COVID-19 social distancing compliance mechanisms: UK evidence.

Non-compliance with social distancing (SD) measures clearly has negative effects on both public health and post-pandemic economic recovery. However, little is as yet known about people's views on and factors influencing their behavioral intentions toward SD measures. This study draws on moral disengagement theory and the norm-activation model to investigate mechanisms that promote or hinder compliance with SD measures. A longitudinal research approach was adopted to compare changes in the main factors over three periods of the COVID-19 pandemic in England (UK). The results reveal significant differences between the three periods regarding intentions to comply with SD measures, altruistic value, moral obligation and moral disengagement, with no significant change in ascription of responsibility. Residents showed the strongest intentions to comply with SD measures during the first national lockdown, with the highest moral obligation and lowest moral disengagement levels, compared with the lowest intention to comply during the first re-opening period. Altruistic value is important in promoting moral obligation and compliance with SD measures, whereas the predictive powers of ascription of responsibility and moral disengagement were weaker than expected. These findings offer guidance to policymakers and researchers in developing more effective policies and public communication strategies. The results suggest that communication is key to normalizing SD compliance, which can be achieved most effectively by fostering residents' altruistic value and moral considerations. Particular attention must be paid to re-opening periods between lockdowns, with clear messages to remind residents of prosocial aspects of SD compliance and public health. In addition to appropriate communication and education, technologies such as apps, QR codes and contactless shopping settings may also be used to facilitate compliance with SD measures.

Seed size, number and strategies in annual plants: a comparative functional analysis and synthesis.

BACKGROUND AND AIMS: Plants depend fundamentally on establishment from seed. However, protocols in trait-based ecology currently estimate seed size but not seed number. This can be rectified. For annuals, seed number should simply be a positive function of vegetative biomass and a negative function of seed size. METHODS: Using published values of comparative seed number as the 'gold standard' and a large functional database, comparative seed yield and number per plant and per m2 were predicted by multiple regression. Subsequently, ecological variation in each was explored for English and Spanish habitats, newly calculated C-S-R strategies and changed abundance in the British flora. KEY RESULTS: As predicted, comparative seed mass yield per plant was consistently a positive function of plant size and competitive ability, and largely independent of seed size. Regressions estimating comparative seed number included, additionally, seed size as a negative function. Relationships differed numerically between regions, habitats and C-S-R strategies. Moreover, some species differed in life history over their geographical range. Comparative seed yield per m2 was positively correlated with FAO crop yield, and increasing British annuals produced numerous seeds. Nevertheless, predicted values must be viewed as comparative rather than absolute: they varied according to the 'gold standard' predictor used. Moreover, regressions estimating comparative seed yield per m2 achieved low precision. CONCLUSIONS: For the first time, estimates of comparative seed yield and number for >800 annuals and their predictor equations have been produced and the ecological importance of these regenerative traits has been illustrated. 'Regenerative trait-based ecology' remains in its infancy, with work needed on determinate vs. indeterminate flowering ('bet-hedging'), C-S-R methodologies, phylogeny, comparative seed yield per m2 and changing life history. Nevertheless, this has been a positive start and readers are invited to use estimates for >800 annuals, in the Supplementary data, to help advance 'regenerative trait-based ecology' to the next level.

Bioproduction of 2-phenylethanol and 2-phenethyl acetate by Kluyveromyces marxianus through the solid-state fermentation of sugarcane bagasse.

