Solusomes (novel soluplus® enriched nano-vesicular carriers) for improving the oral bioavailability of Candesartan cilexetil.

Candesartan cilexetil (CAN) is administered for treating hypertension and heart failure. CAN suffers poor oral bioavailability, owing to limited aqueous solubility, and first-pass metabolism. Solusomes (novel Soluplus® enriched nano-vesicular carriers) combine the merits of Soluplus®, and the traditional liposomes. They were explored to increase CAN solubility, allow a high drug release rate, and improve the oral drug bioavailability. Solusomes were developed via thin film hydration technique utilizing lipid (phosphatidylcholine; PC) and polymeric solubilizer (Soluplus®; Solu). S6 system comprising PC (0.1% w/v), CAN and Soluplus® (at 1:5 ratio; w/w), following a 5 min sonication period, was the optimum one with respect to drug entrapment efficiency (83.5 ± 2.6%), drug loading (11.9 ± 0.3%), particle size and shape (377.2 ± 12.1 nm, spherical), zeta-potential (-19.6 ± 2.1 mV), saturated drug solubility (32.09 ± 0.71 µg/mL), drug released % after 1 h (68 ± 0.9%), and stability. Significantly higher Cmax (969.12 ± 46.3 ng/mL), shorter median Tmax (1h), and improved relative bioavailability (≈ 6.8 folds) in rabbits could evidence the potential of S6 system in enhancing oral CAN bioavailability. S6 solusomes act as dual platform to improve the oral drug bioavailability and maintain effective drug concentration for a prolonged period.

Nanosized ethosomal dispersions for enhanced transdermal delivery of nebivolol using intradermal/transfollicular sustained reservoir: in vitro evaluation, confocal laser scanning microscopy, and in vivo pharmacokinetic studies.

Nebivolol (NBV), a BCS class II anti-hypertensive drug, suffers from limited solubility and oral bioavailability. Nanosized ethosomes were adopted as an approach to solubilize and deliver NBV transdermally, as a substitute to oral route. Ethosomal dispersions were prepared employing thin film hydration method. Formulation variables were adjusted to obtain entrapment efficiency; EE > 50%, particle size; PS < 100 nm, zeta potential; ZP > ±25 mV, and polydispersity index; PDI < 0.5. The optimized ethosomal dispersion (OED) showed accepted EE 86.46 ± 0.15%, PS 73.50 ± 0.08 nm, ZP 33.75 ± 1.20 mV, and PDI 0.31 ± 0.07. It also showed enhanced cumulative amount of NBV permeated at 8 h (Q8) 71.26 ± 1.46% and 24 h (Q24) 98.18 ± 1.02%. TEM images denoted spherical vesicles with light colored lipid bi-layer and dark core. Confocal laser scanning microscopy showed deeply localized intradermal and transfollicular permeation of the fluorolabelled OED (FL-OED). Nanosized FL-OED (<100 nm) can permeate through hair follicles creating a drug reservoir for enhanced systemic absorption. OED formulated into transdermal patch (OED-TP1) exhibited accepted physicochemical properties including; thickness 0.14 ± 0.01 mm, folding endurance 151 ± 0.07, surface pH 5.80 ± 0.15, drug content 98.64 ± 2.01%, mucoadhesion 8534 ± 0.03, Q8 87.61 ± 0.11%, and Q24 99.22 ± 0.24%. In vivo pharmacokinetic studies showed significantly enhanced bioavailability of OED-TP1 by 7.9 folds compared to oral Nevilob® tablets (p = 0.0002). It could be concluded that OED-TP1 can be a promising lipid nanocarrier TDDS for NBV and an efficacious alternative route of administration for hypertensive patients suffering from dysphagia.

Ethosomes loaded with lipophilic drugs, as NBV, can have two possible pathways of permeation through the skin; intradermal and transfollicular.Nanosized ethosomes (< 100 nm) can produce efficient intradermal and transfollicular reservoirs for sustained drug delivery.The formulated transdermal patch loaded with the optimized ethosomal dispersion (OED) showed enhanced bioavailability by 7.9 folds compared to Nevilob® oral tablets.

