Dirt Track Surface Preparation and Associated Differences in Speed, Stride Length, and Stride Frequency in Galloping Horses.

In racehorses, the risk of musculoskeletal injury is linked to a decrease in speed and stride length (SL) over consecutive races prior to injury. Surface characteristics influence stride parameters. We hypothesized that large changes in stride parameters are found during galloping in response to dirt racetrack preparation. Harrowing of the back stretch of a half-mile dirt racetrack was altered in three individual lanes with decreasing depth from the inside to the outside. Track underlay compaction and water content were changed between days. Twelve horses (six on day 2) were sequentially galloped at a target speed of 16 ms-1 across the three lanes. Speed, stride frequency (SF), and SL were quantified with a GPS/GNSS logger. Mixed linear models with speed as covariate analyzed SF and SL, with track hardness and moisture content as fixed factors (p < 0.05). At the average speed of 16.48 ms-1, hardness (both p < 0.001) and moisture content (both p < 0.001) had significant effects on SF and SL. The largest difference in SL of 0.186 m between hardness and moisture conditions exceeded the 0.10 m longitudinal decrease over consecutive race starts previously identified as injury predictor. This suggests that detailed measurements of track conditions might be useful for refining injury prediction models.

Adapting the Intensity Gradient for Use with Count-Based Accelerometry Data in Children and Adolescents.

The intensity gradient is a new cutpoint-free metric that was developed to quantify physical activity (PA) measured using accelerometers. This metric was developed for use with the ENMO (Euclidean norm minus one) metric, derived from raw acceleration data, and has not been validated for use with count-based accelerometer data. In this study, we determined whether the intensity gradient could be reproduced using count-based accelerometer data. Twenty participants (aged 7-22 years) wore a GT1M, an ActiGraph (count-based), and a GT9X, ActiGraph (raw accelerations) accelerometer during both in-lab and at-home protocols. We found strong agreement between GT1M and GT9X counts during the combined in-lab activities (mean bias = 2 counts) and between minutes per day with different intensities of activity (e.g., sedentary, light, moderate, and vigorous) classified using cutpoints (mean bias < 5 min/d at all intensities). We generated bin sizes that could be used to generate IGs from the count data (mean bias = -0.15; 95% LOA [-0.65, 0.34]) compared with the original IG. Therefore, the intensity gradient could be used to analyze count data. The count-based intensity gradient metric will be valuable for re-analyzing historical datasets collected using older accelerometer models, such as the GT1M.

Zoledronic acid after spinal cord injury mitigates losses in proximal femoral strength independent of ambulation ability.

Rapid bone loss can occur after spinal cord injury (SCI) and a standard of care to prevent or treat this phenomenon is an active area of research. Using advanced analysis techniques, this study demonstrates that zoledronic acid, a possible treatment, prevented loss of bone strength at the hip following SCI. INTRODUCTION: Bone loss below the level of neurological lesion is a well-known complication of spinal cord injury (SCI), and effective preventive treatment for this phenomenon is an active area of research. Zoledronic acid has demonstrated efficacy to attenuate bone loss at the hip after SCI, but previous studies relied on measurements from dual-energy X-ray absorptiometry. The purpose of this investigation was to more thoroughly characterize changes to bone mineral and strength at the proximal femur in individuals receiving zoledronic acid in the acute SCI stage; we also examined the influence of ambulatory ability on bone outcomes. METHODS: Participants randomized to either zoledronic acid (n = 29) or placebo (n = 30) received computed tomography (CT) scans and ambulatory assessments at baseline and 6 and 12 months following drug infusion. CT-based finite element (FE) modeling was used to predict changes in proximal femoral strength associated with treatment. RESULTS: After 12 months, FE-predicted bone strength was reduced by a mean (SD) of 9.6 (17.9)% in the zoledronic acid group versus 24.6 (24.5)% in the placebo group (p = 0.007). These differences in strength were explained by reductions in CT measurements of both trabecular (p < 0.001) and cortical (p ≤ 0.021) bone at the femoral neck and trochanteric region. Ambulation ability influenced select trabecular and cortical parameters, but we were unable to detect an impact on FE-predicted bone strength. CONCLUSION: These findings demonstrate that treatment with zoledronic acid in acute SCI attenuates losses in proximal femoral strength, which may reduce the risk of hip fractures across patients with varying degrees of ambulatory abilities.

