Influence of tube current and metal artifact reduction on the diagnosis of external cervical resorption in teeth adjacent to a dental implant in CBCT: an ex-vivo study.

OBJECTIVES: This ex-vivo study aimed to assess the influence of tube current (mA) and metal artifact reduction (MAR) on the diagnosis of early external cervical resorption (EECR) in cone-beam computed tomography (CBCT) in the presence of an adjacent dental implant. MATERIALS AND METHODS: Twenty-three single-rooted teeth were sectioned longitudinally and EECR was induced using a spherical drill and 5% nitric acid in 10 teeth. Each tooth was positioned in the socket of the lower right canine of a dry human mandible and CBCT scans were acquired using 90 kVp, voxel of 0.085 mm, field of view of 5 x 5 cm, and varying tube current (4, 8 or 12 mA), MAR (enabled or disabled) and implant conditions (with a zirconia implant in the socket of the lower right first premolar or without). Five oral radiologists evaluated the presence of EECR in a 5-point scale and the diagnostic values (area under the receiver operating characteristic curve - AUC, sensitivity, and specificity) were compared using multi-way Analysis of Variance (α = 0.05). Kappa test assessed intra-/inter-evaluator agreement. RESULTS: The tube current only influenced the AUC values in the presence of the implant and when MAR disabled; in this case, 8 mA showed lower values (p<0.007). MAR did not influence the diagnostic values (p>0.05). In general, the presence of an implant reduced the AUC values (p<0.0001); sensitivity values with 8 mA and MAR disabled, and specificity values with 4 mA and MAR enabled and 8 mA regardless MAR were also decreased (p<0.0001). CONCLUSIONS: Variations in tube current and MAR were unable to improve EECR detection, which was impaired by the presence of an adjacent implant. CLINICAL RELEVANCE: Increasing tube current or activating MAR tool does not improve EECR diagnosis, which is hampered by the artifacts generated by dental implants.

Is there a relationship between the presence of external root resorption in second molars adjacent to impacted mandibular third molars with awake bruxism and masticatory muscle activity?

OBJECTIVES: This study aimed to assess whether awake bruxism and masticatory muscle activity could be related to external root resorption (ERR) in second molars adjacent to impacted mandibular third molars. MATERIALS AND METHODS: Sixty patients, with requests for a cone-beam, computed tomography, were divided into two groups: ERR (patients with ERR in the second molar, n = 30), and control group (n = 30). Awake bruxism was assessed through the Oral Behaviors Checklist (OBC) and an ecological momentary assessment (EMA). Surface electromyography (EMG) was used to assess the masseter and anterior temporal muscle function. Normality and homogeneity of variances were demonstrated. Descriptive analysis was performed, using the T-test and Chi-square test to compare the characteristics of the groups. A multiple regression model was performed. RESULTS: The ERR group presented more non-functional oral activities related to awake bruxism than the control group, according to OBC (p = 0.027) and EMA (p = 0.035). In addition, the ERR group had higher EMG activity than the control group in rest and isotonic protocols (p < 0.05). CONCLUSIONS: Awake bruxism and greater masticatory muscle activity seem to be related to the presence of ERR in second molars adjacent to impacted mandibular third molars. CLINICAL RELEVANCE: The results of the present study can reinforce the theory that triggering ERR in the second molars adjacent to impacted mandibular third molars may be related to mechanical forces coming from the masticatory function.

Influence of the metal post material, tooth location in the dental arch, and metal artifact reduction tool on vertical root fracture diagnosis in cone beam CT.