2-Phenylethanol (2-PE) and 2-phenethyl acetate (2-PEA) are important aroma compounds widely used in food and cosmetic industries due to their rose-like odor. Nowadays, due to the growing demand for natural products, the development of bioprocesses for obtaining value-added compounds has become of great significance. 2-PE and 2-PEA can be produced through the biotransformation of L-phenylalanine using the generally recognized as safe strain Kluyveromyces marxianus. L-phenylalanine bioconversion systems have been typically focused on submerged fermentation processes (SmF), but there is no information about other alternative productive approaches. Here, the solid-state fermentation (SSF) of sugarcane bagasse supplemented with L-phenylalanine was investigated as a sustainable alternative for producing 2-PE and 2-PEA in a residue-based system using Kluyveromyces marxianus as inoculum. An initial screening of the operational variables indicated that air supply, temperature, and initial moisture content significantly affect the product yield. Besides, it was found that the feeding strategy also affects the production and the efficiency of the process. While a basic batch system produced 16 mgproducts per gram of residue (dry basis), by using split feeding strategies (fed-batch) of only sugarcane bagasse, a maximum of 18.4 mgProducts g-1residue were achieved. Increase in product yield was also accompanied by an increase in the consumption efficiency of nutrients and precursor. The suggested system results as effective as other more complex SmF systems to obtain 2-PE and 2-PEA, showing the feasibility of SSF as an alternative for producing these compounds through the valorization of an agro-industrial residue.

Bioprocesses for 2-phenylethanol and 2-phenylethyl acetate production: current state and perspectives.

2-Phenylethanol (2-PE) and 2-phenethyl acetate (2-PEA) are valuable generally recognized as safe flavoring agents widely used in industry. Perfumes, pharmaceuticals, polishes, and personal care products, are some of the final products using these compounds as additives due to their rose-like odor. Also, 2-PE is used in disinfectants, pest control, and cleaning products due to its biocide capability. Although most of these additives production are derived from chemical synthesis, the current trend of consumers to prefer natural products has contributed to the development of biotechnological approaches as an alternative way to obtain natural 2-PE and 2-PEA. The most efficient route to bioproduce these compounds is through the bioconversion of L-phenylalanine via the Ehrlich pathway, and most of the advances have been focused on the development of this process. This review compiles the most recent developments in the biotechnological production of 2-PE and 2-PEA, indicating the most studied strains producing 2-PE and 2-PEA, the current advances in the in situ product recovery in liquid systems, an overview of the strain developments, and the progress in the use of residue-based systems. Future research should address the need for more sustainable and economic systems such as those using wastes as raw materials, as well as the scale-up of the proposed technologies.

Trade-offs between seed and leaf size (seed-phytomer-leaf theory): functional glue linking regenerative with life history strategies and taxonomy with ecology?

Background and Aims: While the 'worldwide leaf economics spectrum' (Wright IJ, Reich PB, Westoby M, et al. 2004. The worldwide leaf economics spectrum. Nature : 821-827) defines mineral nutrient relationships in plants, no unifying functional consensus links size attributes. Here, the focus is upon leaf size, a much-studied plant trait that scales positively with habitat quality and components of plant size. The objective is to show that this wide range of relationships is explicable in terms of a seed-phytomer-leaf (SPL) theoretical model defining leaf size in terms of trade-offs involving the size, growth rate and number of the building blocks (phytomers) of which the young shoot is constructed. Methods: Functional data for 2400+ species and English and Spanish vegetation surveys were used to explore interrelationships between leaf area, leaf width, canopy height, seed mass and leaf dry matter content (LDMC). Key Results: Leaf area was a consistent function of canopy height, LDMC and seed mass. Additionally, size traits are partially uncoupled. First, broad laminas help confer competitive exclusion while morphologically large leaves can, through dissection, be functionally small. Secondly, leaf size scales positively with plant size but many of the largest-leaved species are of medium height with basally supported leaves. Thirdly, photosynthetic stems may represent a functionally viable alternative to 'small seeds + large leaves' in disturbed, fertile habitats and 'large seeds + small leaves' in infertile ones. Conclusions: Although key elements defining the juvenile growth phase remain unmeasured, our results broadly support SPL theory in that phytometer and leaf size are a product of the size of the initial shoot meristem (≅ seed mass) and the duration and quality of juvenile growth. These allometrically constrained traits combine to confer ecological specialization on individual species. Equally, they appear conservatively expressed within major taxa. Thus, 'evolutionary canalization' sensu Stebbins (Stebbins GL. 1974. Flowering plants: evolution above the species level . Cambridge, MA: Belknap Press) is perhaps associated with both seed and leaf development, and major taxa appear routinely specialized with respect to ecologically important size-related traits.

Impact of Chiral Bioanalytical Methods on the Bioequivalence of Ibuprofen Products Containing Ibuprofen Lysinate and Ibuprofen Base.