Bone Mineral Loss at the Distal Femur and Proximal Tibia Following Spinal Cord Injury in Men and Women.

PURPOSE: Spinal cord injury (SCI) causes rapid bone loss and increases risk of fragility fractures in the lower extremities. The majority of individuals with SCI are men, and few studies have investigated sex as a biological variable in SCI-induced osteoporosis. This cross-sectional study aimed to quantify sex-specific differences in bone mineral following SCI. METHODS: Quantitative computed tomography (QCT) scans of the distal femur and proximal tibia were obtained at baseline of one of four clinical trials enrolling people who sustained SCI 1 month to 50 years prior to recruitment. Bone volume (BV), bone mineral content (BMC), bone mineral density (BMD), and bending strength index (BSI) were quantified in the integral, trabecular, and cortical bone in the epiphysis, metaphysis and diaphysis. Scans from 106 men and 31 women were analyzed to measure sex-specific effects on bone loss over time post-SCI. RESULTS: BMC and BSI declined exponentially as a function of time post-SCI and were best described by separate decay curves for men and women. Women had BV, BMC, and BSI at 58-77% that of men in the acute and plateau phases, with both sexes showing similar rates of loss as a function of time post-SCI. Trabecular BMD was best described as an exponential decay versus time post-SCI, with no sex-specific differences. CONCLUSIONS: Due to consistently lower BV, BMC, and BSI, women may be more susceptible to fractures after SCI than men.

Tibial Strains During Prolonged Downhill Running: A Finite Element Analysis.

Bone strains in the lower extremity may be influenced by neuromuscular fatigue. In this study, we examined potential changes in finite element (FE) predicted tibial strains over the course of a fatiguing downhill-running protocol. Twelve physically active males ran for 30 min on an instrumented treadmill at a speed of 2.8 m s-1 and a grade of -11.3 deg. Motion capture and inverse-dynamic-based static optimization were used to estimate lower-extremity joint contact and muscle forces at the beginning, middle, and end stages of the downhill run. Finite element models of the tibia-fibula complex, from database-matched computed tomography images, were then used to estimate resulting 90th percentile strain (peak strain) and strained volume (volume of elements above 3000 µÎµ). In the fatigued state, peak ankle joint contact forces decreased an average of 8.1% (p < 0.002) in the axial direction, but increased an average of 7.7% (p < 0.042) in the anterior-posterior direction; consequently, finite element estimations of peak strain and strained volume were unaffected (p > 0.190). Although neuromuscular fatigue may influence ankle joint contact forces, it may not necessarily influence tibial strains due to the complex, and sometimes nonintuitive, relationship between applied load and resulting bone strain.

Effect of stride length on the running biomechanics of healthy women of different statures.

BACKGROUND: Tibial stress fracture is a debilitating musculoskeletal injury that diminishes the physical performance of individuals who engage in high-volume running, including Service members during basic combat training (BCT) and recreational athletes. While several studies have shown that reducing stride length decreases musculoskeletal loads and the potential risk of tibial injury, we do not know whether stride-length reduction affects individuals of varying stature differently. METHODS: We investigated the effects of reducing the running stride length on the biomechanics of the lower extremity of young, healthy women of different statures. Using individualized musculoskeletal and finite-element models of women of short (N = 6), medium (N = 7), and tall (N = 7) statures, we computed the joint kinematics and kinetics at the lower extremity and tibial strain for each participant as they ran on a treadmill at 3.0 m/s with their preferred stride length and with a stride length reduced by 10%. Using a probabilistic model, we estimated the stress-fracture risk for running regimens representative of U.S. Army Soldiers during BCT and recreational athletes training for a marathon. RESULTS: When study participants reduced their stride length by 10%, the joint kinetics, kinematics, tibial strain, and stress-fracture risk were not significantly different among the three stature groups. Compared to the preferred stride length, a 10% reduction in stride length significantly decreased peak hip (p = 0.002) and knee (p < 0.001) flexion angles during the stance phase. In addition, it significantly decreased the peak hip adduction (p = 0.013), hip internal rotation (p = 0.004), knee extension (p = 0.012), and ankle plantar flexion (p = 0.026) moments, as well as the hip, knee, and ankle joint reaction forces (p < 0.001) and tibial strain (p < 0.001). Finally, for the simulated regimens, reducing the stride length decreased the relative risk of stress fracture by as much as 96%. CONCLUSIONS: Our results show that reducing stride length by 10% decreases musculoskeletal loads, tibial strain, and stress-fracture risk, regardless of stature. We also observed large between-subject variability, which supports the development of individualized training strategies to decrease the incidence of stress fracture.