Fabrication of gastro-floating sustained-release etoricoxib and famotidine tablets: design, optimization, in-vitro, and in-vivo evaluation.

In this study, a new gastro-floating sustained-release tablet (GFT) with a combination of Etoricoxib (ET) and Famotidine (FM) was successfully developed. GFTs were prepared by using a combination of hydrophilic swellable natural/semi-synthetic polymers as a controlled-release layer. Through a 24 full factorial statistical experimental design, the effects of formulation factors on the release of GFTs were conducted. The ideal floating tablet (FT) comprised konjac-gum (150 mg), guar-gum (26.57 mg), xanthan-gum (54.17 mg), and HPMC-K15-M (69.25 mg). The ideal FT exhibited a high swelling index (SI) (297.7%) and rapid FLT (around 50 s) in 0.1 N HCl as well as controlled release of ET (22.43% in 1 h and 77.47% in 8 h) and FM (24.89% in 1 h and 93.82% in 8 h) with the absence of any drug-excipient interactions. The AUC0∼72 (ng h/mL) of ET and FM in the GFTs were approximately double-fold of the market, respectively. The relative bioavailability was (207.48 ± 12.02% and 208.51 ± 13.11%) compared with commercial tablets. The X-ray imaging showed a promising buoyancy ability for approximately 8 h. These findings revealed the successful preparation of the sustained-release floating tablet with improved dual drug delivery.

Intranasal bilosomes in thermosensitive hydrogel: advancing desvenlafaxine succinate delivery for depression management.

Depression, the second biggest cause of disability worldwide, is widespread. Many antidepressant medications, including Desvenlafaxine Succinate (D.V.S.), function by elevating neurotransmitter levels at the synapse through the inhibition of reabsorption by neurons. However, the effectiveness of these treatments is often limited by their inability to reach the brain using conventional administration methods. Bilosome-stabilized nanovesicles containing bile salts have drawn much interest because of their adaptability and versatility in various applications. This study aimed to address this issue by formulating intranasal bilosomes incorporated into a mucoadhesive in situ gel to deliver D.V.S. directly to the brain for depression treatment. The desvenlafaxine-loaded bilosomes were developed using a thin film hydration method based on the l-optimal design. They were intended to provide a more convenient route of administration for antidepressants, enhancing bioavailability and brain targeting through intranasal delivery. The study assessed the optimized bilosomes for particle size (311.21 ± 0.42 nm), Zeta potential (-37.35 ± 0.43)and encapsulation efficiency (99.53 ± 0.41%) and further evaluated them in ex vivo and in vivo pharmacokinetics studies. Pharmacokinetic data reveal enhanced brain uptake compared to a free drug. A statistically optimized bilosome formulation was determined. The intranasal administration of mucoadhesive in situ gel containing desvenlafaxine succinate-loaded bilosomes facilitated direct nose-to-brain drug delivery, improving brain bioavailability.

New Insight for Enhanced Topical Targeting of Caffeine for Effective Cellulite Treatment: In Vitro Characterization, Permeation Studies, and Histological Evaluation in Rats.