The purpose was to assess the impact of the use of a chiral bioanalytical method on the conclusions of a bioequivalence study that compared two ibuprofen suspensions with different rates of absorption. A comparison of the conclusion of bioequivalence between a chiral method and an achiral approach was made. Plasma concentrations of R-ibuprofen and S-ibuprofen were determined using a chiral bioanalytical method; bioequivalence was tested for R-ibuprofen and for S-ibuprofen separately and for the sum of both enantiomers as an approach for an achiral bioanalytical method. The 90% confidence interval (90% CI) that would have been obtained with an achiral bioanalytical method (90% CI: Cmax: 117.69-134.46; AUC0 (t) : 104.75-114.45) would have precluded the conclusion of bioequivalence. This conclusion cannot be generalized to the active enantiomer (90% CI: Cmax : 103.36-118.38; AUC0 (t) : 96.52-103.12), for which bioequivalence can be concluded, and/or the distomer (90% CI: Cmax : 132.97-151.33; AUC0 (t) : 115.91-135.77) for which a larger difference was observed. Chiral bioanalytical methods should be required when 1) the enantiomers exhibit different pharmacodynamics and 2) the exposure (AUC or Cmax ) ratio of enantiomers is modified by a difference in the rate of absorption. Furthermore, the bioequivalence conclusion should be based on all enantiomers, since the distomer(s) might not be completely inert, in contrast to what is required in the current regulatory guidelines. In those cases where it is unknown if the ratio between enantiomers is modified by changing the rate of absorption, chiral bioanalytical methods should be employed unless enantiomers exhibit the same pharmacodynamics. Chirality 28:429-433, 2016. © 2016 Wiley Periodicals, Inc.

Ibuprofen lysinate, quicker and less variable: relative bioavailability compared to ibuprofen base in a pediatric suspension dosage form.

OBJECTIVES: To assess and compare the bioavailability of ibuprofen enantiomers (R and S) of two different pediatric suspensions: the first one with ibuprofen lysinate (Algidrin® Pediátrico, FARDI S.A., Barcelona, Spain) and the second one with ibuprofen base (Dalsy®, Abbott Laboratories S.A., Madrid, Spain). METHODS: A randomized, open-label, single-dose, balanced, crossover study under fasting conditions was performed at the CIM-Sant Pau. 24 healthy volunteers received a single dose of ibuprofen lysinate (Algidrin® Pediátrico, FARDI S.A.) and ibuprofen base (Dalsy®, Abbott Laboratories S.A.) equivalent to 400 mg of ibuprofen. 18 blood samples were drawn and ibuprofen enantiomer plasma concentrations were determined using an enantioselective analytical method. An analysis of variance (ANOVA) model was used, and the 90% confidence intervals (CI) were calculated; further analyses were made regarding rate of absorption and variability. RESULTS: The pharmacokinetic parameters (Algidrin® Pediátrico vs. Dalsy® (Mean±SD)) were: S-enantiomer: Cmax=22.39±5.33 vs. 19.97±3.19 µg/mL; AUC0t=74.83±16.69 vs. 74.64±14.80 µg×h/mL, and AUC0∞=77.46±19.33 vs. 76.98±17.13 µg×h/mL; and for R-enantiomer: Cmax=21.74±3.76 vs. 15.20±2.03 µg/mL; AUC0t=57.55±10.17 vs. 46.13±9.61 µg×h/mL, and AUC0∞ value was 58.49±10.57 vs. 47.03±10.02 µg×h/mL. The tmax (Median) for S-enantiomer (active) were: 0.5 vs. 1.33 hours (p=0.001) and for R-enantiomer: 0.5 vs. 1.0 hours (p=0.004). Ibuprofen pharmacokinetic values may vary under fed state and in pediatric population. CONCLUSIONS: While S-ibuprofen shows a similar bioavailability for AUC0t, AUC0∞, and Cmax, R-ibuprofen shows suprabioavailability for the lysinate formulation. The rate of absorption of the ibuprofen lysinate suspension is quicker and less variable than that of the ibuprofen base reference suspension and it exhibits a shorter tmax, which is of particular interest for achieving a rapid and homogeneous analgesic and antipyretic effect.