This study aimed to evaluate the influence of the metal post composition, tooth location in the dental arch, and metal artifact reduction (MAR) on vertical root fracture (VRF) diagnosis in cone beam computed tomography (CBCT). Twenty-two unirradicular premolars (12 sound and 10 fractured) and two alveolar sockets of a mandible (anterior and posterior regions) composed the sample. CBCT scans of each tooth with a metal post placed into the root canal-silver-palladium (Ag-Pd), cobalt-chromium (Co-Cr), or nickel-chromium (Ni-Cr)-were individually acquired for each mandibular region, and two conditions of MAR, using a OP300 device (Instrumentarium, Finland). Images were assessed by five evaluators independently for VRF detection. Diagnostic values were calculated and compared among all groups using multi-way ANOVA with Tukey post hoc test to investigate the effect of post material, anatomical region, and MAR on VRF diagnosis (α = 0.05). Values of area under the receiver operating curve and specificity were not influenced by the studied factors (p > 0.05). Sensitivity was influenced by the MAR in both mandibular regions (p < 0.05). In the anterior region, sensitivity values increased when the MAR was enabled, regardless of the metal post material (p < 0.05). Similar behavior was noticed in the posterior region for Ni-Cr (p < 0.05) but not for Ag-Pd and Co-Cr posts (p > 0.05). The MAR improved the sensitivity in VRF diagnosis for all tested metal posts in the mandibular anterior region and for the Ni-Cr post in the mandibular posterior region. Therefore, for images obtained in the OP300 CBCT device, activation of the MAR is suggested in these cases.

Do voxel size and filter application on CBCT images improve the diagnosis of condylar morphological alterations? An ex vivo study.

BACKGROUND: There is no established protocol for the low doses of cone-beam computed tomography (CBCT) acquisition and filter application on the diagnosis of condylar morphological alterations. OBJECTIVES: The objective of the study was to evaluate the influence of voxel size and filter application on the diagnosis of condylar morphological alterations in CBCT using an ex vivo model. METHODS: CBCT scans of 36 temporomandibular joints were acquired using OP300 Maxio with voxel sizes of 0.085, 0.125 and 0.280 mm. Three radiologists evaluated the condyles in the CBCT volumes under three filter modes: no filter, '1x' sharpen filter and '2x' sharpen filter. The area under the ROC curve, sensitivity and specificity were calculated by comparing the evaluators' responses with the reference standard and compared among experimental groups using analysis of variance (ANOVA) (α = 5%). RESULTS: The area under the ROC curve, sensitivity and specificity were not affected by voxel size and filter application (p > .05). For osteophyte and flattening, there were more true-positive responses in smaller voxel size. For erosion, the increase of true- and false-positive responses occurred with a larger voxel size. Overall, there was a tendency to decrease true positives for osteophyte and erosion and increase false positives for flattening with the '2x' sharpen filter. CONCLUSIONS: The diagnosis of condylar morphological alterations assessed in this ex vivo analysis is not influenced by the voxel size and the application of the filters. However, attention is needed with the occurrence of false-positive diagnosis with a larger voxel size for erosion and '2x' sharpen filter for flattening.

Convolutional neural network-based automated maxillary alveolar bone segmentation on cone-beam computed tomography images.

OBJECTIVES: To develop and assess the performance of a novel artificial intelligence (AI)-driven convolutional neural network (CNN)-based tool for automated three-dimensional (3D) maxillary alveolar bone segmentation on cone-beam computed tomography (CBCT) images. MATERIALS AND METHODS: A total of 141 CBCT scans were collected for performing training (n = 99), validation (n = 12), and testing (n = 30) of the CNN model for automated segmentation of the maxillary alveolar bone and its crestal contour. Following automated segmentation, the 3D models with under- or overestimated segmentations were refined by an expert for generating a refined-AI (R-AI) segmentation. The overall performance of CNN model was assessed. Also, 30% of the testing sample was randomly selected and manually segmented to compare the accuracy of AI and manual segmentation. Additionally, the time required to generate a 3D model was recorded in seconds (s). RESULTS: The accuracy metrics of automated segmentation showed an excellent range of values for all accuracy metrics. However, the manual method (95% HD: 0.20 ± 0.05 mm; IoU: 95% ± 3.0; DSC: 97% ± 2.0) showed slightly better performance than the AI segmentation (95% HD: 0.27 ± 0.03 mm; IoU: 92% ± 1.0; DSC: 96% ± 1.0). There was a statistically significant difference of the time-consumed among the segmentation methods (p < .001). The AI-driven segmentation (51.5 ± 10.9 s) was 116 times faster than the manual segmentation (5973.3 ± 623.6 s). The R-AI method showed intermediate time-consumed (1666.7 ± 588.5 s). CONCLUSION: Although the manual segmentation showed slightly better performance, the novel CNN-based tool also provided a highly accurate segmentation of the maxillary alveolar bone and its crestal contour consuming 116 times less than the manual approach.

Does low bone mineral density have an association with head and neck soft tissue calcifications?

