Surface-layer lattices as patterning element for multimeric extremozymes.

A promising new approach for the production of biocatalysts comprises the use of surface-layer (S-layer) lattices that present functional multimeric enzymes on their surface, thereby guaranteeing most accurate spatial distribution and orientation, as well as maximal effectiveness and stability of these enzymes. For proof of concept, a tetrameric and a trimeric extremozyme are chosen for the construction of S-layer/extremozyme fusion proteins. By using a flexible peptide linker, either one monomer of the tetrameric xylose isomerase XylA from the thermophilic Thermoanaerobacterium strain JW/SL-YS 489 or, in another approach, one monomer of the trimeric carbonic anhydrase from the methanogenic archaeon Methanosarcina thermophila are genetically linked to one monomer of the S-layer protein SbpA of Lysinibacillus sphaericus CCM 2177. After isolation and purification, the self-assembly properties of both S-layer fusion proteins as well as the specific activity of the fused enzymes are confirmed, thus indicating that the S-layer protein moiety does not influence the nature of the multimeric enzymes and vice versa. By recrystallization of the S-layer/extremozyme fusion proteins on solid supports, the active enzyme multimers are exposed on the surface of the square S-layer lattice with 13.1 nm spacing.

Identification of a novel gene cluster in the upstream region of the S-layer gene sbpA involved in cell wall metabolism of Lysinibacillus sphaericus CCM 2177 and characterization of the recombinantly produced autolysin and pyruvyl transferase.

The S-layer protein SbpA of Lysinibacillus sphaericus CCM 2177 assembles into a square (p4) lattice structure and recognizes a pyruvylated secondary cell wall polymer (SCWP) as the proper anchoring structure to the rigid cell wall layer. Sequencing of 8,004 bp in the 5'-upstream region of the S-layer gene sbpA led to five ORFs-encoding proteins involved in cell wall metabolism. After cloning and heterologous expression of ORF1 and ORF5 in Escherichia coli, the recombinant autolysin rAbpA and the recombinant pyruvyl transferase rCsaB were isolated, purified, and correct folding was confirmed by circular dichroism. Although rAbpA encoded by ORF1 showed amidase activity, it could attack whole cells of Ly. sphaericus CCM 2177 only after complete extraction of the S-layer lattice. Despite the presence of three S-layer-homology motifs on the N-terminal part, rAbpA did not show detectable affinity to peptidoglycan-containing sacculi, nor to isolated SCWP. As the molecular mass of the autolysin lies above the molecular exclusion limit of the S-layer, AbpA is obviously trapped within the rigid cell wall layer by the isoporous protein lattice. Immunogold-labeling of ultrathin-sectioned whole cells of Ly. sphaericus CCM 2177 with a polyclonal rabbit antiserum raised against rCsaB encoded by ORF5, and cell fractionation experiments demonstrated that the pyruvyl transferase was located in the cytoplasm, but not associated with cell envelope components including the plasma membrane. In enzymatic assays, rCsaB clearly showed pyruvyl transferase activity. By using RT-PCR, specific transcripts for each ORF could be detected. Cotranscription could be confirmed for ORF2 and ORF3.

Crystallization of domains involved in self-assembly of the S-layer protein SbsC.

The Gram-positive bacterium Geobacillus stearothermophilus ATCC 12980 is completely covered with a two-dimensional crystalline monolayer composed of the S-layer protein SbsC. In order to complete the structure of the full-length protein, additional soluble constructs containing the crucial domains for self-assembly have been successfully cloned, expressed and purified. Crystals obtained from three different recombinant constructs yielded diffraction to 3.4, 2.8 and 1.5 Šresolution. Native data have been collected.

The high-molecular-mass amylase (HMMA) of Geobacillus stearothermophilus ATCC 12980 interacts with the cell wall components by virtue of three specific binding regions.