Programmed iron oxide nanoparticles disintegration in anaerobic digesters boosts biogas production.

A novel concept of dosing iron ions using Fe3O4 engineered nanoparticles is used to improve biogas production in anaerobic digestion processes. Since small nanoparticles are unstable, they can be designed to provide ions in a controlled manner, and the highest ever reported improvement of biogas production is obtained. The nanoparticles evolution during operation is followed by an array of spectroscopic techniques.

Screening of alternative nitrogen sources for sophorolipid production through submerged fermentation using Starmerella bombicola.

To explore a sustainable sophorolipid production, several hydrolysates from agricultural byproducts, such as wheat feed, rapeseed meal, coconut waste and palm waste were used as nitrogen sources. The four hydrolysates overperformed the controls after 168 h of fermentation using Starmerella bombicola ATCC 22214. Wheat feed and coconut waste hydrolysates were the most promising feedstocks presenting a linear relationship between yeast growth and diacetylated lactonic C18:1 production at total nitrogen concentrations below 1.5 g/L (R2 = 0.90 and 0.83, respectively). At 0.31 g/L total nitrogen, wheat feed hydrolysate achieved the highest production, yielding 72.20 ± 1.53 g/L of sophorolipid crude extract and 60.05 ± 0.56 g/L of diacetylated lactonic C18:1 at shake flask scale with productivities of 0.43 and 0.36 g/L/h, respectively. Results were confirmed in a 2-L bioreactor increasing 15 % diacetylated lactonic C18:1 production. Moreover, wheat feed hydrolysate supplemented only with a hydrophobic carbon source was able to produce mainly diacetylated lactonic C18:1 congener (88.5 % wt.), suggesting that the composition of the hydrolysate significantly influences the congeners profile. Overall, this study provides valuable insights into agricultural byproduct hydrolysates as potential nitrogen feedstocks for sophorolipid production and their further application on industrial biotechnology.

Long-term performance and activity study of a two-stage anaerobic EGSB reactors system treating complex and toxic industrial wastewater.

Anaerobic treatment of industrial wastewater using upflow anaerobic reactors is an extended trend due to its high efficiency and biogas production potential, but its implementation in some sectors is limited due to the complexity and toxicity of the wastewaters. In this study, a two-stage expanded granular sludge bed (EGSB) reactors system has been investigated at both bench and pilot scale for the treatment of complex and toxic real wastewater from a petrochemical industry. The effect of different operational parameters including organic loading rate (OLR), hydraulic retention time (HRT) and influent characteristics over COD removal and biogas production and composition have been studied. Additionally, biomass specific methanogenic activity (SMA) and wastewater toxicity have been evaluated after long-term operation. Optimum total HRT of 24 h has been determined resulting in total COD and SO4 2- removal of 56.30 ± 5.25% and 31.68 ± 14.71%, respectively, at pilot scale, and average biogas production of 93.47 ± 34.92 NL/day with 67.01 ± 10.23 %CH4 content and 5210.11 ± 6802.27 ppmv of H2S. SMA and toxicity tests have confirmed inhibitory and toxic effects of wastewater over anaerobic biomass with average maximum inhibition of 65.34% in the unacclimated anaerobic inoculum while chronic toxicity produced a decrease of an order of magnitude in SMA after 600 days of operation. This study demonstrates the feasibility of applying an anaerobic treatment to this wastewater using EGSB reactors between a 0.97-1.74 gCOD/L/day OLR range. Nonetheless, periodic reinoculation would be necessary for long-term operation due to chronic toxicity of the wastewater exerted on the anaerobic biomass. PRACTITIONER POINTS: A two-stage EGSB reactors system has been operated at bench and pilot scale to treat complex and toxic petrochemical wastewater. Optimal total HRT of 24 h resulted in average COD removal ranging from 40% to 60%. SMA and toxicity tests have been performed to study long-term acclimation, detecting an activity depletion of an order of magnitude.

Using green waste as substrate to produce biostimulant and biopesticide products through solid-state fermentation.