OBJECTIVES: To evaluate whether low bone mineral density (BMD) has an association with the presence of head and neck soft tissue calcifications (STC), aging, and impaired mandibular canal cortices visibility. MATERIALS AND METHODS: Panoramic radiographs of 1000 women aged between 50 and 75 years old were evaluated by two examiners to classify BMD using mandibular cortical index (C1- normal, C2-moderately eroded and C3-severely eroded), the presence of STC, and also the mandibular canal cortices visibility at the ramus region. Chi-square test evaluated the association between the variables (α = 5%). RESULTS: There was no association between bone loss and the presence of head and neck soft tissue calcifications, except for calcified thyroid cartilage, which was less visualized at C3 group than others (p < 0.05). Women aged 61 to 70 years old presented higher bone loss than those between 50 and 60 (p < 0.05). The mandibular canal was more poorly visualized at C3 group than C1 and C2 (p < 0.05). CONCLUSIONS: In general, no association between BMD and the presence of STC was found. However, greater bone loss had a positive correlation with aging and impaired mandibular canal cortices visibility. CLINICAL RELEVANCE: No relationship between bone mineral density and the existence of soft tissue calcifications was found. Nevertheless, increased bone loss was positively associated with aging and a reduced mandibular canal cortices visibility. This finding highlights the clinical importance of considering bone density factors when planning treatment strategies for patients with related disorders.

Radiographic evaluation of mandibular third molars: an ex vivo comparative study between multilayer and conventional panoramic radiography.

OBJECTIVES: To compare the multilayer panoramic radiography (MPAN) and conventional panoramic radiography (CPAN) in the evaluation of mandibular third molars using cone-beam computed tomography (CBCT) as a reference. METHODS: CPAN, MPAN, and CBCT scans from 33 dry human mandibles were acquired using the OP300 Maxio unit, totalizing 56 mandibular third molars to be evaluated. Three examiners evaluated each third molar according to their position, depth of impaction in the mandibular ramus, proximity between the dental root apexes and the mandibular canal, and the presence of radiographic signs of proximity to the mandibular canal. In addition, when there was a distance between the root apexes and the mandibular canal, it was measured. As a reference, these same parameters were assessed in the CBCT scans by a fourth examiner. For the statistical analysis, the weighted Kappa, Bland Altman, and Wilcoxon tests were performed (α = 0.05). RESULTS: The agreement between the assessments performed in the panoramic modalities with the CBCT ranged from 66.1% to 100.0% for the categorical variables. Overall, the agreement values of CPAN and MPAN with CBCT were similar. The distances between the dental root apex and the mandibular canal for both CPAN and MPAN were significantly underestimated compared to CBCT (p < 0.05). The intra- and interexaminer agreements of the examiners ranged from poor to almost perfect; in general, the agreements were higher in the evaluation performed in the MPAN than in the CPAN. CONCLUSIONS: The MPAN performs similarly to CPAN for evaluating mandibular third molars and their proximity relationship to the mandibular canal. CLINICAL RELEVANCE: Preoperative evaluation of lower mandibular third molars is usually performed using CPAN. Recently, a new tool, MPAN, was developed, which has not yet been tested for the evaluation of mandibular third molars and showed similar performance to CPAN in the present study. Future studies using MPAN are encouraged to evaluate other diagnostic tasks.

Do cone-beam computed tomography low-dose protocols affect the evaluation of the temporomandibular joint?