Cellulite (CLT) is one of the commonly known lipodystrophy syndromes affecting post-adolescent women worldwide. It is topographically characterized by an orange-peel, dimpled skin appearance hence, it is an unacceptable cosmetic problem. CLT can be modulated by surgical procedures such as; liposuction and mesotherapy. But, these options are invasive, expensive and risky. For these reasons, topical CLT treatments are more preferred. Caffeine (CA), is a natural alkaloid that is well-known for its prominent anti-cellulite effects. However, its hydrophilicity hinders its cutaneous permeation. Therefore, in the present study CA was loaded into solid lipid nanoparticles (SLNs) by high shear homogenization/ultrasonication. CA-SLNs were prepared using Compritol® 888 ATO and stearic acid as solid lipids, and span 60 and brij™35, as lipid dispersion stabilizing agents. Formulation variables were adjusted to obtain entrapment efficiency (EE > 75%), particle size (PS < 350 nm), zeta potential (ZP < -25 mV) and polydispersity index (PDI < 0.5). CA-SLN-4 was selected and showed maximized EE (92.03 ± 0.16%), minimized PS (232.7 ± 1.90 nm), and optimum ZP (-25.15 ± 0.65 mV) and PDI values (0.24 ± 0.02). CA-SLN-4 showed superior CA release (99.44 ± 0.36%) compared to the rest CA-SLNs at 1 h. TEM analysis showed spherical, nanosized CA-SLN-4 vesicles. Con-LSM analysis showed successful CA-SLN-4 permeation transepidermally and via shunt diffusion. CA-SLN-4 incorporated into Noveon AA-1® hydrogel (CA-SLN-Ngel) showed accepted physical/rheological properties, and in vitro release profile. Histological studies showed that CA-SLN-Ngel significantly reduced mean subcutaneous fat tissue (SFT) thickness with 4.66 fold (p = 0.035) and 4.16 fold (p = 0.0001) compared to CA-gel, at 7th and 21st days, respectively. Also, significant mean SFT thickness reduction was observed compared to untreated group with 4.83 fold (p = 0.0005) and 3.83 fold (p = 0.0043), at 7th and 21st days, respectively. This study opened new avenue for CA skin delivery via advocating the importance of skin appendages. Hence, CA-SLN-Ngel could be a promising nanocosmeceutical gel for effective CLT treatment.

Topical delivery of extracted curcumin as curcumin loaded spanlastics anti-aging gel: Optimization using experimental design and ex-vivo evaluation.

Objective: This study aimed to extract and separate the organic coloring agent known as Curcumin from the rhizomes of Curcuma longa, and then to create Spanlastics that were loaded with curcumin using the ethanol injection technique. The optimized Spanlastic dispersions were then incorporated into a gel preparation for topical anti-aging use. The Spanlastic dispersions were analyzed for particle size, zeta potential, drug loading efficiency, and in vitro release profile. Furthermore, the rheological properties of the gel preparation were assessed, and a skin penetration study was conducted using confocal microscopy. Methods: Twelve different Curcumin-loaded Spanlastic dispersions using the ethanol injection method with Span® 60 as a surfactant and Tween® 80 as an edge activator in varying ratios. The dispersions were then subjected to various tests, such as particle size analysis, zeta potential measurement, drug entrapment efficiency assessment, and in vitro release profiling. The optimized formula was selected using Design-Expert® software version 13, then used to create a gel preparation, which utilized 2% HPMC E50 as a gelling polymer. The gel was evaluated for its rheological properties and analyzed using confocal microscopy. Additionally, Raman analysis was performed to ensure that the polymers used in the gel were compatible with the drug substance. Results: F5 formula, (that contains 10 mg Curcumin, and mixture 5 of span-tween mixtures that consist of 120 mg Span® 60 with 80 mg Tween® 80) was selected as the optimized formula with a desirability produced by Design Expert® software equal to 0.761, based on its particle size (212.8 ± 4.76), zeta potential (-29.4 ± 2.11), drug loading efficiency (99.788 ± 1.34), and in vitro release profile evaluations at Q 6hr equal to almost 100 %. Statistical significance (P < 0.05) was obtained using one-way ANOVA. Then F5 was used to formulate HPMC E50 gel-based preparations. The gel formula that was created and analyzed using Raman spectroscopy demonstrated no signs of incompatibility between the Curcumin and the polymers that were utilized.The confocal spectroscopy found that the anti-aging gel preparation showed promising results in terms of skin penetration. Also, images revealed that the gel could penetrate the layers of the skin (reached a depth of about 112.5 µm), where it could potentially target and reduce the appearance of fine lines and wrinkles. The gel also appeared to be well-tolerated by the skin, with no signs of irritation or inflammation observed in the images. Conclusion: The obtained results successfully confirmed the potential of the promising (F5) formula to produce sustained release action and its ability to be incorporated into 2% HPMC E50 anti-aging gel. The confocal microscopy study suggested that the anti-aging gel had the potential to be an effective and safe topical treatment for aging skin.

Sucrose acetate isobutyrate (SAIB) and glyceryl monooleate (GMO) hybrid nanoparticles for bioavailability enhancement of rivaroxaban: an optimization study.