Although the use of green waste as a substrate in different types of microbial bioprocessing has a major impact on improving green waste valorization, very little information has been provided on this issue. The purpose of this paper is to study the feasibility of using green waste to produce a biostimulant (Indole-3-acetic acid (IAA)) and biopesticide (conidial spore) through solid-state fermentation. Trichoderma harzianum was selected as the inoculum of the process and the green waste was a mixture of grass clippings and pruning waste. An experiment was designed to study the effect of tryptophan concentration, proportion of grass and pruning waste, and substrate moisture on IAA and spore production. The results show that washing and using phosphate buffer has a beneficial effect on green waste quality in terms of bioproduction. The maximum IAA and spore productions reported in the current study were 101.46 µg g-1 dry matter and 3.03 × 109 spore g-1 dry matter, respectively. According to the results, IAA production increases with a higher amount of tryptophan and grass. However, the number of spores increased with lower amounts of tryptophan and grass. The model suggested the following optimized parameters for the production of spores and IAA: tryptophan 0.45 %, grass 61 %, and moisture 74 %. The effect of fermentation time was also studied, and the results show that the maximum IAA and spore production was obtained on days 3 and 7, respectively.

Carbon and nitrogen optimization in solid-state fermentation for sustainable sophorolipid production using industrial waste.

The use of alternative feedstocks such as industrial or food waste is being explored for the sustainable production of sophorolipids (SLs). Microbial biosurfactants are mainly produced via submerged fermentation (SmF); however, solid-state fermentation (SSF) seems to be a promising alternative for using solid waste or byproducts that could not be exploited by SmF. Applying the advantages that SSF offers and with the aim of revalorizing industrial organic waste, the impact of carbon and nitrogen sources on the relationship between yeast growth and SL production was analyzed. The laboratory-scale system used winterization oil cake as the solid waste for a hydrophobic carbon source. Pure hydrophilic carbon (glucose) and nitrogen (urea) sources were used in a Box-Behnken statistical design of experiments at different ratios by applying the response surface methodology. Optimal conditions to maximize the production and productivity of diacetylated lactonic C18:1 were a glucose:nitrogen ratio of 181.7:1.43 (w w-1 based on the initial dry matter) at a fermentation time of 100 h, reaching 0.54 total gram of diacetylated lactonic C18:1 with a yield of 0.047 g per gram of initial dry mass. Moreover, time course fermentation under optimized conditions increased the SL crude extract and diacetylated lactonic C8:1 production by 22% and 30%, respectively, when compared to reference conditions. After optimization, industrial wastes were used to substitute pure substrates. Different industrial sludges, OFMSW hydrolysate, and sweet candy industry wastewater provided nitrogen, hydrophilic carbon, and micronutrients, respectively, allowing their use as alternative feedstocks. Sweet candy industry wastewater and cosmetic sludge are potential hydrophilic carbon and nitrogen sources, respectively, for sophorolipid production, achieving yields of approximately 70% when compared to the control group.

Recent Advances in the Catalytic Conversion of Methane to Methanol: From the Challenges of Traditional Catalysts to the Use of Nanomaterials and Metal-Organic Frameworks.

Methane and carbon dioxide are the main contributors to global warming, with the methane effect being 25 times more powerful than carbon dioxide. Although the sources of methane are diverse, it is a very volatile and explosive gas. One way to store the energy content of methane is through its conversion to methanol. Methanol is a liquid under ambient conditions, easy to transport, and, apart from its use as an energy source, it is a chemical platform that can serve as a starting material for the production of various higher-value products. Accordingly, the transformation of methane to methanol has been extensively studied in the literature, using traditional catalysts as different types of zeolites. However, in the last few years, a new generation of catalysts has emerged to carry out this transformation with higher conversion and selectivity, and more importantly, under mild temperature and pressure conditions. These new catalysts typically involve the use of a highly porous supporting material such as zeolite, or more recently, metal-organic frameworks (MOFs) and graphene, and metallic nanoparticles or a combination of different types of nanoparticles that are the core of the catalytic process. In this review, recent advances in the porous supports for nanoparticles used for methane oxidation to methanol under mild conditions are discussed.