BACKGROUND: There is no established acquisition protocol based on scientific evidence for the acquisition of cone-beam computed tomography (CBCT) exams to evaluate the temporomandibular joint (TMJ). OBJECTIVES: To evaluate the influence of acquisition protocols and jaw positioning on the diagnostic accuracy of TMJ condylar morphological alterations (CMA), dimension, position and excursion. METHODS: Thirty-six TMJs on 18 dry skulls were imaged using a CBCT unit (OP300 Maxio, Instrumentarium, Tuusula, Finland) at two exposure settings (4.5 and 6.3 mA), three voxel resolutions (0.085, 0.125 and 0.280 mm), three jaw positions (concentric, anteriorised and posteriorised) and three jaw excursions (normoexcursion, hyperexcursion and hypoexcursion). The macroscopic anatomy examination and high-resolution CBCT images were used as ground truth for CMA. Twenty-five TMJs had at least one CMA with 11 healthy TMJs serving as controls. Three experienced oral and maxillofacial radiologists evaluated the parasagittal images for the presence of CMA, position and excursion and measured dimensions. The area under the ROC curve, sensitivity and specificity were calculated. Weighted Kappa (α = 0.05) was used to determine intra- and interexaminer reliability and comparisons between dependent variables analysed by Analysis of Variance at an a prior level of significance of 0.05. RESULTS: The agreement of the evaluation of the position and excursion with the reference standard was high, independent of the protocol (range, 0.75-0.91). Various combinations of acquisition protocols and jaw position did not influence the CMA evaluation. Erosion was overdiagnosed in protocols with larger voxel sizes and the detection of osteophytes greater in images with smaller voxel sizes. The anteroposterior dimension was greater in the open jaw position (p < .05). CONCLUSION: CBCT protocols using reduced radiation exposure from the CBCT machine evaluated in this study can be used to assess condylar morphology, dimension, position and excursion, without compromising diagnostic performances for these parameters.

Do the location and dimensions of the mental foramen differ among individuals of different facial types and skeletal classes? A CBCT study.

STATEMENT OF PROBLEM: Knowledge about the location and dimensions of the mental foramen is important for surgical planning and implant placement in the posterior mandibular region. PURPOSE: The purpose of this clinical study was to assess the location and dimensions of the mental foramen in individuals of different facial type, skeletal class, and sex by means of cone beam computed tomography (CBCT) images. MATERIAL AND METHODS: CBCT images of 142 individuals (72 women and 70 men) were classified according to the facial type (dolichocephalic, mesocephalic, or brachycephalic) and skeletal class (I, II, or III). The vertical and horizontal locations of each mental foramen were evaluated on panoramic reconstructions, and the greatest height and width of the mental foramen were determined on multiplanar reconstructions. Also, the distances from the mental foramen to the alveolar crest and to the inferior cortex of the mandible were obtained. The data were compared by using the Kruskal-Wallis test and multiway analysis of variance (α=.05). RESULTS: The facial type, skeletal class, and sex did not influence the vertical (P=1.00) or the horizontal (P>.15) location of the mental foramen. The most frequent location of the mental foramen was between the first and second premolars and below their apices. The dimensions of the mental foramen were not influenced by the studied factors in men (P>.07); conversely, the mental foramen dimensions were influenced for women (P<.03). CONCLUSIONS: The most frequent location of the mental foramen was between the first and second premolars and below their apices. An influence of the facial type and skeletal class was observed on the dimensions of the mental foramen in women.

Tridimensional assessment of the mandibular angle in patients with different skeletal patterns by cone-beam computed tomography scans: a retrospective study.

BACKGROUND: Since the muscles of chewing are involved in the region of the mandibular angle, important structures in surgical and orthodontic procedures, to study its morphological aspects and the possible influence of different patterns of skeletal development would be of interest. Thus, this study aimed to assess the influence of patient characteristics - such as sex, skeletal malocclusion (Class I, Class II, and Class III) and facial type (brachycephalic, mesocephalic, and dolichocephalic) - on the width, height, thickness, and volume of the mandibular angle, using cone-beam computed tomography (CBCT) scans. METHODS: CBCT scans were assessed - 144 men and 154 women, total of 298 - and classified according to skeletal patterns (skeletal malocclusions and facial types). Width, height, and thickness of the mandibular angle were measured using OnDemand 3D software. The volumetric measures of the mandibular angle were obtained using the ITK-SNAP software. Analysis of Variance (multiway ANOVA) with Tukey's post-hoc test compared the data, with a 5% significance level. RESULTS: Among the factors studied, sex significantly influenced all the analyzed variables (height, width, thickness, and volume of the mandibular angle) (p < 0.05); in general, male individuals presented higher values than females. In some cases, the skeletal malocclusion and facial type factors influenced only the width and height variables (p < 0.05); in general, the Class III and dolichocephalic individuals presented higher values in relation to the other types of skeletal malocclusions and facial types. CONCLUSIONS: Variations in the craniofacial growth pattern, considering the different skeletal malocclusions and facial types, had some influence in the width and height dimensions of the mandibular angle. Furthermore, sex influenced all the studied variables.

