RESUMO
Thallium (Tl) as a prominent priority contaminant in aquatic environment necessitates rigorous regulation. However, limited horizon devotes the impact of selective oxidation on the process of thallium purification. In this study, selective active radical of singlet oxygen (1O2) was continually generated for Tl(â ) oxidation accomplished with efficient Tl(â ¢) immobilization using iron-driven copper oxide (CuFe)/peroxymonosulfate (PMS). Fe-doping changed the active center of electronic structure for enhancing the catalytic and adsorptive reactivities, and installed magnetism for solid-liquid separation. Rapid reaction rate (0.253 min-1) coupled with vigorous elimination efficiency (98.32%) relied on electrostatic attraction, surface complexation, and H-bond interaction. EPR and XPS analyses demonstrated that the synergistic effects of ≡ Cu(â )/≡Cu(â ¡) and ≡ Fe(â ¢)/≡Fe(â ¡) redounded to the sustained generation of 1O2 through the pathway of PMS â â¢O2- â 1O2, and 1O2 exploited an advantage to selectively oxidize Tl(â ) to Tl(â ¢). 3D isosurface cubic charts revealed that the immobilizing ability of Tl(â ¢) hydrate for CuFe was notably superior to that of Tl(â ¢) hydrate for CuO and Tl(â ) hydrate for CuO/CuFe, which further attested surface reactivity promoted stable immobilization form. This work develops the continuous generation of 1O2 and stable immobilization with the goal of efficiently cleansing Tl-containing wastewater.
Assuntos
Ferro , Oxigênio Singlete , Tálio , Tálio/química , Ferro/química , Oxigênio Singlete/química , Oxirredução , Cobre/química , CatáliseRESUMO
It is very important to control methane emissions to reduce global warming. In this study, a new attempt of one oxidant (potassium peroxymonosulfate (PMS)) was made to adjust the oxidation-reduction potential (Eh) by adding different mass of (0 g, 31.25 g, 62.5 g, 125 g, 250 g and 500 g) for the reduction of methane emissions from integrated vertical-flow constructed wetland (IVCW), where the IVCW system has been divided into the root-water system and the stem-leaf system of methane emissions. Results show that the reduced CH4 emission from IVCW was the highest with decreased by 43.5% compared to blank group (PMS = 0), when adding 125 g PMS. Importantly, the reduced CH4 from the root-water system of IVCW was higher than that of the stem-leaf system of IVCW, when adding PMS. It's found that Eh not only has a significant correlation with CH4 flux, but also has a significant relationship between PMS quality, DO, water temperature and sampling time (yEh = -0.44XPMS + 6.82XDO + 0.38t - 264.1, R2 = 0.99). It concludes that PMS, as an oxidant, is a very feasible method for controlling methane emissions from IVCW. It's concluded from this study that it is a feasible engineering method by using PMS as an oxidant for reducing methane emissions from IVCWs when treating artificial domestic sewage. Further research may combine other methods together such as microbiology, physical control and hydrology control for mitigating the CH4 emissions from constructed wetlands for more types of wastewater.
Assuntos
Metano , Áreas Alagadas , Oxidantes , Água , Dióxido de CarbonoRESUMO
Riparian buffers benefit both natural and man-made ecosystems by preventing soil erosion, retaining soil nutrients, and filtering pollutants. Nevertheless, the relationship between vertical methane fluxes, soil carbon, and methane microbial communities in riparian buffers remains unclear. This study examined vertical methane fluxes, soil carbon, and methane microbial communities in three different soil depths (0-5 cm, 5-10 cm, and 10-15 cm) within a riparian buffer of a Sponge City Park for one year. Structural equation model (SEM) results demonstrated that vertical methane fluxes varied with soil depths (λ = -0.37) and were primarily regulated by methanogenic community structure (λ = 0.78). Notably, mathematical regression results proposed that mcrA/pmoA ratio (R2 = 0.8) and methanogenic alpha diversity/methanotrophic alpha diversity ratio (R2 = 0.8) could serve as valid predictors of vertical variation in methane fluxes in the riparian buffer of urban river. These findings suggest that vertical variation of methane fluxes in riparian buffer soils is mainly influenced by carbon inputs and methane microbial abundance and community diversity. The study's results quantitatively the relationship between methane fluxes in riparian buffer soils and abiotic and biotic factors in the vertical direction, therefore contributing to the further development of mathematical models of soil methane emissions.