This study aims to improve the RXB bioavailability using hybrid nanoparticles. A modified melt dispersion technique created different formulas with varying GMO-SAIB: RXB and GMO: SAIB ratios, with fixed GMO-SAIB: poloxamer 407 ratios. The PS, PDI, ZP, and EE were measured to determine the optimal formula, which was selected using Design-Expert™ software. The optimized formula was lyophilized and tested for PS, PDI, ZP, and EE. The chosen lyophilized formula (L4) was characterized using FTIR, DSC, PXRD, dissolution studies, and pharmacokinetics studies. The study found correlations between variables and identified how GMO-SAIB concentration affects drug encapsulation. The dissolution parameters were calculated, including % Q5 and % DE). The % Q5 values were 68.4 ± 1.7% and 89.7 ± 3.6% for Xarelto and L4 tablets, respectively. The % DE values were 89.7 ± 0.4% and 97.5 ± 2.1% for Xarelto and L4 tablets, respectively. The AUC values were 2117.0 ng.h/mL (±77.3) and 3919.4 ng.h/mL (±134.8) for Xarelto and L4 tablets, respectively. The Cmax values were 241.3 ng/mL (±21.0) and 521.5 ng/mL (±91.5) for Xarelto and L4 tablets, respectively. In conclusion, the study found that using GMO-SAIB as co-formers effectively enhanced the bioavailability of RXB. The authors recommend using the hybrid nanoparticles technique and suggest further research to enhance its effectiveness for drug delivery.

State-of-the-Art Review of Advanced Electrospun Nanofiber Composites for Enhanced Wound Healing.

Wound healing is a complex biological process with four main phases: hemostasis, inflammation, proliferation, and remodeling. Current treatments such as cotton and gauze may delay the wound healing process which gives a demand for more innovative treatments. Nanofibers are nanoparticles that resemble the extracellular matrix of the skin and have a large specific surface area, high porosity, good mechanical properties, controllable morphology, and size. Nanofibers are generated by electrospinning method that utilizes high electric force. Electrospinning device composed of high voltage power source, syringe that contains polymer solution, needle, and collector to collect nanofibers. Many polymers can be used in nanofiber that can be from natural or from synthetic origin. As such, electrospun nanofibers are potential scaffolds for wound healing applications. This review discusses the advanced electrospun nanofiber morphologies used in wound healing that is prepared by modified electrospinning techniques.

Eplerenone repurposing in management of chorioretinopathy: Mechanism, nanomedicine-based delivery applications and future trends.

Chronic central serous chorioretinopathy (CSCR) is an ocular threatening disease, a common cause of central vision loss, affecting the posterior pole of the eye. Eplerenone (EPL) is a selective mineralocorticoid receptor antagonist that is primarily used to treat hypertension. Recently, it has shown many benefits in modifying the physio-pathological processes occurring upon stimulation of renin-angiotensin-aldosterone system at the ocular level. In CSCR treatment, several clinical studies and case reports prove the efficacy and safety of EPL. However, setbacks for such studies include a relatively small number of participants and short follow-up periods. This review article is intended to describe theories about the nature and classification of CSCR and recapitulate EPL therapeutic benefits as selective mineralocorticoid receptor antagonist in the treatment of CSCR. Furthermore, we survey the literature on clinical studies discussing the results of use of EPL in treatment of CSCR. In addition, EPL therapeutic formulations that have been developed are described, and future potential delivery systems will be suggested.

Lipid based nanoparticles as a novel treatment modality for hepatocellular carcinoma: a comprehensive review on targeting and recent advances.

Liver cancer is considered one of the deadliest diseases with one of the highest disease burdens worldwide. Among the different types of liver cancer, hepatocellular carcinoma is considered to be the most common type. Multiple conventional approaches are being used in treating hepatocellular carcinoma. Focusing on drug treatment, regular agents in conventional forms fail to achieve the intended clinical outcomes. In order to improve the treatment outcomes, utilizing nanoparticles-specifically lipid based nanoparticles-are considered to be one of the most promising approaches being set in motion. Multiple forms of lipid based nanoparticles exist including liposomes, solid lipid nanoparticles, nanostructured lipid carriers, microemulsion, nanoemulsion, phytosomes, lipid coated nanoparticles, and nanoassemblies. Multiple approaches are used to enhance the tumor uptake as well tumor specificity such as intratumoral injection, passive targeting, active targeting, and stimuli responsive nanoparticles. In this review, the effect of utilizing lipidic nanoparticles is being discussed as well as the different tumor uptake enhancement techniques used.