Influence of sharpening filters on the detection of root fractures using low-dose cone-beam computed tomography.

OBJECTIVES: To evaluate the influence of sharpening filters in the detection of root fractures using low-dose cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Eighty-four CBCT volumes acquired at three mA levels of 28 teeth inserted in the dental socket of dry human skull were selected from a previous study. The teeth were divided into four groups according to the presence and absence of root fracture and endodontic filling. Five radiologists evaluated all CBCT volumes for the presence of root fracture with and without the application of "Sharpen 1x" and "Sharpen 2x" filters in OnDemand3D software. Area under the ROC curve (AUC), sensitivity, specificity, and inter- and intra-observer concordance were calculated and compared (α = 0.05). RESULTS: Sharpening filters did not lead to significant differences in AUC, sensitivity, and specificity at the three mA levels tested (p > 0.05), regardless of the presence of endodontic filling (p > 0.05). However, the significant reduction of AUC observed in CBCT volumes at 4 mA without filter (p < 0.05) ceased to exist after the application of filters (p > 0.05). Sensitivity and specificity ranged from low and moderate. CONCLUSIONS: The use of sharpening filters can be recommended in CBCT volumes at 4 mA for root fracture detection for leading to the same performance as those at 6.3 and 10 mA. The presence of endodontic filling material did not influence the action of filters in the diagnosis of root fracture. CLINICAL RELEVANCE: Sharpening filters seem to contribute to the diagnosis of root fracture in CBCT volumes acquired with reduced radiation dose.

Prevalence and features of elongated styloid process on imaging studies: a systematic review and meta-analysis.

OBJECTIVE: To determine the prevalence of the elongated styloid process (ESP) and its characteristics, such as sex and age of the patient, unilateral and bilateral incidence, besides variations between different populations and panoramic and CBCT examinations. MATERIALS AND METHODS: A search was performed in six databases (PubMed, Web of Science, Scopus, Cochrane, Lilacs, and Embase) to identify observational studies that used imaging exams and assessed ESP prevalence among panoramic radiograph CBCT examinations, whose transversal prevalence studies were included. Furthermore, studies with a specific group of patients or symptomatic patients were excluded. Additionally, Joanna Briggs Institute checklist was used to evaluate the quality of the studies. A meta-analysis was conducted, then subgroup analyses were performed by grouping studies according to the secondary outcomes, with a significance level set at 5%. The Grading of Recommendations Assessment, Development, and Evaluation system was used to rate the certainty in the evidence. RESULTS: The initial search resulted in 1635 studies, from which 39 articles met the inclusion criteria, encompassing 50,655 participants. The sample size varied between 82 and 5,000 participants. The prevalence of the ESP ranged from 1.3 to 94.8%, with an overall prevalence of 30.2%. The bilateral occurrence was higher than the unilateral one, but no significant predilection was observed according to sex, age, or population. The type of imaging examination also showed no difference in its detection. CONCLUSION: The overall prevalence of ESP was 30.2%, with a propensity for bilaterality, but not for any sex, age, or population geographic location. The imaging examination modality did not influence the diagnosis of ESP. However, the quality level of the studies evaluated was very low, demonstrating the need for more homogeneous primary studies on the prevalence of the ESP with a more standardized methodology. CLINICAL RELEVANCE: There is no consensus in the literature regarding the prevalence of the ESP and the characteristics of the affected patients that can cause chronic and debilitating discomfort in the head and neck region. Therefore, knowledge about the prevalence and characteristics of this condition would help dental clinicians reach the correct diagnosis.

Comparison of the expression of the volumetric alteration artifact in cylindrical and triangular fields of view in two cone-beam computed tomography devices.