Assuntos
Euryarchaeota , Microbiota , Humanos , Solo/química , Metano , Carbono , Microbiologia do SoloRESUMO
Increased agricultural surface runoff in rural watersheds is a leading cause of nonpoint source pollution. In this study, a new biomass concentrator reactor (BCR) is conducted to degrade simulated agricultural surface runoff for both start-up process and treatment process. The results show that both in the start-up phase and in the stable phase, BCR had a good degradation effect on simulated agricultural surface runoff. Within 13 days-15 days of completed start-up of BCR, degradation of COD can be considered to the first-order kinetics: lnCt=lnC0-0.1377t (R2 = 0.78). During the stabilization phase, the average removal rate of COD, NH4+-N, NO3--N, TN and TP from the effluents through the BCR membrane was 94.58%, 85.79%, 53.58%, 37.87%, and 60.62%, respectively, which was increased by 7.4%, 2.5%, 5.1%, 0.18% and 11.4%, respectively, compared to control experiment which the effluents without membrane. The pollutants degradation by BCR in stable phase show a partly relative model of Lawrence-McCarty equation, which the nitrogen and phosphorus degradation is vN=(4.1+S)/(2.53×S) (R2 = 0.69) and vP=(8.78+S)/(3.0×S) (R2 = 0.67), respectively. In the stable phase, the operation cost of BCR is about $0.08/(Lâ¢d). Future research on improved BCR maybe focus on the membrane pollution and cleaning, optimized operation conditions, new materials of membrane.
Assuntos
Movimentos da Água , Poluentes Químicos da Água , Biomassa , Monitoramento Ambiental , Nitrogênio/análise , Fósforo/análise , Poluentes Químicos da Água/análise , Poluição da ÁguaRESUMO
Dyes and drugs with high toxicity and low biodegradability pose risk to human health and ecological security, and should be purified efficiently from effluents before discharge. Traditional adsorbents are limited by the insufficient active adsorption sites and low stability. In this study, a novel aminated magnetic adsorbent (MCTs) was fabricated via two cross-linking steps using chitosan and triethylenetetramine to fill the gaps between current adsorbent and performance requirements. The morphological and physicochemical characteristics of the as-prepared MCTs were determined and identified with the aid of several characterization techniques. The adsorption performance of dyes and drugs was also investigated and represented by their adsorption capacities. In particular, the adsorption capacities of Congo Red, Chicago Sky Blue, Reactive Brilliant Red, and Ibuprofen were 583.11, 465.01, 403.12, and 291.71 mg/g, respectively. They also remained at around 80% after four reuse cycles. MCTs were adsorbed via a monolayer spontaneous chemical reaction, and hydrogen bonding and electrostatic interaction were the dominant adsorption mechanisms. These results demonstrated that the preparation of MCTs via two cross-linking steps enhanced the adsorbents' adsorption capacity, reusability, and stability. They provided a new perspective for the preparation of high-efficient adsorbents and the purification of dye- and drug-polluted wastewater.