Efficacy of pomegranate extract loaded solid lipid nanoparticles transdermal emulgel against Ehrlich ascites carcinoma.

The purpose of this work was to incorporate an optimized pomegranate extract loaded solid lipid nanoparticles (PE-SLNs) formula in a transdermal emulgel to evaluate its anticancer effect. The prepared emulgel formulae were evaluated for their physicochemical properties. An ex vivo permeation study was done through mouse skin and the kinetic parameters were determined. Kinetic data showed that the ex vivo permeation of PE from SLNs transdermal emulgel through mouse skin followed non-Fickian diffusion transport. Further, in vivo study was done by applying the optimized PE-SLNs transdermal emulgel on mice skin bearing a solid form of Ehrlich ascites carcinoma (EAC) as well as free PE, control, placebo, and standard groups for comparison. In addition, histopathological examinations of the samples obtained from the EAC mice model were performed. The results proved that application of the selected PE-SLNs emulgel formulation on the mice skin bearing solid tumor revealed statistically significant anticancer effects.

Clove Oil Endorsed Transdermal Flux of Dronedarone Hydrochloride Loaded Bilosomal Nanogel: Factorial Design, In vitro Evaluation and Ex vivo Permeation.

The goal of this study was to develop a bilosomal gel formulation to enhance transdermal permeability of dronedarone hyrdrochloride (DRN) which suffers from poor oral absorption and limited bioavailability. To overcome this obstacle, bilosomes were successfully prepared using 23 full-factorial design. Span®40, cholesterol, sodium deoxycholate (bile salt), clove oil (permeability enhancer), and either Tween® 60 or Tween® 80 (edge activator) were used in bilosome preparation by ethanol injection method. In this design, independent variables were X1, edge activator type; X2, edge activator amount (mg); and X3, permeability enhancer concentration (% w/v). Optimal formula (B2) of the highest desirability of (0.776) demonstrated minimum vesicle size (VS) of 312.4 ± 24.42 nm, maximum absolute value of zeta potential (ZP) - 36.17 ± 2.57 mV, maximum entrapment efficiency (EE %) of 80.95 ± 3.01%, maximum deformability Index (DI) of 8.24 ± 1.26 g and maximum drug flux after 12 h (J12) of 21.23 ± 1.54 µg/cm2 h upon ex vivo permeation study. After 12 h, 70.29 ± 6.46% of DRN was released from B2. TEM identification of B2 showed spherical shaped nanosized vesicles which were physically stable for 3 months at different temperatures. B2 was incorporated into carboxymethylcellulose gel base for easiness of dermal application. B2 gel demonstrated good physical properties, non-Newtonian psuedoplastic flow, and enhanced release (57.0 ± 8.68% of DRN compared to only 13.3 ± 1.2% released from drug suspension after 12 h) and enhanced skin permeation.

Bilosomes as a novel carrier for the cutaneous delivery for dapsone as a potential treatment of acne: preparation, characterization and in vivo skin deposition assay.