The complete nucleotide sequence encoding the high-molecular-mass amylase (HMMA) of Geobacillus stearothermophilus ATCC 12980 was established by PCR techniques. Based on the hmma gene sequence, the full-length rHMMA, four N- or C-terminal rHMMA truncations as well as three C-terminal rHMMA fragments were cloned and heterologously expressed in Escherichia coli. Purified rHMMA forms were used either for affinity studies with the recombinant (r) S-layer protein SbsC (rSbsC), peptidoglycan-containing sacculi (PGS) and pure peptidoglycan (PG) devoid of the secondary cell wall polymer (SCWP), or for surface plasmon resonance (SPR) studies using rSbsC and isolated SCWP. In the C-terminal part of the HMMA, three specific binding regions, one for each cell wall component (rSbsC, SCWP and PG), could be identified. The functionality of the PG-binding domain could be confirmed by replacing the main part of the SCWP-binding domain of an S-layer protein by the PG-binding domain of the HMMA. The present work describes a completely new and highly economic strategy for cell adhesion of an exoenzyme.

The structure and binding behavior of the bacterial cell surface layer protein SbsC.

Surface layers (S-layers) comprise the outermost cell envelope component of most archaea and many bacteria. Here we present the structure of the bacterial S-layer protein SbsC from Geobacillus stearothermophilus, showing a very elongated and flexible molecule, with strong and specific binding to the secondary cell wall polymer (SCWP). The crystal structure of rSbsC((31-844)) revealed a novel fold, consisting of six separate domains, which are connected by short flexible linkers. The N-terminal domain exhibits positively charged residues regularly spaced along the putative ligand binding site matching the distance of the negative charges on the extended SCWP. Upon SCWP binding, a considerable stabilization of the N-terminal domain occurs. These findings provide insight into the processes of S-layer attachment to the underlying cell wall and self-assembly, and also accommodate the observed mechanical strength, the polarity of the S-layer, and the pronounced requirement for surface flexibility inherent to cell growth and division.

Towards the structure of the C-terminal part of the S-layer protein SbsC.

The S-layer protein SbsC from Geobacillus stearothermophilus ATCC 12980 is the most prevalent single protein produced by the bacterium and covers the complete bacterial surface in the form of a two-dimensional crystalline monolayer. In order to elucidate the structural features of the assembly domains, several N-terminally truncated fragments of SbsC have been crystallized. Crystals obtained from recombinant fragments showed anisotropic diffraction to a maximum of 3.5 A resolution using synchrotron radiation. The best diffracting crystals were obtained from rSbsC(755-1099), an unintentional in situ proteolytic degradation product of rSbsC(447-1099). Crystals were obtained in two different space groups, P2(1) and P4(1)2(1)2, and diffracted to 2.6 and 3 A resolution, respectively. Native and heavy-atom derivative data have been collected. The structure of the C-terminal part will yield atomic resolution information for the domains that are crucial for the assembly of the two-dimensional lattice.

S-Layers as a basic building block in a molecular construction kit.

Crystalline arrays of protein or glycoprotein subunits forming surface layers (S-layers) are the most common outermost envelope components of prokaryotic organisms (archaea and bacteria). The wealth of information on the structure, chemistry, genetics, morphogenesis, and function of S-layers has revealed a broad application potential. As S-layers are periodic structures, they exhibit identical physicochemical properties for each molecular unit down to the subnanometer level and possess pores of identical size and morphology. Many applications of S-layers in nanobiotechnology depend on the ability of isolated subunits to recrystallize into monomolecular lattices in suspension or on suitable surfaces and interfaces. S-Layer lattices can be exploited as scaffolding and patterning elements for generating more complex supramolecular assemblies and structures, as required for life and nonlife science applications.

S-layers as a tool kit for nanobiotechnological applications.

Crystalline bacterial cell surface layers (S-layers) have been identified in a great number of different species of bacteria and represent an almost universal feature of archaea. Isolated native S-layer proteins and S-layer fusion proteins incorporating functional sequences self-assemble into monomolecular crystalline arrays in suspension, on a great variety of solid substrates and on various lipid structures including planar membranes and liposomes. S-layers have proven to be particularly suited as building blocks and patterning elements in a biomolecular construction kit involving all major classes of biological molecules (proteins, lipids, glycans, nucleic acids and combinations of them) enabling innovative approaches for the controlled 'bottom-up' assembly of functional supramolecular structures and devices. Here, we review the basic principles of S-layer proteins and the application potential of S-layers in nanobiotechnology and biomimetics including life and nonlife sciences.