Assuntos
Preparações Farmacêuticas , Poluentes Químicos da Água , Adsorção , Chicago , Corantes , Humanos , Concentração de Íons de Hidrogênio , Cinética , Fenômenos MagnéticosRESUMO
Carbon dioxide (CO2) and methane (CH4) produced by denitrification bioreactors in processing agricultural surface runoff have contributed to increasing proportion of greenhouse gases (GHG) emissions. It is the first time to monitor and quantify the emission flux of CO2 and CH4 produced by laboratory-scale denitrification bioreactors which recycled waste Cunninghamia lanceolata sawdust (CLS) and industrial sludge (IS) as fillers to process simulated agricultural surface runoff. Sludge-water ratio, inflow rate and water flow direction are used as experimental factors to study the effect on the emission flux of CO2 and CH4. Results show that emission flux of CO2 from denitrification bioreactors with different sludge-water ratio approached 20 mg m-2h-1, simultaneously the average emission flux of CH4 produced by all bioreactors was 1.785 mg m-2h-1. The addition of sludge increased the emission flux of CH4 and had no significant effect on the emission flux of CO2. Increasing the inflow rate reduced the CO2 emission flux from 21.57 to 1.27 mg m-2h-1, and at the same time increased the CH4 emission flux from 0.007 to 9.54 mg m-2h-1. The gravity flow of wastewater reduced the emission flux of CO2 and CH4. The emissions of CO2 and CH4 from folded plate denitrification bioreactor with CLS and industrial sludge with a volume ratio of 1:2 can be reduced by 24.67% and 73.3%, respectively. There was no need to add special gas collection and treatment devices because CO2 and CH4 emission fluxes produced by the folded plate denitrification bioreactor and gravity denitrification bioreactor are not enough to increase the greenhouse effect. This study quantified the CO2 and CH4 produced by denitrification bioreactors filling CLS and IS, and provided a reference for future research on the gases produced by the denitrification process.
Assuntos
Dióxido de Carbono , Metano , Reatores Biológicos , Dióxido de Carbono/análise , Desnitrificação , Óxido Nitroso/análise , EsgotosRESUMO
Succession of bacterial communities involved in the composting process of chicken manure, including first composting (FC), second composting (SC) and fertilizer product (Pd) and fertilized soil (FS), and their associations with nutrients, heavy metals, antibiotics and antibiotic resistance genes (ARGs) were investigated. Firmicutes, Proteobacteria, Bacteroidetes, and Actinobacteria were the dominant phyla observed during composting. Overall, potential pathogenic bacteria decreased from 37.18% (FC) to 3.43% (Pd) and potential probiotic taxa increased from 5.77% (FC) to 7.12% (Pd). Concentrations of heavy metals increased after second composting (SC), however, no significant differences were observed between FS and CS groups. Alpha diversities of bacterial communities showed significant correlation with heavy metals and nutrients. All investigated antibiotics decreased significantly after the composting process. The certain antibiotics, heavy metals, or nutrients was significantly positive correlated with the abundance of ARGs, highlighting that they can directly or indirectly influence persistence of ARGs. Overall, results indicated that the composting process is effective for reducing potential pathogenic bacteria, antibiotics and ARGs. The application of compost lead to a decrease in pathogens and ARGs, as well as an increase in potentially beneficial taxa and nutrients in soil.
Assuntos
Compostagem , Metais Pesados , Animais , Antibacterianos , Bactérias , Galinhas , Genes Bacterianos , Esterco , Nutrientes , Solo , Microbiologia do SoloRESUMO
Estuaries have been described as one of the most difficult environments on Earth. It is difficult to know how to treat the combined wastewater in tidal rivers at the estuary, where the situation is very different from ordinary fresh water rivers. Waste oyster shell was used as the active filler in this study in a bio-contact oxidation tank to treat the combined wastewater at the Fengtang Tidal River. With a middle-experimental scale of 360 m3/day, the average removal efficiency of COD, BOD, NH3-N, TP and TSS was 80.05%, 85.02%, 86.59%, 50.58% and 85.32%, respectively, in this bio-contact oxidation process. The living microbes in the biofilms on the waste oyster shell in this bio-contact oxidation tank, which were mainly composed of zoogloea, protozoa and micro-metazoa species, revealed that waste oyster shell as the filler was suitable material for combined wastewater degradation. This treatment method using waste oyster shell as active filler was then applied in a mangrove demonstration area for water quality improvement near the experiment area, with a treatment volume of 5 x 10(3) m3/day. Another project was also successfully applied in a constructed wetland, with a wastewater treatment volume of 1 x 10(3) m3/day. This technology is therefore feasible and can easily be applied on a larger scale.
