Polyaniline/Multi Walled Carbon Nanotubes-A Promising Photocatalyst Composite for Reactive Blue 4 Oxidation.

For the photocatalytic removal of the Reactive Blue 4 dye from an aqueous stream, new polyaniline/multi walled carbon nanotube nanocomposites (PANI-MWCNTs) were applied as a promising photocatalyst. The PANI-MWCNT nanocomposites were fabricated by aniline oxidation in the presence of MWCNTs using the typical direct oxidation polymerization route. The morphology, the Fourier transform infrared (FTIR) spectra and the UV-Vis absorbance spectra of the fabricated nanocomposites were studied and the attained data confirmed the good interaction between the MWCNTs and PANI matrix. The PANI-MWCNTs nanocomposites were varied according to the wt%, the MWCNTs, which ranged from 0-10 wt% and the corresponding resultant samples are labeled as P-0, P-3, P-5, P-5, P-7 and P-10, respectively. Such composites showed the high potential for the removal of the Reactive Blue 4 dye containing pollutants from wastewater. The starting concentration of the dye pollutants was halved during the first 5 min of UV illumination. The oxidation technique of Reactive Blue 4 over the prepared nanocomposites were processed in a different way and the highest catalytic activity corresponded to P-7. The process reached the complete dye removal in low concentrations of contaminants. The kinetics of the removal followed the pseudo-second order regime which possesses high correlation coefficients with the k2 in the range of 0.0036-0.1115 L.mg-1.min-1 for the Reactive Blue 4 oxidation. In this regard, the combination of the PANI and MWCNTs showed a superior novel photocatalytic activity in the oxidation of commercial textile dying wastewater, namely Reactive Blue 4. This study is the starting point for future applications on an industrial scale since the successful performances of the PANI-MWCNT on commercial dye oxidation.

Photoinduced p- to n-type Switching in Thermoelectric Polymer-Carbon Nanotube Composites.

UV-induced switching from p- to n-type character is demonstrated during deposition of carbon-nanotube-conjugated polymer composites. This opens the possibility to photopattern n-type regions within an otherwise p-type film, which has a potential for complementary circuitry or, as shown here, thermoelectric generators made from a single solution.