OBJECTIVE: To compare the expression of the volumetric alteration (VA) artifact between cylindrical and convex triangular fields of view (FOVs) using high-density materials in different positions in two cone-beam computed tomography (CBCT) devices. MATERIALS AND METHODS: Cylinders of five high-density materials (amalgam, chromium-cobalt, gutta-percha, titanium, and zirconium) with known physical volume were individually submitted to CBCT acquisition in four positions inside a polymethylmethacrylate phantom using two different FOV shapes (convex triangular and cylindrical) on the Veraviewepocs® R100 (R100) and Veraview® X800 (X800) devices. Two oral radiologists obtained the tomographic volumes by segmenting each cylinder. The difference between the tomographic and physical volumes corresponded to the VA. These values were analyzed by intraclass correlation coefficient and analysis of variance for repeated measures with Tukey post hoc test (α = 5%). RESULTS: The FOV influenced the VA only in the X800 device (p = 0.014): the VA in the triangular FOV was greater than in the cylindrical FOV. The VA in the triangular FOV of the X800 device was greater than the R100 device (p < 0.0001). The material influenced the expression of the VA only in the R100 device (p < 0.0001); gutta-percha presented the highest VA, being underestimated, and differing from the other materials (p < 0.01). CONCLUSION: The triangular FOV increased the VA of high-density materials in the X800 device. CLINICAL RELEVANCE: It is important to know if there is an influence on the volumetric alteration artifact of dental materials due to the different image formation geometry in the convex triangular FOV.

Classification and Morphological Analysis of the Hard Palate in Cone-Beam Computed Tomography Scans: A Retrospective Study.

PURPOSE: As the hard palate is a central structure of the skull and is involved in orthodontic and surgical procedures, it would be of interest to study the morphological aspects of this bone and its possible variations as per different patterns of skeletal development. Thus, this study aimed to develop a classification for the different morphological characteristics of the hard palate and to evaluate the relationship between these characteristics and the different skeletal patterns, using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: This retrospective and cross-sectional study used CBCT scans of patients seen from January 2014 to December 2016. Carestream Dental 3D Imaging software was applied to classify each patient according to vertical and sagittal skeletal patterns, and to evaluate the 3 morphological characteristics of the hard palate: depth (flat, regular, or deep), inclination (superior, parallel, or inferior), and presence of a bony projection (S-shaped). χ2 and Fisher's exact tests evaluated the relationship between the hard palate characteristics and the different skeletal patterns. RESULTS: A total of 298 CBCT scans (144 males and 154 females) were evaluated. The depth of the hard palate was significantly related to both skeletal patterns in males (P < .05), with Class II and dolichocephalics presenting a greater amount of deep palates, while classes I and III and brachycephalics had a greater amount of regular palates. The inclination of the hard palate was significantly associated with the facial type in females (P < .05), with brachycephalics and mesocephalics presenting a greater amount of parallel palates, whereas dolichocephalics had a greater number of inferiorly inclined palates. Regarding the presence of the S-shape in the hard palate, there was a greater number of this projection in Class II males and brachycephalic females. CONCLUSIONS: A morphological classification for the hard palate was developed. The morphology of the hard palate varied among the different skeletal patterns.

Application of image processing techniques to aid in the detection of vertical root fractures in digital periapical radiography.

OBJECTIVES: To present an image processing framework to improve the detection of vertical root fractures (VRFs) in digital periapical radiography. MATERIALS AND METHODS: Thirty endodontically treated human teeth (15 of them fractured with a metal post inserted into them, and 15 for the control) were enclosed in a dry mandible and radiographed individually. The proposed framework was applied to the raw data, as a preprocessing step, and was composed of four stages: geometric adjustment and negative, denoising, adaptive contrast enhancement, and gamma correction. The contrast-to-noise ratio (CNR) and sharpness of the image's VRF region were used for the objective evaluation of the method. In addition, five examiners evaluated the original and enhanced images, using a 5-point scale to assess confidence. RESULTS: The objective results showed that the proposed framework increased the CNR of the VRF region by 173% compared to the standard preprocessing method provided by the detector's manufacturer. The results found by the human observers indicated that the area under the curve (AUC) and sensitivity of the diagnosis of VRF significantly increased by 4% and 17% (p ≤ 0.05), respectively, when the examiners evaluated the image with the proposed method concomitantly with the image available in the commercial software. However, the specificity was reduced. CONCLUSIONS: The proposed image processing framework can be used as an additional tool to that provided by the manufacturer to increase the sensitivity and AUC of the diagnosis of VRF. CLINICAL RELEVANCE: The proposed method can be easily used in clinical practice to aid VRF detection, since it does not incur high computational costs and does not increase the radiation dose applied to the patient.

Do the number of basis images and metal artifact reduction affect the production of artifacts near and far from zirconium dental implants in CBCT?