Is Running Power a Useful Metric? Quantifying Training Intensity and Aerobic Fitness Using Stryd Running Power Near the Maximal Lactate Steady State.

We sought to determine the utility of Stryd, a commercially available inertial measurement unit, to quantify running intensity and aerobic fitness. Fifteen (eight male, seven female) runners (age = 30.2 [4.3] years; V·O2max = 54.5 [6.5] ml·kg-1·min-1) performed moderate- and heavy-intensity step transitions, an incremental exercise test, and constant-speed running trials to establish the maximal lactate steady state (MLSS). Stryd running power stability, sensitivity, and reliability were evaluated near the MLSS. Stryd running power was also compared to running speed, V·O2, and metabolic power measures to estimate running mechanical efficiency (EFF) and to determine the efficacy of using Stryd to delineate exercise intensities, quantify aerobic fitness, and estimate running economy (RE). Stryd running power was strongly associated with V·O2 (R2 = 0.84; p < 0.001) and running speed at the MLSS (R2 = 0.91; p < 0.001). Stryd running power measures were strongly correlated with RE at the MLSS when combined with metabolic data (R2 = 0.79; p < 0.001) but not in isolation from the metabolic data (R2 = 0.08; p = 0.313). Measures of running EFF near the MLSS were not different across intensities (~21%; p > 0.05). In conclusion, although Stryd could not quantify RE in isolation, it provided a stable, sensitive, and reliable metric that can estimate aerobic fitness, delineate exercise intensities, and approximate the metabolic requirements of running near the MLSS.

Internal Tibial Forces and Moments During Graded Running.

The stress experienced by the tibia has contributions from the forces and moments acting on the tibia. We sought to quantify the influence of running grade on internal tibial forces and moments. Seventeen participants ran at 3.33 m/s on an instrumented treadmill at 0 deg, ±5 deg, and ±10 deg while motion data were captured. Ankle joint contact force was estimated from an anthropometrically-scaled musculoskeletal model using inverse dynamics-based static optimization. Internal tibial forces and moments were quantified at the distal 1/3rd of the tibia, by ensuring static equilibrium with all applied forces and moments. Downhill running conditions resulted in lower peak internal axial force (range of mean differences: -9% to -16%, p < 0.001), lower peak internal anteroposterior force (-14% to -21%, p < 0.001), and lower peak internal mediolateral force (-14% to -15%, p < 0.001), compared to 0 deg and +5 deg. Furthermore, downhill conditions resulted in lower peak internal mediolateral moment (-11%to -21%, p < 0.001), lower peak internal anteroposterior moment (-13% to -14%, p < 0.001), and lower peak internal torsional moment (-9% to -21%, p < 0.001), compared to 0 deg, +5 deg, and +10 deg. The +10 deg condition resulted in lower peak internal axial force (-7% to -9%, p < 0.001) and lower peak internal mediolateral force (-9%, p = 0.004), compared to 0 deg and +5 deg. These findings suggest that downhill running may be associated with lower tibial stresses than either level or uphill running.

Preventing Bone Stress Injuries in Runners with Optimal Workload.