Combining nanoscale zero-valent iron and anaerobic dechlorinating bacteria to degrade chlorinated methanes and 1,2-dichloroethane.

Nanoscale zero-valent iron (nZVI) has the potential to degrade a diversity of chlorinated compounds, and it is widely used for remediation of contaminated groundwaters. However, some frequently detected contaminants such as dichloromethane (DCM) and 1,2-dichloroethane (1,2-DCA) have shown nearly no reactivity with nZVI. Here, we tested the feasibility of combining anaerobic dechlorinating bacteria, Dehalobacterium and Dehalogenimonas, and nZVI as a treatment train to detoxify chlorinated methanes (i.e., chloroform-CF- and DCM), and 1,2-DCA. First, we showed that CF (500 µM) was fully degraded by 1 g/L nZVI to DCM as a major by-product, which was susceptible to fermentation by Dehalobacterium to innocuous products. Our results indicate that soluble compounds released by nZVI might cause an inhibitory impact on Dehalobacterium activity, avoiding DCM depletion. The DCM dechlorination activity was recovered when transferred to a fresh medium without nZVI. The increase in H2 production and pH was discarded as potential inhibitors. Similarly, a Dehalogenimonas-containing culture was unable to dichloroeliminate 1,2-DCA when exposed to 1 g/L nZVI, but dechlorinating activity was also recovered when transferred to nZVI-free media. The recovery of the dechlorinating activity of Dehalobacterium and Dehalogenimonas suggests that combination of nZVI and bioremediation techniques can be feasible under field conditions where dilution processes can alleviate the impact of the potential inhibitory soluble compounds.

Magnetite-based nanoparticles and nanocomposites for recovery of overloaded anaerobic digesters.

The effect of magnetite nanoparticles and nanocomposites (magnetite nanoparticles impregnated into graphene oxide) supplement on the recovery of overloaded laboratory batch anaerobic reactors was assessed using two types of starting inoculum: anaerobic granular sludge (GS) and flocculent sludge (FS). Both nanomaterials recovered methane production at a dose of 0.27 g/L within 40 days in GS. Four doses of magnetite nanoparticles from 0.075 to 1 g/L recovered the process in FS systems between 30 and 50 days relaying on the dose. The presence of nanomaterials helped to reverse the effect of volatile fatty acids inhibition and enabled microbial communities to recover but also favoured the development of certain microorganisms over others. In GS reactors, the methanogenic population changed from being mostly acetoclastic (Methanothrix soehngenii) to being dominated by hydrogenotrophic species (Methanobacterium beijingense). Nanomaterial amendment may serve as a preventative measure or provide an effective remedial solution for system recovery following overloading.

Preliminary study of phosphate adsorption onto cerium oxide nanoparticles for use in water purification; nanoparticles synthesis and characterization.

In this study, the synthesis and characterization of cerium oxide nanoparticles (CeO(2)-NPs) and their adsorption potential for removing phosphate from water was evaluated using a multi-factor experimental design to explore the effect of various factors on adsorption. The objective function selected was the percentage of phosphate removed from water, in which the phosphate concentration and the CeO(2)-NP concentration are quantitative variables (factors in the experimental design). A lineal polynomial fitted the experimental results well (R(2) = 0.9803). The nanostructure was studied by transmission electron microscopy (TEM) and high-resolution TEM techniques before and after the adsorption process. During the adsorption and desorption processes several changes in the morphology and surface chemistry of the CeO(2)-NPs were observed.

International air travel attitude and travel planning lead times across 45 countries in response to the COVID-19 pandemic.

This paper explores global differences in travel risk perception based on i) attitudes towards travel abroad, and ii) the time required to plan travel. Baseline data from 2019 is compared with data from 2020, the first year of the COVID-19 pandemic. A methodology based on Big Data is developed through the Skyscanner metasearch engine, working with 20,756 million flight searches and 1979 million flight picks worldwide. We conduct an exploratory analysis by region, followed by a cluster analysis of 45 countries. We argue that the findings respond to uncertainty avoidance, with clear differences between Europe, America and Asia-Pacific. This knowledge has marketing implications for tourist destinations in terms of what marketing messages to convey and the best time to introduce marketing campaigns for each country or group of countries, so that the opportunity for reactivation of tourism is maximised.