OBJECTIVES: This study aimed to evaluate the influence of the number of basis images and the metal artifact reduction (MAR) tool on the production of artifacts near and far from a zirconium implant in cone-beam computed tomography (CBCT). MATERIALS AND METHODS: CBCT scans of a mandible were acquired before and after insertion of an implant, using 450 and 720 basis images, with and without MAR activation. The mean and standard deviation (SD) of the gray values of the regions of interest (ROIs) located on the cortices adjacent to the implant and at different distances from it (in the soft tissue) were calculated. The mean of the gray values was used to calculate the absolute contrast difference (ACD) between the control and implant scans. RESULTS: In general, the number of basis images did not affect the SD and the ACD values of the buccal and lingual ROIs (p > 0.05). The implant increased the SD in the lingual cortical plate (p < 0.05). In this case, MAR activation decreased SD (p < 0.05). All ROIs located at different distances from the implant showed higher SD on scans acquired with 450 basis images (p < 0.05), regardless of MAR condition. CONCLUSIONS: A higher number of basis images reduces the magnitude of artifacts but does not influence the image quality in bone cortical plates. MAR improves the image in the areas most affected by artifacts. CLINICAL RELEVANCE: The number of basis images is known as a factor capable of influencing the image quality and radiation dose for the patient. Therefore, it is important to investigate its effect on the expression of artifacts in the CBCT images.

Does the administration of meloxicam before head and neck radiotherapy reduce the risk of mandibular osteoradionecrosis? An animal model study.

OBJECTIVE: To assess whether the administration of meloxicam before head and neck radiotherapy reduces the risk of mandibular osteoradionecrosis in rats. MATERIAL AND METHODS: Sixty male Wistar rats were randomly divided into 6 groups (n = 10) according to the meloxicam administration and radiation therapy: control (C), irradiated (I), single dose of meloxicam (M1), single dose of meloxicam and irradiated (M1I), triple dose of meloxicam (M3), triple dose of meloxicam and irradiated (M3I). Meloxicam was administrated (20 mg/kg per dose) 1 h before the radiation therapy (single dose of 20 Gy) and 24 h and 48 h after the radiation therapy for groups with two additional doses. Ten days after the radiation therapy, the three right mandibular molars were extracted from all rats, who were euthanatized after 21 or 35 days (n = 5 per group). The mandibles were assessed by macroscopic evaluation and micro-CT analysis. RESULTS: The right hemimandibles of the irradiated groups revealed macroscopic signs of osteoradionecrosis, and those of the non-irradiated groups revealed complete gingival healing. A significant delay in alveolar socket healing in all irradiated groups was observed in the micro-CT assessment regardless meloxicam treatment. CONCLUSION: The administration of meloxicam before head and neck radiotherapy does not reduce the risk of mandibular osteoradionecrosis when associated to dental extractions. CLINICAL RELEVANCE: Since meloxicam has been shown to be a potential radiation-protective agent, and osteoradionecrosis physiopathology is believed to be related to an inflammatory process, possible interactions are relevant to be investigated.

Do the dimensions of the hard palate have a relationship with the volumes of the upper airways and maxillary sinuses? A CBCT study.

BACKGROUND: As the hard palate is a central structure of the skull, and its close relationship with the nasal cavity, oral cavity, and maxillary sinuses, it would be of interest to study if there is a relationship between this bone and other structures of the stomatognathic system. Thus, this study aimed to assess the dimensions of the hard palate and associate them with sex, and skeletal and breathing patterns. Also, to investigate if there is a relationship between these dimensions and the volumes of the upper airways and maxillary sinuses. METHODS: Two hundred and ninety-eight CBCT scans of patients were classified according to sex, and skeletal and breathing patterns. Then, the linear dimensions of width and height of the hard palate at the regions of the first premolars and first molars, and the volumes of the upper airways and maxillary sinuses were measured using the CS 3D Imaging and ITK-SNAP software, respectively. Data were submitted to multi-way analysis of variance and linear regression, with a significance level of 5% (α = 0.05). RESULTS: Sex and facial type influenced the hard palate dimensions (p < 0.05). Males had greater width and height of the hard palate than females (p < 0.0001). It was observed greater width for brachycephalics at the first premolars region (p = 0.0032), and greater height for dolichocephalics at the first premolars (p = 0.0154) and first molars (p = 0.0038) regions. Skeletal malocclusion and breathing pattern did not influence the measurements of the hard palate (p > 0.05). There was a significant relationship between the width and height of the hard palate at the premolar's region and the total volume of the upper airways (p = 0.018, and p = 0.038), and between both dimensions of the hard palate at the molar's region and the total volume of the maxillary sinuses (p < 0.0001). CONCLUSIONS: The hard palate dimensions are influenced by sex and facial type, but not by skeletal malocclusion or breathing pattern. Also, there is an association between these dimensions and the volumes of the upper airways and maxillary sinuses.