Bone stress injuries (BSIs) occur at inopportune times to invariably interrupt training. All BSIs in runners occur due to an "error" in workload wherein the interaction between the number and magnitude of bone tissue loading cycles exceeds the ability of the tissue to resist the repetitive loads. There is not a single optimal bone workload, rather a range which is influenced by the prevailing scenario. In prepubertal athletes, optimal bone workload consists of low-repetitions of fast, high-magnitude, multidirectional loads introduced a few times per day to induce bone adaptation. Premature sports specialization should be avoided so as to develop a robust skeleton that is structurally optimized to withstand multidirectional loading. In the mature skeleton, optimal workload enables gains in running performance but minimizes bone damage accumulation by sensibly progressing training, particularly training intensity. When indicated (e.g., following repeated BSIs), attempts to reduce bone loading magnitude should be considered, such as increasing running cadence. Determining the optimal bone workload for an individual athlete to prevent and manage BSIs requires consistent monitoring. In the future, it may be possible to clinically determine bone loads at the tissue level to facilitate workload progressions and prescriptions.

Bringing Mechanical Context to Image-Based Measurements of Bone Integrity.

PURPOSE OF REVIEW: Image-based measurements of bone integrity are used to estimate failure properties and clinical fracture risk. This paper (1) reviews recent imaging studies that have enhanced our understanding of the mechanical pathways to bone fracture and (2) discusses the influence that inter-individual differences in image-based measurements may have on the clinical assessment of fracture risk RECENT FINDINGS: Increased tissue mineralization is associated with improved bone strength but reduced fracture toughness. Trabecular architecture that is important for fatigue resistance is less important for bone strength. The influence of porosity on bone failure properties is heavily dependent on pore location and size. The interaction of various characteristics, such as bone area and mineral content, can further complicate their influence on bone failure properties. What is beneficial for bone strength is not always beneficial for bone toughness or fatigue resistance. Additionally, given the large amount of imaging data that is clinically available, there is a need to develop effective translational strategies to better interpret non-invasive measurements of bone integrity.

Validation of Bone Density and Microarchitecture Measurements of the Load-Bearing Femur in the Human Knee Obtained Using In Vivo HR-pQCT Protocol.

High resolution peripheral quantitative computed tomography (HR-pQCT) was designed to study bone mineral density (BMD) and microarchitecture in peripheral sites at the distal radius and tibia. With the introduction of the second generation HR-pQCT scanner (XtremeCT II, Scanco Medical) that has a larger, longer gantry it is now possible to study the human knee in vivo using HR-pQCT. Previous validation of HR-pQCT measurements at the distal radius and tibia against micro-CT is not representative of the knee because the increased cross-sectional area, greater amount of soft tissue surrounding the scan region, and different imaging protocol result in potentially increased beam hardening effects and photon scatter and different signal-to-noise ratio. The objective of this study is to determine the accuracy of density and microarchitecture measurements in the human knee measured by HR-pQCT using an in vivo protocol. Twelve fresh-frozen cadaver knees were imaged using in vivo HR-pQCT (60.7 µm) protocol. Subsequentially, distal femurs were extracted and imaged using a higher resolution (30.3 µm) ex vivo protocol, replicating micro-CT imaging. Scans were registered so that agreement of density and bone microarchitecture measurements could be determined using linear regression and Bland-Altman plots. All density and microarchitecture outcomes were highly correlated between the 2 protocols (R2 > 0.89) albeit with statistically significant differences between absolute measures based on paired t tests. All parameters showed accuracy between 4.5% and 8.7%, and errors were highly systematic, particularly for trabecular BMD and trabecular thickness (R2 > 0.93). We found that BMD and microarchitecture measurements in the distal femur obtained using an in vivo HR-pQCT knee protocol contained systematic errors, and accurately represented measurements obtained using a micro-CT equivalent imaging protocol. This work establishes the validity and limitations of using HR-pQCT to study the BMD and microarchitecture of human knees in future clinical studies.

Effects of body size and load carriage on lower-extremity biomechanical responses in healthy women.