Heterotetramers formed by an S-layer-streptavidin fusion protein and core-streptavidin as a nanoarrayed template for biochip development.

Based on the S-layer protein SbpA of Bacillus sphaericus CCM 2177, an S-layer-streptavidin fusion protein was constructed. After heterologous expression, isolation of the fusion protein, and refolding, functional heterotetramers were obtained that had retained the ability to recrystallize into the square-lattice structure on plain gold chips and on gold chips precoated with secondary cell wall polymer (SCWP), which is the natural anchoring molecule for the S-layer protein in the bacterial cell wall. Monolayers generated by recrystallization of heterotetramers on plain gold chips or on gold chips precoated with thiolated SCWP were exploited for the binding of biotinylated oligonucleotides (30-mers). Hybridization experiments with complementary fluorescently labeled oligonucleotides carrying one mismatch or no mismatch (both 15-mers) were performed and evaluated with surface-plasmon-field-enhanced fluorescence spectroscopy. For surfaces generated by the recrystallization of heterotetramers on SCWP-coated gold chips, a detection limit of 1.57 pM could be determined, whereas for surfaces obtained by direct recrystallization of heterotetramers on plain gold chips, a detection limit of 8.2 pM was found. Measuring the association and dissociation processes of oligonucleotides carrying no mismatch led to a dissociation constant of K(D)=6.3 x 10(-10) m, whereas for oligonucleotides carrying one mismatch a dissociation constant of K(D)=7.9 x 10(-9) m was determined. This finding was confirmed by measuring the whole Langmuir isotherm, which resulted in a dissociation constant of K(D)=2.6 x 10(-8) m.

A functional chimaeric S-layer-enhanced green fluorescent protein to follow the uptake of S-layer-coated liposomes into eukaryotic cells.

The chimaeric gene encoding a C-terminally truncated form of the S-layer protein SbpA of Bacillus sphaericus CCM 2177 and the EGFP (enhanced green fluorescent protein) was ligated into plasmid pET28a and cloned and expressed in Escherichia coli. Just 1 h after induction of expression an intense EGFP fluorescence was detected in the cytoplasm of the host cells. Expression at 28 degrees C instead of 37 degrees C resulted in clearly increased fluorescence intensity, indicating that the folding process of the EGFP moiety was temperature sensitive. To maintain the EGFP fluorescence, isolation of the fusion protein from the host cells had to be performed in the presence of reducing agents. SDS/PAGE analysis, immunoblotting and N-terminal sequencing of the isolated and purified fusion protein confirmed the presence of both the S-layer protein and the EGFP moiety. The fusion protein had maintained the ability to self-assemble in suspension and to recrystallize on peptidoglycan-containing sacculi or on positively charged liposomes, as well as to fluoresce. Comparison of fluorescence excitation and emission spectra of recombinant EGFP and rSbpA(31-1068)/EGFP revealed identical maxima at 488 and 507 nm respectively. The uptake of liposomes coated with a fluorescent monomolecular protein lattice of rSbpA(31-1068)/EGFP into HeLa cells was studied by confocal laser-scanning microscopy. The major part of the liposomes was internalized within 2 h of incubation and entered the HeLa cells by endocytosis.

S-layer fusion proteins--construction principles and applications.

Crystalline bacterial cell surface layers (S-layers) are the outermost cell envelope component of many bacteria and archaea. S-layers are monomolecular arrays composed of a single protein or glycoprotein species and represent the simplest biological membrane developed during evolution. The wealth of information available on the structure, chemistry, genetics and assembly of S-layers revealed a broad spectrum of applications in nanobiotechnology and biomimetics. By genetic engineering techniques, specific functional domains can be incorporated in S-layer proteins while maintaining the self-assembly capability. These techniques have led to new types of affinity structures, microcarriers, enzyme membranes, diagnostic devices, biosensors, vaccines, as well as targeting, delivery and encapsulation systems.