The impact of COVID-19 on European tourists' attitudes to air travel and the consequences for tourist destination evoked set formation.

We study how risk conditions derived from the COVID-19 pandemic may impact on both the desire to travel and intention to visit of tourists and, therefore, on different stages of the destination choice process. We analyse 5134 million flight searches and 379 million flight picks during 2020 for the 17 largest European tourism source markets. An unweighted index number is employed to measure the average variation for searches and picks, for the year 2020, in relation to the reference base period (year 2019). This is done for air travel in general and to Spain specifically. The study then proceeds to conduct an analysis of 17 international travel destinations that are in the evoked sets of the two largest outbound markets in Europe (Germany and UK). We also identify which markets are most favourable to Spain. The research design can inform cost-efficient marketing decisions in a situation of high uncertainty.

Microbial biosurfactants: a review of recent environmental applications.

Microbial biosurfactants are low-molecular-weight surface-active compounds of high industrial interest owing to their chemical properties and stability under several environmental conditions. The chemistry of a biosurfactant and its production cost are defined by the selection of the producer microorganism, type of substrate, and purification strategy. Recently, biosurfactants have been applied to solve or contribute to solving some environmental problems, with this being their main field of application. The most referenced studies are based on the bioremediation of contaminated soils with recalcitrant pollutants, such as hydrocarbons or heavy metals. In the case of heavy metals, biosurfactants function as chelating agents owing to their binding capacity. However, the mechanism by which biosurfactants typically act in an environmental field is focused on their ability to reduce the surface tension, thus facilitating the emulsification and solubilization of certain pollutants (in-situ biostimulation and/or bioaugmentation). Moreover, despite the low toxicity of biosurfactants, they can also act as biocidal agents at certain doses, mainly at higher concentrations than their critical micellar concentration. More recently, biosurfactant production using alternative substrates, such as several types of organic waste and solid-state fermentation, has increased its applicability and research interest in a circular economy context. In this review, the most recent research publications on the use of biosurfactants in environmental applications as an alternative to conventional chemical surfactants are summarized and analyzed. Novel strategies using biosurfactants as agricultural and biocidal agents are also presented in this paper.

Postglacial range expansion of high-elevation plants is restricted by dispersal ability and habitat specialization.

Aim: Species' ecological traits influence their spatial genetic patterns. Bedrock preference strongly shapes the phylogeography of alpine plants, but its interactions with other ecological traits have rarely been disentangled. Here, we explore whether dispersal ability and degree of habitat specialization account for divergent postglacial expansion patterns of high-elevation plants in spite of similar bedrock preference. Location: The Pyrenees, southwestern Europe. Taxon: Cirsium glabrum (Asteraceae), Salix pyrenaica (Salicaceae) and Silene borderei (Caryophyllaceae). Methods: Phylogenetic, genetic structure and demographic modelling analyses based on restriction-site-associated DNA sequencing (RADseq) data from a range-wide populational sampling were conducted. Occurrence data and environmental variables were used to construct species distribution models, which were projected under current and Last Glacial Maximum conditions, and were combined with RADseq data to reconstruct the postglacial history of the study species. The degree of habitat specialization of each species was estimated based on the plant communities within which they occur, and their climatic niche breadth. Results: Salix pyrenaica, which occupies a broad range of habitats, shows a high level of range filling, a blurred genetic structure and an admixture cline between the two main genetic groups, congruent with rapid postglacial expansion. The microsite specialists C. glabrum and S. borderei exhibit a strong genetic structure and low levels of range filling, indicative of slow postglacial expansion. The good disperser C. glabrum shows higher levels of admixture between genetic groups and weaker population differentiation than the poor disperser S. borderei. Main Conclusions: Factors other than bedrock preference have a strong impact on the postglacial range dynamics of high-elevation species. Habitat specialization plays an important role, allowing species occupying a broad range of habitats to more rapidly expand their ranges after environmental change. The effect of dispersal ability is lower than expected for the study species.