BACKGROUND: Musculoskeletal injuries, such as stress fractures, are the single most important medical impediment to military readiness in the U.S. Army. While multiple studies have established race- and sex-based risks associated with a stress fracture, the role of certain physical characteristics, such as body size, on stress-fracture risk is less conclusive. METHODS: In this study, we investigated the effects of body size and load carriage on lower-extremity joint mechanics, tibial strain, and tibial stress-fracture risk in women. Using individualized musculoskeletal-finite-element-models of 21 women of short, medium, and tall statures (n = 7 in each group), we computed the joint mechanics and tibial strains while running on a treadmill at 3.0 m/s without and with a load of 11.3 or 22.7 kg. We also estimated the stress-fracture risk using a probabilistic model of bone damage, repair, and adaptation. RESULTS: Under all load conditions, the peak plantarflexion moment for tall women was higher than those in short women (p < 0.05). However, regardless of the load condition, we did not observe differences in the strains and the stress-fracture risk between the stature groups. When compared to the no-load condition, a 22.7-kg load increased the peak hip extension and flexion moments for all stature groups (p < 0.05). However, when compared to the no-load condition, the 22.7-kg load increased the strains and the stress-fracture risk in short and medium women (p < 0.05), but not in tall women. CONCLUSION: These results show that women of different statures adjust their gait mechanisms differently when running with external load. This study can educate the development of new strategies to help reduce the risk of musculoskeletal injuries in women while running with external load.

The Role of Lower-Limb Geometry in the Pathophysiology of Atypical Femoral Fracture.

PURPOSEOF REVIEW: The etiology of atypical femoral fracture (AFF) is likely multifactorial. In this review, we examined the recent literature investigating the role of lower-limb geometry in the pathophysiology of AFF. RECENT FINDINGS: Increased femoral bowing was associated with prevalent AFF and a greater likelihood of a diaphyseal versus a subtrochanteric AFF location. Femoral neck geometry or hip alignment may also be related to AFF, but findings remain equivocal. Differences in femoral geometry may, in part, be responsible for the high rate of AFF in Asian compared with Caucasian populations. Finally, simulation studies suggest that lower-limb geometry influences AFF risk via its effects on mechanical strain of the lateral femoral cortex. Femoral geometry, and bowing in particular, is related to prevalent AFF, but more prospective investigation is needed to determine whether measurements of geometry can be used for clinical risk stratification.

The Influence of Reconstruction Kernel on Bone Mineral and Strength Estimates Using Quantitative Computed Tomography and Finite Element Analysis.

Quantitative computed tomography has been posed as an alternative imaging modality to investigate osteoporosis. We examined the influence of computed tomography convolution back-projection reconstruction kernels on the analysis of bone quantity and estimated mechanical properties in the proximal femur. Eighteen computed tomography scans of the proximal femur were reconstructed using both a standard smoothing reconstruction kernel and a bone-sharpening reconstruction kernel. Following phantom-based density calibration, we calculated typical bone quantity outcomes of integral volumetric bone mineral density, bone volume, and bone mineral content. Additionally, we performed finite element analysis in a standard sideways fall on the hip loading configuration. Significant differences for all outcome measures, except integral bone volume, were observed between the 2 reconstruction kernels. Volumetric bone mineral density measured using images reconstructed by the standard kernel was significantly lower (6.7%, p < 0.001) when compared with images reconstructed using the bone-sharpening kernel. Furthermore, the whole-bone stiffness and the failure load measured in images reconstructed by the standard kernel were significantly lower (16.5%, p < 0.001, and 18.2%, p < 0.001, respectively) when compared with the image reconstructed by the bone-sharpening kernel. These data suggest that for future quantitative computed tomography studies, a standardized reconstruction kernel will maximize reproducibility, independent of the use of a quantitative calibration phantom.

Trabecular Bone Score at the Distal Femur and Proximal Tibia in Individuals With Spinal Cord Injury.