Multitechnique study on a recombinantly produced Bacillus halodurans laccase and an S-layer/laccase fusion protein.

Methods for organizing functional materials at the nanometer scale are essential for the development of novel fabrication techniques. One of the most relevant areas of research in nanobiotechnology concerns technological utilization of self-assembly systems, wherein molecules spontaneously associate into reproducible supramolecular structures. For this purpose, the laccase of Bacillus halodurans C-125 was immobilized on the S-layer lattice formed by SbpA of Lysinibacillus sphaericus CCM 2177 either by (i) covalent linkage of the enzyme to the natural protein self-assembly system or (ii) by construction of a fusion protein comprising the S-layer protein and the laccase. The laccase and the S-layer fusion protein were produced heterologously in Escherichia coli. After isolation and purification, the properties of the proteins, as well as the specific activity of the enzyme moiety, were investigated. Interestingly, the S-layer part confers a much higher solubility on the laccase as observed for the sole enzyme. Comparative spectrophotometric measurements of the enzyme activity revealed similar but significantly higher values for rLac and rSbpA/Lac in solution compared to the immobilized state. However, rLac covalently linked to the SbpA monolayer yielded a four to five time higher enzymatic activity than rSbpA/Lac immobilized on a solid support. Combined quartz crystal microbalance with dissipation monitoring (QCM-D) and electrochemical measurements (performed in an electrochemical QCM-D cell) revealed that rLac immobilized on the SbpA lattice had an approximately twofold higher enzymatic activity compared to that obtained with the fusion protein.

Nanobiotechnology with S-layer proteins as building blocks.

One of the key challenges in nanobiotechnology is the utilization of self- assembly systems, wherein molecules spontaneously associate into reproducible aggregates and supramolecular structures. In this contribution, we describe the basic principles of crystalline bacterial surface layers (S-layers) and their use as patterning elements. The broad application potential of S-layers in nanobiotechnology is based on the specific intrinsic features of the monomolecular arrays composed of identical protein or glycoprotein subunits. Most important, physicochemical properties and functional groups on the protein lattice are arranged in well-defined positions and orientations. Many applications of S-layers depend on the capability of isolated subunits to recrystallize into monomolecular arrays in suspension or on suitable surfaces (e.g., polymers, metals, silicon wafers) or interfaces (e.g., lipid films, liposomes, emulsomes). S-layers also represent a unique structural basis and patterning element for generating more complex supramolecular structures involving all major classes of biological molecules (e.g., proteins, lipids, glycans, nucleic acids, or combinations of these). Thus, S-layers fulfill key requirements as building blocks for the production of new supramolecular materials and nanoscale devices as required in molecular nanotechnology, nanobiotechnology, biomimetics, and synthetic biology.

High-affinity interaction between the S-layer protein SbsC and the secondary cell wall polymer of Geobacillus stearothermophilus ATCC 12980 determined by surface plasmon resonance technology.

Surface plasmon resonance studies using C-terminal truncation forms of the S-layer protein SbsC (recombinant SbsC consisting of amino acids 31 to 270 [rSbsC(31-270)] and rSbsC(31-443)) and the secondary cell wall polymer (SCWP) isolated from Geobacillus stearothermophilus ATCC 12980 confirmed the exclusive responsibility of the N-terminal region comprising amino acids 31 to 270 for SCWP binding. Quantitative analyses indicated binding behavior demonstrating low, medium, and high affinities.

A novel approach to specific allergy treatment: the recombinant allergen-S-layer fusion protein rSbsC-Bet v 1 matures dendritic cells that prime Th0/Th1 and IL-10-producing regulatory T cells.

