n-Si/SiOx /CoOx -Mo Photoanode for Efficient Photoelectrochemical Water Oxidation.

Green hydrogen is considered to be the key for solving the emerging energy and environmental issues. The photoelectrochemical (PEC) process for the production of green hydrogen has been widely investigated because solar power is clean and renewable. However, mass production in this way is still far away from reality. Here, a Si photoanode is reported with CoOx as co-catalyst for efficient water oxidation. It is found that a high photovoltage of 350 mV can be achieved in 1.0 m K3 BO3 . Importantly, the photovoltage can be further increased to 650 mV and the fill factor of 0.62 is obtained in 1.0 m K3 BO3 by incorporating Mo into CoOx . The Mo-incorporated photoanode is also highly stable. It is shown that the incorporation of Mo can reduce the particle size of co-catalyst on the Si surface, improve the particle-distribution uniformity, and increase the density of particles, which can effectively enhance the light absorption and the electrochemical active surface area. Importantly, the Mo-incorporation results in high energy barrier in the heterojunction. All of these factors are attributed to improved the PEC performance. These findings may provide new strategies to maximize the solar-to-fuel efficiency by tuning the co-catalysts on the Si surface.

Advances in Spin Catalysts for Oxygen Evolution and Reduction Reactions.

Searching for high effective catalysts has been an endless effort to improve the efficiency of green energy harvesting and degradation of pollutants. In the past decades, tremendous strategies are explored to achieve high effective catalysts, and various theoretical understandings are proposed for the improved activity. As the catalytic reaction occurs at the surface or edge, the unsaturated ions may lead to the fluctuation of spin. Meanwhile, transition metals in catalysts have diverse spin states and may yield the spin effects. Therefore, the role of spin or magnetic moment should be carefully examined. In this review, the recent development of spin catalysts is discussed to give an insightful view on the origins for the improved catalytic activity. First, a brief introduction on the applications and advances in spin-related catalytic phenomena, is given, and then the fundamental principles of spin catalysts and magnetic fields-radical reactions are introduced in the second part. The spin-related catalytic performance reported in oxygen evolution/reduction reaction (OER/ORR) is systematically discussed in the third part, and general rules are summarized accordingly. Finally, the challenges and perspectives are given. This review may provide an insightful understanding of the microscopic mechanisms of catalytic phenomena and guide the design of spin-related catalysts.

Efficient Hydrogen Evolution on Cu Nanodots-Decorated Ni3S2 Nanotubes by Optimizing Atomic Hydrogen Adsorption and Desorption.

Low-cost transition-metal dichalcogenides (MS2) have attracted great interest as alternative catalysts for hydrogen evolution. However, a significant challenge is the formation of sulfur-hydrogen bonds on MS2 (S-Hads), which will severely suppress hydrogen evolution reaction (HER). Here we report Cu nanodots (NDs)-decorated Ni3S2 nanotubes (NTs) supported on carbon fibers (CFs) (Cu NDs/Ni3S2 NTs-CFs) as efficient electrocatalysts for HER in alkaline media. The electronic interactions between Cu and Ni3S2 result in Cu NDs that are positively charged and can promote water adsorption and activation. Meanwhile, Ni3S2 NTs are negatively charged and can weaken S-Hads bonds formed on catalyst surfaces. Therefore, the Cu/Ni3S2 hybrids can optimize H adsorption and desorption on electrocatalysts and can promote both Volmer and Heyrovsky steps of HER. The strong interactions between Cu and Ni3S2 cause the Cu NDs/Ni3S2 NTs-CFs electrocatalysts to exhibit the outstanding HER catalytic performance with low onset potential, high catalytic activity, and excellent stability.

Pt-like Hydrogen Evolution Electrocatalysis on PANI/CoP Hybrid Nanowires by Weakening the Shackles of Hydrogen Ions on the Surfaces of Catalysts.

The search for high active, stable, and cost-efficient hydrogen evolution reaction (HER) electrocatalysts for water electrolysis has attracted great interest. The coordinated water molecules in the hydronium ions will obviously reduce the positive charge density of H+ and hamper the ability of H+ to receive electrons from the cathode, leading to large overpotential of HER on nonprecious metal catalysts. Here we realize Pt-like hydrogen evolution electrocatalysis on polyaniline (PANI) nanodots (NDs)-decorated CoP hybrid nanowires (HNWs) supported on carbon fibers (CFs) (PANI/CoP HNWs-CFs) as PANI can effectively capture H+ from hydronium ions to form protonated amine groups that have higher positive charge density than those of hydronium ions and can be electro-reduced easily. The PANI/CoP HNWs-CFs as low-cost electrocatalysts show excellent catalytic performance toward HER in acidic solution, such as super high catalytic activity, small Tafel slope, and superior stability.

Activating CoOOH Porous Nanosheet Arrays by Partial Iron Substitution for Efficient Oxygen Evolution Reaction.