In our study, the potential of bilosomes as novel vesicular carrier for the cutaneous delivery of the sulphone compound, Dapsone, for topical treatment of acne was investigated. The effect of different formulation variables (type and concentration of bile salt, and molar ratio of Span 60:cholesterol) on the properties of DPS-loaded bilosomes was investigated using a full factorial design. Design Expert software was used for data analysis and optimization of DPS-loaded bilosomes. The optimized bilosomes, chosen on the basis of their superior properties giving maximum entrapment, in vitro release after different time intervals and RE% with minimum vesicle size. Results showed that the bilosome system prepared using Span® 60: Cholesterol (5:1) and containing 0.25 M sodium deoxycholate as the bile salt was found to obey these criteria, with a desirability value of 0.637. Therefore, this system was chosen for further assessment for its morphological properties, zeta potential, thermal analysis using differential scanning calorimetry and X-ray diffractometry. Results revealed that the chosen bilosomes were spherical in shape with no aggregation, and contained DPS in a molecularly dispersed amorphous form. Finally, the capability of the optimized DPS-loaded bilosomes to deliver DPS through rat skin layers will be investigated and compared with that of DPS alcoholic solution. Results showed that the amounts of DPS retained in the skin treated with DPS-loaded bilosomes, and DPS alcoholic solution after 24 h were found to be 170.57 ± 55.12 and 120.24 ± 10.7 µg/mL, respectively, representing about 1.5-fold higher drug retained in the bilosomes-treated skin. Finally, the safety and the tolerability of the prepared bilosomes were assessed using histopathological examination, and revealed that the control untreated skin sections and skin sections treated with DPS-loaded bilosomes showed normal histological structures characterized by absence of defects or inflammation. Such results can be considered a good addition in the field of pharmaceutical drug delivery for effective topical therapy of acne.

Formulation and evaluation of niosomal vesicles containing ondansetron HCL for trans-mucosal nasal drug delivery.

Ondansetron HCl is a (5-HT3) serotonin receptor antagonist, used as anti-emetic drug in combination with anticancer agents. Conventional dosage forms have poor bioavailability and patient compliance. These problems can be reduced by the use of nasal niosomal thermo-reversible in situ gelling system. Niosomes were formulated using various surfactants (Span 60, Span 80, Tween 20, and Tween 80) in different ratios using the thin-film hydration technique. Niosomes were evaluated for particle size, zeta potential, transmission electron microscopy (TEM) imaging, drug entrapment efficiency, and in vitro drug release. Niosomes prepared using Span 60 and cholesterol in the ratio 1:1 (F5) showed higher entrapment efficiency (76.13 ± 1.2%) and in vitro drug release (91.76%) after 12 h was optimized. The optimized niosomes were developed into thermo-reversible in situ gel, composed of Poloxamer 407 and sodium carboxymethyl cellulose, prepared by cold method technique. Compatibility study (FTIR, DSC) was made for drugs and excipients that showed no significant interaction. The gel formulation G5 showed the most suitable gelation temperature (31 °C), viscosity (1250 mpoise), bioadhesion force (5860 ± 28 dyne/cm2), and in vitro drug release (70.6%) after 12 h. Comparative in vivo pharmacokinetic study on rabbits showed a sustained release and higher relative bioavailability of the prepared nasal in situ gel compared to similar dose of oral tablets (202.4%) which make ondansetron HCl niosomal nasal thermo-sensitive in situ gel a more convenient dosage form for the administration of ondansetron HCl than oral tablets.

Core in Cup Ethylmorphine Hydrochloride Tablet for Dual Fast and Sustained Pain Relief: Formulation, Characterization, and Pharmacokinetic Study.

Ethylmorphine hydrochloride (EtM) is a derivative of morphine used as analgesic to treat severe pain in case of cancer and bone injury. This study aimed to formulate and evaluate core in cup tablets containing 2 doses of EtM, the cup was formulated as lyophilized oro-dispersible tablet (ODT) for immediate release (IR), and the core was formulated as directly compressed tablet for sustained release (SR). Factorial design was adopted for the optimization of tablets prepared via lyophilized form and direct compression techniques: a 41.22 design was used for the former, while a 32 one was used for the latter. All prepared tablets showed acceptable physical properties which were in accordance with pharmacopeial standards. Two lyophilized ODTs (F9 and F10) formulae were selected as the cup for instant release. While one directly compressed tablet formula (S6) was selected based on the in vitro release profile to represent the sustained core, the outcome was 2 core in cup tablets, namely B1 and B2 which were evaluated for their in vivo absorption and showed a maximum plasma concentration (Cpmax) of 354.12 ± 17.55 ng/mL and 350.82 ± 12.15 ng/mL respectively attained after 3.0 h which were twofolds significantly higher in comparison to the market tablet with Cpmax of only 172.05 ± 12.53 ng/mL attained after 2.20 ± 0.24 h.