Rapid declines in bone mineral density (BMD) at the knee after spinal cord injury (SCI) are associated with an increased risk of fracture. Evaluation of bone quality using the trabecular bone score (TBS) may provide a complimentary measure to BMD assessment to examine bone health and fracture risk after SCI. The purpose of this study was to assess bone mineral density (BMD) and trabecular bone score (TBS) at the knee in individuals with and without SCI. Nine individuals with complete SCI (mean time since SCI 2.9 ± 3.8 yr) and 9 non-SCI controls received dual-energy X-ray absorptiometry scans of the right knee using the lumbar spine protocol. BMD and TBS were quantified at epiphyseal, metaphyseal, diaphyseal, and total bone regions of the distal femur and proximal tibia. Individuals with SCI illustrated significantly lower total BMD at the distal femur (23%; p = 0.029) and proximal tibia (19%; p = 0.02) when compared with non-SCI controls. Despite these marked differences in BMD from both locations, significant differences in total TBS were observed at the distal femur only (6%; p = 0.023). The observed differences in total BMD and TBS could be attributed to reductions in epiphyseal rather than metaphyseal or diaphysis measurements. The relationship between TBS and duration of SCI was well explained by a logarithmic trend at the distal femoral epiphysis (r2 = 0.54, p = 0.025). The logarithmic trend would predict that after 3 yr of SCI, TBS would be approximately 6% lower than the non-SCI controls. Further evaluation is needed to determine if TBS measures at the knee provide important information about bone quality that is not captured by traditional BMD.

Open-label clinical trial of alendronate after teriparatide therapy in people with spinal cord injury and low bone mineral density.

STUDY DESIGN: Non-randomized open-label clinical trial of oral alendronate after teriparatide therapy in people with spinal cord injury (SCI) and low bone mineral density (BMD). OBJECTIVES: To determine if alendronate would prevent bone loss after discontinuation of teriparatide. SETTING: Outpatient research clinic at Northwestern University Feinberg School of Medicine. METHODS: Seventeen participants with chronic SCI who recently completed 12-24 months of teriparatide treatment received oral alendronate 70 mg once weekly for 12 months. Participants were evaluated at baseline, 6 months and 12 months. Bone was assessed by: DXA at the spine and hip, CT at the distal femur/proximal tibia, serum collected for bone markers, and bone strength determined by finite element (FE) analysis of the proximal tibia. RESULTS: Areal BMD showed no significant change from baseline at the total hip or femoral neck, where mean change (SD) was 1.3% (4.7) and 0.54% (5.0), respectively. However, areal BMD increased significantly at the spine by 2.5% (4.6). CT demonstrated significant increases in bone mineral content at the femoral epiphysis, metaphysis, and diaphysis, 15% (18), 7.7% (12), and 3.0% (3.5), respectively. Measurements at the tibia illustrated improvements and reductions, but no changes to FE-predicted strength were observed. Biomarkers illustrated inhibition of bone formation and resorption, with P1NP and CTX decreasing by 52% (82) and 62% (74), respectively. CONCLUSION: Twelve months of alendronate after discontinuation of teriparatide in people with SCI can prevent bone loss and may increase bone mass and preserve bone strength at the spine, hip, and some sites of the knee.

New Considerations for Wearable Technology Data: Changes in Running Biomechanics During a Marathon.

The purpose of this study was to use wearable technology data to quantify alterations in subject-specific running patterns throughout a marathon race and to determine if runners could be clustered into subgroups based on similar trends in running gait alterations throughout the marathon. Using a wearable sensor, data were collected for cadence, braking, bounce, pelvic rotation, pelvic drop, and ground contact time for 27 runners. A composite index was calculated based on the "typical" data (4-14 km) for each runner and evaluated for 14 individual 2-km sections thereafter to detect "atypical" data (ie, higher indices). A cluster analysis assigned all runners to a subgroup based on similar trends in running alterations. Results indicated that the indices became significantly higher starting at 20 to 22 km. Cluster 1 exhibited lower indices than cluster 2 throughout the marathon, and the only significant difference in characteristics between clusters was that cluster 1 had a lower age-grade performance score than cluster 2. In summary, this study presented a novel method to investigate the effects of fatigue on running biomechanics using wearable technology in a real-world setting. Recreational runners with higher age-grade performance scores had less atypical running patterns throughout the marathon compared with runners with lower age-grade performance scores.