Iron-substituted CoOOH porous nanosheet arrays grown on carbon fiber cloth (denoted as Fex Co1-x OOH PNSAs/CFC, 0≤x≤0.33) with 3D hierarchical structures are synthesized by in situ anodic oxidation of α-Co(OH)2 NSAs/CFC in solution of 0.01 m (NH4 )2 Fe(SO4 )2 . X-ray absorption fine spectra (XAFS) demonstrate that CoO6 octahedral structure in CoOOH can be partially substituted by FeO6 octahedrons during the transformation from α-Co(OH)2 to Fex Co1-x OOH, and this is confirmed for the first time in this study. The content of Fe in Fex Co1-x OOH, no more than 1/3 of Co, can be controlled by adjusting the in situ anodic oxidation time. Fe0.33 Co0.67 OOH PNSAs/CFC shows superior OER electrocatalytic performance, with a low overpotential of 266 mV at 10 mA cm-2 , small Tafel slope of 30 mV dec-1 , and high durability.

Efficient Hydrogen Evolution Electrocatalysis Using Cobalt Nanotubes Decorated with Titanium Dioxide Nanodots.

TiO2 Co nanotubes decorated with nanodots (TiO2 NDs/Co NSNTs-CFs) are reported as high-performance earth-abundant electrocatalysts for the hydrogen evolution reaction (HER) in alkaline solution. TiO2 NDs/Co NSNTs can promote water adsorption and optimize the free energy of hydrogen adsorption. More importantly, the absorbed water can be easily activated in the presence of the TiO2 -Co hybrid structure. These advantages will significantly promote HER. TiO2 NDs/Co NSNTs-CFs as electrocatalysts show a high catalytic performance towards HER in alkaline solution. This study will open up a new avenue for designing and fabricating low-cost high-performance HER catalysts.

Silica-Polypyrrole Hybrids as High-Performance Metal-Free Electrocatalysts for the Hydrogen Evolution Reaction in Neutral Media.

Constructing inorganic-organic hybrids with superior properties in terms of water adsorption and activation will lead to catalysts with significantly enhanced electrocatalytic activity in the hydrogen evolution reaction (HER) in environmentally benign neutral media. Herein, we report SiO2 -polypyrrole (PPy) hybrid nanotubes supported on carbon fibers (CFs) (SiO2 /PPy NTs-CFs) as inexpensive and high-performance electrocatalysts for the HER in neutral media. Because of the strong electronic interactions between SiO2 and PPy, the SiO2 uniquely serves as the centers for water adsorption and activation, and accordingly promotes the HER. The metal-free SiO2 /PPy NTs-CFs displayed high catalytic activity in the HER in neutral media, such as a low onset potential and small Tafel slope, as well as excellent long-term durability.

FeOOH/Co/FeOOH Hybrid Nanotube Arrays as High-Performance Electrocatalysts for the Oxygen Evolution Reaction.

Herein, we developed FeOOH/Co/FeOOH hybrid nanotube arrays (HNTAs) supported on Ni foams for oxygen evolution reaction (OER). The inner Co metal cores serve as highly conductive layers to provide reliable electronic transmission, and can overcome the poor electrical conductivity of FeOOH efficiently. DFT calculations demonstrate the strong electronic interactions between Co and FeOOH in the FeOOH/Co/FeOOH HNTAs, and the hybrid structure can lower the energy barriers of intermediates and thus promote the catalytic reactions. The FeOOH/Co/FeOOH HNTAs exhibit high electrocatalytic performance for OER, such as low onset potential, small Tafel slope, and excellent long-term durability, and they are promising electrocatalysts for OER in alkaline solution.

Triggering efficient reconstructions of Co/Fe dual-metal incorporated Ni hydroxide by phosphate additives for electrochemical hydrogen and oxygen evolutions.

Alkaline electrochemical water splitting has been considered as an efficient way for the green hydrogen production in industry, where the electrocatalysts play the critical role for the electricity-to-fuel conversion efficiency. Phosphate salts are widely used as additives in the fabrication of electrocatalysts with improved activity, but their roles on the electrocatalytic performance have not been fully understood. Herein, we fabricate Co, Fe dual-metal incorporated Ni hydroxide on Ni foam using NaH2PO4 ((Co, Fe)NiOxHy-pi) and NaH2PO2 ((Co, Fe)NiOxHy-hp) as additive, respectively. We find that (Co, Fe)NiOxHy-hp with NaH2PO2 in the fabrication shows high activity and stability for both HER and OER (a overpotential of -0.629 V and 0.65 V at 400 mA cm-2 for HER and OER, respectively). Further experiment reveals that the reconstructed structures of electrocatalyst by using NaH2PO2 (hp) endow high electrocatalytic performances: (1) in-situ generated active metal improves the accumulation, transportation and activity of hydrogen species in the HER process; and (2) in-situ generated poor-crystalline hydroxide endows superior charge/mass transportation and kinetics improvements in the OER process. Our study may provide an insightful understanding on the catalytic performance of non-precious metal electrocatalysts by controlling additives and guidance for the design and synthesis of novel electrocatalysts.

Co3X8 (X = Cl and Br): multiple phases and magnetic properties of the Kagome lattice.