Eco-friendly synthesis of functionalized chitosan-based nanoantibiotic system for potential delivery of linezolid as antimicrobial agents.

To obtain a healthy human being with beneficial microflora against different pathogenic infections, classical antibiotics with nanosized biomaterials were used to inhibit the growth of bacterium by their potent synergistic effect. Hence, this study planned to load an oxazolidinone antibiotic named linezolid (LD) onto functionalized chitosan (CN) with 3, 5- dinitrosalyslic acid (DA) via microwave synthesis without harsh condition. The exploring synergistic effect of linezolid (LD) with CN/DA controllable nanostructure was compact efflux-mediated methicillin-resistant Staphylococcus aureus (MRSA) burden and other selected bactericide Gram-positive ((S. aureus), Gram-negative (E. coli), Fungi (C. albicans), Yeast (A. niger), and E. faecalis. The obtained results showed that LD was incorporated into both the internal and external surface of the aggregated CN/DA nanosystem with an average diameter of 150 nm ± 4 hints of the drug loading. Owing to the nature of functionalized CN, the release efficiency attains 98.4% within 100 min. The designed LD@CN/DA exhibited inhibition zone 54 mm, 59 mm, 69 mm, 54 mm, 57 mm, and 24 mm against the tested microbes respectively rather than individual LD. The major target of the current research is achieved by using LD@CN/DA as a nanoantibiotic system that has exceptional consistently active against multi-resistant pathogens, in between MRSA which resist LD. Also, cell viability was performed even after three days of direct cell culture on the surface of the designed nanoantibiotic. The mechanism of microbial inhibition was correlated and rationalized to different charges and the presence of oxygen species against microbial infections. Our findings provide a deep explanation about nanostructured antibiotics design with enhanced potentially pathogen-specific activity.

Cubosomal based oral tablet for controlled drug delivery of telmisartan: formulation, in-vitro evaluation and in-vivo comparative pharmacokinetic study in rabbits.

A nanoparticulate system; cubosomes has been suggested to support the controlled release of Telmisartan (TEL), a poorly water-soluble medication. Four distinctive formulae were selected according to the results of three estimated responses. The liquid cubosomes were successfully adsorbed onto Aerosil 380 to form granules. The formulae were evaluated for their flow properties. The best granules were compressed into tablets suitable for oral administration. The tablets were evaluated for its performance. The in vivo study of the best selected cubosomal tablets was checked after oral administration in the blood of albino rabbits utilizing an HPLC method. Results revealed that the highest EE was shown in formulae C5 (59.68 ± 1.3). All the prepared formulae had particle size less than 500 nm with PDI < 0.5 and the highest zeta potential results were observed in C5, C7, C9, C11 and C12 (>30 mv). A7 and A9 prepared using Aerosil 380 showed a perfect flowability. After 1 h of dissolution testing, the commercial product showed a 66% drug release while the release of all cubosomal formulae didn't exceed 35% during the first hour reaching a 85% of the drug released at the end of 24 h. A7 was selected for the in vivo study; Tmax of TEL absorption is increased for cubosomal formula by three folds indicating sustained release pattern. The relative bioavailability is also increased by 2.6 fold. The investigation proposed the rationality of cubosome to figure an effective controlled release tablets to improve its bioavailability and expand its activity.

Natamycin niosomes as a promising ocular nanosized delivery system with ketorolac tromethamine for dual effects for treatment of candida rabbit keratitis; in vitro/in vivo and histopathological studies.