Assuntos
Exoesqueleto/química , Estuários , Ostreidae , Eliminação de Resíduos Líquidos/métodos , Animais , China , Oxirredução , Purificação da ÁguaRESUMO
The interaction between tetracycline (TTC) and mixed metallic oxides remains unclear, and even complexation usually is ignored. This study firstly distinguished the triple functions of adsorption, transformation and complexation in presence of Fe-Mn-Cu nano-composite metallic oxide (FMC) on TTC. Rapid adsorption and faint complexation initiated the transformation that dominated the entire reactions at 180 min, which completed TTC removal (up to 99.04%) synergistically within 48 h. Environmental factors (dosage, pH and coexisting ions) had small influence on TTC removal, which primarily depended on the stable transformation characteristics of FMC. Kinetic models incorporating pseudo-second-order kinetics and transformation reaction kinetics demonstrated that the surface sites of FMC promoted electron transfer process through chemical adsorption and electrostatic attraction. ProtoFit program coupled with characterization methods concluded that Cu-OH was the main reaction site of FMC where the protonated surface favored to generate·O2-. Meanwhile, three metal ions developed simultaneous mediated transformation reactions on TTC in liquid phase, and·O2- induced the production of·OH. The transformed products were subjected to toxicity assessment, which had lost antimicrobial properties toward Escherichia coli. Insights gained from this study can refine the dual mechanisms of multipurpose FMC in solid and liquid phases underlying TTC transformation.
Assuntos
Óxidos , Poluentes Químicos da Água , Antibacterianos/toxicidade , Antibacterianos/química , Tetraciclina/toxicidade , Tetraciclina/química , Íons , Adsorção , Poluentes Químicos da Água/toxicidade , Poluentes Químicos da Água/análise , CinéticaRESUMO
A novel chelating flocculant with branched architectures, polyacrylamide grafted maleoyl chitosan-mercaptoacetic acid (PAM-g-M(CS-MA)), was successfully fabricated using maleic anhydride as the "bridge" between chitosan and polyacrylamide. The functional groups and structural characteristic information of copolymers were obtained via characterization analysis. Flocculation performance was systematically investigated via purifying a series of simulated wastewater containing Cu or Cd. The properties of the flocs were studied to give in-depth evidences for the role of chelation groups and branched architectures in flocculation. Results indicated that PAM-g-M(CS-MA) showed excellent flocculation capacity for heavy metals in high concentrations and was superior to other chelating flocculants. The maximum flocculation efficiency of Cu (93.90%) and Cd (92.47%) was achieved by PAM-g-M(CS-MA) at pH 7, dosage of 100 mg L-1 and stirring speed of 90 rpm. The flocculation mechanisms of PAM-g-M(CS-MA) were deeply explored through the analyses of floc properties. The strong synergistic chelation of mercapto, carboxyl, amide and hydroxyl groups predominated for the capturing of heavy metals; and the branched architectures facilitated the formation of large and stable flocs via adsorption and bridging-furl effect. This study provided a solid foundation for the fabrication of flocculants for heavy metal wastewater treatment.
Assuntos
Metais Pesados , Purificação da Água , Quelantes , Floculação , Águas ResiduáriasRESUMO
To reduce the polymerization difficulty of hydrophobic modified copolymers, a hydrophobic modified cationic flocculant was fabricated using nano-TiO2 as initiator with acrylamide (AM) and methyl acryloxyethyl dimethyl benzyl ammonium chloride (DML) as monomers, and named it PAD. The copolymers were characterized by scanning electron microscopy (SEM), nuclear magnetic resonance (1H NMR), Fourier transform infrared spectroscopy (FT-IR) and thermogravimetric analysis (TG). Results verified that PAD was synthesized successfully and nano-TiO2 was more conducive to DML grafting than traditional photo-initiators. Reaction kinetics demonstrated that the polymerization process was a typical precipitation polymerization initiated by free radicals. Flocculation performance of flocculant on simulated emulsified oil was evaluated and optimized. The simulation results indicated that the flocculation performance of PAD was superior to traditional flocculant, which was attributed to the higher content of DML in PAD. The maximum removal rate of emulsified oil could reach 92.10%, and the corresponding turbidity removal rate was 93.54%. Further, the mechanism studies suggested that the removal of emulsified oil was realized by the synergistic effects of electric neutralization, demulsification, hydrophobic association and adsorption bridging. The findings of this study showed that nano-TiO2 exhibited a promising prospect in the field of polymer-initiated polymerization.