The unique magnetic properties of two-dimensional (2D) materials have demonstrated huge potential for applications in nanodevices and spintronics. In this work, we propose a new Kagome lattice, Co3X8 (X = Cl and Br), based on density functional theory (DFT) calculation. We find that Co/X in Co3X8 has spontaneous movement in the lattice, resulting in 156- and 12-phases of Co3X8 and diverse magnetic and electronic properties. We show that the magnetic and electronic properties of Co3X8 can be engineered by strain, and the magnetic properties of Co3X8 are highly related to the spontaneous movement of X. Moreover, the transmission property of 12-Co3X8 shows clear angle-dependent features due to the symmetry breaking as caused by the spontaneous movement of X. Our findings may provide not only a possible Kagome lattice with unique properties, but also a strategy for designing nanodevices and for spintronics.

Industrial-Si-based photoanode for highly efficient and stable water splitting.

Photoelectrochemical (PEC) water splitting is an effective and sustainable method for solar energy harvesting. However, the technology is still far away from practical application because of the high cost and low efficiency. Here, we report a low-cost, stable and high-performing industrial-Si-based photoanode (n-Indus-Si/Co-2mA-xs) that is fabricated by simple electrodeposition. Systematic characterizations such as scanning electron microscopy, X-ray photoelectron spectroscopy have been employed to characterize and understand the working mechanisms of this photoanode. The uniform and adherent dispersion of co-catalyst particles result in high built-in electric field, reduced charge transfer resistance, and abundant active sites. The core-shell structure of co-catalyst particles is formed after the activation process. The reconstructed morphology and modified chemical states of the surface co-catalyst particles improve the separation and transfer of charges, and the reaction kinetics for water oxidation greatly. Our work demonstrates that large-scale PEC water splitting can be achieved by engineering the industrial-Si-based photoelectrode, which shall guide the development of solar energy conversion in the industry.

Design of Pd/PANI/Pd sandwich-structured nanotube array catalysts with special shape effects and synergistic effects for ethanol electrooxidation.

Low cost, high activity, and long-term durability are the main requirements for commercializing fuel cell electrocatalysts. Despite tremendous efforts, developing non-Pt anode electrocatalysts with high activity and long-term durability at low cost remains a significant technical challenge. Here we report a new type of hybrid Pd/PANI/Pd sandwich-structured nanotube array (SNTA) to exploit shape effects and synergistic effects of Pd-PANI composites for the oxidation of small organic molecules for direct alcohol fuel cells. These synthesized Pd/PANI/Pd SNTAs exhibit significantly improved electrocatalytic activity and durability compared with Pd NTAs and commercial Pd/C catalysts. The unique SNTAs provide fast transport and short diffusion paths for electroactive species and high utilization rate of catalysts. Besides the merits of nanotube arrays, the improved electrocatalytic activity and durability are especially attributed to the special Pd/PANI/Pd sandwich-like nanostructures, which results in electron delocalization between Pd d orbitals and PANI π-conjugated ligands and in electron transfer from Pd to PANI.

Facile formation of Zn-incorporated NiFe layered double hydroxide as highly-efficient oxygen evolution catalyst.

Electrochemical water splitting is the primary method to produce green hydrogen, which is considered an efficient alternative to fossil fuels for achieving carbon neutrality. For meeting the increasing market demand for green hydrogen, high-efficiency, low-cost, and large-scale electrocatalysts are crucial. In this study, we report a simple spontaneous corrosion and cyclic voltammetry (CV) activation method to fabricate Zn-incorporated NiFe layered double hydroxide (LDH) on commercial NiFe foam, which shows excellent oxygen evolution reaction (OER) performance. The electrocatalyst achieves an overpotential of 565 mV and outstanding stability of up to 112 h at 400 mA cm-2. The active layer for OER is shown to be ß-NiFeOOH according to the results of in-situ Raman. Our findings suggest that the NiFe foam treated by simple spontaneous corrosion has promising industrial applications as a highly efficient OER catalyst.

Facile and Stable CuInO2 Nanoparticles for Efficient Electrochemical CO2 Reduction.

Searching for electrocatalysts for the electrochemical CO2 reduction reaction (e-CO2RR) with high selectivity and stability remains a significant challenge. In this study, we design a Cu-CuInO2 composite with stable states of Cu0/Cu+ by electrochemically depositing indium onto CuCl-decorated Cu foil. The catalyst displays superior selectivity toward the CO product, with a maximal Faraday efficiency of 89% at -0.9 V vs the reversible hydrogen electrode, and maintains impressive stability up to 27 h with a retention rate of >76% in Faraday efficiency. Our systematical characterizations reveal that the catalyst's high performance is attributed to CuInO2 nanoparticles. First-principles calculations further confirm that CuInO2(012) is more conducive to CO generation than Cu(111) under applied potential and presents a higher energy barrier than Cu(111) for the hydrogen evolution reaction. These theoretical predictions are consistent with our experimental observations, suggesting that CuInO2 nanoparticles offer a facile catalyst with a high selectivity and stability for e-CO2RR.