Variations in pulp volume between normotensive and hypertensive individuals on CBCT imaging.

OBJECTIVES: To compare the pulp volume of individuals with altered and normal systemic blood pressure (BP) in order to verify if high BP promotes dimensional modifications in the pulp space. MATERIALS AND METHODS: Cone beam computed tomography scans of 91 patients (49 females and 42 males, mean age 31.7 ± 6.38 years) who had a healthy maxillary canine were selected. Values of arterial BP measured at two dental visits were used to classify the sample as normal BP (< 130 × 80 mmHg) and altered BP (≥ 130 × 80 mmHg); 49 patients had normal BP and 42 had altered BP. One oral radiologist evaluated each patient's pulp and tooth volumes, using semi-automatic segmentation, and the tooth length. Data were submitted to Student's t test and logistic regression, with a significance level of 5% (p < 0.05). RESULTS: Pulp volume (p = 0.0027), pulp volume/tooth volume (p = 0.0013), and pulp volume/tooth length (p = 0.0007) ratios were greater in the altered BP group. Conversely, there was no difference in tooth volume between the groups (p = 0.0697). A logistic regression model (p = 0.0002) using pulp volume and age enabled the development of a formula for predicting altered BP, with 68% accuracy. CONCLUSIONS: Individuals with altered systemic BP have greater pulp volumes than those with normal BP. The formula developed in this study may indicate the presence of altered BP. CLINICAL RELEVANCE: As arterial hypertension is a silent disease that produces no warning signs or symptoms, identification of modifications in the pulp volume in cone beam computed tomography scans may be an adjuvant sign of the diagnosis of this disease.

C-shaped canals in mandibular molars of a Brazilian subpopulation: prevalence and root canal configuration using cone-beam computed tomography.

OBJECTIVES: To assess C-shaped root canal configuration by identifying its prevalence and each configuration type proportion, according to tooth (mandibular first or second molar) and demographic characteristics in a Brazilian population, using cone-beam computed tomography (CBCT). Moreover, it was verified if there is a relationship between root canal configuration observed in two-dimensional reconstructions of CBCT and presence of C-shape. METHODS: Mandibular jaw CBCT scans (184 males and 220 females, aged 15 to 80 years), which presented 1464 mandibular molars (710 first molars and 754 second molars), were assessed. Teeth were evaluated for the presence and type of C-shaped root canals by observing the roots at five levels in CBCT axial reconstructions. Root canal configuration was assessed in panoramic reconstructions. Data were statistically analyzed at a significance level of 5%. RESULTS: Of the 1464 mandibular molars, 125 (8.5%) were classified as C-shaped. This variation was more prevalent in females (n = 107, 85.6%) and in second molars (n = 108, 86.4%). C1 (uninterrupted C-shaped canal) was the most prevalent type of C-shaped configuration (41.76%), while C5 (no canal lumen) was the least prevalent type (0.96%). Single root with single canal in panoramic reconstructions was the most predominant configuration for C-shaped teeth (n = 54, 43.2%). Fused roots presented 17.2 higher odds of being associated with C-shaped root canals than non-fused roots. CONCLUSIONS: C-shaped root canals were more prevalent in mandibular second molars and in females. Additionally, clinicians should bear in mind the greater possibility of C-shaped configuration in mandibular molars with fused roots. CLINICAL RELEVANCE: Mandibular molars with C-shaped canals present a clinical challenge. A higher C-shaped proportion was noted in radiographic fused root types, which had 17.2 higher odds of presenting such anatomy when compared to radiographic non-fused roots. Root radiographic features may help in diagnosis of complex C-shaped morphologies.