Assuntos
Floculação , Cinética , Polimerização , Espectroscopia de Infravermelho com Transformada de Fourier , TitânioRESUMO
In this work, a novel process involving the preparation of nanochitosan-grafted flocculants (CPAM-g-NCS) to treat low turbid and salmonella suspensions simultaneously was introduced. Nanotechnology was employed to enhance the adsorption-adhesion and sterilization abilities of dual-functional flocculants. The monomers of chitosan, acrylamide, methacryloyl ethyl trimethyl ammonium chloride, and sodium tripolyphosphate were utilized for flocculants copolymerization. Then, using fourier-transform infrared spectroscopy, nuclear magnetic resonance hydrogen spectrum, and thermogravimetric and differential scanning calorimetry analysis, the successful synthesis of CPAM-g-NCS was verified. Scanning electron microscopy and size analysis suggested that nanostructured flocculants with irregular morphology and nanocolloids of 60.44â¯nm were formed. CPAM-g-NCS was applied to treat a series of simulated low turbid and salmonella suspensions. The simulation results showed that the minimum residual turbidity of 1.97 NTU and optical density of 0.16 (initial 0.89) can be achieved at dosages of 2.5 and 8.75â¯mgâ¯L-1, respectively, which were superior to conventional organics flocculants. Mechanistic studies suggested that the excellent adsorption property, and large numbers of quaternary ammonium and amino groups of nanoflocculants contributed to the superior flocculation and antibacterial performance of CPAM-g-NCS.
Assuntos
Anti-Infecciosos/química , Anti-Infecciosos/farmacologia , Nanoestruturas/química , Purificação da Água/métodos , Acrilamida/química , Varredura Diferencial de Calorimetria , Quitosana/química , Floculação , Espectroscopia de Ressonância Magnética , Metacrilatos/química , Microscopia Eletrônica de Varredura , Polimerização , Salmonella typhimurium/efeitos dos fármacos , Espectroscopia de Infravermelho com Transformada de Fourier , Suspensões , Termogravimetria , Microbiologia da ÁguaRESUMO
CH4 flux measured by a portable chamber using an infrared analyzer was compared with the flux by static chamber measurement for CW at 13 different sites from May 2012 to May 2017 in the Living Water Garden (LWG) in Chengdu, Sichuan Province, China, over 4 timescales (daily, monthly, seasonal, and annual). During the measurement period, a total of 1443 data were collected. CH4 fluxes were measured using the portable chamber method and the results showed that the annual mean and median CH4 flux values in the LWG were 17.4 mg m-2 h-1 and 6.2 mg m-2 h-1, respectively, ranging from - 19.7 to 98.0 mg m-2 h-1. Cumulative CH4 emissions for LWG ranged from - 0.17 to 0.86 kg m-2 year-1. Global warming potential (GWP, 25.7 kg CO2eq m-2 year-1) was at a high level, which means that the LWG was a source of CH4 emissions. Significant temporal variations on the 4 timescales were observed. And the asymmetry of measurement uncertainty of CH4 flux increases with the timescale. Although the total mean CH4 flux measured by the portable chamber method was 42.1% lower than that of the static chamber method, the temporal variation trends of CH4 flux were similar. The uncertainty of CH4 flux measured in portable chamber was more symmetrical than that in static chamber. These results suggest that the portable chamber method has considerable value as a long-term measurement method for CH4 flux temporal variations.