An ideal vaccine for allergen-specific immunotherapy of type I allergies should display reduced mediator-releasing capacity, induce maturation of APC, and modify the disease-eliciting Th2-dominated allergen-specific response to a more physiological response. We have previously shown that rSbsC-Bet v 1, the recombinant fusion protein of a bacterial surface (S-layer) protein of Geobacillus stearothermophilus ATCC 12980 and the major birch pollen allergen Bet v 1, exhibited reduced allergenicity and induced IFN-gamma and IL-10 synthesis in Bet v 1-specific Th2 clones. In this study, we characterized the effects of rSbsC-Bet v 1 on immature monocyte-derived dendritic cells (mdDC) and the consequences for the polarization of naive CD4(+) T lymphocytes isolated from the blood of birch pollen-allergic patients. mdDC responded to rSbsC-Bet v 1 with a significant up-regulation of costimulatory molecules, functional maturation, and the synthesis of IL-10 and IL-12. mdDC matured with rSbsC-Bet v 1 induced the differentiation of naive T cells into IFN-gamma-producing cells. This effect was IL-12 dependent. In parallel, a substantial number of naive T cells developed into IL-10-producing CD25(+)Foxp3(+)CLTA-4(+) cells capable of active suppression. Thus, rSbsC-Bet v 1 showed immune stimulatory capacity on DC, which then promoted the simultaneous differentiation of Th0/Th1 cells and regulatory T cells. These data further support that the concept of conjugating allergens to bacterial agents is a promising approach to improve vaccines for specific immunotherapy of atopic allergies.

The three S-layer-like homology motifs of the S-layer protein SbpA of Bacillus sphaericus CCM 2177 are not sufficient for binding to the pyruvylated secondary cell wall polymer.

The S-layer protein SbpA of Bacillus sphaericus CCM 2177 recognizes a pyruvylated secondary cell wall polymer (SCWP) as anchoring structure to the peptidoglycan-containing layer. Data analysis from surface plasmon resonance (SPR) spectroscopy revealed the existence of three different binding sites with high, medium and low affinity for rSbpA on SCWP immobilized to the sensor chip. The shortest C-terminal truncation with specific affinity to SCWP was rSbpA(31-318). Surprisingly, rSbpA(31-202) comprising the three S-layer-like homology (SLH) motifs did not bind at all. Analysis of the SbpA sequence revealed a 58-amino-acid-long SLH-like motif starting 11 amino acids after the third SLH motif. The importance of this motif for reconstituting the functional SCWP-binding domain was further demonstrated by construction of a chimaeric protein consisting of the SLH domain of SbsB, the S-layer protein of Geobacillus stearothermophilus PV72/p2 and the C-terminal part of SbpA. In contrast to SbsB or its SLH domain which did not recognize SCWP of B. sphaericus CCM 2177 as binding site, the chimaeric protein showed specific affinity. Deletion of 213 C-terminal amino acids of SbpA had no impact on the square (p4) lattice structure, whereas deletion of 350 amino acids was linked to a change in lattice type from square to oblique (p1).

ISBst12, a novel type of insertion-sequence element causing loss of S-layer-gene expression in Bacillus stearothermophilus ATCC 12980.

The cell surface of the surface layer (S-layer)-carrying strain of Bacillus stearothermophilus ATCC 12980 is completely covered with an oblique lattice composed of the S-layer protein SbsC. In the S-layer-deficient strain, theS-layer gene sbsC was still present but was interrupted by a novel type of insertion sequence (IS) element designated ISBst12. The insertion site was found to be located within the coding region of the sbsC gene, 199 bp downstream from the translation start of SbsC. ISBst12 is 1612 bp long, bounded by 16 bp imperfect inverted repeats and flanked by a directly repeated 8 bp target sequence. ISBst12 contains an ORF of 1446 bp and is predicted to encode a putative transposase of 482 aa with a calculated theoretical molecular mass of 55562 Da and an isoelectric point of 9.13. The putative transposase does not exhibit a typical DDE motif but displays aHis-Arg-Tyr triad characteristic of the active site of integrases from the bacteriophage lambda Int family. Furthermore, two overlapping leucine-zipper motifs were identified at the N-terminal part of the putative transposase. As revealed by Southern blotting, ISBst12 was present in multiple copies in the S-layer-deficient strain as well as in the S-layer-carrying strain. Northern blotting indicated that S-layer gene expression is already inhibited at the transcriptional level, since no sbsC-specific transcript could be identified in the S-layer-deficient strain. By using PCR, ISBst12 was also detected in B. stearothermophilus PV72/p6, in its oxygen-induced strain variant PV72/p2 and in the S-layer-deficient strain PV72/T5.