OBJECTIVES: This study was aimed to develop dual-purpose natamycin (NAT)-loaded niosomes in ketorolac tromethamine (KT) gels topical ocular drug delivery system to improve the clinical efficacy of natamycin through enhancing its penetration through corneal tissue and reducing inflammation associated with Fungal keratitis (FK). SIGNIFICANCE: Nanosized carrier systems, as niosomes would provide great potential for improving NAT ocular bioavailability.NAT niosomal dispersion formulae were prepared and then incorporated in 0.5%KT gels using different mucoadhesive viscosifying polymers. METHODS: Niosomes were prepared using the reverse-phase evaporation technique. In vitro experimental, and in vivo clinical evaluations for these formulations were done for assessment of their safety and efficacy for treatment of Candida Keratitis in Rabbits. In vitro release study was carried out by the dialysis method. In vivo and histopathological studies were performed on albino rabbits. RESULTS: NAT niosomes exhibited high entrapment efficiency percentage (E.E%) up to96.43% and particle size diameter ranging from 181.75 ± 0.64 to 498.95 ± 0.64 nm, with negatively charged zeta potential (ZP). NAT niosomal dispersion exhibited prolonged in vitro drug release (40.96-77.49% over 24h). NAT-loaded niosomes/0.5%KT gel formulae revealed retardation in vitro release, compared to marketed-product (NATACYN®) and NAT-loaded niosomes up to57.32% (F8). In vivo experimental studies showed the superiority for F8 in treatment of candida keratitis and better results on corneal infiltration and hypopyon level. These results were consistent with histopathological examination in comparison with F5 and combined marketed products (NATACYN® and Ketoroline®). CONCLUSIONS: This study showed that F8 has the best results from all pharmaceutical in vitro evaluations and a better cure percent in experimental application and enhancing the prolonged delivery of NAT and penetrating the cornea tissues.

Dual-purpose vardenafil hydrochloride/dapoxetine hydrochloride orodispersible tablets: in vitro formulation/evaluation, stability study and in vivo comparative pharmacokinetic study in healthy human subjects.

Erectile dysfunction (ED) is the most important disorder after premature ejaculation for sexual activity in men. Vardenafil hydrochloride (VH) is an oral therapy for the treatment of erectile dysfunction. VH oral disintegrating tablets (ODTs) have been prepared by freeze drying technique to improve its dissolution profile and the overall clinical performance. Dapoxetine hydrochloride (DH) was added to the best three formulae of the prepared VH ODTs to treat premature ejaculation. All the ODTs formulae were evaluated for weight variation, friability, drug content, in vitro disintegration time, wetting time, and the dissolution study. Gelatin as a matrix former with N-methylpyrrolidone as a solubilizer in VH/DH ODTs improved the dissolution rate and extent of release of VH and DH with 100% of drug being dissolved after 15 min. In vivo study results from six healthy male volunteers showed shorter Tmax of VH from VH/DH ODT of 0.583 ± 0.129 h and shorter Tmax of DH from VH/DH ODT of 0.625 ± 0.137 h and showed AUC0-12 of VH from VH/DH ODT of 39.234 ± 10.932 ng/ml h1 and AUC0-12 of DH from VH/DH ODT of 531.681 ± 129.544 ng/ml h1, with relative bioavailability values of 100.9 and 85%, respectively, compared to (Levitra®) and (Priligy®).

Novel instantly-dispersible nanocarrier powder system (IDNPs) for intranasal delivery of dapoxetine hydrochloride: in-vitro optimization, ex-vivo permeation studies, and in-vivo evaluation.

Dapoxetine (D) suffers from poor oral bioavailability (42%) due to extensive metabolism in the liver. The aim of this study was to enhance the bioavailability of D via preparing instantly-dispersible nanocarrier powder system (IDNPs) for intranasal delivery of D. IDNPs were prepared using the thin film hydration technique, followed by freeze-drying to obtain easily reconstituted powder providing rapid and ready method of administration. The produced nanocarrier systems were evaluated for drug content, entrapment efficiency percentage, particle size, polydispersity index, zeta potential, and drug payload. The optimized nanocarrier system was morphologically evaluated via transmission electron microscopy and the optimized freeze-dried IDNPs were evaluated for ex-vivo permeation and in-vivo pharmacokinetic studies in rabbits following intranasal and oral administration. The relative bioavailability of D after intranasal administration of freeze-dried IDNPs was about 235.41% compared to its corresponding oral nanocarrier formulation. The enhanced D permeation and improved bioavailability suggest that IDNPs could be a promising model for intranasal delivery of drugs suffering from hepatic first pass effect.