Assuntos
Metano/análise , Água , Dióxido de Carbono/análise , China , Cidades , Jardins , Óxido Nitroso/análise , Estações do AnoRESUMO
Green roof (GF) as an important role of urban ecosystem services is more and more focused on carbon sequestration for the mitigation of climate change, which there is still a gap of longer period of investigation on carbon sequestration on GF. This work aims to quantify the carbon sequestration on green roofs from 2012 to 2017 by measuring and calculating parameter on substrate organic carbon and plant organic carbon, when using waste building material substrate (WBMS) as GF substrate for the recycling of waste solid. Green roof group 2 (waste building material substrate (WBMS) as substrate) and green roof group 1 (local natural soil (LNS) as substrate), planting same three native plants (N. auriculata, L. spicata, and L. vicaryi), were both three substrate depth of 20 cm, 25 cm, and 30 cm, respectively. Results show that both innovative WBMS and LNS were a great capability of carbon sequestration and carbon storage on green roofs. Carbon storage of green roof group 1 and green roof group 2 was 65.6 kg C m-2 and 72.6 kg C m-2, respectively. Annual mean carbon sequestration of the WBMS was 1.8 times higher than LNS. The overall average carbon sequestration (12.8 kg C m-2 year-1) in green roof group 2 using WBMS was 1.1 times than corresponding in green roof group 1 (11.4 kg C m-2 year-1 using LNS). WBMS substrate and L. vicaryi could be considered as the most adaptable green roof configuration, which can be a recommendation to promote the carbon sequestration and the function of green roof for the better urban ecosystem services. Future work may focus on the GF carbon model, water interface, long-term monitoring, environmental impact, water quality and quantity, synthesized effect on GF ecosystem, low impact development (LID), management and simulation, and combination on intelligent urban system, based on LCA.
Assuntos
Carbono , Ecossistema , Conservação dos Recursos Naturais , Materiais de Construção , Reciclagem , SoloRESUMO
It is very important to control methane emissions to mitigate global warming. An intermittent micro-aeration control system was used to control methane emissions from an integrated vertical-flow constructed wetland (IVCW) to treat agricultural domestic wastewater pollution in this study. The optimized intermittent micro-aeration conditions were a 20-min aeration time and 340-min non-aeration time, 3.9 m3 h-1 aeration intensity, evenly distributed micro-aeration diffusers at the tank bottom, and an aeration period of every 6 h. Methane flux emission by intermittent micro-aeration was decreased by 60.7% under the optimized conditions. The average oxygen transfer efficiency was 26.73%. The control of CH4 emission from IVCWs was most strongly influenced by the intermittent micro-aeration diffuser distribution, followed by aeration intensity, aeration time, and water depth. Scaling up of IVCWs is feasible in rural areas by using intermittent micro-aeration control as a mitigation measure for methane gas emissions for climate change.
Assuntos
Gases de Efeito Estufa , Metano , Eliminação de Resíduos Líquidos/métodos , Áreas Alagadas , Agricultura , China , Mudança Climática , Oxigênio , Eliminação de Resíduos Líquidos/instrumentação , Águas Residuárias/químicaRESUMO
To demonstrate the resistance of antibiotics and disinfectants to Escherichia coli isolates, 255 E. coli strains were isolated from 328 retail meat samples in this study. Susceptibility testing results showed that 85.5% isolates were resistant to at least one antibiotic drug. The E. coli isolates showed the highest resistance to sulfamethoxazole (61.6%), followed by tetracycline (61.2%), ampicillin (48.2%), cefalotin (29.8%), and kanamycin (22.4%). The minimum inhibitory concentrations of the disinfectants cetyltrimethylammonium bromide, N,N-didecyl-N,N-dimethylammonium chloride, cetyltrimethylammonium bromide, and cetylpyridinium chloride for E. coli were 16-1,024, 4-1,024, 16-512, and 8-512 mg/L, respectively. The emrE, ydgE/ydgF, mdfA, and sugE(c) genes were commonly present (53.7-83.1%), but the qac and sugE(p) genes were less prevalent (0.0-14.9%). The qac genes were highly associated with antimicrobial resistance. Conjugative transfer experiment indicated that the disinfectant resistance genes, qacF, sugE(p), and qacEΔ1, were located on conjugative plasmids. Pulsed-field gel electrophoresis revealed that the antimicrobial-resistant isolates were associated with the sampling supermarkets or groceries. This study indicated that using quaternary ammonium compounds to decontaminate food processing environments may be ineffective and even provide a selective pressure for strains with acquired resistance to other antimicrobials.