S-layer gene sbsC of Bacillus stearothermophilus ATCC 12980: molecular characterization and heterologous expression in Escherichia coli.

The cell surface of Bacillus stearothermophilus ATCC 12980 is completely covered with an oblique S-layer lattice. To investigate sequence identities and a common structure-function relationship in S-layer proteins of different B. stearothermophilus wild-type strains, the nucleotide sequence encoding the S-layer protein SbsC of B. stearothermophilus ATCC 12980 was determined by PCR techniques. The entire sbsC sequence showed an ORF of 3297 bp predicted to encode a protein of 1099 aa with a theoretical molecular mass of 115409 Da and an isoelectric point of 5.73. Primer extension analysis suggested the existence of two promoter regions. Amino acid sequence comparison between SbsC and SbsA, a previously characterized S-layer protein of B. stearothermophilus PV72/p6 which assembles into a hexagonally ordered lattice, revealed an identical secretion signal peptide, 85% identity for the N-terminal regions (aa 31-270) which do not carry any S-layer homologous motifs, but only 21% identity for the rest of the sequences. Affinity studies demonstrated that the N-terminal part of SbsC is necessary for recognition of a secondary cell wall polymer. This was in accordance with results obtained in a previous study for SbsA, thus confirming a common functional principle for the N-terminal parts of both S-layer proteins. The sbsC coding region cloned into the pET3a vector without its own upstream region, the signal sequence and the 3' transcriptional terminator led to stable expression in Escherichia coli.

Crystallization and preliminary structure determination of the C-terminal truncated domain of the S-layer protein SbsC.

The C-terminal truncated form of the S-layer protein SbsC from Geobacillus stearothermophilus, rSbsC(31-844), has been crystallized by the vapour-diffusion method using polyethylene glycol 6000 as a precipitating agent. The crystals diffract to 3 A resolution using synchrotron radiation and belong to space group P2(1), with unit-cell parameters a = 57.24, b = 98.91, c = 108.62 A, beta = 94.34 degrees. One molecule is present in the asymmetric unit, which corresponds to a solvent content of 65%. Native and heavy-atom derivative data have been collected. The Pt derivative yielded two high-occupancy sites per molecule.

Molecular characterization of the S-layer gene, sbpA, of Bacillus sphaericus CCM 2177 and production of a functional S-layer fusion protein with the ability to recrystallize in a defined orientation while presenting the fused allergen.

The nucleotide sequence encoding the crystalline bacterial cell surface (S-layer) protein SbpA of Bacillus sphaericus CCM 2177 was determined by a PCR-based technique using four overlapping fragments. The entire sbpA sequence indicated one open reading frame of 3,804 bp encoding a protein of 1,268 amino acids with a theoretical molecular mass of 132,062 Da and a calculated isoelectric point of 4.69. The N-terminal part of SbpA, which is involved in anchoring the S-layer subunits via a distinct type of secondary cell wall polymer to the rigid cell wall layer, comprises three S-layer-homologous motifs. For screening of amino acid positions located on the outer surface of the square S-layer lattice, the sequence encoding Strep-tag I, showing affinity to streptavidin, was linked to the 5' end of the sequence encoding the recombinant S-layer protein (rSbpA) or a C-terminally truncated form (rSbpA(31-1068)). The deletion of 200 C-terminal amino acids did not interfere with the self-assembly properties of the S-layer protein but significantly increased the accessibility of Strep-tag I. Thus, the sequence encoding the major birch pollen allergen (Bet v1) was fused via a short linker to the sequence encoding the C-terminally truncated form rSpbA(31-1068). Labeling of the square S-layer lattice formed by recrystallization of rSbpA(31-1068)/Bet v1 on peptidoglycan-containing sacculi with a Bet v1-specific monoclonal mouse antibody demonstrated the functionality of the fused protein sequence and its location on the outer surface of the S-layer lattice. The specific interactions between the N-terminal part of SbpA and the secondary cell wall polymer will be exploited for an oriented binding of the S-layer fusion protein on solid supports to generate regularly structured functional protein lattices.